listbot integration

.env

@@ -1,125 +0,0 @@
-# T-Pot config file. Do not remove.
-
-###############################################
-# T-Pot Base Settings - Adjust to your needs. #
-###############################################
-
-# Set Web usernames and passwords here. This section will be used to create / update the Nginx password file nginxpasswd.
-#  <empty>: This is the default
-#  <base64 encoded htpasswd usernames / passwords>:
-#   Use 'htpasswd -n -b "username" "password" | base64 -w0' to create the WEB_USER if you want to manually deploy T-Pot, run 'install.sh' to automatically add a user during installation, or 'genuser.sh' if you just want to add a web user.
-#   Example: 'htpasswd -n -b "tsec" "tsec" | base64 -w0' will print dHNlYzokYXByMSRYUnE2SC5rbiRVRjZQM1VVQmJVNWJUQmNmSGRuUFQxCgo=
-#   Copy the string and replace WEB_USER=dHNlYzokYXByMSRYUnE2SC5rbiRVRjZQM1VVQmJVNWJUQmNmSGRuUFQxCgo=
-#   Multiple users are possible:
-#   WEB_USER=dHNlYzokYXByMSRYUnE2SC5rbiRVRjZQM1VVQmJVNWJUQmNmSGRuUFQxCgo= dHNlYzokYXByMSR6VUFHVWdmOCRROXI3a09CTjFjY3lCeU1DTloyanEvCgo=
-WEB_USER=
-
-# Set Logstash Web usernames and passwords here. This section will be used to create / update the Nginx password file lswebpasswd.
-# The Lostsash Web usernames are used for T-Pot log ingestion via Logstash, each sensor should have its own user.
-#  <empty>: This is empty by default.
-#  <'htpasswd encoded usernames / passwords'>:
-#   Use 'htpasswd -n -b "username" "password" | base64 -w0' to create the LS_WEB_USER if you want to manually deploy the sensor.
-#   Example: 'htpasswd -n -b "sensor" "sensor" | base64 -w0' will print c2Vuc29yOiRhcHIxJGVpMHdzUmdYJHNyWHF4UG53ZzZqWUc3aEFaUWxrWDEKCg==
-#   Copy the string and replace / add LS_WEB_USER=c2Vuc29yOiRhcHIxJGVpMHdzUmdYJHNyWHF4UG53ZzZqWUc3aEFaUWxrWDEKCg==
-#   Multiple users are possible:
-#   LS_WEB_USER=c2Vuc29yMTokYXByMSQ5aXhNRk5yMCR6d3F2dGFwQ2x0cFBhU1pqMm9ZemYxCgo= c2Vuc29yMjokYXByMSRtYTlOS1J2NCQvU3dsVVBMeW5RaVIyM3pyWVAzOUkwCgo=
-LS_WEB_USER=
-
-# T-Pot Blackhole
-#  ENABLED: T-Pot will download a db of known mass scanners and nullroute them.
-#           Be aware, this will put T-Pot off the map for stealth reasons and
-#           you will get less traffic. Routes will be active until next reboot
-#           and will be re-added with every T-Pot start until disabled.
-#  DISABLED: This is the default and no stealth efforts are in place.
-TPOT_BLACKHOLE=DISABLED
-
-# T-Pot Persistence
-#  on: This is the default. T-Pot will keep the honeypot logfiles and rotate
-#      with logrotate for 30 days.
-#  off: This is recommended for Raspberry Pi or setups with weaker CPUs or
-#       if you just do not need any of the logfiles.
-TPOT_PERSISTENCE=on
-
-# T-Pot Type
-#  HIVE: This is the default and offers everything to connect T-Pot sensors.
-#  SENSOR: This needs to be used when running a sensor. Be aware to adjust all other
-#          settings as well.
-#          1. You will need to copy compose/sensor.yml to ./docker-comopose.yml
-#          2. From HIVE host you will need to copy ~/tpotce/data/nginx/cert/nginx.crt to
-#             your SENSOR host to ~/tpotce/data/hive.crt
-#          3. On HIVE: Create a web user per SENSOR on HIVE and provide credentials below
-#             Create credentials with 'htpasswd ~/tpotce/data/nginx/conf/lswebpasswd <username>'
-#          4. On SENSOR: Provide username / password from (3) for TPOT_HIVE_USER as base64 encoded string:
-#                        "echo -n 'username:password' | base64 -w0"
-TPOT_TYPE=HIVE
-
-# T-Pot Hive User (only relevant for SENSOR deployment)
-#  <empty>: This is empty by default.
-#  <base64 encoded string>: Provide a base64 encoded string "echo -n 'username:password' | base64 -w0"
-#                           i.e. TPOT_HIVE_USER='dXNlcm5hbWU6cGFzc3dvcmQ='
-TPOT_HIVE_USER=
-
-# T-Pot Hive IP (only relevant for SENSOR deployment)
-#  <empty>: This is empty by default.
-#  <IP, FQDN>: This can be either a IP (i.e. 192.168.1.1) or a FQDN (i.e. foo.bar.local)
-TPOT_HIVE_IP=
-
-# T-Pot AttackMap Text Output
-#  ENABLED: This is the default and the docker container map_data will print events to the console.
-#  DISABLED: Printing events to the console is disabled.
-TPOT_ATTACKMAP_TEXT=ENABLED
-
-# T-Pot AttackMap Text Output Timezone
-#  UTC: (T-Pot default) This is usually the best option.
-#  Continent/City: In Linux you can check our timezone with `readlink` /etc/localtime or
-#                  see the full list here: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
-#  Examples: America/New_York, Asia/Taipei, Australia/Melbourne, Europe/Athens, Europe/Berlin
-TPOT_ATTACKMAP_TEXT_TIMEZONE=UTC
-
-###################################################################################
-# Honeypots / Tools settings
-###################################################################################
-# Some services / tools offer adjustments using ENVs which can be adjusted here.
-###################################################################################
-
-# Suricata ET Pro ruleset
-#  OPEN: This is the default and will the ET Open ruleset
-#  OINKCODE: Replace OPEN with your Oinkcode to use the ET Pro ruleset
-OINKCODE=OPEN
-
-
-###################################################################################
-# NEVER MAKE CHANGES TO THIS SECTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!!! #
-###################################################################################
-
-# docker.sock Path
-TPOT_DOCKER_SOCK=/var/run/docker.sock
-
-# docker compose .env
-TPOT_DOCKER_ENV=./.env
-
-# Docker-Compose file
-TPOT_DOCKER_COMPOSE=./docker-compose.yml
-
-# T-Pot Docker Repo
-#  Depending on where you are located you may choose between DockerHub and GHCR
-#  dtagdevsec: This will use the DockerHub image registry
-#  ghcr.io/telekom-security: This will use the GitHub container registry
-TPOT_REPO=dtagdevsec
-
-# T-Pot Version Tag
-TPOT_VERSION=24.04
-
-# T-Pot Pull Policy
-#  always: (T-Pot default) Compose implementations SHOULD always pull the image from the registry.
-#  never: Compose implementations SHOULD NOT pull the image from a registry and SHOULD rely on the platform cached image.
-#  missing: Compose implementations SHOULD pull the image only if it's not available in the platform cache.
-#  build: Compose implementations SHOULD build the image. Compose implementations SHOULD rebuild the image if already present.
-TPOT_PULL_POLICY=always
-
-# T-Pot Data Path
-TPOT_DATA_PATH=./data
-
-# OSType (linux, mac, win)
-#  Most docker features are available on linux
-TPOT_OSTYPE=linux

.github/ISSUE_TEMPLATE.md

@@ -0,0 +1,29 @@
+# Issues
+
+Before you post your issue make sure it has not been answered yet and provide `basic support information` if you come to the conclusion it is a new issue:
+- 🔍 Use the [search function](https://github.com/dtag-dev-sec/tpotce/issues?utf8=%E2%9C%93&q=) first
+- 🧐 Check our [WIKI](https://github.com/dtag-dev-sec/tpotce/wiki)
+- 📚 Consult the documentation of 💻 [Debian](https://www.debian.org/doc/), 🐳 [Docker](https://docs.docker.com/), the 🦌 [ELK stack](https://www.elastic.co/guide/index.html) and the 🍯 [T-Pot Readme](https://github.com/dtag-dev-sec/tpotce/blob/master/README.md).
+- **⚠️ Provide [basic support information](#info) or similiar information with regard to your issue or we can not help you and will close the issue without further notice**
+
+<br>
+<br>
+<br>
+
+<a name="info"></a>
+## ⚠️ Basic support information (commands are expected to run as `root`)
+
+- What version of the OS are you currently using `lsb_release -a` and `uname -a`?
+- What T-Pot version are you currently using?
+- What edition (Standard, Nextgen, etc.) of T-Pot are you running?
+- What architecture are you running on (i.e. hardware, cloud, VM, etc.)?
+- Did you have any problems during the install? If yes, please attach `/install.log` `/install.err`.
+- How long has your installation been running?
+- Did you install upgrades, packages or use the update script?
+- Did you modify any scripts or configs? If yes, please attach the changes.
+- Please provide a screenshot of `glances` and `htop`.
+- How much free disk space is available (`df -h`)?
+- What is the current container status (`dps.sh`)?
+- What is the status of the T-Pot service (`systemctl status tpot`)?
+- What ports are being occupied? Stop T-Pot `systemctl stop tpot` and run `netstat -tulpen`
+- If a single container shows as `DOWN` you can run `docker logs <container-name>` for the latest log entries

.github/ISSUE_TEMPLATE/bug-report-for-t-pot.md

@@ -1,42 +0,0 @@
----
-name: Bug report for T-Pot 24.04.x
-about: Bug report for T-Pot 24.04.x
-title: ''
-labels: ''
-assignees: ''
-
----
-
-# Successfully raise an issue
-Before you post your issue make sure it has not been answered yet and provide **⚠️ BASIC SUPPORT INFORMATION** (as requested below) if you come to the conclusion it is a new issue.
-
-- 🔍 Use the [search function](https://github.com/dtag-dev-sec/tpotce/issues?utf8=%E2%9C%93&q=) first
-- 🧐 Check our [Wiki](https://github.com/dtag-dev-sec/tpotce/wiki) and the [discussions](https://github.com/telekom-security/tpotce/discussions)
-- 📚 Consult the documentation of 💻 your Linux OS, 🐳 [Docker](https://docs.docker.com/), the 🦌 [Elastic stack](https://www.elastic.co/guide/index.html) and the 🍯 [T-Pot Readme](https://github.com/dtag-dev-sec/tpotce/blob/master/README.md).
-- **⚠️ Provide [BASIC SUPPORT INFORMATION](#-basic-support-information-commands-are-expected-to-run-as-root) or similar detailed information with regard to your issue or we will close the issue or convert it into a discussion without further interaction from the maintainers**.<br>
-
-# ⚠️ Basic support information (commands are expected to run as `root`)
-
-**We happily take the time to improve T-Pot and take care of things, but we need you to take the time to create an issue that provides us with all the information we need.** 
-
-- What OS are you T-Pot running on?
-- What is the version of the OS `lsb_release -a` and `uname -a`?
-- What T-Pot version are you currently using (only **T-Pot 24.04.x** is currently supported)?
-- What architecture are you running on (i.e. hardware, cloud, VM, etc.)?
-- Review the `~/install_tpot.log`, attach the log and highlight the errors.
-- How long has your installation been running?
-  - If it is a fresh install consult the documentation first.
-  - Most likely it is a port conflict or a remote dependency was unavailable.
-  - Retry a fresh installation and only open the issue if the error keeps coming up and is not resolved using the documentation as described [here](#how-to-raise-an-issue).  
-- Did you install upgrades, packages or use the update script?
-- Did you modify any scripts or configs? If yes, please attach the changes.
-- Please provide a screenshot of `htop` and `docker stats`.
-- How much free disk space is available (`df -h`)?
-- What is the current container status (`dps.sh`)?
-- On Linux: What is the status of the T-Pot service (`systemctl status tpot`)?
-- What ports are being occupied? Stop T-Pot `systemctl stop tpot` and run `grc netstat -tulpen`
-  - Stop T-Pot `systemctl stop tpot`
-  - Run `grc netstat -tulpen`
-  - Run T-Pot manually with `docker compose -f ~/tpotce/docker-compose.yml up` and check for errors
-  - Stop execution with `CTRL-C` and `docker compose -f ~/tpotce/docker-compose.yml down -v`
-- If a single container shows as `DOWN` you can run `docker logs <container-name>` for the latest log entries

.github/ISSUE_TEMPLATE/feature-request-for-t-pot.md

@@ -1,20 +0,0 @@
----
-name: Feature request for T-Pot 24.04.x
-about: Suggest an idea for T-Pot 24.04.x
-title: ''
-labels: ''
-assignees: ''
-
----
-
-**Is your feature request related to a problem? Please describe.**
-A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
-
-**Describe the solution you'd like**
-A clear and concise description of what you want to happen.
-
-**Describe alternatives you've considered**
-A clear and concise description of any alternative solutions or features you've considered.
-
-**Additional context**
-Add any other context or screenshots about the feature request here.

.github/ISSUE_TEMPLATE/general-issue-for-t-pot.md

@@ -1,42 +0,0 @@
----
-name: General issue for T-Pot 24.04.x
-about: General issue for T-Pot 24.04.x
-title: ''
-labels: ''
-assignees: ''
-
----
-
-# Successfully raise an issue
-Before you post your issue make sure it has not been answered yet and provide **⚠️ BASIC SUPPORT INFORMATION** (as requested below) if you come to the conclusion it is a new issue.
-
-- 🔍 Use the [search function](https://github.com/dtag-dev-sec/tpotce/issues?utf8=%E2%9C%93&q=) first
-- 🧐 Check our [Wiki](https://github.com/dtag-dev-sec/tpotce/wiki) and the [discussions](https://github.com/telekom-security/tpotce/discussions)
-- 📚 Consult the documentation of 💻 your Linux OS, 🐳 [Docker](https://docs.docker.com/), the 🦌 [Elastic stack](https://www.elastic.co/guide/index.html) and the 🍯 [T-Pot Readme](https://github.com/dtag-dev-sec/tpotce/blob/master/README.md).
-- **⚠️ Provide [BASIC SUPPORT INFORMATION](#-basic-support-information-commands-are-expected-to-run-as-root) or similar detailed information with regard to your issue or we will close the issue or convert it into a discussion without further interaction from the maintainers**.<br>
-
-# ⚠️ Basic support information (commands are expected to run as `root`)
-
-**We happily take the time to improve T-Pot and take care of things, but we need you to take the time to create an issue that provides us with all the information we need.** 
-
-- What OS are you T-Pot running on?
-- What is the version of the OS `lsb_release -a` and `uname -a`?
-- What T-Pot version are you currently using (only **T-Pot 24.04.x** is currently supported)?
-- What architecture are you running on (i.e. hardware, cloud, VM, etc.)?
-- Review the `~/install_tpot.log`, attach the log and highlight the errors.
-- How long has your installation been running?
-  - If it is a fresh install consult the documentation first.
-  - Most likely it is a port conflict or a remote dependency was unavailable.
-  - Retry a fresh installation and only open the issue if the error keeps coming up and is not resolved using the documentation as described [here](#how-to-raise-an-issue).  
-- Did you install upgrades, packages or use the update script?
-- Did you modify any scripts or configs? If yes, please attach the changes.
-- Please provide a screenshot of `htop` and `docker stats`.
-- How much free disk space is available (`df -h`)?
-- What is the current container status (`dps.sh`)?
-- On Linux: What is the status of the T-Pot service (`systemctl status tpot`)?
-- What ports are being occupied? Stop T-Pot `systemctl stop tpot` and run `grc netstat -tulpen`
-  - Stop T-Pot `systemctl stop tpot`
-  - Run `grc netstat -tulpen`
-  - Run T-Pot manually with `docker compose -f ~/tpotce/docker-compose.yml up` and check for errors
-  - Stop execution with `CTRL-C` and `docker compose -f ~/tpotce/docker-compose.yml down -v`
-- If a single container shows as `DOWN` you can run `docker logs <container-name>` for the latest log entries

.gitignore

@@ -1,5 +0,0 @@
-# Ignore data folder
-data/
-**/.DS_Store
-.idea
-install_tpot.log

CHANGELOG.md

@@ -1,45 +1,188 @@
-# Release Notes / Changelog
+# Changelog
-T-Pot 22.04.0 is probably the most feature rich release ever provided with long awaited (wanted!) features readily available after installation. 
 
-## New Features
+## 20200116
-* **Distributed** Installation with **HIVE** and **HIVE_SENSOR**
+- **Bump ELK to latest 6.8.6**
-* **ARM64** support for all provided Docker images
+- **Update ISO image to fix upstream bug of missing kernel modules**
-* **GeoIP Attack Map** visualizing Live Attacks on a dedicated webpage
+- **Include dashboards for CitrixHoneypot**
-* **Kibana Live Attack Map** visualizing Live Attacks from different **HIVE_SENSORS**
+  - Please run `/opt/tpot/update.sh` for the necessary modifications, omit the reboot and run `/opt/tpot/bin/tped.sh` to (re-)select the NextGen installation type.
-* **Blackhole** is a script trying to avoid mass scanner detection 
+  - This update requires the latest Kibana objects as well. Download the latest from https://raw.githubusercontent.com/dtag-dev-sec/tpotce/master/etc/objects/kibana_export.json.zip, unzip and import the objects within Kibana WebUI > Management > Saved Objects > Export / Import". All objects will be overwritten upon import, make sure to run an export first.
-* **Elasticvue** a web front end for browsing and interacting with an Elastic Search cluster
-* **Ddospot** a honeypot for tracking and monitoring UDP-based Distributed Denial of Service (DDoS) attacks
-* **Endlessh** is a SSH tarpit that very slowly sends an endless, random SSH banner
-* **HellPot** is an endless honeypot based on Heffalump that sends unruly HTTP bots to hell
-* **qHoneypots** 25 honeypots in a single container for monitoring network traffic, bots activities, and username \ password credentials
-* **Redishoneypot** is a honeypot mimicking some of the Redis' functions
-* **SentryPeer** a dedicated SIP honeypot
-* **Index Lifecycle Management** for Elasticseach indices is now being used
 
-## Upgrades
+## 20200115
-* **Debian 11.x** is now being used for the T-Pot ISO images and required for post installs
+- **Prepare integration of CitrixHoneypot**
-* **Elastic Stack 8.x** is now provided as Docker images
+  - Prepare integration of [CitrixHoneypot](https://github.com/MalwareTech/CitrixHoneypot) by MalwareTech
+  - Integration into ELK is still open
+  - Please run `/opt/tpot/update.sh` for the necessary modifications, omit the reboot and run `/opt/tpot/bin/tped.sh` to (re-)select the NextGen installation type.
 
-## Updates
+## 20191224
-* **Honeypots** and **tools** were updated to their latest masters and releases
+- **Use pigz, optimize logrotate.conf**
-* Updates will be provided continuously through Docker Images updates 
+  - Use `pigz` for faster archiving, especially with regard to high volumes of logs - Thanks to @workandresearchgithub!
+  - Optimize `logrotate.conf` to improve archiving speed and get rid of multiple compression, also introduce `pigz`.
 
-## Breaking Changes
+## 20191121
-* For security reasons all Py2.x honeypots with the need of PyPi packages have been removed: **HoneyPy**, **HoneySAP** and **RDPY**
+- **Bump ADBHoney to latest master**
-* If you are upgrading from a previous version of T-Pot (20.06.x) you need to import the new Kibana objects or some of the functionality will be broken or will be unavailabe
+  - Use latest version of ADBHoney, which now fully support Python 3.x - Thanks to @huuck!
-* **Cyberchef** is now part of the Nginx Docker image, no longer as individual image
-* **ElasticSearch Head** is superseded by **Elasticvue** and part the Nginx Docker image
-* **Heimdall** is no longer supported and superseded with a new Bento based landing page
-* **Elasticsearch Curator** is no longer supprted and superseded with **Index Lifecycle Policies** available through Kibana.
 
-# Thanks & Credits
+## 20191113, 20191104, 20191103, 20191028
-* @ghenry, for some fun late night debugging and of course SentryPeer!
+- **Switch to Debian 10 on OTC, Ansible Improvements**
-* @giga-a, for adding much appreciated features (i.e. JSON logging, 
+  - OTC now supporting Debian 10 - Thanks to @shaderecker!
-X-Forwarded-For, etc.) and of course qHoneypots! 
-* @sp3t3rs, @trixam, for their backend and ews support!
-* @tadashi-oya, for spotting some errors and propose fixes!
-* @tmariuss, @shaderecker for their cloud contributions!
-* @vorband, for much appreciated and helpful insights regarding the GeoIP Attack Map!
-* @yunginnanet, on not giving up on squashing a bug and of course Hellpot!
 
-... and many others from the T-Pot community by opening valued issues and discussions, suggesting ideas and thus helping to improve T-Pot!
+## 20191028
+- **Fix an issue with pip3, yq**
+  - `yq` needs rehashing.
+
+## 20191026
+- **Remove cockpit-pcp**
+  - `cockpit-pcp` floods swap for some reason - removing for now.
+
+## 20191022
+- **Bump Suricata to 5.0.0**
+
+## 20191021
+- **Bump Cowrie to 2.0.0**
+
+## 20191016
+- **Tweak installer, pip3, Heralding**
+  - Install `cockpit-pcp` right from the start for machine monitoring in cockpit.
+  - Move installer and update script to use pip3.
+  - Bump heralding to latest master (1.0.6) - Thanks @johnnykv!
+
+## 20191015
+- **Tweaking, Bump glutton, unlock ES script**
+  - Add `unlock.sh` to unlock ES indices in case of lockdown after disk quota has been reached.
+  - Prevent too much terminal logging from p0f and glutton since `daemon.log` was filled up.
+  - Bump glutton to latest master now supporting payload_hex. Thanks to @glaslos.
+
+## 20191002
+- **Merge**
+  - Support Debian Buster images for AWS #454
+  - Thank you @piffey
+
+## 20190924
+- **Bump EWSPoster**
+  - Supports Python 3.x
+  - Thank you @Trixam
+
+## 20190919
+- **Merge**
+  - Handle non-interactive shells #454
+  - Thank you @Oogy
+
+## 20190907
+- **Logo tweaking**
+  - Add QR logo
+
+## 20190828
+- **Upgrades and rebuilds**
+  - Bump Medpot, Nginx and Adbhoney to latest master
+  - Bump ELK stack to 6.8.2
+  - Rebuild Mailoney, Honeytrap, Elasticpot and Ciscoasa
+  - Add 1080p T-Pot wallpaper for download
+
+## 20190824
+- **Add some logo work**
+  - Thanks to @thehadilps's suggestion adjusted social preview
+  - Added 4k T-Pot wallpaper for download
+
+## 20190823
+- **Fix for broken Fuse package**
+  - Fuse package in upstream is broken
+  - Adjust installer as workaround, fixes #442
+
+## 20190816
+- **Upgrades and rebuilds**
+  - Adjust Dionaea to avoid nmap detection, fixes #435 (thanks @iukea1)
+  - Bump Tanner, Cyberchef, Spiderfoot and ES Head to latest master
+
+## 20190815
+- **Bump ELK stack to 6.7.2**
+  - Transition to 7.x must iterate slowly through previous versions to prevent changes breaking T-Pots
+
+## 20190814
+- **Logstash Translation Maps improvement**
+  - Download translation maps rather than running a git pull
+  - Translation maps will now be bzip2 compressed to reduce traffic to a minimum
+  - Fixes #432
+
+## 20190802
+- **Add support for Buster as base image**
+  - Install ISO is now based on Debian Buster
+  - Installation upon Debian Buster is now supported
+
+## 20190701
+- **Reworked Ansible T-Pot Deployment**
+  - Transitioned from bash script to all Ansible
+  - Reusable Ansible Playbook for OpenStack clouds
+  - Example Showcase with our Open Telekom Cloud
+  - Adaptable for other cloud providers
+
+## 20190626
+- **HPFEEDS Opt-In commandline option**
+  - Pass a hpfeeds config file as a commandline argument
+  - hpfeeds config is saved in `/data/ews/conf/hpfeeds.cfg`
+  - Update script restores hpfeeds config
+
+## 20190604
+- **Finalize Fatt support**
+  - Build visualizations, searches, dashboards
+  - Rebuild index patterns
+  - Some finishing touches
+
+## 20190601
+- **Start supporting Fatt, remove Glastopf**
+  - Build Dockerfile, Adjust logstash, installer, update and such.
+  - Glastopf is no longer supported within T-Pot
+
+## 20190528+20190531
+- **Increase total number of fields**
+  - Adjust total number of fileds for logstash templae from 1000 to 2000.
+
+## 20190526
+- **Fix build for Cowrie**
+  - Upstream changes required a new package `py-bcrypt`.
+
+## 20190525
+- **Fix build for RDPY**
+  - Building was prevented due to cache error which occurs lately on Alpine if `apk` is using `--no-ache' as options.
+
+## 20190520
+- **Adjust permissions for /data folder**
+  - Now it is possible to download files from `/data` using SCP, WINSCP or CyberDuck.
+
+## 20190513
+- **Added Ansible T-Pot Deployment on Open Telekom Cloud**
+  - Reusable Ansible Playbooks for all cloud providers
+  - Example Showcase with our Open Telekom Cloud
+
+## 20190511
+- **Add hptest script**
+  - Quickly test if the honeypots are working with `hptest.sh <[ip,host]>` based on nmap.
+
+## 20190508
+- **Add tsec / install user to tpot group**
+  - For users being able to easily download logs from the /data folder the installer now adds the `tpot` or the logged in user (`who am i`) via `usermod -a -G tpot <user>` to the tpot group. Also /data permissions will now be enforced to `770`, which is necessary for directory listings.
+
+## 20190502
+- **Fix KVPs**
+  - Some KVPs for Cowrie changed and the tagcloud was not showing any values in the Cowrie dashboard.
+  - New installations are not affected, however existing installations need to import the objects from /opt/tpot/etc/objects/kibana-objects.json.zip.
+- **Makeiso**
+  - Move to Xorriso for building the ISO image.
+  - This allows to support most of the Debian based distros, i.e. Debian, MxLinux and Ubuntu.
+
+## 20190428
+- **Rebuild ISO**
+  - The install ISO needed a rebuilt after some changes in the Debian mirrors.
+- **Disable Netselect**
+  - After some reports in the issues that some Debian mirrors were not fully synced and thus some packages were unavailable the netselect-apt feature was disabled.
+
+## 20190406
+- **Fix for SSH**
+  - In some situations the SSH Port was not written to a new line (thanks to @dpisano for reporting).
+- **Fix race condition for apt-fast**
+  - Curl and wget need to be installed before apt-fast installation.
+
+## 20190404
+- **Fix #332**
+  - If T-Pot, opposed to the requirements, does not have full internet access netselect-apt fails to determine the fastest mirror as it needs ICMP and UDP outgoing. Should netselect-apt fail the default mirrors will be used.
+- **Improve install speed with apt-fast**
+  - Migrating from a stable base install to Debian (Sid) requires downloading lots of packages. Depending on your geo location the download speed was already improved by introducing netselect-apt to determine the fastest mirror. With apt-fast the downloads will be even faster by downloading packages not only in parallel but also with multiple connections per package.

