Update build

Signed-off-by: jayofelony <oudshoorn.jeroen@gmail.com>

.idea/misc.xml

@@ -3,7 +3,7 @@
   <component name="Black">
     <option name="sdkName" value="Python 3.11 (pwnagotchi)" />
   </component>
-  <component name="ProjectRootManager" version="2" project-jdk-name="Python 3.10 (pwnagotchi)" project-jdk-type="Python SDK" />
+  <component name="ProjectRootManager" version="2" project-jdk-name="Python 3.12 (pwnagotchi)" project-jdk-type="Python SDK" />
   <component name="PythonCompatibilityInspectionAdvertiser">
     <option name="version" value="3" />
   </component>

.idea/pwnagotchi.iml

@@ -4,7 +4,7 @@
     <content url="file://$MODULE_DIR$">
       <excludeFolder url="file://$MODULE_DIR$/venv" />
     </content>
-    <orderEntry type="jdk" jdkName="Python 3.10 (pwnagotchi)" jdkType="Python SDK" />
+    <orderEntry type="jdk" jdkName="Python 3.12 (pwnagotchi)" jdkType="Python SDK" />
     <orderEntry type="sourceFolder" forTests="false" />
   </component>
   <component name="PyDocumentationSettings">

builder/data/32bit/etc/bash_completion.d/pwnagotchi_completion.sh

@@ -1,36 +0,0 @@
-_show_complete()
-{
-    local cur opts node_names all_options opt_line
-    all_options="
-pwnagotchi -h --help -C --config -U --user-config --manual --skip-session --clear --debug --version --print-config --check-update --donate {plugins,google}
-pwnagotchi plugins -h --help {list,install,enable,disable,uninstall,update,upgrade}
-pwnagotchi plugins list -i --installed -h --help
-pwnagotchi plugins install -h --help
-pwnagotchi plugins uninstall -h --help
-pwnagotchi plugins enable -h --help
-pwnagotchi plugins disable -h --help
-pwnagotchi plugins update -h --help
-pwnagotchi plugins upgrade -h --help
-pwnagotchi google -h --help {login,refresh}
-pwnagotchi google login -h --help
-pwnagotchi google refresh -h --help
-"
-    COMPREPLY=()
-    cur="${COMP_WORDS[COMP_CWORD]}"
-    # shellcheck disable=SC2124
-    cmd="${COMP_WORDS[@]:0:${#COMP_WORDS[@]}-1}"
-    opt_line="$(grep -m1 "$cmd" <<<"$all_options")"
-    if [[ ${cur} == -* ]] ; then
-        opts="$(echo "$opt_line" | tr ' ' '\n' | awk '/^ *-/{gsub("[^a-zA-Z0-9-]","",$1);print $1}')"
-        # shellcheck disable=SC2207
-        COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
-        return 0
-    fi
-
-    # shellcheck disable=SC2086
-    opts="$(echo $opt_line | grep -Po '{\K[^}]+' | tr ',' '\n')"
-    # shellcheck disable=SC2207
-    COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
-}
-
-complete -F _show_complete pwnagotchi

builder/data/32bit/etc/profile

@@ -1,40 +0,0 @@
-# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
-# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
-
-if [ "$(id -u)" -eq 0 ]; then
-  PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-else
-  PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games"
-fi
-export PATH
-
-if [ "${PS1-}" ]; then
-  if [ "${BASH-}" ] && [ "$BASH" != "/bin/sh" ]; then
-    # The file bash.bashrc already sets the default PS1.
-    # PS1='\h:\w\$ '
-    if [ -f /etc/bash.bashrc ]; then
-      . /etc/bash.bashrc
-    fi
-  else
-    if [ "$(id -u)" -eq 0 ]; then
-      PS1='# '
-    else
-      PS1='$ '
-    fi
-  fi
-fi
-
-if [ -d /etc/profile.d ]; then
-  for i in /etc/profile.d/*.sh; do
-    if [ -r $i ]; then
-      . $i
-    fi
-  done
-  unset i
-fi
-alias custom='cd /usr/local/share/pwnagotchi/custom-plugins/'
-alias config='sudo nano /etc/pwnagotchi/config.toml'
-alias pwnlog='tail -f -n300 /etc/pwnagotchi/log/pwnagotchi.log | sed --unbuffered "s/,[[:digit:]]\\{3\\}\\]//g" | cut -d " " -f 2-'
-alias pwnver='python3 -c "import pwnagotchi as p; print(p.__version__)"'
-alias pwnkill='sudo killall -USR1 pwnagotchi'
-

