# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.

# Allow users of this group to interact with dhcpcd via the control socket.
#controlgroup wheel

# Inform the DHCP server of our hostname for DDNS.
hostname

# Use the hardware address of the interface for the Client ID.
clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
# Some non-RFC compliant DHCP servers do not reply with this set.
# In this case, comment out duid and enable clientid above.
#duid

# Persist interface configuration when dhcpcd exits.
persistent

# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit

# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
# Respect the network MTU. This is applied to DHCP routes.
option interface_mtu

# Most distributions have NTP support.
#option ntp_servers

# A ServerID is required by RFC2131.
require dhcp_server_identifier

# Generate SLAAC address using the Hardware Address of the interface
#slaac hwaddr
# OR generate Stable Private IPv6 Addresses based from the DUID
slaac private

# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
# !! DO NOT EDIT THESE LINES BELOW PLEASE !!
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

# static IP configuration:
denyinterfaces wlan0

interface eth0
static domain_name_servers=8.8.8.8 1.1.1.1
metric=201

interface usb0
static ip_address=10.0.0.2/24
static routers=10.0.0.1
static domain_name_servers=10.0.0.1 8.8.8.8 1.1.1.1
metric=202

interface bnep0
static domain_name_servers=8.8.8.8 1.1.1.1
metric=203