CITATION.cff

@@ -1,43 +0,0 @@
-# This CITATION.cff file was generated with cffinit.
-# Visit https://bit.ly/cffinit to generate yours today!
-
-cff-version: 1.2.0
-title: T-Pot 24.04.0
-message: >-
-  If you use this software, please cite it using the
-  metadata from this file.
-type: software
-authors:
-  - name: Deutsche Telekom Security GmbH
-    address: Bonner Talweg 100
-    city: Bonn
-    country: DE
-    post-code: '53113'
-    website: 'https://github.com/telekom-security'
-  - given-names: Marco
-    family-names: Ochse
-    affiliation: Deutsche Telekom Security GmbH
-identifiers:
-  - type: url
-    value: >-
-      https://github.com/telekom-security/tpotce/releases/tag/24.04.0
-    description: T-Pot Release 24.04.0
-repository-code: 'https://github.com/telekom-security/tpotce'
-abstract: >-
-  T-Pot is the all in one, optionally distributed, multiarch
-  (amd64, arm64) honeypot plattform, supporting 20+
-  honeypots and countless visualization options using the
-  Elastic Stack, animated live attack maps and lots of
-  security tools to further improve the deception
-  experience.
-keywords:
-  - honeypot
-  - deception
-  - t-pot
-  - telekom security
-  - docker
-  - elk
-license: GPL-3.0
-commit: unreleased, under heavy development
-version: 24.04.0
-date-released: '2024-04-22'

SECURITY.md

@@ -1,23 +0,0 @@
-# Security Policy
-
-## Supported Versions
-
-| Version | Supported          |
-|---------|--------------------|
-| 24.04.x | :white_check_mark: |
-
-
-## Reporting a Vulnerability
-
-We prioritize the security of T-Pot highly. Often, vulnerabilities in T-Pot components stem from upstream dependencies, including honeypots, Docker images, tools, or packages. We are committed to working together to resolve any issues effectively.
-
-Please follow these steps before reporting a potential vulnerability:
-
-1. Verify that the behavior you've observed isn't already documented as a normal aspect or unrelated issue of T-Pot. For example, Cowrie may initiate outgoing connections, or T-Pot might open all possible TCP ports—a feature enabled by Honeytrap.
-2. Clearly identify which component is vulnerable (e.g., a specific honeypot, Docker image, tool, package) and isolate the issue.
-3. Provide a detailed description of the issue, including log and, if available, debug files. Include all steps necessary to reproduce the vulnerability. If you have a proposed solution, hotfix, or patch, please be prepared to submit a pull request (PR).
-4. Check whether the vulnerability is already known upstream. If there is an existing fix or patch, include that information in your report.
-
-This approach ensures a thorough and efficient resolution process.
-
-We aim to respond as quickly as possible. If you believe the issue poses an immediate threat to the entire T-Pot community, you can expedite the process by responsibly alerting our [CERT](https://www.telekom.com/en/corporate-responsibility/data-protection-data-security/security/details/introducing-deutsche-telekom-cert-358316).

bin/backup_es_folders.sh

@@ -0,0 +1,46 @@
+#!/bin/bash
+# Run as root only.
+myWHOAMI=$(whoami)
+if [ "$myWHOAMI" != "root" ]
+  then
+    echo "Need to run as root ..."
+    exit
+fi
+
+# Backup all ES relevant folders
+# Make sure ES is available
+myES="http://127.0.0.1:64298/"
+myESSTATUS=$(curl -s -XGET ''$myES'_cluster/health' | jq '.' | grep -c green)
+if ! [ "$myESSTATUS" = "1" ]
+  then
+    echo "### Elasticsearch is not available, try starting via 'systemctl start tpot'."
+    exit
+  else
+    echo "### Elasticsearch is available, now continuing."
+    echo
+fi
+
+# Set vars
+myCOUNT=1
+myDATE=$(date +%Y%m%d%H%M)
+myELKPATH="/data/elk/data"
+myKIBANAINDEXNAME=$(curl -s -XGET ''$myES'_cat/indices/.kibana' | awk '{ print $4 }')
+myKIBANAINDEXPATH=$myELKPATH/nodes/0/indices/$myKIBANAINDEXNAME
+
+# Let's ensure normal operation on exit or if interrupted ...
+function fuCLEANUP {
+  ### Start ELK
+  systemctl start tpot
+  echo "### Now starting T-Pot ..."
+}
+trap fuCLEANUP EXIT
+
+# Stop T-Pot to lift db lock
+echo "### Now stopping T-Pot"
+systemctl stop tpot
+sleep 2
+
+# Backup DB in 2 flavors
+echo "### Now backing up Elasticsearch folders ..."
+tar cvfz "elkall_"$myDATE".tgz" $myELKPATH
+tar cvfz "elkbase_"$myDATE".tgz" $myKIBANAINDEXPATH

bin/change_ews_config.sh

@@ -60,7 +60,7 @@ fi
 echo ""
 echo "[+] Creating config file with API UserID '$apiUser' and API Token '$apiToken'."
 echo "[+] Fetching config file from github. Outgoing https requests must be enabled!"
-wget -q https://raw.githubusercontent.com/telekom-security/tpotce/master/docker/ews/dist/ews.cfg -O ews.cfg.dist 
+wget -q https://raw.githubusercontent.com/dtag-dev-sec/tpotce/master/docker/ews/dist/ews.cfg -O ews.cfg.dist 
 if [[ -f "ews.cfg.dist" ]]; then
 	echo "[+] Successfully downloaded ews.cfg from github."
 else 

bin/clean.sh

@@ -20,7 +20,7 @@ echo $(ls $myFOLDER | wc -l)
 
 # Let's create a function to rotate and compress logs
 fuLOGROTATE () {
-  local mySTATUS="/data/tpot/etc/logrotate/status"
+  local mySTATUS="/opt/tpot/etc/logrotate/status"
   local myCONF="/opt/tpot/etc/logrotate/logrotate.conf"
   local myADBHONEYTGZ="/data/adbhoney/downloads.tgz"
   local myADBHONEYDL="/data/adbhoney/downloads/"
@@ -42,8 +42,8 @@ fuLOGROTATE () {
 # Ensure correct permissions and ownerships for logrotate to run without issues
 chmod 770 /data/ -R
 chown tpot:tpot /data -R
-chmod 774 /data/nginx/conf -R
+chmod 644 /data/nginx/conf -R
-chmod 774 /data/nginx/cert -R
+chmod 644 /data/nginx/cert -R
 
 # Run logrotate with force (-f) first, so the status file can be written and race conditions (with tar) be avoided
 logrotate -f -s $mySTATUS $myCONF
@@ -74,23 +74,10 @@ chown tpot:tpot $myADBHONEYDL $myCOWRIETTYLOGS $myCOWRIEDL $myDIONAEABI $myDIONA
 logrotate -s $mySTATUS $myCONF
 }
 
-# Let's create a function to clean up and prepare tpotinit data
-fuTPOTINIT () {
-  mkdir -vp /data/ews/conf \
-            /data/tpot/etc/{compose,logrotate} \
-            /tmp/etc/
-  chmod 770 /data/ews/ -R
-  chmod 770 /data/tpot/ -R
-  chmod 770 /tmp/etc/ -R
-  chown tpot:tpot /data/ews/ -R
-  chown tpot:tpot /data/tpot/ -R
-  chown tpot:tpot /tmp/etc/ -R
-}
-
 # Let's create a function to clean up and prepare honeytrap data
 fuADBHONEY () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/adbhoney/*; fi
-  mkdir -vp /data/adbhoney/{downloads,log}
+  mkdir -p /data/adbhoney/log/ /data/adbhoney/downloads/
   chmod 770 /data/adbhoney/ -R
   chown tpot:tpot /data/adbhoney/ -R
 }
@@ -98,7 +85,7 @@ fuADBHONEY () {
 # Let's create a function to clean up and prepare ciscoasa data
 fuCISCOASA () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/ciscoasa/*; fi
-  mkdir -vp /data/ciscoasa/log
+  mkdir -p /data/ciscoasa/log
   chmod 770 /data/ciscoasa -R
   chown tpot:tpot /data/ciscoasa -R
 }
@@ -106,7 +93,7 @@ fuCISCOASA () {
 # Let's create a function to clean up and prepare citrixhoneypot data
 fuCITRIXHONEYPOT () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/citrixhoneypot/*; fi
-  mkdir -vp /data/citrixhoneypot/log/
+  mkdir -p /data/citrixhoneypot/logs/
   chmod 770 /data/citrixhoneypot/ -R
   chown tpot:tpot /data/citrixhoneypot/ -R
 }
@@ -114,7 +101,7 @@ fuCITRIXHONEYPOT () {
 # Let's create a function to clean up and prepare conpot data
 fuCONPOT () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/conpot/*; fi
-  mkdir -vp /data/conpot/log
+  mkdir -p /data/conpot/log
   chmod 770 /data/conpot -R
   chown tpot:tpot /data/conpot -R
 }
@@ -122,36 +109,15 @@ fuCONPOT () {
 # Let's create a function to clean up and prepare cowrie data
 fuCOWRIE () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/cowrie/*; fi
-  mkdir -vp /data/cowrie/{downloads,keys,misc,log,log/tty}
+  mkdir -p /data/cowrie/log/tty/ /data/cowrie/downloads/ /data/cowrie/keys/ /data/cowrie/misc/
   chmod 770 /data/cowrie -R
   chown tpot:tpot /data/cowrie -R
 }
 
-# Let's create a function to clean up and prepare ddospot data
-fuDDOSPOT () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/ddospot/log; fi
-  mkdir -vp /data/ddospot/{bl,db,log}
-  chmod 770 /data/ddospot -R
-  chown tpot:tpot /data/ddospot -R
-}
-
-# Let's create a function to clean up and prepare dicompot data
-fuDICOMPOT () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/dicompot/log; fi
-  mkdir -vp /data/dicompot/{images,log}
-  chmod 770 /data/dicompot -R
-  chown tpot:tpot /data/dicompot -R
-}
-
 # Let's create a function to clean up and prepare dionaea data
 fuDIONAEA () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/dionaea/*; fi
-  mkdir -vp /data/dionaea/{log,bistreams,binaries,rtp,roots,roots/ftp,roots/tftp,roots/www,roots/upnp}
+  mkdir -p /data/dionaea/log /data/dionaea/bistreams /data/dionaea/binaries /data/dionaea/rtp /data/dionaea/roots/ftp /data/dionaea/roots/tftp /data/dionaea/roots/www /data/dionaea/roots/upnp
-  touch /data/dionaea/dionaea-errors.log
-  touch /data/dionaea/sipaccounts.sqlite
-  touch /data/dionaea/sipaccounts.sqlite-journal
-  touch /data/dionaea/log/dionaea.json
-  touch /data/dionaea/log/dionaea.sqlite
   chmod 770 /data/dionaea -R
   chown tpot:tpot /data/dionaea -R
 }
@@ -159,7 +125,7 @@ fuDIONAEA () {
 # Let's create a function to clean up and prepare elasticpot data
 fuELASTICPOT () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/elasticpot/*; fi
-  mkdir -vp /data/elasticpot/log
+  mkdir -p /data/elasticpot/log
   chmod 770 /data/elasticpot -R
   chown tpot:tpot /data/elasticpot -R
 }
@@ -169,23 +135,15 @@ fuELK () {
   # ELK data will be kept for <= 90 days, check /etc/crontab for curator modification
   # ELK daemon log files will be removed
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/elk/log/*; fi
-  mkdir -vp /data/elk/{data,log}
+  mkdir -p /data/elk
   chmod 770 /data/elk -R
   chown tpot:tpot /data/elk -R
 }
 
-# Let's create a function to clean up and prepare endlessh data
-fuENDLESSH () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/endlessh/log; fi
-  mkdir -vp /data/endlessh/log
-  chmod 770 /data/endlessh -R
-  chown tpot:tpot /data/endlessh -R
-}
-
 # Let's create a function to clean up and prepare fatt data
 fuFATT () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/fatt/*; fi
-  mkdir -vp /data/fatt/log
+  mkdir -p /data/fatt/log
   chmod 770 -R /data/fatt
   chown tpot:tpot -R /data/fatt
 }
@@ -193,71 +151,39 @@ fuFATT () {
 # Let's create a function to clean up and prepare glastopf data
 fuGLUTTON () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/glutton/*; fi
-  mkdir -vp /data/glutton/{log,payloads}
+  mkdir -p /data/glutton/log
   chmod 770 /data/glutton -R
   chown tpot:tpot /data/glutton -R
 }
 
-# Let's create a function to clean up and prepare hellpot data
-fuHELLPOT () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/hellpot/log; fi
-  mkdir -vp /data/hellpot/log
-  chmod 770 /data/hellpot -R
-  chown tpot:tpot /data/hellpot -R
-}
-
 # Let's create a function to clean up and prepare heralding data
 fuHERALDING () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/heralding/*; fi
-  mkdir -vp /data/heralding/log
+  mkdir -p /data/heralding/log
   chmod 770 /data/heralding -R
   chown tpot:tpot /data/heralding -R
 }
 
-# Let's create a function to clean up and prepare honeypots data
+# Let's create a function to clean up and prepare honeypy data
-fuHONEYPOTS () {
+fuHONEYPY () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/honeypots/*; fi
+  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/honeypy/*; fi
-  mkdir -vp /data/honeypots/log
+  mkdir -p /data/honeypy/log
-  chmod 770 /data/honeypots -R
+  chmod 770 /data/honeypy -R
-  chown tpot:tpot /data/honeypots -R
+  chown tpot:tpot /data/honeypy -R
-}
-
-# Let's create a function to clean up and prepare honeysap data
-fuHONEYSAP () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/honeysap/*; fi
-  mkdir -vp /data/honeysap/log
-  chmod 770 /data/honeysap -R
-  chown tpot:tpot /data/honeysap -R
 }
 
 # Let's create a function to clean up and prepare honeytrap data
 fuHONEYTRAP () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/honeytrap/*; fi
-  mkdir -vp /data/honeytrap/{log,attacks,downloads}
+  mkdir -p /data/honeytrap/log/ /data/honeytrap/attacks/ /data/honeytrap/downloads/
   chmod 770 /data/honeytrap/ -R
   chown tpot:tpot /data/honeytrap/ -R
 }
 
-# Let's create a function to clean up and prepare ipphoney data
-fuIPPHONEY () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/ipphoney/*; fi
-  mkdir -vp /data/ipphoney/log
-  chmod 770 /data/ipphoney -R
-  chown tpot:tpot /data/ipphoney -R
-}
-
-# Let's create a function to clean up and prepare log4pot data
-fuLOG4POT () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/log4pot/*; fi
-  mkdir -vp /data/log4pot/{log,payloads}
-  chmod 770 /data/log4pot -R
-  chown tpot:tpot /data/log4pot -R
-}
-
 # Let's create a function to clean up and prepare mailoney data
 fuMAILONEY () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/mailoney/*; fi
-  mkdir -vp /data/mailoney/log/
+  mkdir -p /data/mailoney/log/
   chmod 770 /data/mailoney/ -R
   chown tpot:tpot /data/mailoney/ -R
 }
@@ -265,7 +191,7 @@ fuMAILONEY () {
 # Let's create a function to clean up and prepare mailoney data
 fuMEDPOT () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/medpot/*; fi
-  mkdir -vp /data/medpot/log/
+  mkdir -p /data/medpot/log/
   chmod 770 /data/medpot/ -R
   chown tpot:tpot /data/medpot/ -R
 }
@@ -273,32 +199,22 @@ fuMEDPOT () {
 # Let's create a function to clean up nginx logs
 fuNGINX () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/nginx/log/*; fi
-  mkdir -vp /data/nginx/{cert,conf,log}
   touch /data/nginx/log/error.log
-  chmod 774 /data/nginx/conf -R
+  chmod 644 /data/nginx/conf -R
-  chmod 774 /data/nginx/cert -R
+  chmod 644 /data/nginx/cert -R
-  chown tpot:tpot /data/nginx -R
 }
 
-# Let's create a function to clean up and prepare redishoneypot data
+# Let's create a function to clean up and prepare rdpy data
-fuREDISHONEYPOT () {
+fuRDPY () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/redishoneypot/log; fi
+  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/rdpy/*; fi
-  mkdir -vp /data/redishoneypot/log
+  mkdir -p /data/rdpy/log/
-  chmod 770 /data/redishoneypot -R
+  chmod 770 /data/rdpy/ -R
-  chown tpot:tpot /data/redishoneypot -R
+  chown tpot:tpot /data/rdpy/ -R
-}
-
-# Let's create a function to clean up and prepare sentrypeer data
-fuSENTRYPEER () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/sentrypeer/log; fi
-  mkdir -vp /data/sentrypeer/log
-  chmod 770 /data/sentrypeer -R
-  chown tpot:tpot /data/sentrypeer -R
 }
 
 # Let's create a function to prepare spiderfoot db
 fuSPIDERFOOT () {
-  mkdir -vp /data/spiderfoot
+  mkdir -p /data/spiderfoot
   touch /data/spiderfoot/spiderfoot.db
   chmod 770 -R /data/spiderfoot
   chown tpot:tpot -R /data/spiderfoot
@@ -307,7 +223,7 @@ fuSPIDERFOOT () {
 # Let's create a function to clean up and prepare suricata data
 fuSURICATA () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/suricata/*; fi
-  mkdir -vp /data/suricata/log
+  mkdir -p /data/suricata/log
   chmod 770 -R /data/suricata
   chown tpot:tpot -R /data/suricata
 }
@@ -315,7 +231,7 @@ fuSURICATA () {
 # Let's create a function to clean up and prepare p0f data
 fuP0F () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/p0f/*; fi
-  mkdir -vp /data/p0f/log
+  mkdir -p /data/p0f/log
   chmod 770 -R /data/p0f
   chown tpot:tpot -R /data/p0f
 }
@@ -323,19 +239,11 @@ fuP0F () {
 # Let's create a function to clean up and prepare p0f data
 fuTANNER () {
   if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/tanner/*; fi
-  mkdir -vp /data/tanner/{log,files}
+  mkdir -p /data/tanner/log /data/tanner/files
   chmod 770 -R /data/tanner
   chown tpot:tpot -R /data/tanner
 }
 
-# Let's create a function to clean up and prepare wordpot data
-fuWORDPOT () {
-  if [ "$myPERSISTENCE" != "on" ]; then rm -rf /data/wordpot/log; fi
-  mkdir -vp /data/wordpot/log
-  chmod 770 /data/wordpot -R
-  chown tpot:tpot /data/wordpot -R
-}
-
 # Avoid unwanted cleaning
 if [ "$myPERSISTENCE" = "" ];
   then
@@ -356,38 +264,27 @@ if [ "$myPERSISTENCE" = "on" ];
   then
     echo "Persistence enabled, now rotating and compressing logs."
     fuLOGROTATE
-fi
+  else
-
+    echo "Cleaning up and preparing data folders."
-echo  
+    fuADBHONEY
-echo "Checking and preparing data folders."
+    fuCISCOASA
-fuTPOTINIT
+    fuCITRIXHONEYPOT
-fuADBHONEY
+    fuCONPOT
-fuCISCOASA
+    fuCOWRIE
-fuCITRIXHONEYPOT
+    fuDIONAEA
-fuCONPOT
+    fuELASTICPOT
-fuCOWRIE
+    fuELK
-fuDDOSPOT
+    fuFATT
-fuDICOMPOT
+    fuGLUTTON
-fuDIONAEA
+    fuHERALDING
-fuELASTICPOT
+    fuHONEYPY
-fuELK
+    fuHONEYTRAP
-fuENDLESSH
+    fuMAILONEY
-fuFATT
+    fuMEDPOT
-fuGLUTTON
+    fuNGINX
-fuHERALDING
+    fuRDPY
-fuHELLPOT
+    fuSPIDERFOOT
-fuHONEYSAP
+    fuSURICATA
-fuHONEYPOTS
+    fuP0F
-fuHONEYTRAP
+    fuTANNER
-fuIPPHONEY
+  fi
-fuLOG4POT
-fuMAILONEY
-fuMEDPOT
-fuNGINX
-fuREDISHONEYPOT
-fuSENTRYPEER
-fuSPIDERFOOT
-fuSURICATA
-fuP0F
-fuTANNER
-fuWORDPOT

bin/dps.sh

@@ -0,0 +1,54 @@
+#!/bin/bash
+
+# Run as root only.
+myWHOAMI=$(whoami)
+if [ "$myWHOAMI" != "root" ]
+  then
+    echo "Need to run as root ..."
+    exit
+fi
+
+# Show current status of T-Pot containers
+myPARAM="$1"
+myCONTAINERS="$(cat /opt/tpot/etc/tpot.yml | grep -v '#' | grep container_name | cut -d: -f2 | sort | tr -d " ")"
+myRED=""
+myGREEN=""
+myBLUE=""
+myWHITE=""
+myMAGENTA=""
+
+function fuGETSTATUS {
+grc --colour=on docker ps -f status=running -f status=exited --format "table {{.Names}}\t{{.Status}}\t{{.Ports}}" | grep -v "NAME" | sort
+}
+
+function fuGETSYS {
+printf "========| System |========\n"
+printf "%+10s %-20s\n" "Date: " "$(date)"
+printf "%+10s %-20s\n" "Uptime: " "$(uptime | cut -b 2-)"
+echo
+}
+
+while true
+  do
+    myDPS=$(fuGETSTATUS)
+    myDPSNAMES=$(echo "$myDPS" | awk '{ print $1 }' | sort)
+    fuGETSYS
+    printf "%-21s %-28s %s\n" "NAME" "STATUS" "PORTS"
+    if [ "$myDPS" != "" ];
+      then
+        echo "$myDPS"
+    fi
+    for i in $myCONTAINERS; do
+      myAVAIL=$(echo "$myDPSNAMES" | grep -o "$i" | uniq | wc -l)      	    
+      if [ "$myAVAIL" = "0" ];
+	then
+	  printf "%-28s %-28s\n" "$myRED$i" "DOWN$myWHITE"
+      fi
+    done
+    if [[ $myPARAM =~ ^([1-9]|[1-9][0-9]|[1-9][0-9][0-9])$ ]];
+      then 
+        sleep "$myPARAM"
+      else 
+        break
+    fi
+done

bin/export_kibana-objects.sh

@@ -6,7 +6,7 @@ myKIBANA="http://127.0.0.1:64296/"
 myESSTATUS=$(curl -s -XGET ''$myES'_cluster/health' | jq '.' | grep -c green)
 if ! [ "$myESSTATUS" = "1" ]
   then
-    echo "### Elasticsearch is not available, try starting via 'systemctl start tpot'."
+    echo "### Elasticsearch is not available, try starting via 'systemctl start elk'."
     exit
   else
     echo "### Elasticsearch is available, now continuing."
@@ -15,25 +15,24 @@ fi
 
 # Set vars
 myDATE=$(date +%Y%m%d%H%M)
-myINDEXCOUNT=$(curl -s -XGET ''$myKIBANA'api/saved_objects/_find?type=index-pattern' | jq '.saved_objects[].attributes' | tr '\\' '\n' | grep -E "scripted|url" | wc -w)
+myINDEXCOUNT=$(curl -s -XGET ''$myKIBANA'api/saved_objects/_find?type=index-pattern' | jq '.saved_objects[].attributes' | tr '\\' '\n' | grep "scripted" | wc -w)
 myINDEXID=$(curl -s -XGET ''$myKIBANA'api/saved_objects/_find?type=index-pattern' | jq '.saved_objects[].id' | tr -d '"')
-myDASHBOARDS=$(curl -s -XGET ''$myKIBANA'api/saved_objects/_find?type=dashboard&per_page=500' | jq '.saved_objects[].id' | tr -d '"')
+myDASHBOARDS=$(curl -s -XGET ''$myKIBANA'api/saved_objects/_find?type=dashboard&per_page=300' | jq '.saved_objects[].id' | tr -d '"')
-myVISUALIZATIONS=$(curl -s -XGET ''$myKIBANA'api/saved_objects/_find?type=visualization&per_page=500' | jq '.saved_objects[].id' | tr -d '"')
+myVISUALIZATIONS=$(curl -s -XGET ''$myKIBANA'api/saved_objects/_find?type=visualization&per_page=300' | jq '.saved_objects[].id' | tr -d '"')
-mySEARCHES=$(curl -s -XGET ''$myKIBANA'api/saved_objects/_find?type=search&per_page=500' | jq '.saved_objects[].id' | tr -d '"')
+mySEARCHES=$(curl -s -XGET ''$myKIBANA'api/saved_objects/_find?type=search&per_page=300' | jq '.saved_objects[].id' | tr -d '"')
-myCONFIGS=$(curl -s -XGET ''$myKIBANA'api/saved_objects/_find?type=config&per_page=500' | jq '.saved_objects[].id' | tr -d '"')
 myCOL1=""
 myCOL0=""
 
 # Let's ensure normal operation on exit or if interrupted ...
 function fuCLEANUP {
-  rm -rf patterns/ dashboards/ visualizations/ searches/ configs/
+  rm -rf patterns/ dashboards/ visualizations/ searches/
 }
 trap fuCLEANUP EXIT
 
 # Export index patterns
 mkdir -p patterns
 echo $myCOL1"### Now exporting"$myCOL0 $myINDEXCOUNT $myCOL1"index pattern fields." $myCOL0
-curl -s -XGET ''$myKIBANA'api/saved_objects/index-pattern/'$myINDEXID'' | jq '. | {attributes, references}' > patterns/$myINDEXID.json &
+curl -s -XGET ''$myKIBANA'api/saved_objects/index-pattern/'$myINDEXID'' | jq '. | {attributes}' > patterns/$myINDEXID.json &
 echo
 
 # Export dashboards
@@ -42,7 +41,7 @@ echo $myCOL1"### Now exporting"$myCOL0 $(echo $myDASHBOARDS | wc -w) $myCOL1"das
 for i in $myDASHBOARDS;
   do
     echo $myCOL1"###### "$i $myCOL0
-    curl -s -XGET ''$myKIBANA'api/saved_objects/dashboard/'$i'' | jq '. | {attributes, references}' > dashboards/$i.json &
+    curl -s -XGET ''$myKIBANA'api/saved_objects/dashboard/'$i'' | jq '. | {attributes}' > dashboards/$i.json &
   done;
 echo
 
@@ -52,7 +51,7 @@ echo $myCOL1"### Now exporting"$myCOL0 $(echo $myVISUALIZATIONS | wc -w) $myCOL1
 for i in $myVISUALIZATIONS;
   do
     echo $myCOL1"###### "$i $myCOL0
-    curl -s -XGET ''$myKIBANA'api/saved_objects/visualization/'$i'' | jq '. | {attributes, references}' > visualizations/$i.json &
+    curl -s -XGET ''$myKIBANA'api/saved_objects/visualization/'$i'' | jq '. | {attributes}' > visualizations/$i.json &
   done;
 echo
 
@@ -62,17 +61,7 @@ echo $myCOL1"### Now exporting"$myCOL0 $(echo $mySEARCHES | wc -w) $myCOL1"searc
 for i in $mySEARCHES;
   do
     echo $myCOL1"###### "$i $myCOL0
-    curl -s -XGET ''$myKIBANA'api/saved_objects/search/'$i'' | jq '. | {attributes, references}' > searches/$i.json &
+    curl -s -XGET ''$myKIBANA'api/saved_objects/search/'$i'' | jq '. | {attributes}' > searches/$i.json &
-  done;
-echo
-
-# Export configs
-mkdir -p configs
-echo $myCOL1"### Now exporting"$myCOL0 $(echo $myCONFIGS | wc -w) $myCOL1"configs." $myCOL0
-for i in $myCONFIGS;
-  do
-    echo $myCOL1"###### "$i $myCOL0
-    curl -s -XGET ''$myKIBANA'api/saved_objects/config/'$i'' | jq '. | {attributes, references}' > configs/$i.json &
   done;
 echo
 
@@ -81,7 +70,7 @@ wait
 
 # Building tar archive
 echo $myCOL1"### Now building archive"$myCOL0 "kibana-objects_"$myDATE".tgz"
-tar cvfz kibana-objects_$myDATE.tgz patterns dashboards visualizations searches configs > /dev/null
+tar cvfz kibana-objects_$myDATE.tgz patterns dashboards visualizations searches > /dev/null
 
 # Stats
 echo
@@ -90,5 +79,4 @@ echo $myCOL1"###### Exported"$myCOL0 $myINDEXCOUNT $myCOL1"index patterns." $myC
 echo $myCOL1"###### Exported"$myCOL0 $(echo $myDASHBOARDS | wc -w) $myCOL1"dashboards." $myCOL0
 echo $myCOL1"###### Exported"$myCOL0 $(echo $myVISUALIZATIONS | wc -w) $myCOL1"visualizations." $myCOL0
 echo $myCOL1"###### Exported"$myCOL0 $(echo $mySEARCHES | wc -w) $myCOL1"searches." $myCOL0
-echo $myCOL1"###### Exported"$myCOL0 $(echo $myCONFIGS | wc -w) $myCOL1"configs." $myCOL0
 echo

bin/hpfeeds_optin.sh

@@ -10,6 +10,20 @@ fi
 
 myTPOTYMLFILE="/opt/tpot/etc/tpot.yml"
 
+function fuSISSDEN () {
+echo
+echo "You chose SISSDEN, you just need to provide ident and secret"
+echo
+myENABLE="true"
+myHOST="hpfeeds.sissden.eu"
+myPORT="10000"
+myCHANNEL="t-pot.events"
+myCERT="/opt/ewsposter/sissden.pem"
+read -p "Ident: " myIDENT
+read -p "Secret: " mySECRET
+myFORMAT="json"
+}
+
 function fuGENERIC () {
 echo
 echo "You chose generic, please provide all the details of the broker"
@@ -105,7 +119,8 @@ echo
 echo
 echo "Please choose your broker"
 echo "---------------------------"
-echo "[1] - Generic (enter details manually)"
+echo "[1] - SISSDEN"
+echo "[2] - Generic (enter details manually)"
 echo "[0] - Opt out of HPFEEDS"
 echo "[q] - Do not agree end exit"
 echo
@@ -115,6 +130,10 @@ while [ 1 != 2 ]
       echo $mySELECT
       case "$mySELECT" in
         [1])
+	  fuSISSDEN
+          break
+          ;;
+        [2])
 	  fuGENERIC
           break
           ;;

bin/hptest.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 myHOST="$1"
-myPACKAGES="dcmtk netcat nmap"
+myPACKAGES="netcat nmap"
 myMEDPOTPACKET="
 MSH|^~\&|ADT1|MCM|LABADT|MCM|198808181126|SECURITY|ADT^A01|MSG00001-|P|2.6
 EVN|A01|198808181123
@@ -83,11 +83,7 @@ fuCHECKFORARGS
 echo "Starting scans ..."
 echo "$myMEDPOTPACKET" | nc "$myHOST" 2575 &
 curl -XGET "http://$myHOST:9200/logstash-*/_search" &
-curl -XPOST -H "Content-Type: application/json" -d '{"name":"test","email":"test@test.com"}' "http://$myHOST:9200/test" &
 echo "
I20100" | timeout --foreground 3 nc "$myHOST" 10001 &
-findscu -P -k PatientName="*" $myHOST 11112 &
-getscu -P -k PatientName="*" $myHOST 11112 &
-telnet $myHOST 3299 &
 fuSCAN "180" "7,8,102,135,161,1025,1080,5000,9200" "$myHOST" "-sC -sS -sU -sV"
 fuSCAN "180" "2048,4096,5432" "$myHOST" "-sC -sS -sU -sV --version-light"
 fuSCAN "120" "20,21" "$myHOST" "--script=ftp* -sC -sS -sV"

bin/import_kibana-objects.sh

@@ -6,7 +6,7 @@ myKIBANA="http://127.0.0.1:64296/"
 myESSTATUS=$(curl -s -XGET ''$myES'_cluster/health' | jq '.' | grep -c green)
 if ! [ "$myESSTATUS" = "1" ]
   then
-    echo "### Elasticsearch is not available, try starting via 'systemctl start tpot'."
+    echo "### Elasticsearch is not available, try starting via 'systemctl start elk'."
     exit
   else
     echo "### Elasticsearch is available, now continuing."
@@ -20,7 +20,7 @@ myCOL0=""
 
 # Let's ensure normal operation on exit or if interrupted ...
 function fuCLEANUP {
-  rm -rf patterns/ dashboards/ visualizations/ searches/ configs/
+  rm -rf patterns/ dashboards/ visualizations/ searches/
 }
 trap fuCLEANUP EXIT
 
@@ -43,7 +43,7 @@ tar xvfz $myDUMP > /dev/null
 
 # Restore index patterns
 myINDEXID=$(ls patterns/*.json | cut -c 10- | rev | cut -c 6- | rev)
-myINDEXCOUNT=$(cat patterns/$myINDEXID.json | tr '\\' '\n' | grep -E "scripted|url" | wc -w)
+myINDEXCOUNT=$(cat patterns/$myINDEXID.json | tr '\\' '\n' | grep "scripted" | wc -w)
 echo $myCOL1"### Now importing"$myCOL0 $myINDEXCOUNT $myCOL1"index pattern fields." $myCOL0
 curl -s -XDELETE ''$myKIBANA'api/saved_objects/index-pattern/logstash-*' -H "Content-Type: application/json" -H "kbn-xsrf: true" > /dev/null
 curl -s -XDELETE ''$myKIBANA'api/saved_objects/index-pattern/'$myINDEXID'' -H "Content-Type: application/json" -H "kbn-xsrf: true" > /dev/null
@@ -98,22 +98,6 @@ for i in $mySEARCHES;
 echo
 wait
 