builder/data/32bit/etc/systemd/system/pwnagotchi.service

@@ -1,19 +0,0 @@
-[Unit]
-Description=pwnagotchi Deep Reinforcement Learning instrumenting bettercap for WiFI pwning.
-Documentation=https://pwnagotchi.ai
-Wants=network.target
-After=pwngrid-peer.service
-
-[Service]
-Type=simple
-WorkingDirectory=~
-ExecStart=/usr/bin/pwnagotchi-launcher
-Restart=always
-RestartSec=30
-TasksMax=infinity
-LimitNPROC=infinity
-StandardOutput=null
-StandardError=null
-
-[Install]
-WantedBy=multi-user.target

builder/data/32bit/etc/update-motd.d/01-motd

@@ -1,34 +0,0 @@
-#!/bin/sh
-_hostname=$(hostname)
-_version=$(cut -d"'" -f2 < /usr/local/lib/python3.9/dist-packages/pwnagotchi/_version.py)
-echo
-echo "(◕‿‿◕) $_hostname"
-echo
-echo "    Hi! I'm a pwnagotchi $_version, please take good care of me!"
-echo "    Here are some basic things you need to know to raise me properly!"
-echo
-echo "    If you want to change my configuration, use /etc/pwnagotchi/config.toml"
-echo "    All plugin config files are located in /etc/pwnagotchi/conf.d/"
-echo "    Read the readme if you want to use gdrivesync plugin!!"
-echo
-echo "    All the configuration options can be found on /etc/pwnagotchi/default.toml,"
-echo "    but don't change this file because I will recreate it every time I'm restarted!"
-echo
-echo "    I use oPwnGrid as my main API, you can check stats at https://opwngrid.xyz"
-echo
-echo "    I'm managed by systemd. Here are some basic commands."
-echo
-echo "    If you want to know what I'm doing, you can check my logs with the command"
-echo "    - pwnlog"
-echo "    - sudo pwnagotchi --wizard, to help set up a config.toml"
-echo "    - sudo pwnagotchi --version, to check the current version"
-echo "    - sudo pwnagotchi --donate, to see how you can donate to this project"
-echo "    - sudo pwnagotchi --check-update, to see if there is a new version available"
-echo
-echo "    If you want to know if I'm running, you can use"
-echo "    sudo systemctl status pwnagotchi"
-echo
-echo "    You can restart me using"
-echo "    pwnkill"
-echo
-echo "    You can learn more about me at https://pwnagotchi.org/"

builder/data/32bit/usr/bin/bettercap-launcher

@@ -1,25 +0,0 @@
-#!/usr/bin/env bash
-source /usr/bin/pwnlib
-
-# we need to decrypt something
-if is_crypted_mode; then
-  while ! is_decrypted; do
-    echo "Waiting for decryption..."
-    sleep 1
-  done
-fi
-
-# check if wifi driver is bugged
-if ! check_brcm; then
-  if ! reload_brcm; then
-    echo "Could not reload wifi driver. Reboot"
-    reboot
-  fi
-  sleep 10
-fi
-
-if is_auto_mode_no_delete; then
-  /usr/local/bin/bettercap -no-colors -caplet pwnagotchi-auto -iface wlan0mon
-else
-  /usr/local/bin/bettercap -no-colors -caplet pwnagotchi-manual -iface wlan0mon
-fi

builder/data/32bit/usr/bin/decryption-webserver

@@ -1,149 +0,0 @@
-#!/usr/bin/env python3
-
-from http.server import HTTPServer, BaseHTTPRequestHandler
-from urllib.parse import parse_qsl
-
-
-_HTML_FORM_TEMPLATE = """
-<!DOCTYPE html>
-<html>
-<head>
-  <title>Decryption</title>
-  <style>
-    body {{ text-align: center; padding: 150px; }}
-    h1 {{ font-size: 50px; }}
-    body {{ font: 20px Helvetica, sans-serif; color: #333; }}
-    article {{ display: block; text-align: center; width: 650px; margin: 0 auto;}}
-    input {{
-      padding: 12px 20px;
-      margin: 8px 0;
-      box-sizing: border-box;
-      border: 1px solid #ccc;
-    }}
-    input[type=password] {{
-      width: 75%;
-      font-size: 24px;
-    }}
-    input[type=submit] {{
-      cursor: pointer;
-      width: 75%;
-    }}
-    input[type=submit]:hover {{
-      background-color: #d9d9d9;
-    }}
-  </style>
-</head>
-<body>
-  <article>
-      <h1>Decryption</h1>
-      <p>Some of your files are encrypted.</p>
-      <p>Please provide the decryption password.</p>
-      <div>
-        <form action="/set-password" method="POST">
-          {password_fields}
-          <input type="submit" value="Submit">
-        </form>
-      </div>
-  </article>
-</body>
-</html>
-"""
-
-POST_RESPONSE = """
-<!DOCTYPE html>
-<html>
-<head>
-<meta name="viewport" content="width=device-width, initial-scale=1">
-<style>
-/* Center the loader */
-#loader {
-  position: absolute;
-  left: 50%;
-  top: 50%;
-  z-index: 1;
-  width: 150px;
-  height: 150px;
-  margin: -75px 0 0 -75px;
-  border: 16px solid #f3f3f3;
-  border-radius: 50%;
-  border-top: 16px solid #3498db;
-  width: 120px;
-  height: 120px;
-  -webkit-animation: spin 2s linear infinite;
-  animation: spin 2s linear infinite;
-}
-
-@-webkit-keyframes spin {
-  0% { -webkit-transform: rotate(0deg); }
-  100% { -webkit-transform: rotate(360deg); }
-}
-
-@keyframes spin {
-  0% { transform: rotate(0deg); }
-  100% { transform: rotate(360deg); }
-}
-
-#myDiv {
-  display: none;
-  text-align: center;
-}
-</style>
-<script type="text/javascript">
-
-function checkPwnagotchi() {
-    var target = 'http://' + document.location.hostname + ':8080/';
-    var xhr = new XMLHttpRequest();
-    xhr.open('GET', target);
-    xhr.onreadystatechange = function () {
-        if (xhr.readyState == 4) {
-            if (xhr.status == 200 || xhr.status == 401) {
-                window.location.replace(target);
-            }else{
-                setTimeout(checkPwnagotchi, 1000);
-            }
-        }
-    };
-    xhr.send();
-}
-
-setTimeout(checkPwnagotchi, 1000);
-
-</script>
-</head>
-<body style="margin:0;">
-
-<div id="loader"></div>
-
-</body>
-</html>
-"""
-
-HTML_FORM = None
-
-
-class SimpleHTTPRequestHandler(BaseHTTPRequestHandler):
-
-    def do_GET(self):
-        self.send_response(200)
-        self.end_headers()
-        self.wfile.write(HTML_FORM.encode())
-
-    def do_POST(self):
-        content_length = int(self.headers['Content-Length'])
-        body = self.rfile.read(content_length)
-        for mapping, password in parse_qsl(body.decode('UTF-8')):
-            with open('/tmp/.pwnagotchi-secret-{}'.format(mapping), 'wt') as pwfile:
-                pwfile.write(password)
-        self.send_response(200)
-        self.end_headers()
-        self.wfile.write(POST_RESPONSE.encode())
-
-
-with open('/root/.pwnagotchi-crypted') as crypted_file:
-    mappings = [line.split()[0] for line in crypted_file.readlines()]
-    fields = ''.join(['<label for="{m}">Passphrase for {m}:</label>\n<input type="password" id="{m}" name="{m}" value=""><br>'.format(m=m)
-              for m in mappings])
-    HTML_FORM = _HTML_FORM_TEMPLATE.format(password_fields=fields)
-
-httpd = HTTPServer(('0.0.0.0', 80), SimpleHTTPRequestHandler)
-httpd.serve_forever()