-# Restore configs
-myCONFIGS=$(ls configs/*.json | cut -c 9- | rev | cut -c 6- | rev)
-echo $myCOL1"### Now importing "$myCOL0$(echo $myCONFIGS | wc -w)$myCOL1 "configs." $myCOL0
-for i in $myCONFIGS;
-  do
-    curl -s -XDELETE ''$myKIBANA'api/saved_objects/configs/'$i'' -H "Content-Type: application/json" -H "kbn-xsrf: true" > /dev/null &
-  done;
-wait
-for i in $myCONFIGS;
-  do
-    echo $myCOL1"###### "$i $myCOL0
-    curl -s -XPOST ''$myKIBANA'api/saved_objects/configs/'$i'' -H "Content-Type: application/json" -H "kbn-xsrf: true" -d @configs/$i.json > /dev/null &
-  done;
-echo
-wait
-
 # Stats
 echo
 echo $myCOL1"### Statistics"
@@ -121,6 +105,5 @@ echo $myCOL1"###### Imported"$myCOL0 $myINDEXCOUNT $myCOL1"index patterns." $myC
 echo $myCOL1"###### Imported"$myCOL0 $(echo $myDASHBOARDS | wc -w) $myCOL1"dashboards." $myCOL0
 echo $myCOL1"###### Imported"$myCOL0 $(echo $myVISUALIZATIONS | wc -w) $myCOL1"visualizations." $myCOL0
 echo $myCOL1"###### Imported"$myCOL0 $(echo $mySEARCHES | wc -w) $myCOL1"searches." $myCOL0
-echo $myCOL1"###### Imported"$myCOL0 $(echo $myCONFIGS | wc -w) $myCOL1"configs." $myCOL0
 echo
 

bin/rules.sh

@@ -33,7 +33,7 @@ fi
 function fuGETPORTS {
 ### Get ports from docker-compose.yml
 
-myDOCKERCOMPOSEPORTS=$(cat $myDOCKERCOMPOSEYML | yq -r '.services[].ports' | grep ':' | sed -e s/127.0.0.1// | tr -d '", ,#,-' | sed -e s/^:// | cut -f1 -d ':' )
+myDOCKERCOMPOSEPORTS=$(cat $myDOCKERCOMPOSEYML | yq -r '.services[].ports' | grep ':' | sed -e s/127.0.0.1// | tr -d '", ' | sed -e s/^:// | cut -f1 -d ':' )
 myDOCKERCOMPOSEPORTS+=" $myHOSTPORTS"
 myRULESPORTS=$(for i in $myDOCKERCOMPOSEPORTS; do echo $i; done | sort -gu)
 echo "Setting up / removing these ports:"
@@ -44,24 +44,24 @@ function fuSETRULES {
 ### Setting up iptables-legacy rules for honeytrap
 if [ "$myNFQCHECK" == "honeytrap" ];
   then
-    iptables -w -A INPUT -s 127.0.0.1 -j ACCEPT
+    /usr/sbin/iptables-legacy -w -A INPUT -s 127.0.0.1 -j ACCEPT
-    iptables -w -A INPUT -d 127.0.0.1 -j ACCEPT
+    /usr/sbin/iptables-legacy -w -A INPUT -d 127.0.0.1 -j ACCEPT
 
     for myPORT in $myRULESPORTS; do
-      iptables -w -A INPUT -p tcp --dport $myPORT -j ACCEPT
+      /usr/sbin/iptables-legacy -w -A INPUT -p tcp --dport $myPORT -j ACCEPT
     done
 
-    iptables -w -A INPUT -p tcp --syn -m state --state NEW -j NFQUEUE
+    /usr/sbin/iptables-legacy -w -A INPUT -p tcp --syn -m state --state NEW -j NFQUEUE
 fi
 
 ### Setting up iptables-legacy rules for glutton
 if [ "$myNFQCHECK" == "glutton" ];
   then
-    iptables -w -t mangle -A PREROUTING -s 127.0.0.1 -j ACCEPT
+    /usr/sbin/iptables-legacy -w -t raw -A PREROUTING -s 127.0.0.1 -j ACCEPT
-    iptables -w -t mangle -A PREROUTING -d 127.0.0.1 -j ACCEPT
+    /usr/sbin/iptables-legacy -w -t raw -A PREROUTING -d 127.0.0.1 -j ACCEPT
 
     for myPORT in $myRULESPORTS; do
-      iptables -w -t mangle -A PREROUTING -p tcp --dport $myPORT -j ACCEPT
+      /usr/sbin/iptables-legacy -w -t raw -A PREROUTING -p tcp --dport $myPORT -j ACCEPT
     done
     # No need for NFQ forwarding, such rules are set up by glutton
 fi
@@ -71,24 +71,24 @@ function fuUNSETRULES {
 ### Removing  iptables-legacy rules for honeytrap
 if [ "$myNFQCHECK" == "honeytrap" ];
   then
-    iptables -w -D INPUT -s 127.0.0.1 -j ACCEPT
+    /usr/sbin/iptables-legacy -w -D INPUT -s 127.0.0.1 -j ACCEPT
-    iptables -w -D INPUT -d 127.0.0.1 -j ACCEPT
+    /usr/sbin/iptables-legacy -w -D INPUT -d 127.0.0.1 -j ACCEPT
 
     for myPORT in $myRULESPORTS; do
-      iptables -w -D INPUT -p tcp --dport $myPORT -j ACCEPT
+      /usr/sbin/iptables-legacy -w -D INPUT -p tcp --dport $myPORT -j ACCEPT
     done
 
-    iptables -w -D INPUT -p tcp --syn -m state --state NEW -j NFQUEUE
+    /usr/sbin/iptables-legacy -w -D INPUT -p tcp --syn -m state --state NEW -j NFQUEUE
 fi
 
 ### Removing iptables-legacy rules for glutton
 if [ "$myNFQCHECK" == "glutton" ];
   then
-    iptables -w -t mangle -D PREROUTING -s 127.0.0.1 -j ACCEPT
+    /usr/sbin/iptables-legacy -w -t raw -D PREROUTING -s 127.0.0.1 -j ACCEPT
-    iptables -w -t mangle -D PREROUTING -d 127.0.0.1 -j ACCEPT
+    /usr/sbin/iptables-legacy -w -t raw -D PREROUTING -d 127.0.0.1 -j ACCEPT
 
     for myPORT in $myRULESPORTS; do
-      iptables -w -t mangle -D PREROUTING -p tcp --dport $myPORT -j ACCEPT
+      /usr/sbin/iptables-legacy -w -t raw -D PREROUTING -p tcp --dport $myPORT -j ACCEPT
     done
     # No need for removing NFQ forwarding, such rules are removed by glutton
 fi

bin/tped.sh

@@ -0,0 +1,56 @@
+#!/bin/bash
+
+# Run as root only.
+myWHOAMI=$(whoami)
+if [ "$myWHOAMI" != "root" ]
+  then
+    echo "Need to run as root ..."
+    exit
+fi
+
+# set backtitle, get filename
+myBACKTITLE="T-Pot Edition Selection Tool"
+myYMLS=$(cd /opt/tpot/etc/compose/ && ls -1 *.yml)
+myLINK="/opt/tpot/etc/tpot.yml"
+
+# Let's load docker images in parallel
+function fuPULLIMAGES {
+local myTPOTCOMPOSE="/opt/tpot/etc/tpot.yml"
+for name in $(cat $myTPOTCOMPOSE | grep -v '#' | grep image | cut -d'"' -f2 | uniq)
+  do
+    docker pull $name &
+  done
+wait
+echo
+}
+
+# setup menu
+for i in $myYMLS;
+  do
+    myITEMS+="$i $(echo $i | cut -d "." -f1 | tr [:lower:] [:upper:]) " 
+done
+myEDITION=$(dialog --backtitle "$myBACKTITLE" --menu "Select T-Pot Edition" 12 50 5 $myITEMS 3>&1 1>&2 2>&3 3>&-)
+if [ "$myEDITION" == "" ];
+  then
+    echo "Have a nice day!"
+    exit
+fi
+dialog --backtitle "$myBACKTITLE" --title "[ Activate now? ]" --yesno "\n$myEDITION" 7 50
+myOK=$?
+if [ "$myOK" == "0" ];
+  then
+    echo "OK - Activating and downloading latest images."
+    systemctl stop tpot
+    if [ "$(docker ps -aq)" != "" ];
+      then
+        docker stop $(docker ps -aq)
+        docker rm $(docker ps -aq)
+    fi
+    rm -f $myLINK
+    ln -s /opt/tpot/etc/compose/$myEDITION $myLINK
+    fuPULLIMAGES
+    systemctl start tpot
+    echo "Done. Use \"dps.sh\" for monitoring"
+  else 
+    echo "Have a nice day!"
+fi

bin/updateip.sh

@@ -0,0 +1,34 @@
+#!/bin/bash
+# Let's add the first local ip to the /etc/issue and external ip to ews.ip file
+# If the external IP cannot be detected, the internal IP will be inherited.
+source /etc/environment
+myLOCALIP=$(hostname -I | awk '{ print $1 }')
+myEXTIP=$(/opt/tpot/bin/myip.sh)
+if [ "$myEXTIP" = "" ];
+  then
+    myEXTIP=$myLOCALIP
+fi
+mySSHUSER=$(cat /etc/passwd | grep 1000 | cut -d ':' -f1)
+echo "" > /etc/issue
+toilet -f ivrit -F metal --filter border:metal "T-Pot   19.03" | sed 's/\\/\\\\/g' >> /etc/issue
+echo >> /etc/issue
+echo ",---- [ \n ] [ \d ] [ \t ]" >> /etc/issue
+echo "|" >> /etc/issue
+echo "| IP: $myLOCALIP ($myEXTIP)" >> /etc/issue
+echo "| SSH: ssh -l tsec -p 64295 $myLOCALIP" >> /etc/issue 
+echo "| WEB: https://$myLOCALIP:64297" >> /etc/issue
+echo "| ADMIN: https://$myLOCALIP:64294" >> /etc/issue
+echo "|" >> /etc/issue
+echo "\`----" >> /etc/issue
+echo >> /etc/issue
+tee /data/ews/conf/ews.ip << EOF
+[MAIN]
+ip = $myEXTIP
+EOF
+tee /opt/tpot/etc/compose/elk_environment << EOF
+MY_EXTIP=$myEXTIP
+MY_INTIP=$myLOCALIP
+MY_HOSTNAME=$HOSTNAME
+EOF
+chown tpot:tpot /data/ews/conf/ews.ip
+chmod 770 /data/ews/conf/ews.ip

cloud/ansible/.gitignore

@@ -0,0 +1,2 @@
+# Ansible
+*.retry

cloud/ansible/README.md

@@ -0,0 +1,235 @@
+# T-Pot Ansible
+
+Here you can find a ready-to-use solution for your automated T-Pot deployment using [Ansible](https://www.ansible.com/).  
+It consists of an Ansible Playbook with multiple roles, which is reusable for all [OpenStack](https://www.openstack.org/) based clouds (e.g. Open Telekom Cloud, Orange Cloud, Telefonica Open Cloud, OVH) out of the box.  
+Apart from that you can easily adapt the deploy role to use other [cloud providers](https://docs.ansible.com/ansible/latest/modules/list_of_cloud_modules.html) (e.g. AWS, Azure, Digital Ocean, Google).
+
+The Playbook first creates all resources (security group, network, subnet, router), deploys a new server and then installs and configures T-Pot.
+
+This example showcases the deployment on our own OpenStack based Public Cloud Offering [Open Telekom Cloud](https://open-telekom-cloud.com/en).
+
+# Table of contents
+- [Preparation of Ansible Master](#ansible-master)
+  - [Ansible Installation](#ansible)
+  - [Agent Forwarding](#agent-forwarding)
+- [Preparations in Open Telekom Cloud Console](#preparation)
+  - [Create new project](#project)
+  - [Create API user](#api-user)
+  - [Import Key Pair](#key-pair)
+- [Clone Git Repository](#clone-git)
+- [Settings and recommended values](#settings)
+  - [OpenStack authentication variables](#os-auth)
+  - [Ansible remote user](#remote-user)
+  - [Instance settings](#instance-settings)
+  - [User password](#user-password)
+  - [Configure `tpot.conf.dist`](#tpot-conf)
+  - [Optional: Custom `ews.cfg`](#ews-cfg)
+  - [Optional: Custom HPFEEDS](#hpfeeds)
+- [Deploying a T-Pot](#deploy)
+- [Further documentation](#documentation)
+
+<a name="ansible-master"></a>
+# Preparation of Ansible Master
+You can either run the Ansible Playbook locally on your Linux or macOS machine or you can use an ECS (Elastic Cloud Server) on Open Telekom Cloud, which I did.  
+I used Ubuntu 18.04 for my Ansible Master Server, but other OSes are fine too.  
+Ansible works over the SSH Port, so you don't have to add any special rules to your Security Group.
+
+<a name="ansible"></a>
+## Ansible Installation
+Example for Ubuntu 18.04:  
+
+At first we update the system:  
+`sudo apt update`  
+`sudo apt dist-upgrade`
+
+Then we need to add the repository and install Ansible:  
+`sudo apt-add-repository --yes --update ppa:ansible/ansible`  
+`sudo apt install ansible`
+
+For other OSes and Distros have a look at the official [Ansible Documentation](https://docs.ansible.com/ansible/latest/installation_guide/intro_installation.html).
+
+<a name="agent-forwarding"></a>
+## Agent Forwarding
+If you run the Ansible Playbook remotely on your Ansible Master Server, Agent Forwarding must be enabled in order to let Ansible connect to newly created machines.  
+- On Linux or macOS:  
+  - Create or edit `~/.ssh/config`
+    ```
+    Host ANSIBLE_MASTER_IP
+    ForwardAgent yes
+    ```
+- On Windows using Putty:  
+![Putty Agent Forwarding](doc/putty_agent_forwarding.png)
+
+<a name="preparation"></a>
+# Preparations in Open Telekom Cloud Console
+(You can skip this if you have already set up a project and an API account with key pair)  
+(Just make sure you know the naming for everything, as you need to configure the Ansible variables.)
+
+Before we can start deploying, we have to prepare the Open Telekom Cloud tenant.  
+For that, go to the [Web Console](https://auth.otc.t-systems.com/authui/login) and log in with an admin user.
+
+<a name="project"></a>
+## Create new project
+I strongly advise you to create a separate project for the T-Pots in your tenant.  
+In my case I named it `tpot`.
+
+![Create new project](doc/otc_1_project.gif)
+
+<a name="api-user"></a>
+## Create API user
+The next step is to create a new user account, which is restricted to the project.  
+This ensures that the API access is limited to that project.
+
+![Create API user](doc/otc_2_user.gif)
+
+<a name="key-pair"></a>
+## Import Key Pair
+:warning: Now log in with the newly created API user account and select your project.
+
+![Login as API user](doc/otc_3_login.gif)
+
+Import your SSH public key.
+
+![Import SSH Public Key](doc/otc_4_import_key.gif)
+
+
+<a name="clone-git"></a>
+# Clone Git Repository
+Clone the `tpotce` repository to your Ansible Master:  
+`git clone https://github.com/dtag-dev-sec/tpotce.git`  
+All Ansible related files are located in the [`cloud/ansible/openstack`](../../cloud/ansible/openstack) folder.
+
+<a name="settings"></a>
+# Settings and recommended values
+You can configure all aspects of your Elastic Cloud Server and T-Pot before using the Playbook.  
+The settings are located in the following Ansible vars files:
+
+<a name="os-auth"></a>
+## OpenStack authentication variables
+Located at [`openstack/roles/deploy/vars/os_auth.yaml`](openstack/roles/deploy/vars/os_auth.yaml).  
+Enter your Open Telekom Cloud API user credentials here (username, password, project name, user domain name):  
+```
+auth_url: https://iam.eu-de.otc.t-systems.com/v3
+username: your_api_user
+password: your_password
+project_name: eu-de_your_project
+os_user_domain_name: OTC-EU-DE-000000000010000XXXXX
+```
+You can also perform different authentication methods like sourcing your `.ostackrc` file or using the OpenStack `clouds.yaml` file.  
+For more information have a look in the [os_server](https://docs.ansible.com/ansible/latest/modules/os_server_module.html) Ansible module documentation.
+
+<a name="remote-user"></a>
+## Ansible remote user
+You may have to adjust the `remote_user` in the Ansible Playbook under [`openstack/deploy_tpot.yaml`](openstack/deploy_tpot.yaml) depending on your Debian base image (e.g. on Open Telekom Cloud the default Debian user is `linux`).
+
+<a name="instance-settings"></a>
+## Instance settings
+Located at [`openstack/roles/deploy/vars/main.yaml`](openstack/roles/deploy/vars/main.yaml).  
+Here you can customize your virtual machine specifications:
+  - Specify the region name
+  - Choose an availability zone. For Open Telekom Cloud reference see [here](https://docs.otc.t-systems.com/en-us/endpoint/index.html).
+  - Change the OS image (For T-Pot we need Debian)
+  - (Optional) Change the volume size
+  - Specify your key pair (:warning: Mandatory)
+  - (Optional) Change the instance type (flavor)  
+    `s2.medium.8` corresponds to 1 vCPU and 8GB of RAM and is the minimum required flavor.  
+    A full list of Open telekom Cloud flavors can be found [here](https://docs.otc.t-systems.com/en-us/usermanual/ecs/en-us_topic_0035470096.html).
+
+```
+region_name: eu-de
+availability_zone: eu-de-03
+image: Standard_Debian_10_latest
+volume_size: 128
+key_name: your-KeyPair
+flavor: s2.medium.8
+```
+
+<a name="user-password"></a>
+## User password
+Located at [`openstack/roles/install/vars/main.yaml`](openstack/roles/install/vars/main.yaml).  
+Here you can set the password for your Debian user (**you should definitely change that**).
+```
+user_password: LiNuXuSeRPaSs#
+```
+
+<a name="tpot-conf"></a>
+## Configure `tpot.conf.dist`
+The file is located in [`iso/installer/tpot.conf.dist`](../../iso/installer/tpot.conf.dist).  
+Here you can choose:
+  - between the various T-Pot editions
+  - a username for the web interface
+  - a password for the web interface (**you should definitely change that**)
+
+```
+# tpot configuration file
+# myCONF_TPOT_FLAVOR=[STANDARD, SENSOR, INDUSTRIAL, COLLECTOR, NEXTGEN]
+myCONF_TPOT_FLAVOR='STANDARD'
+myCONF_WEB_USER='webuser'
+myCONF_WEB_PW='w3b$ecret'
+```
+
+<a name="ews-cfg"></a>
+## Optional: Custom `ews.cfg`
+Enable this by uncommenting the role in the [deploy_tpot.yaml](openstack/deploy_tpot.yaml) playbook.
+```
+#    - custom_ews
+```
+
+You can use a custom config file for `ewsposter`.  
+e.g. when you have your own credentials for delivering data to our [Sicherheitstacho](https://sicherheitstacho.eu/start/main).  
+You can find the `ews.cfg` template file here: [`openstack/roles/custom_ews/templates/ews.cfg`](openstack/roles/custom_ews/templates/ews.cfg) and adapt it for your needs.
+
+For setting custom credentials, these settings would be relevant for you (the rest of the file can stay as is):  
+```
+[MAIN]
+...
+contact = your_email_address
+...
+
+[EWS]
+...
+username = your_username
+token = your_token
+...
+```
+
+<a name="hpfeeds"></a>
+## Optional: Custom HPFEEDS
+Enable this by uncommenting the role in the [deploy_tpot.yaml](openstack/deploy_tpot.yaml) playbook.
+```
+#    - custom_hpfeeds
+```
+
+You can specify custom HPFEEDS in [`openstack/roles/custom_hpfeeds/templates/hpfeeds.cfg`](openstack/roles/custom_hpfeeds/templates/hpfeeds.cfg).  
+That file contains the defaults (turned off) and you can adapt it for your needs, e.g. for SISSDEN:
+```
+myENABLE=true
+myHOST=hpfeeds.sissden.eu
+myPORT=10000
+myCHANNEL=t-pot.events
+myCERT=/opt/ewsposter/sissden.pem
+myIDENT=your_user
+mySECRET=your_secret
+myFORMAT=json
+```
+
+<a name="deploy"></a>
+# Deploying a T-Pot :honey_pot::honeybee:
+Now, after configuring everything, we can finally start deploying T-Pots!  
+Go to the [`openstack`](openstack) folder and run the Ansible Playbook with:  
+`ansible-playbook deploy_tpot.yaml`  
+(Yes, it is as easy as that :smile:)
+
+If you are running on a machine which asks for a sudo password, you can use:  
+`ansible-playbook --ask-become-pass deploy_tpot.yaml`
+
+The Playbook will first install required packages on the Ansible Master and then deploy a new server instance.  
+After that, T-Pot gets installed and configured on the newly created host, optionally custom configs are applied and finally it reboots.
+
+<a name="documentation"></a>
+# Further documentation
+- [Ansible Documentation](https://docs.ansible.com/ansible/latest/)
+- [Cloud modules — Ansible Documentation](https://docs.ansible.com/ansible/latest/modules/list_of_cloud_modules.html)
+- [os_server – Create/Delete Compute Instances from OpenStack — Ansible Documentation](https://docs.ansible.com/ansible/latest/modules/os_server_module.html)
+- [Open Telekom Cloud Help Center](https://docs.otc.t-systems.com/)
+- [Open Telekom Cloud API Overview](https://docs.otc.t-systems.com/en-us/api/wp/en-us_topic_0052070394.html)

cloud/ansible/openstack/ansible.cfg

@@ -0,0 +1,6 @@
+[defaults]
+host_key_checking = false
+
+[ssh_connection]
+scp_if_ssh = true
+ssh_args = -o ServerAliveInterval=60

cloud/ansible/openstack/deploy_tpot.yaml

@@ -0,0 +1,21 @@
+- name: Check host prerequisites
+  hosts: localhost
+  become: yes
+  roles:
+    - check
+
+- name: Deploy instance
+  hosts: localhost
+  roles:
+    - deploy
+
+- name: Install T-Pot on new instance
+  hosts: TPOT
+  remote_user: linux
+  become: yes
+  gather_facts: no
+  roles:
+    - install
+#    - custom_ews
+#    - custom_hpfeeds
+    - reboot

cloud/ansible/openstack/roles/check/tasks/main.yaml

@@ -0,0 +1,17 @@
+- name: Install dependencies
+  package:
+    name:
+      - pwgen
+      - python-setuptools
+      - python-pip
+    state: present
+
+- name: Install openstacksdk
+  pip:
+    name: openstacksdk
+
+- name: Check if agent forwarding is enabled
+  fail:
+    msg: Please enable agent forwarding to allow Ansible to connect to the remote host!
+  ignore_errors: yes
+  when: lookup('env','SSH_AUTH_SOCK') == ""

cloud/ansible/openstack/roles/custom_ews/tasks/main.yaml

@@ -0,0 +1,13 @@
+- name: Copy ews configuration file
+  template:
+    src: ../templates/ews.cfg
+    dest: /data/ews/conf
+    owner: root
+    group: root
+    mode: 0644
+
+- name: Patching tpot.yml with custom ews configuration file
+  lineinfile:
+    path: /opt/tpot/etc/tpot.yml
+    insertafter: "/opt/ewsposter/ews.ip"
+    line: "     - /data/ews/conf/ews.cfg:/opt/ewsposter/ews.cfg"

cloud/ansible/openstack/roles/custom_ews/templates/ews.cfg

@@ -0,0 +1,137 @@
+[MAIN]
+homedir = /opt/ewsposter/
+spooldir = /opt/ewsposter/spool/
+logdir = /opt/ewsposter/log/
+del_malware_after_send = false
+send_malware = true
+sendlimit = 500
+contact = your_email_address
+proxy =
+ip =
+
+[EWS]
+ews = true
+username = your_username
+token = your_token
+rhost_first = https://community.sicherheitstacho.eu/ews-0.1/alert/postSimpleMessage
+rhost_second = https://community.sicherheitstacho.eu/ews-0.1/alert/postSimpleMessage
+ignorecert = false
+
+[HPFEED]
+hpfeed = %(EWS_HPFEEDS_ENABLE)s
+host = %(EWS_HPFEEDS_HOST)s
+port = %(EWS_HPFEEDS_PORT)s
+channels = %(EWS_HPFEEDS_CHANNELS)s
+ident = %(EWS_HPFEEDS_IDENT)s
+secret= %(EWS_HPFEEDS_SECRET)s
+# path/to/certificate for tls broker - or "false" for non-tls broker
+tlscert = %(EWS_HPFEEDS_TLSCERT)s
+# hpfeeds submission format: "ews" (xml) or "json"
+hpfformat = %(EWS_HPFEEDS_FORMAT)s
+
+[EWSJSON]
+json = false
+jsondir = /data/ews/json/
+
+[GLASTOPFV3]
+glastopfv3 = true
+nodeid = glastopfv3-{{ ansible_hostname }}
+sqlitedb = /data/glastopf/db/glastopf.db
+malwaredir = /data/glastopf/data/files/
+
+[GLASTOPFV2]
+glastopfv2 = false
+nodeid =
+mysqlhost =
+mysqldb =
+mysqluser =
+mysqlpw =
+malwaredir =
+
+[KIPPO]
+kippo = false
+nodeid =
+mysqlhost =
+mysqldb =
+mysqluser =
+mysqlpw =
+malwaredir =
+
+[COWRIE]
+cowrie = true
+nodeid = cowrie-{{ ansible_hostname }}
+logfile = /data/cowrie/log/cowrie.json
+
+[DIONAEA]
+dionaea = true
+nodeid = dionaea-{{ ansible_hostname }}
+malwaredir = /data/dionaea/binaries/
+sqlitedb = /data/dionaea/log/dionaea.sqlite
+
+[HONEYTRAP]
+honeytrap = true
+nodeid = honeytrap-{{ ansible_hostname }}
+newversion = true
+payloaddir = /data/honeytrap/attacks/
+attackerfile = /data/honeytrap/log/attacker.log
+
+[RDPDETECT]
+rdpdetect = false
+nodeid =
+iptableslog =
+targetip =
+
+[EMOBILITY]
+eMobility = false
+nodeid = emobility-{{ ansible_hostname }}
+logfile = /data/emobility/log/centralsystemEWS.log
+
+[CONPOT]
+conpot = true
+nodeid = conpot-{{ ansible_hostname }}
+logfile = /data/conpot/log/conpot*.json
+
+[ELASTICPOT]
+elasticpot = true
+nodeid = elasticpot-{{ ansible_hostname }}
+logfile = /data/elasticpot/log/elasticpot.log
+
+[SURICATA]
+suricata = true
+nodeid = suricata-{{ ansible_hostname }}
+logfile = /data/suricata/log/eve.json
+
+[MAILONEY]
+mailoney = true
+nodeid = mailoney-{{ ansible_hostname }}
+logfile = /data/mailoney/log/commands.log
+
+[RDPY]
+rdpy = true
+nodeid = rdpy-{{ ansible_hostname }}
+logfile = /data/rdpy/log/rdpy.log
+
+[VNCLOWPOT]
+vnclowpot = true
+nodeid = vnclowpot-{{ ansible_hostname }}
+logfile = /data/vnclowpot/log/vnclowpot.log
+
+[HERALDING]
+heralding = true
+nodeid = heralding-{{ ansible_hostname }}
+logfile = /data/heralding/log/auth.csv
+
+[CISCOASA]
+ciscoasa = true
+nodeid = ciscoasa-{{ ansible_hostname }}
+logfile = /data/ciscoasa/log/ciscoasa.log
+
+[TANNER]
+tanner = true
+nodeid = tanner-{{ ansible_hostname }}
+logfile = /data/tanner/log/tanner_report.json
+
+[GLUTTON]
+glutton = true
+nodeid = glutton-{{ ansible_hostname }}
+logfile = /data/glutton/log/glutton.log

cloud/ansible/openstack/roles/custom_hpfeeds/files/hpfeeds.cfg

@@ -0,0 +1,8 @@
+myENABLE=false
+myHOST=host
+myPORT=port
+myCHANNEL=channels
+myCERT=false
+myIDENT=user
+mySECRET=secret
+myFORMAT=json

cloud/ansible/openstack/roles/custom_hpfeeds/tasks/main.yaml

@@ -0,0 +1,12 @@
+- name: Copy hpfeeds configuration file
+  copy:
+    src: ../files/hpfeeds.cfg
+    dest: /data/ews/conf
+    owner: tpot
+    group: tpot
+    mode: 0770
+  register: config
+
+- name: Applying hpfeeds settings
+  command: /opt/tpot/bin/hpfeeds_optin.sh --conf=/data/ews/conf/hpfeeds.cfg
+  when: config.changed == true