builder/data/32bit/usr/bin/pwnlib

@@ -1,184 +0,0 @@
-#!/usr/bin/env bash
-
-# check if brcm is stuck
-check_brcm() {
-  if [[ "$(journalctl -n10 -k --since -5m | grep -c 'brcmf_cfg80211_nexmon_set_channel.*Set Channel failed')" -ge 5 ]]; then
-    return 1
-  fi
-  return 0
-}
-
-# reload mod
-reload_brcm() {
-  if ! modprobe -r brcmfmac; then
-    return 1
-  fi
-  sleep 1
-  if ! modprobe brcmfmac; then
-    return 1
-  fi
-  sleep 2
-  iw dev wlan0 set power_save off
-  return 0
-}
-
-# starts mon0
-start_monitor_interface() {
-  rfkill unblock all
-  ifconfig wlan0 up
-  iw dev wlan0 set power_save off
-  iw phy "$(iw phy | head -1 | cut -d" " -f2)" interface add wlan0mon type monitor
-  rfkill unblock all
-  ifconfig wlan0 down
-  ifconfig wlan0mon up
-  iw dev wlan0mon set power_save off
-}
-
-# stops mon0
-stop_monitor_interface() {
-  ifconfig wlan0mon down && iw dev wlan0mon del
-  reload_brcm
-  ifconfig wlan0 up
-}
-
-# returns 0 if the specificed network interface is up
-is_interface_up() {
-  if grep -qi 'up' /sys/class/net/"$1"/operstate; then
-    return 0
-  fi
-  return 1
-}
-
-# returns 0 if conditions for AUTO mode are met
-is_auto_mode() {
-  # check override file first
-  if [ -f /root/.pwnagotchi-manual ]; then
-    # remove the override file if found
-    rm -rf /root/.pwnagotchi-manual
-    return 1
-  fi
-
-  # check override file first
-  if [ -f /root/.pwnagotchi-auto ]; then
-    # remove the override file if found
-    rm -rf /root/.pwnagotchi-auto
-    return 0
-  fi
-
-  # if usb0 is up, we're in MANU
-  if is_interface_up usb0; then
-    return 1
-  fi
-
-  # if eth0 is up (for other boards), we're in MANU
-  if is_interface_up eth0; then
-    return 0
-  fi
-
-  # no override, but none of the interfaces is up -> AUTO
-  return 0
-}
-
-# returns 0 if conditions for AUTO mode are met
-is_auto_mode_no_delete() {
-  # check override file first
-  if [ -f /root/.pwnagotchi-manual ]; then
-    return 1
-  fi
-
-  # check override file first
-  if [ -f /root/.pwnagotchi-auto ]; then
-    return 0
-  fi
-
-  # if usb0 is up, we're in MANU
-  if is_interface_up usb0; then
-    return 1
-  fi
-
-  # if eth0 is up (for other boards), we're in MANU
-  if is_interface_up eth0; then
-    return 0
-  fi
-
-  # no override, but none of the interfaces is up -> AUTO
-  return 0
-}
-
-# check if we need to decrypt something
-is_crypted_mode() {
-  if [ -f /root/.pwnagotchi-crypted ]; then
-    return 0
-  fi
-  return 1
-}
-
-# decryption loop
-is_decrypted() {
-  while read -r mapping container mount; do
-    # mapping   = name the device or file will be mapped to
-    # container = the luks encrypted device or file
-    # mount     = the mountpoint
-
-    # fail if not mounted
-    if ! mountpoint -q "$mount" >/dev/null 2>&1; then
-      if [ -f /tmp/.pwnagotchi-secret-"$mapping" ]; then
-        </tmp/.pwnagotchi-secret-"$mapping" read -r SECRET
-        if ! test -b /dev/disk/by-id/dm-uuid-*"$(cryptsetup luksUUID "$container" | tr -d -)"*; then
-          if echo -n "$SECRET" | cryptsetup luksOpen -d- "$container" "$mapping" >/dev/null 2>&1; then
-            echo "Container decrypted!"
-          fi
-        fi
-
-        if mount /dev/mapper/"$mapping" "$mount" >/dev/null 2>&1; then
-            echo "Mounted /dev/mapper/$mapping to $mount"
-            continue
-        fi
-      fi
-
-      if ! ip -4 addr show wlan0 | grep inet >/dev/null 2>&1; then
-        >/dev/null 2>&1 ip addr add 192.168.0.10/24 dev wlan0
-      fi
-
-      if ! pgrep -f decryption-webserver >/dev/null 2>&1; then
-        >/dev/null 2>&1 decryption-webserver &
-      fi
-
-      if ! pgrep wpa_supplicant >/dev/null 2>&1; then
-        >/tmp/wpa_supplicant.conf cat <<EOF
-ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
-update_config=1
-ap_scan=2
-
-network={
-    ssid="DECRYPT-ME"
-    mode=2
-    key_mgmt=WPA-PSK
-    psk="pwnagotchi"
-    frequency=2437
-}
-EOF
-        >/dev/null 2>&1 wpa_supplicant -u -s -O -D nl80211 -i wlan0 -c /tmp/wpa_supplicant.conf &
-      fi
-
-      if ! pgrep dnsmasq >/dev/null 2>&1; then
-        >/dev/null 2>&1 dnsmasq -k -p 53 -h -O "6,192.168.0.10" -A "/#/192.168.0.10" -i wlan0 -K -F 192.168.0.50,192.168.0.60,255.255.255.0,24h &
-      fi
-
-      return 1
-    fi
-  done </root/.pwnagotchi-crypted
-
-  # overwrite passwords
-  python3 -c 'print("A"*4096)' | tee /tmp/.pwnagotchi-secret-* >/dev/null
-  # delete
-  rm /tmp/.pwnagotchi-secret-*
-  sync # flush
-
-  pkill wpa_supplicant
-  pkill dnsmasq
-  pid="$(pgrep -f "decryption-webserver")"
-  [[ -n "$pid" ]] && kill "$pid"
-
-  return 0
-}