cloud/ansible/openstack/roles/deploy/tasks/main.yaml

@@ -0,0 +1,94 @@
+- name: Create T-Pot name
+  shell: echo t-pot-ansible-$(pwgen -ns 6 -1)
+  register: tpot_name
+
+- name: Import OpenStack authentication variables
+  include_vars:
+    file: roles/deploy/vars/os_auth.yaml
+  no_log: true
+
+- name: Create security group
+  os_security_group:
+    auth:
+      auth_url: "{{ auth_url }}"
+      username: "{{ username }}"
+      password: "{{ password }}"
+      project_name: "{{ project_name }}"
+      os_user_domain_name: "{{ os_user_domain_name }}"
+    name: sg-tpot-any
+    description: tpot any-any
+
+- name: Add rules to security group
+  os_security_group_rule:
+    auth:
+      auth_url: "{{ auth_url }}"
+      username: "{{ username }}"
+      password: "{{ password }}"
+      project_name: "{{ project_name }}"
+      os_user_domain_name: "{{ os_user_domain_name }}"
+    security_group: sg-tpot-any
+    remote_ip_prefix: 0.0.0.0/0
+
+- name: Create network
+  os_network:
+    auth:
+      auth_url: "{{ auth_url }}"
+      username: "{{ username }}"
+      password: "{{ password }}"
+      project_name: "{{ project_name }}"
+      os_user_domain_name: "{{ os_user_domain_name }}"
+    name: network-tpot
+
+- name: Create subnet
+  os_subnet:
+    auth:
+      auth_url: "{{ auth_url }}"
+      username: "{{ username }}"
+      password: "{{ password }}"
+      project_name: "{{ project_name }}"
+      os_user_domain_name: "{{ os_user_domain_name }}"
+    network_name: network-tpot
+    name: subnet-tpot
+    cidr: 192.168.0.0/24
+    dns_nameservers:
+      - 1.1.1.1
+      - 8.8.8.8
+
+- name: Create router
+  os_router:
+    auth:
+      auth_url: "{{ auth_url }}"
+      username: "{{ username }}"
+      password: "{{ password }}"
+      project_name: "{{ project_name }}"
+      os_user_domain_name: "{{ os_user_domain_name }}"
+    name: router-tpot
+    interfaces:
+      - subnet-tpot
+
+- name: Launch an instance
+  os_server:
+    auth:
+      auth_url: "{{ auth_url }}"
+      username: "{{ username }}"
+      password: "{{ password }}"
+      project_name: "{{ project_name }}"
+      os_user_domain_name: "{{ os_user_domain_name }}"
+    name: "{{ tpot_name.stdout }}"
+    region_name: "{{ region_name }}"
+    availability_zone: "{{ availability_zone }}"
+    image: "{{ image }}"
+    boot_from_volume: yes
+    volume_size: "{{ volume_size }}"
+    key_name: "{{ key_name }}"
+    timeout: 200
+    flavor: "{{ flavor }}"
+    security_groups: sg-tpot-any
+    network: network-tpot
+  register: tpot
+
+- name: Add instance to inventory
+  add_host:
+    hostname: "{{ tpot_name.stdout }}"
+    ansible_host: "{{ tpot.server.public_v4 }}"
+    groups: TPOT

cloud/ansible/openstack/roles/deploy/vars/main.yaml

@@ -0,0 +1,6 @@
+region_name: eu-de
+availability_zone: eu-de-03
+image: Standard_Debian_10_latest
+volume_size: 128
+key_name: your-KeyPair
+flavor: s2.medium.8

cloud/ansible/openstack/roles/deploy/vars/os_auth.yaml

@@ -0,0 +1,5 @@
+auth_url: https://iam.eu-de.otc.t-systems.com/v3
+username: your_api_user
+password: your_password
+project_name: eu-de_your_project
+os_user_domain_name: OTC-EU-DE-000000000010000XXXXX

cloud/ansible/openstack/roles/install/tasks/main.yaml

@@ -0,0 +1,48 @@
+- name: Waiting for SSH connection
+  wait_for_connection:
+
+- name: Gathering facts
+  setup:
+
+- name: Cloning T-Pot install directory
+  git:
+    repo: "https://github.com/dtag-dev-sec/tpotce.git"
+    dest: /root/tpot
+
+- name: Prepare to set user password 
+  set_fact:
+    user_name: "{{ ansible_user }}"
+    user_salt: "s0mew1ck3dTpoT"
+  no_log: true
+
+- name: Changing password for user {{ user_name }}
+  user:
+   name: "{{ ansible_user }}"
+   password: "{{ user_password | password_hash('sha512', user_salt) }}"
+   state: present
+   shell: /bin/bash
+
+- name: Copy T-Pot configuration file
+  template:
+    src: ../../../../../../iso/installer/tpot.conf.dist
+    dest: /root/tpot.conf
+    owner: root
+    group: root
+    mode: 0644
+
+- name: Install T-Pot on instance -  be patient, this might take 15 to 30 minutes depending on the connection speed.
+  command: /root/tpot/iso/installer/install.sh --type=auto --conf=/root/tpot.conf
+
+- name: Delete T-Pot configuration file
+  file:
+    path: /root/tpot.conf
+    state: absent
+
+- name: Change unattended-upgrades to take default action
+  blockinfile:
+    dest: /etc/apt/apt.conf.d/50unattended-upgrades
+    block: |
+      Dpkg::Options {
+        "--force-confdef";
+        "--force-confold";
+      }

cloud/ansible/openstack/roles/install/vars/main.yaml

@@ -0,0 +1 @@
+user_password: LiNuXuSeRPaSs#

cloud/ansible/openstack/roles/reboot/tasks/main.yaml

@@ -0,0 +1,16 @@
+- name: Finally rebooting T-Pot
+  command: shutdown -r now
+  async: 1
+  poll: 0
+
+- name: Next login options
+  debug:
+    msg:
+    - "*****    SSH Access:"
+    - "*****    ssh {{ ansible_user }}@{{ ansible_host }} -p 64295"
+    - ""
+    - "*****    Web UI:"
+    - "*****    https://{{ ansible_host }}:64297"
+    - ""
+    - "*****    Admin UI:"
+    - "*****    https://{{ ansible_host }}:64294"

cloud/terraform/.gitignore

@@ -0,0 +1,2 @@
+**/.terraform
+**/terraform.*

cloud/terraform/README.md

@@ -0,0 +1,131 @@
+# T-Pot Terraform
+
+This [Terraform](https://www.terraform.io/) configuration can be used to provision a T-Pot instance in AWS in addition to all of the necessary pre-requisites. Specifically, the following resources will be created:
+
+* EC2 instance:
+  * t3.large (2 vCPU, 8 GiB RAM)
+  * 128GB disk
+  * [Debian Stretch](https://wiki.debian.org/Cloud/AmazonEC2Image/Stretch) (The T-Pot installation script will then upgrade this to Debian Sid)
+* AWS Security Group:
+  * TCP/UDP ports <= 64000 open to the Internet
+  * TCP ports 64294, 64295 and 64297 open to a chosen administrative IP
+
+[Cloud-init](https://cloudinit.readthedocs.io/en/latest/) is used to bootstrap the instance and install T-Pot on startup. Additional provisioning using Ansible etc. is not required.
+
+The following resources are NOT automatically created and need to be specified in the configuration below:
+
+* VPC
+* Subnet
+
+## Pre-Requisites
+
+* [Terraform](https://www.terraform.io/) 0.12
+* AWS Account
+  * Existing VPC. VPC ID should be specified in configuration below
+  * Existing subnet. Subnet ID should be specified in configuration below
+* AWS Authentication credentials should be [set using environment variables](https://www.terraform.io/docs/providers/aws/index.html#environment-variables)
+
+## Required Configuration Changes
+
+### Terraform Variables
+
+In `aws/variables.tf`, change the following variables to correspond to your existing EC2 infrastructure:
+
+* `admin_ip` - source IP address(es) that you will use to administer the system. Connections to TCP ports 64294, 64295 and 64297 will be allowed from this IP only. Multiple IPs or CIDR blocks can be specified in the format: `["127.0.0.1/32", "192.168.0.0/24"]`
+* `ec2_vpc_id`
+* `ec2_subnet_id`
+* `ec2_region`
+
+### Admin Credentials
+
+In `tpot.conf`, change the following variables:
+
+```
+myCONF_WEB_USER='webuser'
+myCONF_WEB_PW='w3b$ecret'
+```
+
+This will be used to configure credentials for the T-Pot Kibana interface. Refer to [Options](https://github.com/dtag-dev-sec/tpotce#options) for more information.
+
+## Initialising
+
+The [`terraform init`](https://www.terraform.io/docs/commands/init.html) command is used to initialize a working directory containing Terraform configuration files.
+
+```
+$ cd aws
+$ terraform init
+
+Initializing the backend...
+
+Initializing provider plugins...
+- Checking for available provider plugins...
+- Downloading plugin for provider "aws" (terraform-providers/aws) 2.16.0...
+
+The following providers do not have any version constraints in configuration,
+so the latest version was installed.
+
+To prevent automatic upgrades to new major versions that may contain breaking
+changes, it is recommended to add version = "..." constraints to the
+corresponding provider blocks in configuration, with the constraint strings
+suggested below.
+
+* provider.aws: version = "~> 2.16"
+
+Terraform has been successfully initialized!
+
+You may now begin working with Terraform. Try running "terraform plan" to see
+any changes that are required for your infrastructure. All Terraform commands
+should now work.
+
+If you ever set or change modules or backend configuration for Terraform,
+rerun this command to reinitialize your working directory. If you forget, other
+commands will detect it and remind you to do so if necessary.
+```
+
+## Applying the Configuration
+
+The [`terraform apply`](https://www.terraform.io/docs/commands/apply.html) command is used to apply the changes required to reach the desired state of the configuration, or the pre-determined set of actions generated by a [`terraform plan`](https://www.terraform.io/docs/commands/plan.html) execution plan.
+
+```
+$ terraform apply
+
+An execution plan has been generated and is shown below.
+Resource actions are indicated with the following symbols:
+  + create
+
+Terraform will perform the following actions:
+
+  # aws_instance.tpot will be created
+  ...
+
+  # aws_security_group.tpot will be created
+  ...
+
+Plan: 2 to add, 0 to change, 0 to destroy.
+
+Do you want to perform these actions?
+  Terraform will perform the actions described above.
+  Only 'yes' will be accepted to approve.
+
+  Enter a value:
+```
+
+This will perform the following actions:
+
+1. Create EC2 security group
+2. Start a Debian EC2 instance
+3. Update all packages and reboot if necessary
+4. Install T-Pot and required dependencies
+5. Reboot
+
+## Connecting to the Instance
+
+### SSH
+
+Prior to the final reboot, you will temporarily be able to SSH to port 22 as per standard. Following the reboot, port 22 is used for the honeypot. The *real* SSH server is listening on port **64295**
+
+### Browser
+
+https://www.example.com:64297/
+
+Replace with the FQDN of your EC2 instance. Refer to the [T-POT documentation](https://github.com/dtag-dev-sec/tpotce#ssh-and-web-access) for further details.

cloud/terraform/aws/main.tf

@@ -0,0 +1,66 @@
+provider "aws" {
+  region = var.ec2_region
+}
+
+resource "aws_security_group" "tpot" {
+  name        = "T-Pot"
+  description = "T-Pot Honeypot"
+  vpc_id      = var.ec2_vpc_id
+  ingress {
+    from_port   = 0
+    to_port     = 64000
+    protocol    = "tcp"
+    cidr_blocks = ["0.0.0.0/0"]
+  }
+  ingress {
+    from_port   = 0
+    to_port     = 64000
+    protocol    = "udp"
+    cidr_blocks = ["0.0.0.0/0"]
+  }
+  ingress {
+    from_port   = 64294
+    to_port     = 64294
+    protocol    = "tcp"
+    cidr_blocks = var.admin_ip
+  }
+  ingress {
+    from_port   = 64295
+    to_port     = 64295
+    protocol    = "tcp"
+    cidr_blocks = var.admin_ip
+  }
+  ingress {
+    from_port   = 64297
+    to_port     = 64297
+    protocol    = "tcp"
+    cidr_blocks = var.admin_ip
+  }
+  egress {
+    from_port   = 0
+    to_port     = 0
+    protocol    = "-1"
+    cidr_blocks = ["0.0.0.0/0"]
+  }
+  tags = {
+    Name = "T-Pot"
+  }
+}
+
+resource "aws_instance" "tpot" {
+  ami           = var.ec2_ami[var.ec2_region]
+  instance_type = var.ec2_instance_type
+  key_name      = var.ec2_ssh_key_name
+  subnet_id     = var.ec2_subnet_id
+  tags = {
+    Name = "T-Pot Honeypot"
+  }
+  root_block_device {
+    volume_type           = "gp2"
+    volume_size           = 128
+    delete_on_termination = true
+  }
+  user_data              = "${file("../cloud-init.yaml")}    content: ${base64encode(file("../tpot.conf"))}"
+  vpc_security_group_ids = [aws_security_group.tpot.id]
+  associate_public_ip_address = true
+}

cloud/terraform/aws/outputs.tf

@@ -0,0 +1,12 @@
+output "Admin_UI" {
+  value = "https://${aws_instance.tpot.public_dns}:64294/"
+}
+
+output "SSH_Access" {
+  value = "ssh -i {private_key_file} -p 64295 admin@${aws_instance.tpot.public_dns}"
+}
+
+output "Web_UI" {
+  value = "https://${aws_instance.tpot.public_dns}:64297/"
+}
+

cloud/terraform/aws/variables.tf

@@ -0,0 +1,54 @@
+variable "admin_ip" {
+  default     = ["127.0.0.1/32"]
+  description = "admin IP addresses in CIDR format"
+}
+
+variable "ec2_vpc_id" {
+  description = "ID of AWS VPC"
+  default     = "vpc-XXX"
+}
+
+variable "ec2_subnet_id" {
+  description = "ID of AWS VPC subnet"
+  default     = "subnet-YYY"
+}
+
+variable "ec2_region" {
+  description = "AWS region to launch servers"
+  default     = "eu-west-1"
+}
+
+variable "ec2_ssh_key_name" {
+  default = "default"
+}
+
+# https://aws.amazon.com/ec2/instance-types/
+# t3.large = 2 vCPU, 8 GiB RAM
+variable "ec2_instance_type" {
+  default = "t3.large"
+}
+
+# Refer to https://wiki.debian.org/Cloud/AmazonEC2Image/Buster
+variable "ec2_ami" {
+  type = map(string)
+  default = {
+    "ap-east-1"      = "ami-b7d0abc6"
+    "ap-northeast-1" = "ami-01f4f0c9374675b99"
+    "ap-northeast-2" = "ami-0855cb0c55370c38c"
+    "ap-south-1"     = "ami-00d7d1cbdcb087cf3"
+    "ap-southeast-1" = "ami-03779b1b2fbb3a9d4"
+    "ap-southeast-2" = "ami-0ce3a7c68c6b1678d"
+    "ca-central-1"   = "ami-037099906a22f210f"
+    "eu-central-1"   = "ami-0845c3902a6f2af32"
+    "eu-north-1"     = "ami-e634bf98"
+    "eu-west-1"      = "ami-06a53bf81914447b5"
+    "eu-west-2"      = "ami-053d9f0770cd2e34c"
+    "eu-west-3"      = "ami-060bf1f444f742af9"
+    "me-south-1"     = "ami-04a9a536105c72d30"
+    "sa-east-1"      = "ami-0a5fd18ed0b9c7f35"
+    "us-east-1"      = "ami-01db78123b2b99496"
+    "us-east-2"      = "ami-010ffea14ff17ebf5"
+    "us-west-1"      = "ami-0ed1af421f2a3cf40"
+    "us-west-2"      = "ami-030a304a76b181155"
+  }
+}

cloud/terraform/aws/versions.tf

@@ -0,0 +1,3 @@
+terraform {
+  required_version = ">= 0.12"
+}

cloud/terraform/cloud-init.yaml

@@ -0,0 +1,25 @@
+#cloud-config
+timezone: UTC
+
+package_update: true
+package_upgrade: true
+package_reboot_if_required: true
+
+packages:
+  - git
+
+runcmd:
+  - git clone https://github.com/dtag-dev-sec/tpotce /root/tpot
+  - /root/tpot/iso/installer/install.sh --type=auto --conf=/root/tpot.conf
+  - rm /root/tpot.conf
+  - /sbin/shutdown -r +5
+
+# The contents of tpot.conf will be base64 encoded and appended to this file
+# via the terraform configuration in main.tf
+#
+# Make sure there are no trailing new lines after "permissions" below
+write_files:
+  - encoding: b64
+    owner: root:root
+    path: /root/tpot.conf
+    permissions: '0600'

cloud/terraform/tpot.conf

@@ -0,0 +1,5 @@
+# tpot configuration file
+# myCONF_TPOT_FLAVOR=[STANDARD, SENSOR, INDUSTRIAL, COLLECTOR, NEXTGEN]
+myCONF_TPOT_FLAVOR='STANDARD'
+myCONF_WEB_USER='webuser'
+myCONF_WEB_PW='w3b$ecret'

compose/customizer.py

@@ -1,182 +0,0 @@
-from datetime import datetime
-import yaml
-
-version = \
-"""
- ____  [T-Pot]         _            ____        _ _     _
-/ ___|  ___ _ ____   _(_) ___ ___  | __ ) _   _(_) | __| | ___ _ __
-\___ \ / _ \ '__\ \ / / |/ __/ _ \ |  _ \| | | | | |/ _` |/ _ \ '__|
- ___) |  __/ |   \ V /| | (_|  __/ | |_) | |_| | | | (_| |  __/ |
-|____/ \___|_|    \_/ |_|\___\___| |____/ \__,_|_|_|\__,_|\___|_| v0.21
-    
-# This script is intended for users who want to build a customized docker-compose.yml forT-Pot.
-# T-Pot Service Builder will ask for all the docker services to be included in docker-compose.yml.
-# The configuration file will be checked for conflicting ports.
-# Port conflicts have to be resolve manually or re-running the script and excluding the conflicting services.
-# Review the resulting docker-compose-custom.yml and adjust to your needs by (un)commenting the corresponding lines in the config.
-"""
-
-header = \
-"""# T-Pot: CUSTOM EDITION
-# Generated on: {current_date}
-"""
-
-config_filename = "tpot_services.yml"
-service_filename = "docker-compose-custom.yml"
-
-
-def load_config(filename):
-    try:
-        with open(filename, 'r') as file:
-            config = yaml.safe_load(file)
-    except:
-        print_color(f"Error: {filename} not found. Exiting.", "red")
-        exit()
-    return config
-
-
-def prompt_service_include(service_name):
-    while True:
-        try:
-            response = input(f"Include {service_name}? (y/n): ").strip().lower()
-            if response in ['y', 'n']:
-                return response == 'y'
-            else:
-                print_color("Please enter 'y' for yes or 'n' for no.", "red")
-        except KeyboardInterrupt:
-            print()
-            print_color("Interrupted by user. Exiting.", "red")
-            print()
-            exit()
-
-
-def check_port_conflicts(selected_services):
-    all_ports = {}
-    conflict_ports = []
-
-    for service_name, config in selected_services.items():
-        ports = config.get('ports', [])
-        for port in ports:
-            # Split the port mapping and take only the host port part
-            parts = port.split(':')
-            host_port = parts[1] if len(parts) == 3 else (parts[0] if parts[1].isdigit() else parts[1])
-
-            # Check for port conflict and associate it with the service name
-            if host_port in all_ports:
-                conflict_ports.append((service_name, host_port))
-                if all_ports[host_port] not in [service for service, _ in conflict_ports]:
-                    conflict_ports.append((all_ports[host_port], host_port))
-            else:
-                all_ports[host_port] = service_name
-
-    if conflict_ports:
-        print_color("[WARNING] - Port conflict(s) detected:", "red")
-        for service, port in conflict_ports:
-            print_color(f"{service}: {port}", "red")
-        return True
-    return False
-
-
-
-def print_color(text, color):
-    colors = {
-        "red": "\033[91m",
-        "green": "\033[92m",
-        "blue": "\033[94m",  # Added blue
-        "magenta": "\033[95m",  # Added magenta
-        "end": "\033[0m",
-    }
-    print(f"{colors[color]}{text}{colors['end']}")
-
-def enforce_dependencies(selected_services, services):
-    # If snare or any tanner services are selected, ensure all are enabled
-    tanner_services = {'snare', 'tanner', 'tanner_redis', 'tanner_phpox', 'tanner_api'}
-    if tanner_services.intersection(selected_services):
-        print_color("[OK] - For Snare / Tanner to work all required services have been added to your configuration.", "green")
-        for service in tanner_services:
-            selected_services[service] = services[service]
-
-    # If kibana is enabled, also enable elasticsearch
-    if 'kibana' in selected_services:
-        selected_services['elasticsearch'] = services['elasticsearch']
-        print_color("[OK] - Kibana requires Elasticsearch which has been added to your configuration.", "green")
-
-    # If spiderfoot is enabled, also enable nginx
-    if 'spiderfoot' in selected_services:
-        selected_services['nginx'] = services['nginx']
-        print_color("[OK] - Spiderfoot requires Nginx which has been added to your configuration.","green")
-
-
-    # If any map services are detected, enable logstash, elasticsearch, nginx, and all map services
-    map_services = {'map_web', 'map_redis', 'map_data'}
-    if map_services.intersection(selected_services):
-        print_color("[OK] - For AttackMap to work all required services have been added to your configuration.", "green")
-        for service in map_services.union({'elasticsearch', 'nginx'}):
-            selected_services[service] = services[service]
-
-    # honeytrap and glutton cannot be active at the same time, always vote in favor of honeytrap
-    if 'honeytrap' in selected_services and 'glutton' in selected_services:
-        # Remove glutton and notify
-        del selected_services['glutton']
-        print_color("[OK] - Honeytrap and Glutton cannot be active at the same time. Glutton has been removed from your configuration.","green")
-
-
-def remove_unused_networks(selected_services, services, networks):
-    used_networks = set()
-    # Identify networks used by selected services
-    for service_name in selected_services:
-        service_config = services[service_name]
-        if 'networks' in service_config:
-            for network in service_config['networks']:
-                used_networks.add(network)
-
-    # Remove unused networks
-    for network in list(networks):
-        if network not in used_networks:
-            del networks[network]
-
-
-def main():
-    config = load_config(config_filename)
-
-    # Separate services and networks
-    services = config['services']
-    networks = config.get('networks', {})
-    selected_services = {'tpotinit': services['tpotinit'],
-                         'logstash': services['logstash']}  # Always include tpotinit and logstash
-
-    for service_name, service_config in services.items():
-        if service_name not in selected_services:  # Skip already included services
-            if prompt_service_include(service_name):
-                selected_services[service_name] = service_config
-
-    # Enforce dependencies
-    enforce_dependencies(selected_services, services)
-
-    # Remove unused networks based on selected services
-    remove_unused_networks(selected_services, services, networks)
-
-    output_config = {
-        'version': '3.9',
-        'networks': networks,
-        'services': selected_services,
-    }
-
-    current_date = datetime.now().strftime("%Y-%m-%d %H:%M:%S")
-
-    with open(service_filename, 'w') as file:
-        file.write(header.format(current_date=current_date))
-        yaml.dump(output_config, file, default_flow_style=False, sort_keys=False, indent=2)
-
-    if check_port_conflicts(selected_services):
-        print_color(f"[WARNING] - Adjust the conflicting ports in the {service_filename} or re-run the script and select services that do not occupy the same port(s).",
-            "red")
-    else:
-        print_color(f"[OK] - Custom {service_filename} has been generated without port conflicts.", "green")
-    print_color(f"Copy {service_filename} to ~/tpotce and test with: docker compose -f {service_filename} up", "blue")
-    print_color(f"If everything works, exit with CTRL-C and replace docker-compose.yml with the new config.", "blue")
-
-
-if __name__ == "__main__":
-    print_color(version, "magenta")
-    main()

compose/mac_win.yml

@@ -1,825 +0,0 @@
-# T-Pot: MAC_WIN
-version: '3.9'
-
-networks:
-  tpotinit_local:
-  adbhoney_local:
-  ciscoasa_local:
-  citrixhoneypot_local:
-  conpot_local_IEC104:
-  conpot_local_guardian_ast:
-  conpot_local_ipmi:
-  conpot_local_kamstrup_382:
-  cowrie_local:
-  ddospot_local:
-  dicompot_local:
-  dionaea_local:
-  elasticpot_local:
-  heralding_local:
-  ipphoney_local:
-  mailoney_local:
-  medpot_local:
-  redishoneypot_local:
-  sentrypeer_local:
-  tanner_local:
-  wordpot_local:
-  nginx_local:
-  ewsposter_local:
-
-services:
-
-########################################
-#### DEV
-########################################
-#### T-Pot Init - Never delete this!
-########################################
-
-# T-Pot Init Service
-  tpotinit:
-    container_name: tpotinit
-    env_file:
-     - .env
-    restart: always
-    stop_grace_period: 60s
-    tmpfs:
-     - /tmp/etc:uid=2000,gid=2000
-     - /tmp/:uid=2000,gid=2000
-    networks:
-     - tpotinit_local
-    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
-     - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
-     - ${TPOT_DATA_PATH}:/data
-
-
-##################
-#### Honeypots
-##################
-
-# Adbhoney service
-  adbhoney:
-    container_name: adbhoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - adbhoney_local
-    ports:
-     - "5555:5555"
-    image: ${TPOT_REPO}/adbhoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/adbhoney/log:/opt/adbhoney/log
-     - ${TPOT_DATA_PATH}/adbhoney/downloads:/opt/adbhoney/dl
-
-# Ciscoasa service
-  ciscoasa:
-    container_name: ciscoasa
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/ciscoasa:uid=2000,gid=2000
-    networks:
-     - ciscoasa_local
-    ports:
-     - "5000:5000/udp"
-     - "8443:8443"
-    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
-
-# CitrixHoneypot service
-  citrixhoneypot:
-    container_name: citrixhoneypot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - citrixhoneypot_local
-    ports:
-     - "443:443"
-    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
-
-# Conpot IEC104 service
-  conpot_IEC104:
-    container_name: conpot_iec104
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
-     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
-     - CONPOT_TEMPLATE=IEC104
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_IEC104
-    ports:
-     - "161:161/udp"
-     - "2404:2404"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot guardian_ast service
-  conpot_guardian_ast:
-    container_name: conpot_guardian_ast
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_guardian_ast.json
-     - CONPOT_LOG=/var/log/conpot/conpot_guardian_ast.log
-     - CONPOT_TEMPLATE=guardian_ast
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_guardian_ast
-    ports:
-     - "10001:10001"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot ipmi
-  conpot_ipmi:
-    container_name: conpot_ipmi
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
-     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
-     - CONPOT_TEMPLATE=ipmi
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_ipmi
-    ports:
-     - "623:623/udp"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot kamstrup_382
-  conpot_kamstrup_382:
-    container_name: conpot_kamstrup_382
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
-     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
-     - CONPOT_TEMPLATE=kamstrup_382
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_kamstrup_382
-    ports:
-     - "1025:1025"
-     - "50100:50100"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Cowrie service
-  cowrie:
-    container_name: cowrie
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-      - /tmp/cowrie:uid=2000,gid=2000
-      - /tmp/cowrie/data:uid=2000,gid=2000
-    networks:
-      - cowrie_local
-    ports:
-      - "22:22"
-      - "23:23"
-    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
-      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
-      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
-      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
-
-# Ddospot service
-  ddospot:
-    container_name: ddospot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ddospot_local
-    ports:
-     - "19:19/udp"
-     - "53:53/udp"
-     - "123:123/udp"
-#     - "161:161/udp"
-     - "1900:1900/udp"
-    image: ${TPOT_REPO}/ddospot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ddospot/log:/opt/ddospot/ddospot/logs
-     - ${TPOT_DATA_PATH}/ddospot/bl:/opt/ddospot/ddospot/bl
-     - ${TPOT_DATA_PATH}/ddospot/db:/opt/ddospot/ddospot/db
-
-# Dicompot service
-# Get the Horos Client for testing: https://horosproject.org/
-# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
-# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
-  dicompot:
-    container_name: dicompot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dicompot_local
-    ports:
-     - "11112:11112"
-    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
-#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
-
-# Dionaea service
-  dionaea:
-    container_name: dionaea
-    stdin_open: true
-    tty: true
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dionaea_local
-    ports:
-     - "20:20"
-     - "21:21"
-     - "42:42"
-     - "69:69/udp"
-     - "81:81"
-     - "135:135"
-     # - "443:443"
-     - "445:445"
-     - "1433:1433"
-     - "1723:1723"
-     - "1883:1883"
-     - "3306:3306"
-     # - "5060:5060"
-     # - "5060:5060/udp"
-     # - "5061:5061"
-     - "27017:27017"
-    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
-     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
-     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
-     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
-     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
-     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
-
-# ElasticPot service
-  elasticpot:
-    container_name: elasticpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - elasticpot_local
-    ports:
-     - "9200:9200"
-    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
-
-# Heralding service
-  heralding:
-    container_name: heralding
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/heralding:uid=2000,gid=2000
-    networks:
-     - heralding_local
-    ports:
-    # - "21:21"
-    # - "22:22"
-    # - "23:23"
-    # - "25:25"
-    # - "80:80"
-     - "110:110"
-     - "143:143"
-    # - "443:443"
-     - "465:465"
-     - "993:993"
-     - "995:995"
-    # - "3306:3306"
-    # - "3389:3389"
-     - "1080:1080"
-     - "5432:5432"
-     - "5900:5900"
-    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
-
-# Ipphoney service
-  ipphoney:
-    container_name: ipphoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ipphoney_local
-    ports:
-     - "631:631"
-    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
-
-# Mailoney service
-  mailoney:
-    container_name: mailoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - HPFEEDS_SERVER=
-     - HPFEEDS_IDENT=user
-     - HPFEEDS_SECRET=pass
-     - HPFEEDS_PORT=20000
-     - HPFEEDS_CHANNELPREFIX=prefix
-    networks:
-     - mailoney_local
-    ports:
-     - "25:25"
-     - "587:25"
-    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
-
-# Medpot service
-  medpot:
-    container_name: medpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - medpot_local
-    ports:
-     - "2575:2575"
-    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
-
-# Redishoneypot service
-  redishoneypot:
-    container_name: redishoneypot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - redishoneypot_local
-    ports:
-     - "6379:6379"
-    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
-
-# SentryPeer service
-  sentrypeer:
-    container_name: sentrypeer
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-#    environment:
-#     - SENTRYPEER_PEER_TO_PEER=1
-    networks:
-     - sentrypeer_local
-    ports:
-#     - "4222:4222/udp"
-     - "5060:5060/tcp"
-     - "5060:5060/udp"
-#     - "127.0.0.1:8082:8082"
-    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
-
-#### Snare / Tanner
-## Tanner Redis Service
-  tanner_redis:
-    container_name: tanner_redis
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## PHP Sandbox service
-  tanner_phpox:
-    container_name: tanner_phpox
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Tanner API Service
-  tanner_api:
-    container_name: tanner_api
-    restart: always
-    depends_on:
-     - tanner_redis
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-    command: tannerapi
-
-## Tanner Service
-  tanner:
-    container_name: tanner
-    restart: always
-    depends_on:
-     - tanner_api
-     - tanner_phpox
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    command: tanner
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
-
-## Snare Service
-  snare:
-    container_name: snare
-    restart: always
-    depends_on:
-     - tanner
-    tty: true
-    networks:
-     - tanner_local
-    ports:
-     - "80:80"
-    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-# Wordpot service
-  wordpot:
-    container_name: wordpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - wordpot_local
-    ports:
-     - "8080:80"
-    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
-
-
-##################
-#### NSM
-##################
-
-# Fatt service
-  fatt:
-    container_name: fatt
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/fatt:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/fatt/log:/opt/fatt/log
-
-# P0f service
-  p0f:
-    container_name: p0f
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/p0f:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/p0f/log:/var/log/p0f
-
-# Suricata service
-  suricata:
-    container_name: suricata
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-    # Loading external Rules from URL
-    # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/suricata:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/suricata/log:/var/log/suricata
-
-
-##################
-#### Tools
-##################
-
-#### ELK
-## Elasticsearch service
-  elasticsearch:
-    container_name: elasticsearch
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - bootstrap.memory_lock=true
-     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
-     - ES_TMPDIR=/tmp
-    networks:
-     - nginx_local
-    cap_add:
-     - IPC_LOCK
-    ulimits:
-      memlock:
-        soft: -1
-        hard: -1
-      nofile:
-        soft: 65536
-        hard: 65536
-    mem_limit: 4g
-    ports:
-     - "127.0.0.1:64298:9200"
-    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Kibana service
-  kibana:
-    container_name: kibana
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    networks:
-     - nginx_local
-    mem_limit: 1g
-    ports:
-     - "127.0.0.1:64296:5601"
-    image: ${TPOT_REPO}/kibana:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-## Logstash service
-  logstash:
-    container_name: logstash
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    networks:
-     - nginx_local
-    environment:
-     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
-     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
-     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
-     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
-    ports:
-      - "127.0.0.1:64305:64305"
-    mem_limit: 2g
-    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Map Redis Service
-  map_redis:
-    container_name: map_redis
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - nginx_local
-    stop_signal: SIGKILL
-    tty: true
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Map Web Service
-  map_web:
-    container_name: map_web
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - nginx_local
-    environment:
-     - MAP_COMMAND=AttackMapServer.py
-    stop_signal: SIGKILL
-    tty: true
-    ports:
-     - "127.0.0.1:64299:64299"
-    image: ${TPOT_REPO}/map:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-## Map Data Service
-  map_data:
-    container_name: map_data
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    networks:
-     - nginx_local
-    environment:
-     - MAP_COMMAND=DataServer_v2.py
-     - TPOT_ATTACKMAP_TEXT=${TPOT_ATTACKMAP_TEXT}
-     - TZ=${TPOT_ATTACKMAP_TEXT_TIMEZONE}
-    stop_signal: SIGKILL
-    tty: true
-    image: ${TPOT_REPO}/map:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-#### /ELK
-
-# Ewsposter service
-  ewsposter:
-    container_name: ewsposter
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ewsposter_local
-    environment:
-     - EWS_HPFEEDS_ENABLE=false
-     - EWS_HPFEEDS_HOST=host
-     - EWS_HPFEEDS_PORT=port
-     - EWS_HPFEEDS_CHANNELS=channels
-     - EWS_HPFEEDS_IDENT=user
-     - EWS_HPFEEDS_SECRET=secret
-     - EWS_HPFEEDS_TLSCERT=false
-     - EWS_HPFEEDS_FORMAT=json
-    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip
-
-# Nginx service
-  nginx:
-    container_name: nginx
-    restart: always
-    environment:
-      - TPOT_OSTYPE=${TPOT_OSTYPE}
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /var/tmp/nginx/client_body
-     - /var/tmp/nginx/proxy
-     - /var/tmp/nginx/fastcgi
-     - /var/tmp/nginx/uwsgi
-     - /var/tmp/nginx/scgi
-     - /run
-     - /var/lib/nginx/tmp:uid=100,gid=82
-    networks:
-     - nginx_local
-    ports:
-     - "64297:64297"
-    image: ${TPOT_REPO}/nginx:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/nginx/cert/:/etc/nginx/cert/:ro
-     - ${TPOT_DATA_PATH}/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
-     - ${TPOT_DATA_PATH}/nginx/log/:/var/log/nginx/
-
-# Spiderfoot service
-  spiderfoot:
-    container_name: spiderfoot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - nginx_local
-    ports:
-     - "127.0.0.1:64303:8080"
-    image: ${TPOT_REPO}/spiderfoot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/spiderfoot:/home/spiderfoot/.spiderfoot