builder/data/64bit/etc/NetworkManager/NetworkManager.conf

@@ -1,5 +0,0 @@
-[main]
-plugins=keyfile,ifupdown
-
-[ifupdown]
-managed=true

builder/data/64bit/etc/dphys-swapfile

@@ -1,26 +0,0 @@
-# /etc/dphys-swapfile - user settings for dphys-swapfile package
-# author Neil Franklin, last modification 2010.05.05
-# copyright ETH Zuerich Physics Departement
-#   use under either modified/non-advertising BSD or GPL license
-
-# this file is sourced with . so full normal sh syntax applies
-
-# the default settings are added as commented out CONF_*=* lines
-
-
-# where we want the swapfile to be, this is the default
-#CONF_SWAPFILE=/var/swap
-
-# set size to absolute value, leaving empty (default) then uses computed value
-#   you most likely don't want this, unless you have an special disk situation
-CONF_SWAPSIZE=2048
-
-# set size to computed value, this times RAM size, dynamically adapts,
-#   guarantees that there is enough swap without wasting disk space on excess
-#CONF_SWAPFACTOR=2
-
-# restrict size (computed and absolute!) to maximally this limit
-#   can be set to empty for no limit, but beware of filled partitions!
-#   this is/was a (outdated?) 32bit kernel limit (in MBytes), do not overrun it
-#   but is also sensible on 64bit to prevent filling /var or even / partition
-#CONF_MAXSWAP=2048

builder/data/64bit/etc/modules-load.d/modules.conf

@@ -1,6 +0,0 @@
-# /etc/modules: kernel modules to load at boot time.
-#
-# This file contains the names of kernel modules that should be loaded
-# at boot time, one per line. Lines beginning with "#" are ignored.
-# Parameters can be specified after the module name.
-i2c-dev

builder/data/64bit/etc/network/interfaces.d/eth0-cfg

@@ -1,2 +0,0 @@
-allow-hotplug eth0
-iface eth0 inet dhcp

builder/data/64bit/etc/network/interfaces.d/lo-cfg

@@ -1,2 +0,0 @@
-auto lo
-iface lo inet loopback

builder/data/64bit/etc/network/interfaces.d/usb0-cfg

@@ -1,8 +0,0 @@
-allow-hotplug usb0
-iface usb0 inet static
-  address 10.0.0.2
-  netmask 255.255.255.0
-  network 10.0.0.0
-  broadcast 10.0.0.255
-  gateway 10.0.0.1
-  metric 101

builder/data/64bit/etc/network/interfaces.d/wlan0-cfg

@@ -1,2 +0,0 @@
-allow-hotplug wlan0
-iface wlan0 inet static

builder/data/64bit/etc/profile

@@ -1,40 +0,0 @@
-# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
-# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
-
-if [ "$(id -u)" -eq 0 ]; then
-  PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-else
-  PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games"
-fi
-export PATH
-
-if [ "${PS1-}" ]; then
-  if [ "${BASH-}" ] && [ "$BASH" != "/bin/sh" ]; then
-    # The file bash.bashrc already sets the default PS1.
-    # PS1='\h:\w\$ '
-    if [ -f /etc/bash.bashrc ]; then
-      . /etc/bash.bashrc
-    fi
-  else
-    if [ "$(id -u)" -eq 0 ]; then
-      PS1='# '
-    else
-      PS1='$ '
-    fi
-  fi
-fi
-
-if [ -d /etc/profile.d ]; then
-  for i in /etc/profile.d/*.sh; do
-    if [ -r $i ]; then
-      . $i
-    fi
-  done
-  unset i
-fi
-alias custom='cd /usr/local/share/pwnagotchi/custom-plugins/'
-alias config='sudo nano /etc/pwnagotchi/config.toml'
-alias pwnlog='tail -f -n300 /etc/pwnagotchi/log/pwnagotchi.log | sed --unbuffered "s/,[[:digit:]]\\{3\\}\\]//g" | cut -d " " -f 2-'
-alias pwnver='python3 -c "import pwnagotchi as p; print(p.__version__)"'
-alias pwnkill='sudo killall -USR1 pwnagotchi'
-

builder/data/64bit/etc/rc.local

@@ -1,16 +0,0 @@
-#!/bin/sh -e
-#
-# rc.local
-#
-# This script is executed at the end of each multiuser runlevel.
-# Make sure that the script will "exit 0" on success or any other
-# value on error.
-#
-# In order to enable or disable this script just change the execution
-# bits.
-#
-# By default this script does nothing.
-
-timedatectl set-ntp true
-
-exit 0

builder/data/64bit/etc/systemd/system/bettercap.service

@@ -1,13 +0,0 @@
-[Unit]
-Description=bettercap api.rest service.
-Documentation=https://bettercap.org
-Wants=network.target
-
-[Service]
-Type=simple
-ExecStart=/usr/bin/bettercap-launcher
-Restart=always
-RestartSec=30
-
-[Install]
-WantedBy=multi-user.target

builder/data/64bit/etc/systemd/system/bluetooth.service

@@ -1,20 +0,0 @@
-[Unit]
-Description=Bluetooth service
-Documentation=man:bluetoothd(8)
-ConditionPathIsDirectory=/sys/class/bluetooth
-
-[Service]
-Type=dbus
-BusName=org.bluez
-ExecStart=/usr/libexec/bluetooth/bluetoothd --noplugin=sap,a2dp
-NotifyAccess=main
-#WatchdogSec=10
-#Restart=on-failure
-CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
-LimitNPROC=1
-ProtectHome=true
-ProtectSystem=full
-
-[Install]
-WantedBy=bluetooth.target
-Alias=dbus-org.bluez.service

builder/data/64bit/etc/systemd/system/pwngrid-peer.service

@@ -1,16 +0,0 @@
-[Unit]
-Description=pwngrid peer service.
-Documentation=https://pwnagotchi.ai
-Wants=network.target
-After=bettercap.service
-
-[Service]
-Environment=LD_PRELOAD=/usr/local/lib/libpcap.so.1
-Environment=LD_LIBRARY_PATH=/usr/local/lib
-Type=simple
-ExecStart=/usr/local/bin/pwngrid -keys /etc/pwnagotchi -peers /root/peers -address 127.0.0.1:8666 -client-token /root/.api-enrollment.json -wait -log /etc/pwnagotchi/log/pwngrid-peer.log -iface wlan0mon
-Restart=always
-RestartSec=30
-
-[Install]
-WantedBy=multi-user.target

builder/data/64bit/root/settings.yaml

@@ -1,15 +0,0 @@
-client_config_backend: file
-client_config_file: /root/client_secrets.json
-client_config:
-    client_id: <YOUR CLIENT ID>
-    client_secret: <YOUR CLIENT SECRET>
-
-save_credentials: True
-save_credentials_backend: file
-save_credentials_file: /root/credentials.json
-
-get_refresh_token: True
-
-oauth_scope:
-    - https://www.googleapis.com/auth/drive
-    - https://www.googleapis.com/auth/drive.install

builder/data/64bit/usr/bin/hdmioff

@@ -1,2 +0,0 @@
-#!/usr/bin/env bash
-sudo /usr/bin/tvservice -o

builder/data/64bit/usr/bin/hdmion

@@ -1,2 +0,0 @@
-#!/usr/bin/env bash
-sudo /usr/bin/tvservice -p

builder/data/64bit/usr/bin/monstart

@@ -1,3 +0,0 @@
-#!/usr/bin/env bash
-source /usr/bin/pwnlib
-start_monitor_interface