compose/mini.yml

@@ -1,535 +0,0 @@
-# T-Pot: MINI
-version: '3.9'
-
-networks:
-  adbhoney_local:
-  ciscoasa_local:
-  conpot_local_IEC104:
-  conpot_local_guardian_ast:
-  conpot_local_ipmi:
-  conpot_local_kamstrup_382:
-  dicompot_local:
-  honeypots_local:
-  medpot_local:
-  spiderfoot_local:
-  ewsposter_local:
-
-services:
-
-#########################################
-#### DEV
-#########################################
-#### T-Pot Init - Never delete this!
-#########################################
-
-# T-Pot Init Service
-  tpotinit:
-    container_name: tpotinit
-    env_file:
-      - .env
-    restart: always
-    stop_grace_period: 60s
-    tmpfs:
-      - /tmp/etc:uid=2000,gid=2000
-      - /tmp/:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
-      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
-      - ${TPOT_DATA_PATH}:/data
-      - /var/run/docker.sock:/var/run/docker.sock:ro
-
-
-##################
-#### Honeypots
-##################
-
-# Adbhoney service
-  adbhoney:
-    container_name: adbhoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - adbhoney_local
-    ports:
-     - "5555:5555"
-    image: ${TPOT_REPO}/adbhoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/adbhoney/log:/opt/adbhoney/log
-     - ${TPOT_DATA_PATH}/adbhoney/downloads:/opt/adbhoney/dl
-
-# Ciscoasa service
-  ciscoasa:
-    container_name: ciscoasa
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/ciscoasa:uid=2000,gid=2000
-    networks:
-     - ciscoasa_local
-    ports:
-     - "5000:5000/udp"
-     - "8443:8443"
-    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
-
-# Conpot IEC104 service
-  conpot_IEC104:
-    container_name: conpot_iec104
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
-     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
-     - CONPOT_TEMPLATE=IEC104
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_IEC104
-    ports:
-     - "161:161/udp"
-     - "2404:2404"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot guardian_ast service
-  conpot_guardian_ast:
-    container_name: conpot_guardian_ast
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_guardian_ast.json
-     - CONPOT_LOG=/var/log/conpot/conpot_guardian_ast.log
-     - CONPOT_TEMPLATE=guardian_ast
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_guardian_ast
-    ports:
-     - "10001:10001"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot ipmi
-  conpot_ipmi:
-    container_name: conpot_ipmi
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
-     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
-     - CONPOT_TEMPLATE=ipmi
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_ipmi
-    ports:
-     - "623:623/udp"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot kamstrup_382
-  conpot_kamstrup_382:
-    container_name: conpot_kamstrup_382
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
-     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
-     - CONPOT_TEMPLATE=kamstrup_382
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_kamstrup_382
-    ports:
-     - "1025:1025"
-     - "50100:50100"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Dicompot service
-# Get the Horos Client for testing: https://horosproject.org/
-# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
-# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
-  dicompot:
-    container_name: dicompot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dicompot_local
-    ports:
-     - "11112:11112"
-    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
-#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
-
-# Honeypots service
-  honeypots:
-    container_name: honeypots
-    stdin_open: true
-    tty: true
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp:uid=2000,gid=2000
-    networks:
-     - honeypots_local
-    ports:
-     - "21:21"
-     - "22:22"
-     - "23:23"
-     - "25:25"
-     - "53:53/udp"
-     - "80:80"
-     - "110:110"
-     - "123:123"
-     - "143:143"
-     - "161:161"
-     - "389:389"
-     - "443:443"
-     - "445:445"
-     - "631:631"
-     - "1080:1080"
-     - "1433:1433"
-     - "1521:1521"
-     - "3306:3306"
-     - "3389:3389"
-     - "5060:5060/tcp"
-     - "5060:5060/udp"
-     - "5432:5432"
-     - "5900:5900"
-     - "6379:6379"
-     - "6667:6667"
-     - "8080:8080"
-     - "9100:9100"
-     - "9200:9200"
-     - "11211:11211"
-    image: ${TPOT_REPO}/honeypots:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/honeypots/log:/var/log/honeypots
-
-# Honeytrap service
-  honeytrap:
-    container_name: honeytrap
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/honeytrap:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
-     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
-     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
-
-# Medpot service
-  medpot:
-    container_name: medpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - medpot_local
-    ports:
-     - "2575:2575"
-    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
-
-
-##################
-#### NSM
-##################
-
-# Fatt service
-  fatt:
-    container_name: fatt
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/fatt:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/fatt/log:/opt/fatt/log
-
-# P0f service
-  p0f:
-    container_name: p0f
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    image: ${TPOT_REPO}/p0f:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/p0f/log:/var/log/p0f
-
-# Suricata service
-  suricata:
-    container_name: suricata
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-    # Loading external Rules from URL
-    # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/suricata:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/suricata/log:/var/log/suricata
-
-
-##################
-#### Tools 
-##################
-
-#### ELK
-## Elasticsearch service
-  elasticsearch:
-    container_name: elasticsearch
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - bootstrap.memory_lock=true
-     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
-     - ES_TMPDIR=/tmp
-    cap_add:
-     - IPC_LOCK
-    ulimits:
-      memlock:
-        soft: -1
-        hard: -1
-      nofile:
-        soft: 65536
-        hard: 65536
-    mem_limit: 4g
-    ports:
-     - "127.0.0.1:64298:9200"
-    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Kibana service
-  kibana:
-    container_name: kibana
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    mem_limit: 1g
-    ports:
-     - "127.0.0.1:64296:5601"
-    image: ${TPOT_REPO}/kibana:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-## Logstash service
-  logstash:
-    container_name: logstash
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
-     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
-     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
-     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
-    ports:
-     - "127.0.0.1:64305:64305"
-    mem_limit: 2g
-    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Map Redis Service
-  map_redis:
-    container_name: map_redis
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    stop_signal: SIGKILL
-    tty: true
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Map Web Service
-  map_web:
-    container_name: map_web
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - MAP_COMMAND=AttackMapServer.py
-    stop_signal: SIGKILL
-    tty: true
-    ports:
-     - "127.0.0.1:64299:64299"
-    image: ${TPOT_REPO}/map:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-## Map Data Service
-  map_data:
-    container_name: map_data
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - MAP_COMMAND=DataServer_v2.py
-     - TPOT_ATTACKMAP_TEXT=${TPOT_ATTACKMAP_TEXT}
-     - TZ=${TPOT_ATTACKMAP_TEXT_TIMEZONE}
-    stop_signal: SIGKILL
-    tty: true
-    image: ${TPOT_REPO}/map:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-#### /ELK
-
-# Ewsposter service
-  ewsposter:
-    container_name: ewsposter
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ewsposter_local
-    environment:
-     - EWS_HPFEEDS_ENABLE=false
-     - EWS_HPFEEDS_HOST=host
-     - EWS_HPFEEDS_PORT=port
-     - EWS_HPFEEDS_CHANNELS=channels
-     - EWS_HPFEEDS_IDENT=user
-     - EWS_HPFEEDS_SECRET=secret
-     - EWS_HPFEEDS_TLSCERT=false
-     - EWS_HPFEEDS_FORMAT=json
-    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip
-
-# Nginx service
-  nginx:
-    container_name: nginx
-    restart: always
-    environment:
-      - TPOT_OSTYPE=${TPOT_OSTYPE}
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /var/tmp/nginx/client_body
-     - /var/tmp/nginx/proxy
-     - /var/tmp/nginx/fastcgi
-     - /var/tmp/nginx/uwsgi
-     - /var/tmp/nginx/scgi
-     - /run
-     - /var/lib/nginx/tmp:uid=100,gid=82
-    network_mode: "host"
-    ports:
-     - "64297:64297"
-    image: ${TPOT_REPO}/nginx:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/nginx/cert/:/etc/nginx/cert/:ro
-     - ${TPOT_DATA_PATH}/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
-     - ${TPOT_DATA_PATH}/nginx/conf/lswebpasswd:/etc/nginx/lswebpasswd:ro
-     - ${TPOT_DATA_PATH}/nginx/log/:/var/log/nginx/
-
-# Spiderfoot service
-  spiderfoot:
-    container_name: spiderfoot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - spiderfoot_local
-    ports:
-     - "127.0.0.1:64303:8080"
-    image: ${TPOT_REPO}/spiderfoot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/spiderfoot:/home/spiderfoot/.spiderfoot

compose/mobile.yml

@@ -1,628 +0,0 @@
-# T-Pot: MOBILE
-# Note: This docker compose file has been adjusted to limit the number of tools, services and honeypots to run
-#       T-Pot on a Raspberry Pi 4 (8GB of RAM).
-#       The standard docker compose file should work mostly fine (depending on traffic) if you do not enable a
-#       desktop environment such as LXDE and meet the minimum requirements of 8GB RAM.
-version: '3.9'
-
-networks:
-  ciscoasa_local:
-  citrixhoneypot_local:
-  conpot_local_IEC104:
-  conpot_local_ipmi:
-  conpot_local_kamstrup_382:
-  cowrie_local:
-  dicompot_local:
-  dionaea_local:
-  elasticpot_local:
-  heralding_local:
-  ipphoney_local:
-  log4pot_local:
-  mailoney_local:
-  medpot_local:
-  redishoneypot_local:
-  sentrypeer_local:
-  tanner_local:
-  wordpot_local:
-  ewsposter_local:
-
-services:
-
-#########################################
-#### DEV
-#########################################
-#### T-Pot Init - Never delete this!
-#########################################
-
-# T-Pot Init Service
-  tpotinit:
-    container_name: tpotinit
-    env_file:
-      - .env
-    restart: always
-    stop_grace_period: 60s
-    tmpfs:
-      - /tmp/etc:uid=2000,gid=2000
-      - /tmp/:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
-      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
-      - ${TPOT_DATA_PATH}:/data
-      - /var/run/docker.sock:/var/run/docker.sock:ro
-
-##################
-#### Honeypots
-##################
-
-# Ciscoasa service
-  ciscoasa:
-    container_name: ciscoasa
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/ciscoasa:uid=2000,gid=2000
-    networks:
-     - ciscoasa_local
-    ports:
-     - "5000:5000/udp"
-     - "8443:8443"
-    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
-
-# CitrixHoneypot service
-  citrixhoneypot:
-    container_name: citrixhoneypot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - citrixhoneypot_local
-    ports:
-     - "443:443"
-    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
-
-# Conpot IEC104 service
-  conpot_IEC104:
-    container_name: conpot_iec104
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
-     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
-     - CONPOT_TEMPLATE=IEC104
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_IEC104
-    ports:
-     - "161:161/udp"
-     - "2404:2404"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot ipmi
-  conpot_ipmi:
-    container_name: conpot_ipmi
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
-     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
-     - CONPOT_TEMPLATE=ipmi
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_ipmi
-    ports:
-     - "623:623/udp"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot kamstrup_382
-  conpot_kamstrup_382:
-    container_name: conpot_kamstrup_382
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
-     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
-     - CONPOT_TEMPLATE=kamstrup_382
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_kamstrup_382
-    ports:
-     - "1025:1025"
-     - "50100:50100"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Cowrie service
-  cowrie:
-    container_name: cowrie
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tmpfs:
-      - /tmp/cowrie:uid=2000,gid=2000
-      - /tmp/cowrie/data:uid=2000,gid=2000
-    networks:
-      - cowrie_local
-    ports:
-      - "22:22"
-      - "23:23"
-    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
-      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
-      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
-      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
-
-# Dicompot service
-# Get the Horos Client for testing: https://horosproject.org/
-# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
-# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
-  dicompot:
-    container_name: dicompot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - dicompot_local
-    ports:
-     - "11112:11112"
-    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
-#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
-
-# Dionaea service
-  dionaea:
-    container_name: dionaea
-    stdin_open: true
-    tty: true
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - dionaea_local
-    ports:
-     - "20:20"
-     - "21:21"
-     - "42:42"
-     - "69:69/udp"
-     - "81:81"
-     - "135:135"
-     # - "443:443"
-     - "445:445"
-     - "1433:1433"
-     - "1723:1723"
-     - "1883:1883"
-     - "3306:3306"
-     # - "5060:5060"
-     # - "5060:5060/udp"
-     # - "5061:5061"
-     - "27017:27017"
-    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
-     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
-     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
-     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
-     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
-     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
-
-# ElasticPot service
-  elasticpot:
-    container_name: elasticpot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - elasticpot_local
-    ports:
-     - "9200:9200"
-    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
-
-# Heralding service
-  heralding:
-    container_name: heralding
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/heralding:uid=2000,gid=2000
-    networks:
-     - heralding_local
-    ports:
-    # - "21:21"
-    # - "22:22"
-    # - "23:23"
-    # - "25:25"
-    # - "80:80"
-     - "110:110"
-     - "143:143"
-    # - "443:443"
-     - "465:465"
-     - "993:993"
-     - "995:995"
-    # - "3306:3306"
-    # - "3389:3389"
-     - "1080:1080"
-     - "5432:5432"
-     - "5900:5900"
-    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
-
-# Honeytrap service
-  honeytrap:
-    container_name: honeytrap
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/honeytrap:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
-     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
-     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
-
-# Ipphoney service
-  ipphoney:
-    container_name: ipphoney
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - ipphoney_local
-    ports:
-     - "631:631"
-    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
-
-# Mailoney service
-  mailoney:
-    container_name: mailoney
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    environment:
-     - HPFEEDS_SERVER=
-     - HPFEEDS_IDENT=user
-     - HPFEEDS_SECRET=pass
-     - HPFEEDS_PORT=20000
-     - HPFEEDS_CHANNELPREFIX=prefix
-    networks:
-     - mailoney_local
-    ports:
-     - "25:25"
-     - "587:25"
-    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
-
-# Log4pot service
-  log4pot:
-    container_name: log4pot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tmpfs:
-     - /tmp:uid=2000,gid=2000
-    networks:
-     - log4pot_local
-    ports:
-    # - "80:8080"
-    # - "443:8080"
-     - "8080:8080"
-    # - "9200:8080"
-     - "25565:8080"
-    image: ${TPOT_REPO}/log4pot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/log4pot/log:/var/log/log4pot/log
-     - ${TPOT_DATA_PATH}/log4pot/payloads:/var/log/log4pot/payloads
-
-# Medpot service
-  medpot:
-    container_name: medpot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - medpot_local
-    ports:
-     - "2575:2575"
-    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
-
-# Redishoneypot service
-  redishoneypot:
-    container_name: redishoneypot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - redishoneypot_local
-    ports:
-     - "6379:6379"
-    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
-
-# SentryPeer service
-  sentrypeer:
-    container_name: sentrypeer
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-#    environment:
-#     - SENTRYPEER_PEER_TO_PEER=1
-    networks:
-     - sentrypeer_local
-    ports:
-#     - "4222:4222/udp"
-     - "5060:5060/tcp"
-     - "5060:5060/udp"
-#     - "127.0.0.1:8082:8082"
-    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
-
-#### Snare / Tanner
-## Tanner Redis Service
-  tanner_redis:
-    container_name: tanner_redis
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## PHP Sandbox service
-  tanner_phpox:
-    container_name: tanner_phpox
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Tanner API Service
-  tanner_api:
-    container_name: tanner_api
-    restart: always
-    depends_on:
-     - tanner_redis
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-    command: tannerapi
-
-## Tanner Service
-  tanner:
-    container_name: tanner
-    restart: always
-    depends_on:
-     - tanner_api
-     - tanner_phpox
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    command: tanner
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
-
-## Snare Service
-  snare:
-    container_name: snare
-    restart: always
-    depends_on:
-     - tanner
-    tty: true
-    networks:
-     - tanner_local
-    ports:
-     - "80:80"
-    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-# Wordpot service
-  wordpot:
-    container_name: wordpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - wordpot_local
-    ports:
-     - "8080:80"
-    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
-
-
-##################
-#### Tools
-##################
-
-#### ELK
-## Elasticsearch service
-  elasticsearch:
-    container_name: elasticsearch
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - bootstrap.memory_lock=true
-     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
-     - ES_TMPDIR=/tmp
-    cap_add:
-     - IPC_LOCK
-    ulimits:
-      memlock:
-        soft: -1
-        hard: -1
-      nofile:
-        soft: 65536
-        hard: 65536
-    mem_limit: 4g
-    ports:
-     - "127.0.0.1:64298:9200"
-    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Logstash service
-  logstash:
-    container_name: logstash
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
-     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
-     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
-     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
-    ports:
-     - "127.0.0.1:64305:64305"
-    mem_limit: 2g
-    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-#### /ELK
-
-# Ewsposter service
-  ewsposter:
-    container_name: ewsposter
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - ewsposter_local
-    environment:
-     - EWS_HPFEEDS_ENABLE=false
-     - EWS_HPFEEDS_HOST=host
-     - EWS_HPFEEDS_PORT=port
-     - EWS_HPFEEDS_CHANNELS=channels
-     - EWS_HPFEEDS_IDENT=user
-     - EWS_HPFEEDS_SECRET=secret
-     - EWS_HPFEEDS_TLSCERT=false
-     - EWS_HPFEEDS_FORMAT=json
-    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip

compose/raspberry_showcase.yml

@@ -1,628 +0,0 @@
-# T-Pot: MOBILE
-# Note: This docker compose file has been adjusted to limit the number of tools, services and honeypots to run
-#       T-Pot on a Raspberry Pi 4 (8GB of RAM).
-#       The standard docker compose file should work mostly fine (depending on traffic) if you do not enable a
-#       desktop environment such as LXDE and meet the minimum requirements of 8GB RAM.
-version: '3.9'
-
-networks:
-  ciscoasa_local:
-  citrixhoneypot_local:
-  conpot_local_IEC104:
-  conpot_local_ipmi:
-  conpot_local_kamstrup_382:
-  cowrie_local:
-  dicompot_local:
-  dionaea_local:
-  elasticpot_local:
-  heralding_local:
-  ipphoney_local:
-  log4pot_local:
-  mailoney_local:
-  medpot_local:
-  redishoneypot_local:
-  sentrypeer_local:
-  tanner_local:
-  wordpot_local:
-  ewsposter_local:
-
-services:
-
-#########################################
-#### DEV
-#########################################
-#### T-Pot Init - Never delete this!
-#########################################
-
-# T-Pot Init Service
-  tpotinit:
-    container_name: tpotinit
-    env_file:
-      - .env
-    restart: always
-    stop_grace_period: 60s
-    tmpfs:
-      - /tmp/etc:uid=2000,gid=2000
-      - /tmp/:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
-      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
-      - ${TPOT_DATA_PATH}:/data
-      - /var/run/docker.sock:/var/run/docker.sock:ro
-
-##################
-#### Honeypots
-##################
-
-# Ciscoasa service
-  ciscoasa:
-    container_name: ciscoasa
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/ciscoasa:uid=2000,gid=2000
-    networks:
-     - ciscoasa_local
-    ports:
-     - "5000:5000/udp"
-     - "8443:8443"
-    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
-
-# CitrixHoneypot service
-  citrixhoneypot:
-    container_name: citrixhoneypot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - citrixhoneypot_local
-    ports:
-     - "443:443"
-    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
-
-# Conpot IEC104 service
-  conpot_IEC104:
-    container_name: conpot_iec104
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
-     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
-     - CONPOT_TEMPLATE=IEC104
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_IEC104
-    ports:
-     - "161:161/udp"
-     - "2404:2404"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot ipmi
-  conpot_ipmi:
-    container_name: conpot_ipmi
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
-     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
-     - CONPOT_TEMPLATE=ipmi
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_ipmi
-    ports:
-     - "623:623/udp"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot kamstrup_382
-  conpot_kamstrup_382:
-    container_name: conpot_kamstrup_382
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
-     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
-     - CONPOT_TEMPLATE=kamstrup_382
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_kamstrup_382
-    ports:
-     - "1025:1025"
-     - "50100:50100"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Cowrie service
-  cowrie:
-    container_name: cowrie
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tmpfs:
-      - /tmp/cowrie:uid=2000,gid=2000
-      - /tmp/cowrie/data:uid=2000,gid=2000
-    networks:
-      - cowrie_local
-    ports:
-      - "22:22"
-      - "23:23"
-    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
-      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
-      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
-      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
-
-# Dicompot service
-# Get the Horos Client for testing: https://horosproject.org/
-# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
-# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
-  dicompot:
-    container_name: dicompot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - dicompot_local
-    ports:
-     - "11112:11112"
-    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
-#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
-
-# Dionaea service
-  dionaea:
-    container_name: dionaea
-    stdin_open: true
-    tty: true
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - dionaea_local
-    ports:
-     - "20:20"
-     - "21:21"
-     - "42:42"
-     - "69:69/udp"
-     - "81:81"
-     - "135:135"
-     # - "443:443"
-     - "445:445"
-     - "1433:1433"
-     - "1723:1723"
-     - "1883:1883"
-     - "3306:3306"
-     # - "5060:5060"
-     # - "5060:5060/udp"
-     # - "5061:5061"
-     - "27017:27017"
-    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
-     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
-     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
-     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
-     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
-     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
-
-# ElasticPot service
-  elasticpot:
-    container_name: elasticpot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - elasticpot_local
-    ports:
-     - "9200:9200"
-    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
-
-# Heralding service
-  heralding:
-    container_name: heralding
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/heralding:uid=2000,gid=2000
-    networks:
-     - heralding_local
-    ports:
-    # - "21:21"
-    # - "22:22"
-    # - "23:23"
-    # - "25:25"
-    # - "80:80"
-     - "110:110"
-     - "143:143"
-    # - "443:443"
-     - "465:465"
-     - "993:993"
-     - "995:995"
-    # - "3306:3306"
-    # - "3389:3389"
-     - "1080:1080"
-     - "5432:5432"
-     - "5900:5900"
-    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
-
-# Honeytrap service
-  honeytrap:
-    container_name: honeytrap
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/honeytrap:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
-     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
-     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
-
-# Ipphoney service
-  ipphoney:
-    container_name: ipphoney
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - ipphoney_local
-    ports:
-     - "631:631"
-    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
-
-# Mailoney service
-  mailoney:
-    container_name: mailoney
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    environment:
-     - HPFEEDS_SERVER=
-     - HPFEEDS_IDENT=user
-     - HPFEEDS_SECRET=pass
-     - HPFEEDS_PORT=20000
-     - HPFEEDS_CHANNELPREFIX=prefix
-    networks:
-     - mailoney_local
-    ports:
-     - "25:25"
-     - "587:25"
-    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
-
-# Log4pot service
-  log4pot:
-    container_name: log4pot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tmpfs:
-     - /tmp:uid=2000,gid=2000
-    networks:
-     - log4pot_local
-    ports:
-    # - "80:8080"
-    # - "443:8080"
-     - "8080:8080"
-    # - "9200:8080"
-     - "25565:8080"
-    image: ${TPOT_REPO}/log4pot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/log4pot/log:/var/log/log4pot/log
-     - ${TPOT_DATA_PATH}/log4pot/payloads:/var/log/log4pot/payloads
-
-# Medpot service
-  medpot:
-    container_name: medpot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - medpot_local
-    ports:
-     - "2575:2575"
-    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
-
-# Redishoneypot service
-  redishoneypot:
-    container_name: redishoneypot
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - redishoneypot_local
-    ports:
-     - "6379:6379"
-    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
-
-# SentryPeer service
-  sentrypeer:
-    container_name: sentrypeer
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-#    environment:
-#     - SENTRYPEER_PEER_TO_PEER=1
-    networks:
-     - sentrypeer_local
-    ports:
-#     - "4222:4222/udp"
-     - "5060:5060/tcp"
-     - "5060:5060/udp"
-#     - "127.0.0.1:8082:8082"
-    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
-
-#### Snare / Tanner
-## Tanner Redis Service
-  tanner_redis:
-    container_name: tanner_redis
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## PHP Sandbox service
-  tanner_phpox:
-    container_name: tanner_phpox
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Tanner API Service
-  tanner_api:
-    container_name: tanner_api
-    restart: always
-    depends_on:
-     - tanner_redis
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-    command: tannerapi
-
-## Tanner Service
-  tanner:
-    container_name: tanner
-    restart: always
-    depends_on:
-     - tanner_api
-     - tanner_phpox
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    command: tanner
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
-
-## Snare Service
-  snare:
-    container_name: snare
-    restart: always
-    depends_on:
-     - tanner
-    tty: true
-    networks:
-     - tanner_local
-    ports:
-     - "80:80"
-    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-# Wordpot service
-  wordpot:
-    container_name: wordpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - wordpot_local
-    ports:
-     - "82:80"
-    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
-
-
-##################
-#### Tools
-##################
-
-#### ELK
-## Elasticsearch service
-  elasticsearch:
-    container_name: elasticsearch
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - bootstrap.memory_lock=true
-     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
-     - ES_TMPDIR=/tmp
-    cap_add:
-     - IPC_LOCK
-    ulimits:
-      memlock:
-        soft: -1
-        hard: -1
-      nofile:
-        soft: 65536
-        hard: 65536
-    mem_limit: 4g
-    ports:
-     - "127.0.0.1:64298:9200"
-    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Logstash service
-  logstash:
-    container_name: logstash
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
-     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
-     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
-     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
-    ports:
-     - "127.0.0.1:64305:64305"
-    mem_limit: 2g
-    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-#### /ELK
-
-# Ewsposter service
-  ewsposter:
-    container_name: ewsposter
-    restart: always
-    depends_on:
-      logstash:
-        condition: service_healthy
-    networks:
-     - ewsposter_local
-    environment:
-     - EWS_HPFEEDS_ENABLE=false
-     - EWS_HPFEEDS_HOST=host
-     - EWS_HPFEEDS_PORT=port
-     - EWS_HPFEEDS_CHANNELS=channels
-     - EWS_HPFEEDS_IDENT=user
-     - EWS_HPFEEDS_SECRET=secret
-     - EWS_HPFEEDS_TLSCERT=false
-     - EWS_HPFEEDS_FORMAT=json
-    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip

compose/sensor.yml

@@ -1,699 +0,0 @@
-# T-Pot: SENSOR
-version: '3.9'
-
-networks:
-  adbhoney_local:
-  ciscoasa_local:
-  citrixhoneypot_local:
-  conpot_local_IEC104:
-  conpot_local_guardian_ast:
-  conpot_local_ipmi:
-  conpot_local_kamstrup_382:
-  cowrie_local:
-  ddospot_local:
-  dicompot_local:
-  dionaea_local:
-  elasticpot_local:
-  heralding_local:
-  ipphoney_local:
-  mailoney_local:
-  medpot_local:
-  redishoneypot_local:
-  sentrypeer_local:
-  tanner_local:
-  wordpot_local:
-  ewsposter_local:
-
-services:
-
-#########################################
-#### DEV
-#########################################
-#### T-Pot Init - Never delete this!
-#########################################
-
-# T-Pot Init Service
-  tpotinit:
-    container_name: tpotinit
-    env_file:
-      - .env
-    restart: always
-    stop_grace_period: 60s
-    tmpfs:
-      - /tmp/etc:uid=2000,gid=2000
-      - /tmp/:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
-      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
-      - ${TPOT_DATA_PATH}:/data
-      - /var/run/docker.sock:/var/run/docker.sock:ro
-
-##################
-#### Honeypots
-##################
-
-# Adbhoney service
-  adbhoney:
-    container_name: adbhoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - adbhoney_local
-    ports:
-     - "5555:5555"
-    image: ${TPOT_REPO}/adbhoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/adbhoney/log:/opt/adbhoney/log
-     - ${TPOT_DATA_PATH}/adbhoney/downloads:/opt/adbhoney/dl
-
-# Ciscoasa service
-  ciscoasa:
-    container_name: ciscoasa
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/ciscoasa:uid=2000,gid=2000
-    networks:
-     - ciscoasa_local
-    ports:
-     - "5000:5000/udp"
-     - "8443:8443"
-    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
-
-# CitrixHoneypot service
-  citrixhoneypot:
-    container_name: citrixhoneypot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - citrixhoneypot_local
-    ports:
-     - "443:443"
-    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
-
-# Conpot IEC104 service
-  conpot_IEC104:
-    container_name: conpot_iec104
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
-     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
-     - CONPOT_TEMPLATE=IEC104
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_IEC104
-    ports:
-     - "161:161/udp"
-     - "2404:2404"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot guardian_ast service
-  conpot_guardian_ast:
-    container_name: conpot_guardian_ast
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_guardian_ast.json
-     - CONPOT_LOG=/var/log/conpot/conpot_guardian_ast.log
-     - CONPOT_TEMPLATE=guardian_ast
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_guardian_ast
-    ports:
-     - "10001:10001"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot ipmi
-  conpot_ipmi:
-    container_name: conpot_ipmi
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
-     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
-     - CONPOT_TEMPLATE=ipmi
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_ipmi
-    ports:
-     - "623:623/udp"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot kamstrup_382
-  conpot_kamstrup_382:
-    container_name: conpot_kamstrup_382
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
-     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
-     - CONPOT_TEMPLATE=kamstrup_382
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_kamstrup_382
-    ports:
-     - "1025:1025"
-     - "50100:50100"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Cowrie service
-  cowrie:
-    container_name: cowrie
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-      - /tmp/cowrie:uid=2000,gid=2000
-      - /tmp/cowrie/data:uid=2000,gid=2000
-    networks:
-      - cowrie_local
-    ports:
-      - "22:22"
-      - "23:23"
-    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION} 
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
-      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
-      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
-      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
-
-# Ddospot service
-  ddospot:
-    container_name: ddospot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ddospot_local
-    ports:
-     - "19:19/udp"
-     - "53:53/udp"
-     - "123:123/udp"
-#     - "161:161/udp"
-     - "1900:1900/udp"
-    image: ${TPOT_REPO}/ddospot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ddospot/log:/opt/ddospot/ddospot/logs
-     - ${TPOT_DATA_PATH}/ddospot/bl:/opt/ddospot/ddospot/bl
-     - ${TPOT_DATA_PATH}/ddospot/db:/opt/ddospot/ddospot/db
-
-# Dicompot service
-# Get the Horos Client for testing: https://horosproject.org/
-# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
-# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
-  dicompot:
-    container_name: dicompot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dicompot_local
-    ports:
-     - "11112:11112"
-    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
-#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
-
-# Dionaea service
-  dionaea:
-    container_name: dionaea
-    stdin_open: true
-    tty: true
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dionaea_local
-    ports:
-     - "20:20"
-     - "21:21"
-     - "42:42"
-     - "69:69/udp"
-     - "81:81"
-     - "135:135"
-     # - "443:443"
-     - "445:445"
-     - "1433:1433"
-     - "1723:1723"
-     - "1883:1883"
-     - "3306:3306"
-     # - "5060:5060"
-     # - "5060:5060/udp"
-     # - "5061:5061"
-     - "27017:27017"
-    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
-     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
-     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
-     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
-     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
-     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
-
-# ElasticPot service
-  elasticpot:
-    container_name: elasticpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - elasticpot_local
-    ports:
-     - "9200:9200"
-    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
-
-# Heralding service
-  heralding:
-    container_name: heralding
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/heralding:uid=2000,gid=2000
-    networks:
-     - heralding_local
-    ports:
-    # - "21:21"
-    # - "22:22"
-    # - "23:23"
-    # - "25:25"
-    # - "80:80"
-     - "110:110"
-     - "143:143"
-    # - "443:443"
-     - "465:465"
-     - "993:993"
-     - "995:995"
-    # - "3306:3306"
-    # - "3389:3389"
-     - "1080:1080"
-     - "5432:5432"
-     - "5900:5900"
-    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
-
-# Honeytrap service
-  honeytrap:
-    container_name: honeytrap
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/honeytrap:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
-     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
-     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
-
-# Ipphoney service
-  ipphoney:
-    container_name: ipphoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ipphoney_local
-    ports:
-     - "631:631"
-    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
-
-# Mailoney service
-  mailoney:
-    container_name: mailoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - HPFEEDS_SERVER=
-     - HPFEEDS_IDENT=user
-     - HPFEEDS_SECRET=pass
-     - HPFEEDS_PORT=20000
-     - HPFEEDS_CHANNELPREFIX=prefix
-    networks:
-     - mailoney_local
-    ports:
-     - "25:25"
-     - "587:25"
-    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
-
-# Medpot service
-  medpot:
-    container_name: medpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - medpot_local
-    ports:
-     - "2575:2575"
-    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
-
-# Redishoneypot service
-  redishoneypot:
-    container_name: redishoneypot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - redishoneypot_local
-    ports:
-     - "6379:6379"
-    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
-
-# SentryPeer service
-  sentrypeer:
-    container_name: sentrypeer
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-#    environment:
-#     - SENTRYPEER_PEER_TO_PEER=1
-    networks:
-     - sentrypeer_local
-    ports:
-#     - "4222:4222/udp"
-     - "5060:5060/tcp"
-     - "5060:5060/udp"
-#     - "127.0.0.1:8082:8082"
-    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
-
-#### Snare / Tanner
-## Tanner Redis Service
-  tanner_redis:
-    container_name: tanner_redis
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## PHP Sandbox service
-  tanner_phpox:
-    container_name: tanner_phpox
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Tanner API Service
-  tanner_api:
-    container_name: tanner_api
-    restart: always
-    depends_on:
-     - tanner_redis
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-    command: tannerapi
-
-## Tanner Service
-  tanner:
-    container_name: tanner
-    restart: always
-    depends_on:
-     - tanner_api
-     - tanner_phpox
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    command: tanner
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
-
-## Snare Service
-  snare:
-    container_name: snare
-    restart: always
-    depends_on:
-     - tanner
-    tty: true
-    networks:
-     - tanner_local
-    ports:
-     - "80:80"
-    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-# Wordpot service
-  wordpot:
-    container_name: wordpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - wordpot_local
-    ports:
-     - "8080:80"
-    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
-
-
-##################
-#### NSM
-##################
-
-# Fatt service
-  fatt:
-    container_name: fatt
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/fatt:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/fatt/log:/opt/fatt/log
-
-# P0f service
-  p0f:
-    container_name: p0f
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    image: ${TPOT_REPO}/p0f:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/p0f/log:/var/log/p0f
-
-# Suricata service
-  suricata:
-    container_name: suricata
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-    # Loading external Rules from URL
-    # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/suricata:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/suricata/log:/var/log/suricata
-
-
-##################
-#### Tools 
-##################
-
-#### ELK
-
-## Logstash service
-  logstash:
-    container_name: logstash
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
-     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
-     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
-     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
-    ports:
-     - "127.0.0.1:64305:64305"
-    mem_limit: 2g
-    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-#### /ELK
-
-# Ewsposter service
-  ewsposter:
-    container_name: ewsposter
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ewsposter_local
-    environment:
-     - EWS_HPFEEDS_ENABLE=false
-     - EWS_HPFEEDS_HOST=host
-     - EWS_HPFEEDS_PORT=port
-     - EWS_HPFEEDS_CHANNELS=channels
-     - EWS_HPFEEDS_IDENT=user
-     - EWS_HPFEEDS_SECRET=secret
-     - EWS_HPFEEDS_TLSCERT=false
-     - EWS_HPFEEDS_FORMAT=json
-    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip

compose/standard.yml

@@ -1,830 +0,0 @@
-# T-Pot: STANDARD
-version: '3.9'
-
-networks:
-  adbhoney_local:
-  ciscoasa_local:
-  citrixhoneypot_local:
-  conpot_local_IEC104:
-  conpot_local_guardian_ast:
-  conpot_local_ipmi:
-  conpot_local_kamstrup_382:
-  cowrie_local:
-  ddospot_local:
-  dicompot_local:
-  dionaea_local:
-  elasticpot_local:
-  heralding_local:
-  ipphoney_local:
-  mailoney_local:
-  medpot_local:
-  redishoneypot_local:
-  sentrypeer_local:
-  tanner_local:
-  spiderfoot_local:
-  wordpot_local:
-  ewsposter_local:
-
-services:
-
-#########################################
-#### DEV
-#########################################
-#### T-Pot Init - Never delete this!
-#########################################
-
-# T-Pot Init Service
-  tpotinit:
-    container_name: tpotinit
-    env_file:
-      - .env
-    restart: always
-    stop_grace_period: 60s
-    tmpfs:
-      - /tmp/etc:uid=2000,gid=2000
-      - /tmp/:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
-      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
-      - ${TPOT_DATA_PATH}:/data
-      - /var/run/docker.sock:/var/run/docker.sock:ro
-
-
-##################
-#### Honeypots
-##################
-
-# Adbhoney service
-  adbhoney:
-    container_name: adbhoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - adbhoney_local
-    ports:
-     - "5555:5555"
-    image: ${TPOT_REPO}/adbhoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/adbhoney/log:/opt/adbhoney/log
-     - ${TPOT_DATA_PATH}/adbhoney/downloads:/opt/adbhoney/dl
-
-# Ciscoasa service
-  ciscoasa:
-    container_name: ciscoasa
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/ciscoasa:uid=2000,gid=2000
-    networks:
-     - ciscoasa_local
-    ports:
-     - "5000:5000/udp"
-     - "8443:8443"
-    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
-
-# CitrixHoneypot service
-  citrixhoneypot:
-    container_name: citrixhoneypot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - citrixhoneypot_local
-    ports:
-     - "443:443"
-    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
-
-# Conpot IEC104 service
-  conpot_IEC104:
-    container_name: conpot_iec104
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
-     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
-     - CONPOT_TEMPLATE=IEC104
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_IEC104
-    ports:
-     - "161:161/udp"
-     - "2404:2404"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot guardian_ast service
-  conpot_guardian_ast:
-    container_name: conpot_guardian_ast
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_guardian_ast.json
-     - CONPOT_LOG=/var/log/conpot/conpot_guardian_ast.log
-     - CONPOT_TEMPLATE=guardian_ast
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_guardian_ast
-    ports:
-     - "10001:10001"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot ipmi
-  conpot_ipmi:
-    container_name: conpot_ipmi
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
-     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
-     - CONPOT_TEMPLATE=ipmi
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_ipmi
-    ports:
-     - "623:623/udp"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot kamstrup_382
-  conpot_kamstrup_382:
-    container_name: conpot_kamstrup_382
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
-     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
-     - CONPOT_TEMPLATE=kamstrup_382
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_kamstrup_382
-    ports:
-     - "1025:1025"
-     - "50100:50100"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Cowrie service
-  cowrie:
-    container_name: cowrie
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-      - /tmp/cowrie:uid=2000,gid=2000
-      - /tmp/cowrie/data:uid=2000,gid=2000
-    networks:
-      - cowrie_local
-    ports:
-      - "22:22"
-      - "23:23"
-    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION} 
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
-      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
-      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
-      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
-
-# Ddospot service
-  ddospot:
-    container_name: ddospot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ddospot_local
-    ports:
-     - "19:19/udp"
-     - "53:53/udp"
-     - "123:123/udp"
-#     - "161:161/udp"
-     - "1900:1900/udp"
-    image: ${TPOT_REPO}/ddospot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ddospot/log:/opt/ddospot/ddospot/logs
-     - ${TPOT_DATA_PATH}/ddospot/bl:/opt/ddospot/ddospot/bl
-     - ${TPOT_DATA_PATH}/ddospot/db:/opt/ddospot/ddospot/db
-
-# Dicompot service
-# Get the Horos Client for testing: https://horosproject.org/
-# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
-# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
-  dicompot:
-    container_name: dicompot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dicompot_local
-    ports:
-     - "11112:11112"
-    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
-#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
-
-# Dionaea service
-  dionaea:
-    container_name: dionaea
-    stdin_open: true
-    tty: true
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dionaea_local
-    ports:
-     - "20:20"
-     - "21:21"
-     - "42:42"
-     - "69:69/udp"
-     - "81:81"
-     - "135:135"
-     # - "443:443"
-     - "445:445"
-     - "1433:1433"
-     - "1723:1723"
-     - "1883:1883"
-     - "3306:3306"
-     # - "5060:5060"
-     # - "5060:5060/udp"
-     # - "5061:5061"
-     - "27017:27017"
-    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
-     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
-     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
-     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
-     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
-     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
-
-# ElasticPot service
-  elasticpot:
-    container_name: elasticpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - elasticpot_local
-    ports:
-     - "9200:9200"
-    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
-
-# Heralding service
-  heralding:
-    container_name: heralding
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/heralding:uid=2000,gid=2000
-    networks:
-     - heralding_local
-    ports:
-    # - "21:21"
-    # - "22:22"
-    # - "23:23"
-    # - "25:25"
-    # - "80:80"
-     - "110:110"
-     - "143:143"
-    # - "443:443"
-     - "465:465"
-     - "993:993"
-     - "995:995"
-    # - "3306:3306"
-    # - "3389:3389"
-     - "1080:1080"
-     - "5432:5432"
-     - "5900:5900"
-    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
-
-# Honeytrap service
-  honeytrap:
-    container_name: honeytrap
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/honeytrap:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
-     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
-     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
-
-# Ipphoney service
-  ipphoney:
-    container_name: ipphoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ipphoney_local
-    ports:
-     - "631:631"
-    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
-
-# Mailoney service
-  mailoney:
-    container_name: mailoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - HPFEEDS_SERVER=
-     - HPFEEDS_IDENT=user
-     - HPFEEDS_SECRET=pass
-     - HPFEEDS_PORT=20000
-     - HPFEEDS_CHANNELPREFIX=prefix
-    networks:
-     - mailoney_local
-    ports:
-     - "25:25"
-     - "587:25"
-    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
-
-# Medpot service
-  medpot:
-    container_name: medpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - medpot_local
-    ports:
-     - "2575:2575"
-    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
-
-# Redishoneypot service
-  redishoneypot:
-    container_name: redishoneypot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - redishoneypot_local
-    ports:
-     - "6379:6379"
-    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
-
-# SentryPeer service
-  sentrypeer:
-    container_name: sentrypeer
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-#    environment:
-#     - SENTRYPEER_PEER_TO_PEER=1
-    networks:
-     - sentrypeer_local
-    ports:
-#     - "4222:4222/udp"
-     - "5060:5060/tcp"
-     - "5060:5060/udp"
-#     - "127.0.0.1:8082:8082"
-    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
-
-#### Snare / Tanner
-## Tanner Redis Service
-  tanner_redis:
-    container_name: tanner_redis
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## PHP Sandbox service
-  tanner_phpox:
-    container_name: tanner_phpox
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Tanner API Service
-  tanner_api:
-    container_name: tanner_api
-    restart: always
-    depends_on:
-     - tanner_redis
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-    command: tannerapi
-
-## Tanner Service
-  tanner:
-    container_name: tanner
-    restart: always
-    depends_on:
-     - tanner_api
-     - tanner_phpox
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    command: tanner
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
-
-## Snare Service
-  snare:
-    container_name: snare
-    restart: always
-    depends_on:
-     - tanner
-    tty: true
-    networks:
-     - tanner_local
-    ports:
-     - "80:80"
-    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-# Wordpot service
-  wordpot:
-    container_name: wordpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - wordpot_local
-    ports:
-     - "8080:80"
-    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
-
-
-##################
-#### NSM
-##################
-
-# Fatt service
-  fatt:
-    container_name: fatt
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/fatt:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/fatt/log:/opt/fatt/log
-
-# P0f service
-  p0f:
-    container_name: p0f
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    image: ${TPOT_REPO}/p0f:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/p0f/log:/var/log/p0f
-
-# Suricata service
-  suricata:
-    container_name: suricata
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-    # Loading external Rules from URL
-    # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/suricata:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/suricata/log:/var/log/suricata
-
-
-##################
-#### Tools 
-##################
-
-#### ELK
-## Elasticsearch service
-  elasticsearch:
-    container_name: elasticsearch
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - bootstrap.memory_lock=true
-     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
-     - ES_TMPDIR=/tmp
-    cap_add:
-     - IPC_LOCK
-    ulimits:
-      memlock:
-        soft: -1
-        hard: -1
-      nofile:
-        soft: 65536
-        hard: 65536
-    mem_limit: 4g
-    ports:
-     - "127.0.0.1:64298:9200"
-    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Kibana service
-  kibana:
-    container_name: kibana
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    mem_limit: 1g
-    ports:
-     - "127.0.0.1:64296:5601"
-    image: ${TPOT_REPO}/kibana:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-## Logstash service
-  logstash:
-    container_name: logstash
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
-     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
-     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
-     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
-    ports:
-     - "127.0.0.1:64305:64305"
-    mem_limit: 2g
-    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Map Redis Service
-  map_redis:
-    container_name: map_redis
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    stop_signal: SIGKILL
-    tty: true
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Map Web Service
-  map_web:
-    container_name: map_web
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - MAP_COMMAND=AttackMapServer.py
-    stop_signal: SIGKILL
-    tty: true
-    ports:
-     - "127.0.0.1:64299:64299"
-    image: ${TPOT_REPO}/map:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-## Map Data Service
-  map_data:
-    container_name: map_data
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - MAP_COMMAND=DataServer_v2.py
-     - TPOT_ATTACKMAP_TEXT=${TPOT_ATTACKMAP_TEXT}
-     - TZ=${TPOT_ATTACKMAP_TEXT_TIMEZONE}
-    stop_signal: SIGKILL
-    tty: true
-    image: ${TPOT_REPO}/map:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-#### /ELK
-
-# Ewsposter service
-  ewsposter:
-    container_name: ewsposter
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ewsposter_local
-    environment:
-     - EWS_HPFEEDS_ENABLE=false
-     - EWS_HPFEEDS_HOST=host
-     - EWS_HPFEEDS_PORT=port
-     - EWS_HPFEEDS_CHANNELS=channels
-     - EWS_HPFEEDS_IDENT=user
-     - EWS_HPFEEDS_SECRET=secret
-     - EWS_HPFEEDS_TLSCERT=false
-     - EWS_HPFEEDS_FORMAT=json
-    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip
-
-# Nginx service
-  nginx:
-    container_name: nginx
-    restart: always
-    environment:
-      - TPOT_OSTYPE=${TPOT_OSTYPE}
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /var/tmp/nginx/client_body
-     - /var/tmp/nginx/proxy
-     - /var/tmp/nginx/fastcgi
-     - /var/tmp/nginx/uwsgi
-     - /var/tmp/nginx/scgi
-     - /run
-     - /var/lib/nginx/tmp:uid=100,gid=82
-    network_mode: "host"
-    ports:
-     - "64297:64297"
-    image: ${TPOT_REPO}/nginx:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/nginx/cert/:/etc/nginx/cert/:ro
-     - ${TPOT_DATA_PATH}/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
-     - ${TPOT_DATA_PATH}/nginx/conf/lswebpasswd:/etc/nginx/lswebpasswd:ro
-     - ${TPOT_DATA_PATH}/nginx/log/:/var/log/nginx/
-
-# Spiderfoot service
-  spiderfoot:
-    container_name: spiderfoot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - spiderfoot_local
-    ports:
-     - "127.0.0.1:64303:8080"
-    image: ${TPOT_REPO}/spiderfoot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/spiderfoot:/home/spiderfoot/.spiderfoot

compose/tpot_services.yml

@@ -1,961 +0,0 @@
-# T-Pot: Docker Services Base Configuration
-#        This is only to be used with the T-Pot Customizer
-#        Editing the contents may result in broken custom configurations!
-
-networks:
-  adbhoney_local:
-  ciscoasa_local:
-  citrixhoneypot_local:
-  conpot_local_IEC104:
-  conpot_local_guardian_ast:
-  conpot_local_ipmi:
-  conpot_local_kamstrup_382:
-  cowrie_local:
-  ddospot_local:
-  dicompot_local:
-  dionaea_local:
-  elasticpot_local:
-  endlessh_local:
-  hellpot_local:
-  heralding_local:
-  honeypots_local:
-  ipphoney_local:
-  log4pot_local:
-  mailoney_local:
-  medpot_local:
-  redishoneypot_local:
-  sentrypeer_local:
-  tanner_local:
-  wordpot_local:
-  spiderfoot_local:
-  ewsposter_local:
-
-services:
-
-#########################################
-#### DEV
-#########################################
-#### T-Pot Init - Never delete this!
-#########################################
-
-# T-Pot Init Service
-  tpotinit:
-    container_name: tpotinit
-    env_file:
-      - .env
-    restart: always
-    stop_grace_period: 60s
-    tmpfs:
-      - /tmp/etc:uid=2000,gid=2000
-      - /tmp/:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
-      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
-      - ${TPOT_DATA_PATH}:/data
-      - /var/run/docker.sock:/var/run/docker.sock:ro
-
-##################
-#### Honeypots
-##################
-
-# Adbhoney service
-  adbhoney:
-    container_name: adbhoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - adbhoney_local
-    ports:
-     - "5555:5555"
-    image: ${TPOT_REPO}/adbhoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/adbhoney/log:/opt/adbhoney/log
-     - ${TPOT_DATA_PATH}/adbhoney/downloads:/opt/adbhoney/dl
-
-# Ciscoasa service
-  ciscoasa:
-    container_name: ciscoasa
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/ciscoasa:uid=2000,gid=2000
-    networks:
-     - ciscoasa_local
-    ports:
-     - "5000:5000/udp"
-     - "8443:8443"
-    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
-
-# CitrixHoneypot service
-  citrixhoneypot:
-    container_name: citrixhoneypot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - citrixhoneypot_local
-    ports:
-     - "443:443"
-    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
-
-# Conpot IEC104 service
-  conpot_IEC104:
-    container_name: conpot_iec104
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
-     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
-     - CONPOT_TEMPLATE=IEC104
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_IEC104
-    ports:
-     - "161:161/udp"
-     - "2404:2404"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot guardian_ast service
-  conpot_guardian_ast:
-    container_name: conpot_guardian_ast
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_guardian_ast.json
-     - CONPOT_LOG=/var/log/conpot/conpot_guardian_ast.log
-     - CONPOT_TEMPLATE=guardian_ast
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_guardian_ast
-    ports:
-     - "10001:10001"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot ipmi
-  conpot_ipmi:
-    container_name: conpot_ipmi
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
-     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
-     - CONPOT_TEMPLATE=ipmi
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_ipmi
-    ports:
-     - "623:623/udp"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot kamstrup_382
-  conpot_kamstrup_382:
-    container_name: conpot_kamstrup_382
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
-     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
-     - CONPOT_TEMPLATE=kamstrup_382
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_kamstrup_382
-    ports:
-     - "1025:1025"
-     - "50100:50100"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Cowrie service
-  cowrie:
-    container_name: cowrie
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-      - /tmp/cowrie:uid=2000,gid=2000
-      - /tmp/cowrie/data:uid=2000,gid=2000
-    networks:
-      - cowrie_local
-    ports:
-      - "22:22"
-      - "23:23"
-    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
-      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
-      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
-      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
-
-# Ddospot service
-  ddospot:
-    container_name: ddospot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ddospot_local
-    ports:
-     - "19:19/udp"
-     - "53:53/udp"
-     - "123:123/udp"
-#     - "161:161/udp"
-     - "1900:1900/udp"
-    image: ${TPOT_REPO}/ddospot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ddospot/log:/opt/ddospot/ddospot/logs
-     - ${TPOT_DATA_PATH}/ddospot/bl:/opt/ddospot/ddospot/bl
-     - ${TPOT_DATA_PATH}/ddospot/db:/opt/ddospot/ddospot/db
-
-# Dicompot service
-# Get the Horos Client for testing: https://horosproject.org/
-# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
-# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
-  dicompot:
-    container_name: dicompot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dicompot_local
-    ports:
-     - "11112:11112"
-    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
-#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
-
-# Dionaea service
-  dionaea:
-    container_name: dionaea
-    stdin_open: true
-    tty: true
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dionaea_local
-    ports:
-     - "20:20"
-     - "21:21"
-     - "42:42"
-     - "69:69/udp"
-     - "81:81"
-     - "135:135"
-     # - "443:443"
-     - "445:445"
-     - "1433:1433"
-     - "1723:1723"
-     - "1883:1883"
-     - "3306:3306"
-     # - "5060:5060"
-     # - "5060:5060/udp"
-     # - "5061:5061"
-     - "27017:27017"
-    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
-     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
-     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
-     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
-     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
-     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
-
-# ElasticPot service
-  elasticpot:
-    container_name: elasticpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - elasticpot_local
-    ports:
-     - "9200:9200"
-    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
-
-# Endlessh service
-  endlessh:
-    container_name: endlessh
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - endlessh_local
-    ports:
-     - "22:2222"
-    image: ${TPOT_REPO}/endlessh:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/endlessh/log:/var/log/endlessh
-
-# # Glutton service
-  # glutton:
-    # container_name: glutton
-    # restart: always
-    # depends_on:
-      # tpotinit:
-        # condition: service_healthy
-    # tmpfs:
-     # - /var/lib/glutton:uid=2000,gid=2000
-     # - /run:uid=2000,gid=2000
-    # network_mode: "host"
-    # cap_add:
-     # - NET_ADMIN
-    # image: ${TPOT_REPO}/glutton:${TPOT_VERSION}
-    # pull_policy: ${TPOT_PULL_POLICY}
-    # read_only: true
-    # volumes:
-     # - ${TPOT_DATA_PATH}/glutton/log:/var/log/glutton
-     # - ${TPOT_DATA_PATH}/glutton/payloads:/opt/glutton/payloads
-
-# Hellpot service
-  hellpot:
-    container_name: hellpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - hellpot_local
-    ports:
-     - "80:8080"
-    image: ${TPOT_REPO}/hellpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/hellpot/log:/var/log/hellpot
-
-# Heralding service
-  heralding:
-    container_name: heralding
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/heralding:uid=2000,gid=2000
-    networks:
-     - heralding_local
-    ports:
-    # - "21:21"
-    # - "22:22"
-    # - "23:23"
-    # - "25:25"
-    # - "80:80"
-     - "110:110"
-     - "143:143"
-    # - "443:443"
-     - "465:465"
-     - "993:993"
-     - "995:995"
-    # - "3306:3306"
-    # - "3389:3389"
-     - "1080:1080"
-     - "5432:5432"
-     - "5900:5900"
-    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
-
-# Honeypots service
-  honeypots:
-    container_name: honeypots
-    stdin_open: true
-    tty: true
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp:uid=2000,gid=2000
-    networks:
-     - honeypots_local
-    ports:
-     - "21:21"
-     - "22:22"
-     - "23:23"
-     - "25:25"
-     - "53:53/udp"
-     - "80:80"
-     - "110:110"
-     - "123:123"
-     - "143:143"
-     - "161:161"
-     - "389:389"
-     - "443:443"
-     - "445:445"
-     - "631:631"
-     - "1080:1080"
-     - "1433:1433"
-     - "1521:1521"
-     - "3306:3306"
-     - "3389:3389"
-     - "5060:5060"
-     - "5432:5432"
-     - "5900:5900"
-     - "6379:6379"
-     - "6667:6667"
-     - "8080:8080"
-     - "9100:9100"
-     - "9200:9200"
-     - "11211:11211"
-    image: ${TPOT_REPO}/honeypots:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/honeypots/log:/var/log/honeypots
-
-# Honeytrap service
-  honeytrap:
-    container_name: honeytrap
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/honeytrap:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
-     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
-     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
-
-# Ipphoney service
-  ipphoney:
-    container_name: ipphoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ipphoney_local
-    ports:
-     - "631:631"
-    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
-
-# Log4pot service
-  log4pot:
-    container_name: log4pot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp:uid=2000,gid=2000
-    networks:
-     - log4pot_local
-    ports:
-     - "80:8080"
-     - "443:8080"
-     - "8080:8080"
-     - "9200:8080"
-     - "25565:8080"
-    image: ${TPOT_REPO}/log4pot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/log4pot/log:/var/log/log4pot/log
-     - ${TPOT_DATA_PATH}/log4pot/payloads:/var/log/log4pot/payloads
-
-# Mailoney service
-  mailoney:
-    container_name: mailoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - HPFEEDS_SERVER=
-     - HPFEEDS_IDENT=user
-     - HPFEEDS_SECRET=pass
-     - HPFEEDS_PORT=20000
-     - HPFEEDS_CHANNELPREFIX=prefix
-    networks:
-     - mailoney_local
-    ports:
-     - "25:25"
-     - "587:25"
-    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
-
-# Medpot service
-  medpot:
-    container_name: medpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - medpot_local
-    ports:
-     - "2575:2575"
-    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
-
-# Redishoneypot service
-  redishoneypot:
-    container_name: redishoneypot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - redishoneypot_local
-    ports:
-     - "6379:6379"
-    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
-
-# SentryPeer service
-  sentrypeer:
-    container_name: sentrypeer
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-#    environment:
-#     - SENTRYPEER_PEER_TO_PEER=1
-    networks:
-     - sentrypeer_local
-    ports:
-#     - "4222:4222/udp"
-     - "5060:5060/tcp"
-     - "5060:5060/udp"
-#     - "127.0.0.1:8082:8082"
-    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
-
-#### Snare / Tanner
-## Tanner Redis Service
-  tanner_redis:
-    container_name: tanner_redis
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## PHP Sandbox service
-  tanner_phpox:
-    container_name: tanner_phpox
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Tanner API service
-  tanner_api:
-    container_name: tanner_api
-    restart: always
-    depends_on:
-     - tanner_redis
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-    command: tannerapi
-
-## Tanner service
-  tanner:
-    container_name: tanner
-    restart: always
-    depends_on:
-     - tanner_api
-     - tanner_phpox
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    command: tanner
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
-
-## Snare service
-  snare:
-    container_name: snare
-    restart: always
-    depends_on:
-     - tanner
-    tty: true
-    networks:
-     - tanner_local
-    ports:
-     - "80:80"
-    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-# Wordpot service
-  wordpot:
-    container_name: wordpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - wordpot_local
-    ports:
-     - "80:80"
-    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
-
-
-##################
-#### NSM
-##################
-
-# Fatt service
-  fatt:
-    container_name: fatt
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/fatt:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/fatt/log:/opt/fatt/log
-
-# P0f service
-  p0f:
-    container_name: p0f
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    image: ${TPOT_REPO}/p0f:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/p0f/log:/var/log/p0f
-
-# Suricata service
-  suricata:
-    container_name: suricata
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-    # Loading external Rules from URL
-    # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/suricata:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/suricata/log:/var/log/suricata
-
-
-##################
-#### Tools
-##################
-
-#### ELK
-## Elasticsearch service
-  elasticsearch:
-    container_name: elasticsearch
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - bootstrap.memory_lock=true
-     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
-     - ES_TMPDIR=/tmp
-    cap_add:
-     - IPC_LOCK
-    ulimits:
-      memlock:
-        soft: -1
-        hard: -1
-      nofile:
-        soft: 65536
-        hard: 65536
-    mem_limit: 4g
-    ports:
-     - "127.0.0.1:64298:9200"
-    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Kibana service
-  kibana:
-    container_name: kibana
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    mem_limit: 1g
-    ports:
-     - "127.0.0.1:64296:5601"
-    image: ${TPOT_REPO}/kibana:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-## Logstash service
-  logstash:
-    container_name: logstash
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
-     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
-     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
-     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
-    ports:
-     - "127.0.0.1:64305:64305"
-    mem_limit: 2g
-    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Map Redis Service
-  map_redis:
-    container_name: map_redis
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    stop_signal: SIGKILL
-    tty: true
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Map Web Service
-  map_web:
-    container_name: map_web
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - MAP_COMMAND=AttackMapServer.py
-    stop_signal: SIGKILL
-    tty: true
-    ports:
-     - "127.0.0.1:64299:64299"
-    image: ${TPOT_REPO}/map:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-## Map Data Service
-  map_data:
-    container_name: map_data
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - MAP_COMMAND=DataServer_v2.py
-     - TPOT_ATTACKMAP_TEXT=${TPOT_ATTACKMAP_TEXT}
-     - TZ=${TPOT_ATTACKMAP_TEXT_TIMEZONE}
-    stop_signal: SIGKILL
-    tty: true
-    image: ${TPOT_REPO}/map:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-#### /ELK
-
-# Ewsposter service
-  ewsposter:
-    container_name: ewsposter
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ewsposter_local
-    environment:
-     - EWS_HPFEEDS_ENABLE=false
-     - EWS_HPFEEDS_HOST=host
-     - EWS_HPFEEDS_PORT=port
-     - EWS_HPFEEDS_CHANNELS=channels
-     - EWS_HPFEEDS_IDENT=user
-     - EWS_HPFEEDS_SECRET=secret
-     - EWS_HPFEEDS_TLSCERT=false
-     - EWS_HPFEEDS_FORMAT=json
-    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip
-
-# Nginx service
-  nginx:
-    container_name: nginx
-    restart: always
-    environment:
-     - TPOT_OSTYPE=${TPOT_OSTYPE}
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /var/tmp/nginx/client_body
-     - /var/tmp/nginx/proxy
-     - /var/tmp/nginx/fastcgi
-     - /var/tmp/nginx/uwsgi
-     - /var/tmp/nginx/scgi
-     - /run
-     - /var/lib/nginx/tmp:uid=100,gid=82
-    network_mode: "host"
-    ports:
-     - "64297:64297"
-    image: ${TPOT_REPO}/nginx:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/nginx/cert/:/etc/nginx/cert/:ro
-     - ${TPOT_DATA_PATH}/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
-     - ${TPOT_DATA_PATH}/nginx/conf/lswebpasswd:/etc/nginx/lswebpasswd:ro
-     - ${TPOT_DATA_PATH}/nginx/log/:/var/log/nginx/
-
-# Spiderfoot service
-  spiderfoot:
-    container_name: spiderfoot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - spiderfoot_local
-    ports:
-     - "127.0.0.1:64303:8080"
-    image: ${TPOT_REPO}/spiderfoot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/spiderfoot:/home/spiderfoot/.spiderfoot