builder/data/64bit/usr/bin/monstop

@@ -1,3 +0,0 @@
-#!/usr/bin/env bash
-source /usr/bin/pwnlib
-stop_monitor_interface

builder/data/64bit/usr/bin/pwnagotchi-launcher

@@ -1,17 +0,0 @@
-#!/usr/bin/env bash
-source /usr/bin/pwnlib
-
-# we need to decrypt something
-if is_crypted_mode; then
-  while ! is_decrypted; do
-    echo "Waiting for decryption..."
-    sleep 1
-  done
-fi
-
-if is_auto_mode; then
-  /usr/local/bin/pwnagotchi
-  systemctl restart bettercap
-else
-  /usr/local/bin/pwnagotchi --manual
-fi

builder/data/usr/bin/bettercap-launcher

@@ -9,6 +9,8 @@ if is_crypted_mode; then
   done
 fi
 
+start_monitor_interface
+
 if is_auto_mode_no_delete; then
   /usr/local/bin/bettercap -no-colors -caplet pwnagotchi-auto -iface wlan0mon
 else

builder/data/usr/bin/pwnagotchi-launcher

@@ -10,8 +10,8 @@ if is_crypted_mode; then
 fi
 
 if is_auto_mode; then
-  /usr/local/bin/pwnagotchi
+  /usr/local/src/pwnagotchi/env/bin/pwnagotchi
   systemctl restart bettercap
 else
-  /usr/local/bin/pwnagotchi --manual
+  /usr/local/src/pwnagotchi/env/bin/pwnagotchi --manual
 fi

pwnagotchi/agent.py

@@ -6,6 +6,7 @@ import logging
 import asyncio
 #import _thread
 import threading
+import subprocess
 
 import pwnagotchi
 import pwnagotchi.utils as utils

pwnagotchi/ai/gym.py

@@ -51,7 +51,7 @@ class Environment(gym.Env):
             'state_v': None
         }
 
-        self.action_space = spaces.MultiDiscrete([p.space_size() for p in Environment.params if p.trainable])
+        self.action_space = spaces.multi_discrete.MultiDiscrete([p.space_size() for p in Environment.params if p.trainable])
         self.observation_space = spaces.Box(low=0, high=1, shape=featurizer.shape, dtype=np.float32)
         self.reward_range = reward.range
 

pwnagotchi/locale/is/LC_MESSAGES/voice.po

@@ -1,16 +1,16 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# Icelandic Translation.
+# Copyright (C) 2019
+# This file is distributed under the same license as the pwnagotchi package..
+# Sean Duggan <sean.duggan@pm.me>, 2024.
 #
-
+#, fuzzy
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-16 21:10+0100\n"
+"POT-Creation-Date: 2024-11-17 20:51+0100\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Last-Translator: FULL NAME <sean.duggan@pm.me>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: Icelandic\n"
 "MIME-Version: 1.0\n"
@@ -18,218 +18,219 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 
 msgid "ZzzzZZzzzzZzzz"
-msgstr ""
+msgstr "ZzzzZZzzzzZzzz"
 
 msgid "Hi, I'm Pwnagotchi! Starting ..."
-msgstr ""
+msgstr "Hæ, Ég heiti Pwnagotchi! Ræsi.."
 
 msgid "New day, new hunt, new pwns!"
-msgstr ""
+msgstr "Nýr dagur, Ný veiði, Ný pwns!"
 
 msgid "Hack the Planet!"
-msgstr ""
+msgstr "Hakkaðu plánetuna!"
 
 msgid "AI ready."
-msgstr ""
+msgstr "AI tilbúið."
 
 msgid "The neural network is ready."
-msgstr ""
+msgstr "Tauganetið er tilbúið."
 
 msgid "Generating keys, do not turn off ..."
-msgstr ""
+msgstr "Bý til lykla, ekki slökkva á."
 
 #, python-brace-format
 msgid "Hey, channel {channel} is free! Your AP will say thanks."
-msgstr ""
+msgstr "Hæ, Rás {channel} er líka ókeypis! AP þinn mun þakka fyrir."
 
 msgid "Reading last session logs ..."
-msgstr ""
+msgstr "Les fyrri leiðarbók..."
 