deploy.sh

@@ -1,153 +0,0 @@
-#!/usr/bin/env bash
-
-myANSIBLE_PORT=64295
-myANSIBLE_TPOT_PLAYBOOK="installer/install/deploy.yml"
-myADJECTIVE=$(shuf -n1 installer/install/a.txt)
-myNOUN=$(shuf -n1 installer/install/n.txt)
-myENV_FILE="$HOME/tpotce/.env"
-
-myDEPLOY=$(cat << "EOF"
-
- ____   [ T-Pot ]                  ____             _
-/ ___|  ___ _ __  ___  ___  _ __  |  _ \  ___ _ __ | | ___  _   _
-\___ \ / _ \  _ \/ __|/ _ \|  __| | | | |/ _ \  _ \| |/ _ \| | | |
- ___) |  __/ | | \__ \ (_) | |    | |_| |  __/ |_) | | (_) | |_| |
-|____/ \___|_| |_|___/\___/|_|    |____/ \___| .__/|_|\___/ \__, |
-                                             |_|            |___/
-
-EOF
-)
-
-# Check if the script is running in a HIVE installation
-if ! grep -q 'TPOT_TYPE=HIVE' "$HOME/tpotce/.env";
-  then
-    echo "# This script is only supported on HIVE installations."
-    echo
-    exit 1
-fi
-
-# Check if running on a supported distribution
-mySUPPORTED_DISTRIBUTIONS=("AlmaLinux" "Debian GNU/Linux" "Fedora Linux" "openSUSE Tumbleweed" "Raspbian GNU/Linux" "Rocky Linux" "Ubuntu")
-myCURRENT_DISTRIBUTION=$(awk -F= '/^NAME/{print $2}' /etc/os-release | tr -d '"')
-
-if [[ ! " ${mySUPPORTED_DISTRIBUTIONS[@]} " =~ " ${myCURRENT_DISTRIBUTION} " ]];
-  then
-    echo "# Only the following distributions are supported: AlmaLinux, Fedora, Debian, openSUSE Tumbleweed, Rocky Linux and Ubuntu."
-    echo
-    exit 1
-fi
-
-echo "${myDEPLOY}"
-echo
-echo "# This script will prepare a T-Pot SENSOR installation to transmit logs into this HIVE."
-echo
-
-# Ask if a T-Pot SENSOR was installed
-read -p "# Was a T-Pot SENSOR installed? (y/n): " mySENSOR_INSTALLED
-if [[ ${mySENSOR_INSTALLED} != "y" ]]; 
-    then
-      echo "# A T-Pot SENSOR must be installed to continue."
-      exit 1
-fi
-
-# Ask for the remote user
-read -p "# Enter the remote username T-Pot SENSOR was installed with: " mySSHUSER
-if [[ ${mySSHUSER} == "" ]]; 
-    then
-      echo "# You need to enter a user. Aborting."
-      exit 1
-fi
-
-# Validate IP/domain name loop
-while true; do
-  read -p "# Enter the IP/domain name of the SENSOR: " mySENSOR_IP
-  if [[ ${mySENSOR_IP} =~ ^([a-zA-Z0-9]+(\.[a-zA-Z0-9]+)*\.[a-zA-Z]{2,})|(([0-9]{1,3}\.){3}[0-9]{1,3})$ ]];
-    then
-      break
-    else
-      echo "# Invalid IP/domain. Please enter a valid IP or domain name."
-  fi
-done
-
-# Check if ssh key has been deployed
-read -p "# Has a SSH key been deployed to the SENSOR? (y/n): " mySSHKEY_DEPLOYED
-if [[ ${mySSHKEY_DEPLOYED} != "y" ]]; 
-    then
-      echo "# Generate a SSH key using 'ssh-keygen' and deploy it to the SENSOR (Example: ssh-copy-id -p 64295 ${mySSHUSER}@${mySENSOR_IP})."
-      exit 1
-fi
-
-# Validate IP/domain name of HIVE
-while true; do
-  read -p "# Enter the IP/domain name of this HIVE: " myTPOT_HIVE_IP
-  if [[ ${myTPOT_HIVE_IP} =~ ^([a-zA-Z0-9]+(\.[a-zA-Z0-9]+)*\.[a-zA-Z]{2,})|(([0-9]{1,3}\.){3}[0-9]{1,3})$ ]]; 
-    then
-      break
-    else
-      echo "# Invalid IP/domain. Please enter a valid IP or domain name."
-  fi
-done
-
-# Create a random SENSOR user name that is easily readable
-myLS_WEB_USER="sensor-${myADJECTIVE}-${myNOUN}"
-
-# Create a random password
-myLS_WEB_PW=$(tr -dc 'a-zA-Z0-9' < /dev/urandom | fold -w 32 | head -n 1)
-
-# Create myLS_WEB_USER_ENC
-myLS_WEB_USER_ENC=$(htpasswd -b -n "${myLS_WEB_USER}" "${myLS_WEB_PW}")
-myLS_WEB_USER_ENC_B64=$(echo -n "${myLS_WEB_USER_ENC}" | base64 -w0)
-
-# Create myTPOT_HIVE_USER, since this is for Logstash on the SENSOR, it needs to directly base64 encoded
-myTPOT_HIVE_USER=$(echo -n "${myLS_WEB_USER}:${myLS_WEB_PW}" | base64 -w0)
-
-# Print credentials
-echo "# The following SENSOR credentials have been created:"
-echo "# New SENSOR username: ${myLS_WEB_USER}"
-echo "# New SENSOR passowrd: ${myLS_WEB_PW}"
-echo "# New htpasswd encoded credentials: ${myLS_WEB_USER_ENC}"
-echo "# New htpasswd credentials base64 encoded: ${myLS_WEB_USER_ENC_B64}"
-echo "# New SENSOR credentials base64 encoded: ${myTPOT_HIVE_USER}"
-echo
-echo "# Ansible will ask for the ‘BECOME password‘ which is typically the password you ’sudo’ with on the SENSOR."
-echo "# The password will allow Ansible to run a reboot via sudo on the SENSOR."
-echo
-
-# Read LS_WEB_USER from file
-myENV_LS_WEB_USER=$(grep "^LS_WEB_USER=" "${myENV_FILE}" | sed 's/^LS_WEB_USER=//g' | tr -d "\"'")
-
-# Add the new SENSOR user
-if [ "${myENV_LS_WEB_USER}" == "" ];
-  then
-    myENV_LS_WEB_USER="${myLS_WEB_USER_ENC_B64}"
-  else
-    myENV_LS_WEB_USER="${myENV_LS_WEB_USER} ${myLS_WEB_USER_ENC_B64}"
-fi
-
-# Need to export for Ansible
-export myTPOT_HIVE_USER
-export myTPOT_HIVE_IP
-
-ANSIBLE_LOG_PATH=${HOME}/tpotce/data/deploy_sensor.log ansible-playbook ${myANSIBLE_TPOT_PLAYBOOK} -i ${mySENSOR_IP}, -c ssh -u ${mySSHUSER} --ask-become-pass -e "ansible_port=${myANSIBLE_PORT}"
-
-if [ "$?" == 0 ];
-  then
-	# Update the T-Pot .env config and lswebpasswd (avoid the need to restart T-Pot) on the host
-	echo "# Updating SENSOR users on this HIVE and in the T-Pot .env config:"
-    sed -i "/^LS_WEB_USER=/c\LS_WEB_USER=$myENV_LS_WEB_USER" "${myENV_FILE}"
-	: > "${HOME}"/tpotce/data/nginx/conf/lswebpasswd
-	for i in $myENV_LS_WEB_USER;
-	  do
-	    if [[ -n $i ]]; 
-	      then
-	        # Need to control newlines as they kept coming up for some reason
-	        echo -n "$i" | base64 -d -w0
-	        echo
-	        echo -n "$i" | base64 -d -w0 | tr -d '\n' >> ${HOME}/tpotce/data/nginx/conf/lswebpasswd
-	        echo >> ${HOME}/tpotce/data/nginx/conf/lswebpasswd
-	      fi
-	done
-fi
-
-unset myTPOT_HIVE_USER
-unset myTPOT_HIVE_IP

docker-compose.yml

@@ -1,830 +0,0 @@
-# T-Pot: STANDARD
-version: '3.9'
-
-networks:
-  adbhoney_local:
-  ciscoasa_local:
-  citrixhoneypot_local:
-  conpot_local_IEC104:
-  conpot_local_guardian_ast:
-  conpot_local_ipmi:
-  conpot_local_kamstrup_382:
-  cowrie_local:
-  ddospot_local:
-  dicompot_local:
-  dionaea_local:
-  elasticpot_local:
-  heralding_local:
-  ipphoney_local:
-  mailoney_local:
-  medpot_local:
-  redishoneypot_local:
-  sentrypeer_local:
-  tanner_local:
-  spiderfoot_local:
-  wordpot_local:
-  ewsposter_local:
-
-services:
-
-#########################################
-#### DEV
-#########################################
-#### T-Pot Init - Never delete this!
-#########################################
-
-# T-Pot Init Service
-  tpotinit:
-    container_name: tpotinit
-    env_file:
-      - .env
-    restart: always
-    stop_grace_period: 60s
-    tmpfs:
-      - /tmp/etc:uid=2000,gid=2000
-      - /tmp/:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/tpotinit:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-      - ${TPOT_DOCKER_COMPOSE}:/tmp/tpot/docker-compose.yml:ro
-      - ${TPOT_DATA_PATH}/blackhole:/etc/blackhole
-      - ${TPOT_DATA_PATH}:/data
-      - /var/run/docker.sock:/var/run/docker.sock:ro
-
-
-##################
-#### Honeypots
-##################
-
-# Adbhoney service
-  adbhoney:
-    container_name: adbhoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - adbhoney_local
-    ports:
-     - "5555:5555"
-    image: ${TPOT_REPO}/adbhoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/adbhoney/log:/opt/adbhoney/log
-     - ${TPOT_DATA_PATH}/adbhoney/downloads:/opt/adbhoney/dl
-
-# Ciscoasa service
-  ciscoasa:
-    container_name: ciscoasa
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/ciscoasa:uid=2000,gid=2000
-    networks:
-     - ciscoasa_local
-    ports:
-     - "5000:5000/udp"
-     - "8443:8443"
-    image: ${TPOT_REPO}/ciscoasa:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ciscoasa/log:/var/log/ciscoasa
-
-# CitrixHoneypot service
-  citrixhoneypot:
-    container_name: citrixhoneypot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - citrixhoneypot_local
-    ports:
-     - "443:443"
-    image: ${TPOT_REPO}/citrixhoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/citrixhoneypot/log:/opt/citrixhoneypot/logs
-
-# Conpot IEC104 service
-  conpot_IEC104:
-    container_name: conpot_iec104
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_IEC104.json
-     - CONPOT_LOG=/var/log/conpot/conpot_IEC104.log
-     - CONPOT_TEMPLATE=IEC104
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_IEC104
-    ports:
-     - "161:161/udp"
-     - "2404:2404"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot guardian_ast service
-  conpot_guardian_ast:
-    container_name: conpot_guardian_ast
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_guardian_ast.json
-     - CONPOT_LOG=/var/log/conpot/conpot_guardian_ast.log
-     - CONPOT_TEMPLATE=guardian_ast
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_guardian_ast
-    ports:
-     - "10001:10001"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot ipmi
-  conpot_ipmi:
-    container_name: conpot_ipmi
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_ipmi.json
-     - CONPOT_LOG=/var/log/conpot/conpot_ipmi.log
-     - CONPOT_TEMPLATE=ipmi
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_ipmi
-    ports:
-     - "623:623/udp"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Conpot kamstrup_382
-  conpot_kamstrup_382:
-    container_name: conpot_kamstrup_382
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - CONPOT_CONFIG=/etc/conpot/conpot.cfg
-     - CONPOT_JSON_LOG=/var/log/conpot/conpot_kamstrup_382.json
-     - CONPOT_LOG=/var/log/conpot/conpot_kamstrup_382.log
-     - CONPOT_TEMPLATE=kamstrup_382
-     - CONPOT_TMP=/tmp/conpot
-    tmpfs:
-     - /tmp/conpot:uid=2000,gid=2000
-    networks:
-     - conpot_local_kamstrup_382
-    ports:
-     - "1025:1025"
-     - "50100:50100"
-    image: ${TPOT_REPO}/conpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/conpot/log:/var/log/conpot
-
-# Cowrie service
-  cowrie:
-    container_name: cowrie
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-      - /tmp/cowrie:uid=2000,gid=2000
-      - /tmp/cowrie/data:uid=2000,gid=2000
-    networks:
-      - cowrie_local
-    ports:
-      - "22:22"
-      - "23:23"
-    image: ${TPOT_REPO}/cowrie:${TPOT_VERSION} 
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-      - ${TPOT_DATA_PATH}/cowrie/downloads:/home/cowrie/cowrie/dl
-      - ${TPOT_DATA_PATH}/cowrie/keys:/home/cowrie/cowrie/etc
-      - ${TPOT_DATA_PATH}/cowrie/log:/home/cowrie/cowrie/log
-      - ${TPOT_DATA_PATH}/cowrie/log/tty:/home/cowrie/cowrie/log/tty
-
-# Ddospot service
-  ddospot:
-    container_name: ddospot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ddospot_local
-    ports:
-     - "19:19/udp"
-     - "53:53/udp"
-     - "123:123/udp"
-#     - "161:161/udp"
-     - "1900:1900/udp"
-    image: ${TPOT_REPO}/ddospot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ddospot/log:/opt/ddospot/ddospot/logs
-     - ${TPOT_DATA_PATH}/ddospot/bl:/opt/ddospot/ddospot/bl
-     - ${TPOT_DATA_PATH}/ddospot/db:/opt/ddospot/ddospot/db
-
-# Dicompot service
-# Get the Horos Client for testing: https://horosproject.org/
-# Get Dicom images (CC BY 3.0): https://www.cancerimagingarchive.net/collections/
-# Put images (which must be in Dicom DCM format or it will not work!) into /data/dicompot/images
-  dicompot:
-    container_name: dicompot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dicompot_local
-    ports:
-     - "11112:11112"
-    image: ${TPOT_REPO}/dicompot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dicompot/log:/var/log/dicompot
-#     - ${TPOT_DATA_PATH}/dicompot/images:/opt/dicompot/images
-
-# Dionaea service
-  dionaea:
-    container_name: dionaea
-    stdin_open: true
-    tty: true
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - dionaea_local
-    ports:
-     - "20:20"
-     - "21:21"
-     - "42:42"
-     - "69:69/udp"
-     - "81:81"
-     - "135:135"
-     # - "443:443"
-     - "445:445"
-     - "1433:1433"
-     - "1723:1723"
-     - "1883:1883"
-     - "3306:3306"
-     # - "5060:5060"
-     # - "5060:5060/udp"
-     # - "5061:5061"
-     - "27017:27017"
-    image: ${TPOT_REPO}/dionaea:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/dionaea/roots/ftp:/opt/dionaea/var/dionaea/roots/ftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/tftp:/opt/dionaea/var/dionaea/roots/tftp
-     - ${TPOT_DATA_PATH}/dionaea/roots/www:/opt/dionaea/var/dionaea/roots/www
-     - ${TPOT_DATA_PATH}/dionaea/roots/upnp:/opt/dionaea/var/dionaea/roots/upnp
-     - ${TPOT_DATA_PATH}/dionaea:/opt/dionaea/var/dionaea
-     - ${TPOT_DATA_PATH}/dionaea/binaries:/opt/dionaea/var/dionaea/binaries
-     - ${TPOT_DATA_PATH}/dionaea/log:/opt/dionaea/var/log
-     - ${TPOT_DATA_PATH}/dionaea/rtp:/opt/dionaea/var/dionaea/rtp
-
-# ElasticPot service
-  elasticpot:
-    container_name: elasticpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - elasticpot_local
-    ports:
-     - "9200:9200"
-    image: ${TPOT_REPO}/elasticpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/elasticpot/log:/opt/elasticpot/log
-
-# Heralding service
-  heralding:
-    container_name: heralding
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/heralding:uid=2000,gid=2000
-    networks:
-     - heralding_local
-    ports:
-    # - "21:21"
-    # - "22:22"
-    # - "23:23"
-    # - "25:25"
-    # - "80:80"
-     - "110:110"
-     - "143:143"
-    # - "443:443"
-     - "465:465"
-     - "993:993"
-     - "995:995"
-    # - "3306:3306"
-    # - "3389:3389"
-     - "1080:1080"
-     - "5432:5432"
-     - "5900:5900"
-    image: ${TPOT_REPO}/heralding:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/heralding/log:/var/log/heralding
-
-# Honeytrap service
-  honeytrap:
-    container_name: honeytrap
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /tmp/honeytrap:uid=2000,gid=2000
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-    image: ${TPOT_REPO}/honeytrap:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/honeytrap/attacks:/opt/honeytrap/var/attacks
-     - ${TPOT_DATA_PATH}/honeytrap/downloads:/opt/honeytrap/var/downloads
-     - ${TPOT_DATA_PATH}/honeytrap/log:/opt/honeytrap/var/log
-
-# Ipphoney service
-  ipphoney:
-    container_name: ipphoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ipphoney_local
-    ports:
-     - "631:631"
-    image: ${TPOT_REPO}/ipphoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/ipphoney/log:/opt/ipphoney/log
-
-# Mailoney service
-  mailoney:
-    container_name: mailoney
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - HPFEEDS_SERVER=
-     - HPFEEDS_IDENT=user
-     - HPFEEDS_SECRET=pass
-     - HPFEEDS_PORT=20000
-     - HPFEEDS_CHANNELPREFIX=prefix
-    networks:
-     - mailoney_local
-    ports:
-     - "25:25"
-     - "587:25"
-    image: ${TPOT_REPO}/mailoney:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/mailoney/log:/opt/mailoney/logs
-
-# Medpot service
-  medpot:
-    container_name: medpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - medpot_local
-    ports:
-     - "2575:2575"
-    image: ${TPOT_REPO}/medpot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/medpot/log/:/var/log/medpot
-
-# Redishoneypot service
-  redishoneypot:
-    container_name: redishoneypot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - redishoneypot_local
-    ports:
-     - "6379:6379"
-    image: ${TPOT_REPO}/redishoneypot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/redishoneypot/log:/var/log/redishoneypot
-
-# SentryPeer service
-  sentrypeer:
-    container_name: sentrypeer
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-#    environment:
-#     - SENTRYPEER_PEER_TO_PEER=1
-    networks:
-     - sentrypeer_local
-    ports:
-#     - "4222:4222/udp"
-     - "5060:5060/tcp"
-     - "5060:5060/udp"
-#     - "127.0.0.1:8082:8082"
-    image: ${TPOT_REPO}/sentrypeer:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/sentrypeer/log:/var/log/sentrypeer
-
-#### Snare / Tanner
-## Tanner Redis Service
-  tanner_redis:
-    container_name: tanner_redis
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## PHP Sandbox service
-  tanner_phpox:
-    container_name: tanner_phpox
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/phpox:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Tanner API Service
-  tanner_api:
-    container_name: tanner_api
-    restart: always
-    depends_on:
-     - tanner_redis
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-    command: tannerapi
-
-## Tanner Service
-  tanner:
-    container_name: tanner
-    restart: always
-    depends_on:
-     - tanner_api
-     - tanner_phpox
-    tmpfs:
-     - /tmp/tanner:uid=2000,gid=2000
-    tty: true
-    networks:
-     - tanner_local
-    image: ${TPOT_REPO}/tanner:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    command: tanner
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/tanner/log:/var/log/tanner
-     - ${TPOT_DATA_PATH}/tanner/files:/opt/tanner/files
-
-## Snare Service
-  snare:
-    container_name: snare
-    restart: always
-    depends_on:
-     - tanner
-    tty: true
-    networks:
-     - tanner_local
-    ports:
-     - "80:80"
-    image: ${TPOT_REPO}/snare:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-# Wordpot service
-  wordpot:
-    container_name: wordpot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - wordpot_local
-    ports:
-     - "8080:80"
-    image: ${TPOT_REPO}/wordpot:${TPOT_VERSION}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/wordpot/log:/opt/wordpot/logs/
-
-
-##################
-#### NSM
-##################
-
-# Fatt service
-  fatt:
-    container_name: fatt
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/fatt:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/fatt/log:/opt/fatt/log
-
-# P0f service
-  p0f:
-    container_name: p0f
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    network_mode: "host"
-    image: ${TPOT_REPO}/p0f:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/p0f/log:/var/log/p0f
-
-# Suricata service
-  suricata:
-    container_name: suricata
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - OINKCODE=${OINKCODE:-OPEN} # Default to OPEN if unset or NULL (value provided by T-Pot .env)
-    # Loading external Rules from URL
-    # - FROMURL="https://username:password@yoururl.com|https://username:password@otherurl.com"
-    network_mode: "host"
-    cap_add:
-     - NET_ADMIN
-     - SYS_NICE
-     - NET_RAW
-    image: ${TPOT_REPO}/suricata:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/suricata/log:/var/log/suricata
-
-
-##################
-#### Tools 
-##################
-
-#### ELK
-## Elasticsearch service
-  elasticsearch:
-    container_name: elasticsearch
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - bootstrap.memory_lock=true
-     - ES_JAVA_OPTS=-Xms2048m -Xmx2048m
-     - ES_TMPDIR=/tmp
-    cap_add:
-     - IPC_LOCK
-    ulimits:
-      memlock:
-        soft: -1
-        hard: -1
-      nofile:
-        soft: 65536
-        hard: 65536
-    mem_limit: 4g
-    ports:
-     - "127.0.0.1:64298:9200"
-    image: ${TPOT_REPO}/elasticsearch:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Kibana service
-  kibana:
-    container_name: kibana
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    mem_limit: 1g
-    ports:
-     - "127.0.0.1:64296:5601"
-    image: ${TPOT_REPO}/kibana:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-## Logstash service
-  logstash:
-    container_name: logstash
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - LS_JAVA_OPTS=-Xms1024m -Xmx1024m
-     - TPOT_TYPE=${TPOT_TYPE:-HIVE}
-     - TPOT_HIVE_USER=${TPOT_HIVE_USER}
-     - TPOT_HIVE_IP=${TPOT_HIVE_IP}
-    ports:
-     - "127.0.0.1:64305:64305"
-    mem_limit: 2g
-    image: ${TPOT_REPO}/logstash:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-
-## Map Redis Service
-  map_redis:
-    container_name: map_redis
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    stop_signal: SIGKILL
-    tty: true
-    image: ${TPOT_REPO}/redis:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-
-## Map Web Service
-  map_web:
-    container_name: map_web
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    environment:
-     - MAP_COMMAND=AttackMapServer.py
-    stop_signal: SIGKILL
-    tty: true
-    ports:
-     - "127.0.0.1:64299:64299"
-    image: ${TPOT_REPO}/map:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-
-## Map Data Service
-  map_data:
-    container_name: map_data
-    restart: always
-    depends_on:
-      elasticsearch:
-        condition: service_healthy
-    environment:
-     - MAP_COMMAND=DataServer_v2.py
-     - TPOT_ATTACKMAP_TEXT=${TPOT_ATTACKMAP_TEXT}
-     - TZ=${TPOT_ATTACKMAP_TEXT_TIMEZONE}
-    stop_signal: SIGKILL
-    tty: true
-    image: ${TPOT_REPO}/map:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-#### /ELK
-
-# Ewsposter service
-  ewsposter:
-    container_name: ewsposter
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - ewsposter_local
-    environment:
-     - EWS_HPFEEDS_ENABLE=false
-     - EWS_HPFEEDS_HOST=host
-     - EWS_HPFEEDS_PORT=port
-     - EWS_HPFEEDS_CHANNELS=channels
-     - EWS_HPFEEDS_IDENT=user
-     - EWS_HPFEEDS_SECRET=secret
-     - EWS_HPFEEDS_TLSCERT=false
-     - EWS_HPFEEDS_FORMAT=json
-    image: ${TPOT_REPO}/ewsposter:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}:/data
-     - ${TPOT_DATA_PATH}/ews/conf/ews.ip:/opt/ewsposter/ews.ip
-
-# Nginx service
-  nginx:
-    container_name: nginx
-    restart: always
-    environment:
-      - TPOT_OSTYPE=${TPOT_OSTYPE}
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    tmpfs:
-     - /var/tmp/nginx/client_body
-     - /var/tmp/nginx/proxy
-     - /var/tmp/nginx/fastcgi
-     - /var/tmp/nginx/uwsgi
-     - /var/tmp/nginx/scgi
-     - /run
-     - /var/lib/nginx/tmp:uid=100,gid=82
-    network_mode: "host"
-    ports:
-     - "64297:64297"
-    image: ${TPOT_REPO}/nginx:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    read_only: true
-    volumes:
-     - ${TPOT_DATA_PATH}/nginx/cert/:/etc/nginx/cert/:ro
-     - ${TPOT_DATA_PATH}/nginx/conf/nginxpasswd:/etc/nginx/nginxpasswd:ro
-     - ${TPOT_DATA_PATH}/nginx/conf/lswebpasswd:/etc/nginx/lswebpasswd:ro
-     - ${TPOT_DATA_PATH}/nginx/log/:/var/log/nginx/
-
-# Spiderfoot service
-  spiderfoot:
-    container_name: spiderfoot
-    restart: always
-    depends_on:
-      tpotinit:
-        condition: service_healthy
-    networks:
-     - spiderfoot_local
-    ports:
-     - "127.0.0.1:64303:8080"
-    image: ${TPOT_REPO}/spiderfoot:${TPOT_VERSION}
-    pull_policy: ${TPOT_PULL_POLICY}
-    volumes:
-     - ${TPOT_DATA_PATH}/spiderfoot:/home/spiderfoot/.spiderfoot

docker/adbhoney/Dockerfile

@@ -1,23 +1,18 @@
-FROM alpine:3.19
+FROM alpine 
 #
 # Include dist
-COPY dist/ /root/dist/
+ADD dist/ /root/dist/
 #
 # Install packages
-RUN apk --no-cache -U add \
+RUN apk -U add \
-		git \
+            git \
-		procps \
+            libcap \
-		py3-psutil \
+            python3 \
-		py3-requests \
+            python3-dev && \
-		python3 && \
 #
 # Install adbhoney from git
-    git clone https://github.com/huuck/ADBHoney /opt/adbhoney && \
+    git clone --depth=1 https://github.com/huuck/ADBHoney /opt/adbhoney && \
-    cd /opt/adbhoney && \
-#    git checkout 2417a7a982f4fd527b3a048048df9a23178767ad && \
-    git checkout 42afd98611724ca3d694a48b694c957e8d953db4 && \
     cp /root/dist/adbhoney.cfg /opt/adbhoney && \
-    cp /root/dist/cpu_check.py / && \
     sed -i 's/dst_ip/dest_ip/' /opt/adbhoney/adbhoney/core.py && \
     sed -i 's/dst_port/dest_port/' /opt/adbhoney/adbhoney/core.py && \
 #
@@ -25,15 +20,16 @@ RUN apk --no-cache -U add \
     addgroup -g 2000 adbhoney && \
     adduser -S -H -s /bin/ash -u 2000 -D -g 2000 adbhoney && \
     chown -R adbhoney:adbhoney /opt/adbhoney && \
+    setcap cap_net_bind_service=+ep /usr/bin/python3.7 && \
 #
 # Clean up
-    apk del --purge git && \
+    apk del --purge git \
-    rm -rf /root/* /opt/adbhoney/.git /var/cache/apk/*
+                    python3-dev && \
+    rm -rf /root/* && \
+    rm -rf /var/cache/apk/*
 #
 # Set workdir and start adbhoney
 STOPSIGNAL SIGINT
-# Adbhoney sometimes hangs at 100% CPU usage, if detected container will become unhealthy and restarted by tpotinit
-HEALTHCHECK --interval=5m --timeout=30s --retries=3 CMD python3 /cpu_check.py $(pgrep -of run.py) 99
 USER adbhoney:adbhoney
 WORKDIR /opt/adbhoney/
-CMD /usr/bin/python3 run.py
+CMD nohup /usr/bin/python3 run.py

docker/adbhoney/dist/adbhoney.cfg

@@ -3,8 +3,6 @@ hostname = honeypot01
 
 address = 0.0.0.0
 port = 5555
-http_download = true
-http_timeout = 45
 
 download_dir = dl/
 log_dir = log/

docker/adbhoney/dist/cpu_check.py

@@ -1,42 +0,0 @@
-import psutil
-import sys
-import time
-
-if len(sys.argv) != 3:
-    print("Usage: cpu_check.py <PID> <CPU_USAGE_THRESHOLD>")
-    sys.exit(1)
-
-try:
-    pid = int(sys.argv[1])
-except ValueError:
-    print("Please provide a valid integer value for the PID.")
-    sys.exit(1)
-
-try:
-    cpu_threshold = float(sys.argv[2])
-except ValueError:
-    print("Please provide a valid number for the CPU usage threshold.")
-    sys.exit(1)
-
-try:
-    target_process = psutil.Process(pid)
-except psutil.NoSuchProcess:
-    print(f"No process with the PID {pid} was found.")
-    sys.exit(1)
-
-# Prepare to calculate the average CPU usage over 3 intervals of 1 second each
-cpu_usages = []
-for _ in range(3):
-    cpu_usages.append(target_process.cpu_percent(interval=1))
-
-# Calculate the average CPU usage
-average_cpu_usage = sum(cpu_usages) / len(cpu_usages)
-print(f"Average CPU Usage of PID {pid} over 3 seconds: {average_cpu_usage}%")
-
-# Check average CPU usage against the threshold
-if average_cpu_usage >= cpu_threshold:
-    print(f"Average CPU usage of PID {pid} is above or equal to the threshold of {cpu_threshold}%.")
-    sys.exit(1)
-else:
-    print(f"Average CPU usage of PID {pid} is below the threshold of {cpu_threshold}%. Exiting with code 0.")
-    sys.exit(0)

docker/adbhoney/docker-compose.yml

@@ -10,14 +10,12 @@ services:
     build: .
     container_name: adbhoney
     restart: always
-    #    cpu_count: 1
-    #    cpus: 0.25
     networks:
      - adbhoney_local
     ports:
      - "5555:5555"
-    image: "dtagdevsec/adbhoney:24.04"
+    image: "dtagdevsec/adbhoney:1903"
     read_only: true
     volumes:
-     - $HOME/tpotce/data/adbhoney/log:/opt/adbhoney/log
+     - /data/adbhoney/log:/opt/adbhoney/log
-     - $HOME/tpotce/data/adbhoney/downloads:/opt/adbhoney/dl
+     - /data/adbhoney/downloads:/opt/adbhoney/dl

docker/builder.sh

@@ -1,119 +0,0 @@
-#!/bin/bash
-
-# Buildx Example: docker buildx build --platform linux/amd64,linux/arm64 -t username/demo:latest --push .
-
-# Setup Vars
-myPLATFORMS="linux/amd64,linux/arm64"
-myHUBORG_DOCKER="dtagdevsec"
-myHUBORG_GITHUB="ghcr.io/telekom-security"
-myTAG="24.04"
-myIMAGESBASE="tpotinit adbhoney ciscoasa citrixhoneypot conpot cowrie ddospot dicompot dionaea elasticpot endlessh ewsposter fatt glutton hellpot heralding honeypots honeytrap ipphoney log4pot mailoney medpot nginx p0f redishoneypot sentrypeer spiderfoot suricata wordpot"
-myIMAGESELK="elasticsearch kibana logstash map"
-myIMAGESTANNER="phpox redis snare tanner"
-myBUILDERLOG="builder.log"
-myBUILDERERR="builder.err"
-myBUILDCACHE="/buildcache"
-
-# Got root?
-myWHOAMI=$(whoami)
-if [ "$myWHOAMI" != "root" ]
-  then
-    echo "Need to run as root ..."
-    exit
-fi
-
-# Check for Buildx
-docker buildx > /dev/null 2>&1 
-if [ "$?" == "1" ];
-  then
-    echo "### Build environment not setup. Install docker engine from docker:"
-    echo "### https://docs.docker.com/engine/install/debian/"
-fi
-
-# Let's ensure arm64 and amd64 are supported
-echo "### Let's ensure ARM64 and AMD64 are supported ..."
-myARCHITECTURES="amd64 arm64"
-mySUPPORTED=$(docker buildx inspect --bootstrap)
-
-for i in $myARCHITECTURES;
-  do
-    if ! echo $mySUPPORTED | grep -q linux/$i;
-      then
-        echo "## Installing $i support ..."
-        docker run --privileged --rm tonistiigi/binfmt --install $i
-        docker buildx inspect --bootstrap
-      else
-        echo "## $i support detected!"
-    fi
-  done
-echo
-
-# Let's ensure we have builder created with cache support
-echo "### Checking for mybuilder ..."
-if ! docker buildx ls | grep -q mybuilder;
-  then
-    echo "## Setting up mybuilder ..."
-    docker buildx create --name mybuilder
-    # Set as default, otherwise local cache is not supported
-    docker buildx use mybuilder
-    docker buildx inspect --bootstrap
-  else
-    echo "## Found mybuilder!"
-fi
-echo
-
-# Only run with command switch
-if [ "$1" == "" ]; then
-  echo "### T-Pot Multi Arch Image Builder."
-  echo "## Usage: builder.sh [build, push]"
-  echo "## build - Just build images, do not push."
-  echo "## push - Build and push images."
-  echo "## Pushing requires an active docker login."
-  exit
-fi
-
-fuBUILDIMAGES () {
-local myPATH="$1"
-local myIMAGELIST="$2"
-local myPUSHOPTION="$3"
-
-for myREPONAME in $myIMAGELIST;
-  do
-    echo -n "Now building: $myREPONAME in $myPATH$myREPONAME/."
-    docker buildx build --cache-from "type=local,src=$myBUILDCACHE" \
-                        --cache-to "type=local,dest=$myBUILDCACHE" \
-                        --platform $myPLATFORMS \
-                        -t $myHUBORG_DOCKER/$myREPONAME:$myTAG \
-                        -t $myHUBORG_GITHUB/$myREPONAME:$myTAG \
-                        $myPUSHOPTION $myPATH$myREPONAME/. >> $myBUILDERLOG 2>&1
-    if [ "$?" != "0" ];
-      then
-	echo " [ ERROR ] - Check logs!"
-	echo "Error building $myREPONAME" >> "$myBUILDERERR"
-      else
-	echo " [ OK ]"
-    fi
-done
-}
-
-# Just build images
-if [ "$1" == "build" ];
-  then
-    mkdir -p $myBUILDCACHE
-    rm -f "$myBUILDERLOG" "$myBUILDERERR" 
-    echo "### Building images ..."
-    fuBUILDIMAGES "" "$myIMAGESBASE" ""
-    fuBUILDIMAGES "elk/" "$myIMAGESELK" ""
-    fuBUILDIMAGES "tanner/" "$myIMAGESTANNER" ""
-fi
-
-# Build and push images
-if [ "$1" == "push" ];
-  then
-    mkdir -p $myBUILDCACHE
-    rm -f "$myBUILDERLOG" "$myBUILDERERR" 
-    echo "### Building and pushing images ..."
-    fuBUILDIMAGES "" "$myIMAGESBASE" "--push"
-    fuBUILDIMAGES "elk/" "$myIMAGESELK" "--push"
-    fuBUILDIMAGES "tanner/" "$myIMAGESTANNER" "--push"
-fi

docker/ciscoasa/Dockerfile

@@ -1,20 +1,18 @@
-FROM alpine:3.19
+FROM alpine
 #
 # Include dist
-COPY dist/ /root/dist/
+ADD dist/ /root/dist/
 #
 # Setup env and apt
-RUN apk --no-cache -U upgrade && \
+RUN apk -U upgrade && \
-    apk --no-cache add build-base \
+    apk add build-base \
-		git \
+            git \
-		libffi \
+            libffi \
-		libffi-dev \
+            libffi-dev \
-		openssl \
+            openssl \
-		openssl-dev \
+            openssl-dev \
-		py3-cryptography \
+            python3 \
-		py3-pip \
+            python3-dev && \
-		python3 \
-		python3-dev && \
 #
 # Setup user
     addgroup -g 2000 ciscoasa && \
@@ -23,11 +21,10 @@ RUN apk --no-cache -U upgrade && \
 # Get and install packages
     mkdir -p /opt/ && \
     cd /opt/ && \
-    git clone https://github.com/cymmetria/ciscoasa_honeypot && \
+    git clone --depth=1 https://github.com/cymmetria/ciscoasa_honeypot && \
     cd ciscoasa_honeypot && \
-    git checkout d6e91f1aab7fe6fc01fabf2046e76b68dd6dc9e2 && \
+    pip3 install --no-cache-dir --upgrade pip && \
-    sed -i "s/git+git/git+https/g" requirements.txt && \
+    pip3 install --no-cache-dir -r requirements.txt && \
-    pip3 install --break-system-packages --no-cache-dir -r requirements.txt && \
     cp /root/dist/asa_server.py /opt/ciscoasa_honeypot && \
     chown -R ciscoasa:ciscoasa /opt/ciscoasa_honeypot && \
 #
@@ -38,7 +35,6 @@ RUN apk --no-cache -U upgrade && \
                     openssl-dev \
                     python3-dev && \
     rm -rf /root/* && \
-    rm -rf /opt/ciscoasa_honeypot/.git && \
     rm -rf /var/cache/apk/*
 #
 # Start ciscoasa

docker/ciscoasa/README.md

@@ -0,0 +1,15 @@
+[![](https://images.microbadger.com/badges/version/dtagdevsec/ciscoasa:1903.svg)](https://microbadger.com/images/dtagdevsec/ciscoasa:1903 "Get your own version badge on microbadger.com") [![](https://images.microbadger.com/badges/image/dtagdevsec/ciscoasa:1903.svg)](https://microbadger.com/images/dtagdevsec/ciscoasa:1903 "Get your own image badge on microbadger.com")
+
+# ciscoasa
+
+[Ciscoasa](https://github.com/cymmetria/ciscoasa_honeypot) is a low interaction honeypot for the Cisco ASA component capable of detecting CVE-2018-0101, a DoS and remote code execution vulnerability
+
+This dockerized version is part of the **[T-Pot community honeypot](http://dtag-dev-sec.github.io/)** of Deutsche Telekom AG.
+
+The `Dockerfile` contains the blueprint for the dockerized ciscoasa and will be used to setup the docker image.
+
+The `docker-compose.yml` contains the necessary settings to test conpot using `docker-compose`. This will ensure to start the docker container with the appropriate permissions and port mappings.
+
+# Ciscoasa Dashboard
+
+![Ciscoasa Dashboard](doc/dashboard.png)

docker/ciscoasa/docker-compose.yml

@@ -1,8 +1,5 @@
 version: '2.3'
 
-networks:
-  ciscoasa_local:
-
 services:
 
 # Ciscoasa service
@@ -12,14 +9,11 @@ services:
     restart: always
     tmpfs:
      - /tmp/ciscoasa:uid=2000,gid=2000
-#    cpu_count: 1
+    network_mode: "host"
-#    cpus: 0.25
-    networks:
-     - ciscoasa_local
     ports:
      - "5000:5000/udp"
      - "8443:8443"
-    image: "dtagdevsec/ciscoasa:24.04"
+    image: "dtagdevsec/ciscoasa:1903"
     read_only: true
     volumes:
-     - $HOME/tpotce/data/ciscoasa/log:/var/log/ciscoasa
+     - /data/ciscoasa/log:/var/log/ciscoasa

docker/citrixhoneypot/Dockerfile

@@ -1,19 +1,19 @@
-FROM alpine:3.19
+FROM alpine 
 #
 # Install packages
-RUN apk --no-cache -U add \
+RUN apk -U add \
-		git \
+            git \
-		libcap \
+            libcap \
-		openssl \
+	    openssl \
-		py3-pip \
+            python3 \
-		python3 && \
+            python3-dev && \
 #
-    pip3 install --break-system-packages --no-cache-dir python-json-logger && \
+    pip3 install --no-cache-dir python-json-logger && \
 #
 # Install CitrixHoneypot from GitHub
-    git clone https://github.com/t3chn0m4g3/CitrixHoneypot /opt/citrixhoneypot && \
+#    git clone --depth=1 https://github.com/malwaretech/citrixhoneypot /opt/citrixhoneypot && \
-    cd /opt/citrixhoneypot && \
+#    git clone --depth=1 https://github.com/vorband/CitrixHoneypot /opt/citrixhoneypot && \
-    git checkout f59ad7320dc5bbb8c23c8baa5f111b52c52fbef3 && \
+    git clone --depth=1 https://github.com/t3chn0m4g3/CitrixHoneypot /opt/citrixhoneypot && \
 #
 # Setup user, groups and configs
     mkdir -p /opt/citrixhoneypot/logs /opt/citrixhoneypot/ssl && \
@@ -28,13 +28,13 @@ RUN apk --no-cache -U add \
     addgroup -g 2000 citrixhoneypot && \
     adduser -S -H -s /bin/ash -u 2000 -D -g 2000 citrixhoneypot && \
     chown -R citrixhoneypot:citrixhoneypot /opt/citrixhoneypot && \
-    setcap cap_net_bind_service=+ep $(readlink -f $(type -P python3)) && \
+    setcap cap_net_bind_service=+ep /usr/bin/python3.8 && \
 #
 # Clean up
     apk del --purge git \
-                    openssl && \
+                    openssl \
+                    python3-dev && \
     rm -rf /root/* && \
-    rm -rf /opt/citrixhoneypot/.git && \
     rm -rf /var/cache/apk/*
 #
 # Set workdir and start citrixhoneypot

docker/citrixhoneypot/docker-compose.yml

@@ -10,13 +10,11 @@ services:
     build: .
     container_name: citrixhoneypot
     restart: always
-#    cpu_count: 1
-#    cpus: 0.25
     networks:
      - citrixhoneypot_local
     ports:
      - "443:443"
-    image: "dtagdevsec/citrixhoneypot:24.04"
+    image: "dtagdevsec/citrixhoneypot:1903"
     read_only: true
     volumes:
-     - $HOME/tpotce/data/citrixhoneypot/log:/opt/citrixhoneypot/logs
+     - /data/citrixhoneypot/logs:/opt/citrixhoneypot/logs

docker/conpot/Dockerfile

@@ -1,56 +1,33 @@
-FROM alpine:3.19
+FROM alpine:3.10
 #
 # Include dist
-COPY dist/ /root/dist/
+ADD dist/ /root/dist/
 #
 # Setup apt
-RUN apk --no-cache -U add \
+RUN sed -i 's/dl-cdn/dl-2/g' /etc/apk/repositories && \
-			build-base \
+    apk -U add \
-			cython \
+             build-base \
-			file \
+             file \
-			git \
+             git \
-			libev \
+             libev \
-			libtool \
+             libtool \
-			libcap \
+             libcap \
-			libffi-dev \
+             libxslt \
-			libxslt \
+             libxslt-dev \
-			libxslt-dev \
+             mariadb-dev \
-			mariadb-dev \
+             pkgconfig \
-			pkgconfig \
+             python3 \
-			procps \
+             python3-dev \
-			python3 \
+             py-cffi \
-			python3-dev \
+             py-cryptography \
-			py3-cffi \
+             tcpdump \
-			py3-cryptography \
+             wget && \
-			py3-freezegun \
-			py3-gevent \
-			py3-lxml \
-			py3-natsort \
-			py3-pip \
-			py3-ply \
-			py3-psutil \
-			py3-pycryptodomex \
-			py3-pytest \
-			py3-requests \
-			py3-pyserial \
-			py3-setuptools \
-			py3-slugify \
-			py3-snmp \
-			py3-sphinx \
-			py3-wheel \
-			py3-zope-event \
-			py3-zope-interface \
-			wget && \
 #
 # Setup ConPot
-    git clone https://github.com/t3chn0m4g3/cpppo /opt/cpppo && \
+    git clone --depth=1 https://github.com/mushorg/conpot /opt/conpot && \
-    cd /opt/cpppo && \
-    pip3 install --break-system-packages --no-cache-dir --upgrade pip && \
-    pip3 install --break-system-packages --no-cache-dir . && \
-    git clone https://github.com/mushorg/conpot /opt/conpot && \
     cd /opt/conpot/ && \
-	git checkout 26c67d11b08a855a28e87abd186d959741f46c7f && \
+    # Patch to accept ENV for MIB path
-    # git checkout b3740505fd26d82473c0d7be405b372fa0f82575 && \
+    sed -i "s/tmp_mib_dir = tempfile.mkdtemp()/tmp_mib_dir = tempfile.mkdtemp(dir=os.environ['CONPOT_TMP'])/" /opt/conpot/conpot/protocols/snmp/snmp_server.py && \
     # Change template default ports if <1024
     sed -i 's/port="2121"/port="21"/' /opt/conpot/conpot/templates/default/ftp/ftp.xml && \ 
     sed -i 's/port="8800"/port="80"/' /opt/conpot/conpot/templates/default/http/http.xml && \ 
@@ -61,24 +38,24 @@ RUN apk --no-cache -U add \
     sed -i 's/port="6969"/port="69"/' /opt/conpot/conpot/templates/default/tftp/tftp.xml && \ 
     sed -i 's/port="16100"/port="161"/' /opt/conpot/conpot/templates/IEC104/snmp/snmp.xml && \ 
     sed -i 's/port="6230"/port="623"/' /opt/conpot/conpot/templates/ipmi/ipmi/ipmi.xml && \ 
-    cp /root/dist/requirements.txt . && \
+    pip3 install --no-cache-dir -U setuptools && \
-    pip3 install --break-system-packages --no-cache-dir . && \
+    pip3 install --no-cache-dir . && \
     cd / && \
     rm -rf /opt/conpot /tmp/* /var/tmp/* && \
-    setcap cap_net_bind_service=+ep $(readlink -f $(type -P python3)) && \
+    setcap cap_net_bind_service=+ep /usr/bin/python3.7 && \
 #    
 # Get wireshark manuf db for scapy, setup configs, user, groups
     mkdir -p /etc/conpot /var/log/conpot /usr/share/wireshark && \
-    wget https://www.wireshark.org/download/automated/data/manuf -o /usr/share/wireshark/manuf && \
+    wget https://github.com/wireshark/wireshark/raw/master/manuf -o /usr/share/wireshark/manuf && \
     cp /root/dist/conpot.cfg /etc/conpot/conpot.cfg && \
-    cp -R /root/dist/templates /usr/lib/$(readlink -f $(type -P python3) | cut -f4 -d"/")/site-packages/conpot/ && \
+    cp -R /root/dist/templates /usr/lib/python3.7/site-packages/conpot/ && \
-    cp /root/dist/cpu_check.py / && \
     addgroup -g 2000 conpot && \
     adduser -S -s /bin/ash -u 2000 -D -g 2000 conpot && \
 #
 # Clean up
     apk del --purge \
             build-base \
+            cython-dev \
             file \
             git \
             libev \
@@ -87,6 +64,7 @@ RUN apk --no-cache -U add \
             mariadb-dev \
             pkgconfig \
             python3-dev \
+            py-cffi \
             wget && \
     rm -rf /root/* && \
     rm -rf /tmp/* && \
@@ -94,7 +72,5 @@ RUN apk --no-cache -U add \
 #
 # Start conpot
 STOPSIGNAL SIGINT
-# Conpot sometimes hangs at 100% CPU usage, if detected container will become unhealthy and restarted by tpotinit
-HEALTHCHECK --interval=5m --timeout=30s --retries=3 CMD python3 /cpu_check.py $(pgrep -of conpot) 99
 USER conpot:conpot
-CMD exec /usr/bin/conpot --mibcache $CONPOT_TMP --temp_dir $CONPOT_TMP --template $CONPOT_TEMPLATE --logfile $CONPOT_LOG --config $CONPOT_CONFIG
+CMD exec /usr/bin/conpot --temp_dir $CONPOT_TMP --template $CONPOT_TEMPLATE --logfile $CONPOT_LOG --config $CONPOT_CONFIG

docker/conpot/README.md

@@ -0,0 +1,15 @@
+[![](https://images.microbadger.com/badges/version/dtagdevsec/conpot:1903.svg)](https://microbadger.com/images/dtagdevsec/conpot:1903 "Get your own version badge on microbadger.com") [![](https://images.microbadger.com/badges/image/dtagdevsec/conpot:1903.svg)](https://microbadger.com/images/dtagdevsec/conpot:1903 "Get your own image badge on microbadger.com")
+
+# conpot
+
+[ConPot](http://conpot.org/) is a low interactive server side Industrial Control Systems honeypot designed to be easy to deploy, modify and extend. By providing a range of common industrial control protocols we created the basics to build your own system, capable to emulate complex infrastructures to convince an adversary that he just found a huge industrial complex. To improve the deceptive capabilities, we also provided the possibility to server a custom human machine interface to increase the honeypots attack surface. The response times of the services can be artificially delayed to mimic the behavior of a system under constant load. Because we are providing complete stacks of the protocols, Conpot can be accessed with productive HMI's or extended with real hardware. Conpot is developed under the umbrella of the [Honeynet Project](https://www.honeynet.org/) and on the shoulders of a couple of very big giants.
+
+This dockerized version is part of the **[T-Pot community honeypot](http://dtag-dev-sec.github.io/)** of Deutsche Telekom AG.
+
+The `Dockerfile` contains the blueprint for the dockerized conpot and will be used to setup the docker image.
+
+The `docker-compose.yml` contains the necessary settings to test conpot using `docker-compose`. This will ensure to start the docker container with the appropriate permissions and port mappings.
+
+# ConPot Dashboard
+
+![ConPot Dashboard](doc/dashboard.png)

docker/conpot/dist/conpot.cfg

@@ -3,7 +3,7 @@ sensorid = conpot
 
 [virtual_file_system]
 data_fs_url = %(CONPOT_TMP)s
-fs_url = tar:///usr/lib/python3.11/site-packages/conpot/data.tar
+fs_url = tar:///usr/lib/python3.7/site-packages/conpot/data.tar
 
 [session]
 timeout = 30

docker/conpot/dist/cpu_check.py

@@ -1,42 +0,0 @@
-import psutil
-import sys
-import time
-
-if len(sys.argv) != 3:
-    print("Usage: cpu_check.py <PID> <CPU_USAGE_THRESHOLD>")
-    sys.exit(1)
-
-try:
-    pid = int(sys.argv[1])
-except ValueError:
-    print("Please provide a valid integer value for the PID.")
-    sys.exit(1)
-
-try:
-    cpu_threshold = float(sys.argv[2])
-except ValueError:
-    print("Please provide a valid number for the CPU usage threshold.")
-    sys.exit(1)
-
-try:
-    target_process = psutil.Process(pid)
-except psutil.NoSuchProcess:
-    print(f"No process with the PID {pid} was found.")
-    sys.exit(1)
-
-# Prepare to calculate the average CPU usage over 3 intervals of 1 second each
-cpu_usages = []
-for _ in range(3):
-    cpu_usages.append(target_process.cpu_percent(interval=1))
-
-# Calculate the average CPU usage
-average_cpu_usage = sum(cpu_usages) / len(cpu_usages)
-print(f"Average CPU Usage of PID {pid} over 3 seconds: {average_cpu_usage}%")
-
-# Check average CPU usage against the threshold
-if average_cpu_usage >= cpu_threshold:
-    print(f"Average CPU usage of PID {pid} is above or equal to the threshold of {cpu_threshold}%.")
-    sys.exit(1)
-else:
-    print(f"Average CPU usage of PID {pid} is below the threshold of {cpu_threshold}%. Exiting with code 0.")
-    sys.exit(0)

docker/conpot/dist/requirements.txt

@@ -1,18 +0,0 @@
-pysnmp-mibs
-pysmi
-libtaxii>=1.1.0
-crc16
-scapy==2.4.3rc1
-hpfeeds3
-modbus-tk
-stix-validator
-stix
-cybox
-bacpypes==0.17.0
-pyghmi==1.4.1
-mixbox
-modbus-tk
-fs==2.3.0
-tftpy
-# some freezegun versions broken
-sphinx_rtd_theme

docker/conpot/dist/templates/IEC104/template.xml

@@ -70,7 +70,7 @@
                 <value type="value">100000000</value>
             </key>
             <key name="ifPhysAddress">
-                <value type="value">"0x000e8c29c51a"</value>
+                <value type="value">"\x00\x0e\x8c\x29\xc5\x1a"</value>
             </key>
             <key name="ifAdminStatus">
                 <value type="value">1</value>
@@ -91,19 +91,19 @@
                 <value type="value">1</value>
             </key>
             <key name="ifInOctets">
-                <value type="function">conpot.emulators.misc.sysinfo.BytesRecv</value>		    
+                <value type="value">1618895</value>
             </key>
             <key name="ifInUcastPkts">
-                <value type="function">conpot.emulators.misc.sysinfo.PacketsRecv</value> 
+                <value type="value">7018</value>
             </key>
             <key name="ifInNUcastPkts">
                 <value type="value">291</value>
             </key>
             <key name="ifOutOctets">
-                <value type="function">conpot.emulators.misc.sysinfo.BytesSent</value>
+                <value type="value">455107</value>
             </key>
             <key name="ifOutUcastPkts">
-                <value type="function">conpot.emulators.misc.sysinfo.PacketsSent</value> 
+                <value type="value">872264</value>
             </key>
             <key name="ifOutUNcastPkts">
                 <value type="value">143</value>
@@ -168,7 +168,7 @@
                 <value type="value">0</value>
             </key>
             <key name="ipAdEntAddr">
-                <value type="function">conpot.emulators.misc.sysinfo.LocalIP</value>
+                <value type="value">"217.172.190.137"</value>
             </key>
             <key name="ipAdEntIfIndex">
                 <value type="value">1</value>
@@ -290,7 +290,7 @@
                 <value type="value">45</value>
             </key>
             <key name="tcpCurrEstab">
-                <value type="function">conpot.emulators.misc.sysinfo.TcpCurrEstab</value>
+                <value type="value">0</value>
             </key>
             <key name="tcpInSegs">
                 <value type="value">30321</value>
@@ -305,7 +305,7 @@
                 <value type="value">2</value>
             </key>
             <key name="tcpConnLocalAddress">
-                <value type="function">conpot.emulators.misc.sysinfo.LocalIP</value>
+                <value type="value">"217.172.190.137"</value>
             </key>
             <key name="tcpConnLocalPort">
                 <value type="value">2404</value>
@@ -336,7 +336,7 @@
                 <value type="value">47</value>
             </key>
             <key name="udpLocalAddress">
-                <value type="value">"163.172.189.137"</value>
+                <value type="value">"217.172.190.137"</value>
             </key>
             <key name="udpLocalPort">
                 <value type="value">161</value>
@@ -347,10 +347,6 @@
 
 
             <!-- IEC104 Protocol parameter -->
-            <!-- Common (Object) Address, aka COA, Station Address -->
-            <key name="CommonAddress">
-                <value type="value">"0x1e28"</value>
-            </key>
             <!-- Timeout of connection establishment -->
             <key name="T_0">
                 <value type="value">30</value>

docker/conpot/dist/templates/kamstrup_382/template.xml

@@ -11,7 +11,7 @@
         <!-- Core value that can be retrieved from the databus by key -->
         <key_value_mappings>
             <key name="power_simulator">
-                <value type="function">conpot.emulators.kamstrup.usage_simulator.UsageSimulator</value>
+                <value type="function">conpot.protocols.kamstrup.usage_simulator.UsageSimulator</value>
             </key>
             <key name="register_1024">
                 <value type="value">0</value>