 #, python-brace-format
 msgid "Read {lines_so_far} log lines so far ..."
-msgstr ""
+msgstr "Ég las {lines_so_far} leiðarbók línur hingað til..."
 
 msgid "I'm bored ..."
-msgstr ""
+msgstr "Mér leiðist ..."
 
 msgid "Let's go for a walk!"
-msgstr ""
+msgstr "Förum í göngutúr!"
 
 msgid "This is the best day of my life!"
-msgstr ""
+msgstr "Þetta er besti dagur lífs míns!"
 
 msgid "Shitty day :/"
-msgstr ""
+msgstr "Skítadagur :/"
 
 msgid "I'm extremely bored ..."
-msgstr ""
+msgstr "Mér leiðist óskaplega mikið ..."
 
 msgid "I'm very sad ..."
-msgstr ""
+msgstr "Ég er mjög leiður ..."
 
 msgid "I'm sad"
-msgstr ""
+msgstr "Ég er leiður"
 
 msgid "Leave me alone ..."
-msgstr ""
+msgstr "Láttu mig í friði ..."
 
 msgid "I'm mad at you!"
-msgstr ""
+msgstr "Ég er reiður út í þig!"
 
 msgid "I'm living the life!"
-msgstr ""
+msgstr "Ég lifi besta lífi!"
 
 msgid "I pwn therefore I am."
-msgstr ""
+msgstr "Ég pwn þess vegna er ég."
 
 msgid "So many networks!!!"
-msgstr ""
+msgstr "Svo mörg net!!!"
 
 msgid "I'm having so much fun!"
-msgstr ""
+msgstr "Mér finnst svo gaman!"
 
 msgid "My crime is that of curiosity ..."
-msgstr ""
+msgstr "Glæpur minn er forvitni ..."
 
 #, python-brace-format
 msgid "Hello {name}! Nice to meet you."
-msgstr ""
+msgstr "Hæ {name}! Gaman að hitta þig!"
 
 #, python-brace-format
 msgid "Yo {name}! Sup?"
-msgstr ""
+msgstr "Yo {name}! Sup?"
 
 #, python-brace-format
 msgid "Hey {name} how are you doing?"
-msgstr ""
+msgstr "Hæ {name} Hvernig hefurðu það?"
 
 #, python-brace-format
 msgid "Unit {name} is nearby!"
-msgstr ""
+msgstr "Tæki {name} er nálægt!"
 
 #, python-brace-format
 msgid "Uhm ... goodbye {name}"
-msgstr ""
+msgstr "Uhm ... bless {name}"
 
 #, python-brace-format
 msgid "{name} is gone ..."
-msgstr ""
+msgstr "{name} er farinn ..."
 
 #, python-brace-format
 msgid "Whoops ... {name} is gone."
-msgstr ""
+msgstr "Úps ... {name} er farinn."
 
 #, python-brace-format
 msgid "{name} missed!"
-msgstr ""
+msgstr "{name} saknað!'"
 
 msgid "Missed!"
-msgstr ""
+msgstr "Saknað!'"
 
 msgid "Good friends are a blessing!"
-msgstr ""
+msgstr "Góðir vinir eru blessun!"
 
 msgid "I love my friends!"
-msgstr ""
+msgstr "Ég elska vini mína!"
 
 msgid "Nobody wants to play with me ..."
-msgstr ""
+msgstr "Enginn vill leika við mig ..."
 
 msgid "I feel so alone ..."
-msgstr ""
+msgstr "Mér finnst ég vera svo ein ..."
 
 msgid "Where's everybody?!"
-msgstr ""
+msgstr "Hvar eru allir?!"
 
 #, python-brace-format
 msgid "Napping for {secs}s ..."
-msgstr ""
+msgstr "Sef í {secs}s ..."
 
 msgid "Zzzzz"
-msgstr ""
+msgstr "Zzzzz"
 
 #, python-brace-format
 msgid "ZzzZzzz ({secs}s)"
-msgstr ""
+msgstr "ZzzZzzz ({secs})"
 
 msgid "Good night."
-msgstr ""
+msgstr "Góða nótt."
 
 msgid "Zzz"
-msgstr ""
+msgstr "Zzz"
 
 #, python-brace-format
 msgid "Waiting for {secs}s ..."
-msgstr ""
+msgstr "Bíð eftir {secs} ..."
 
 #, python-brace-format
 msgid "Looking around ({secs}s)"
-msgstr ""
+msgstr "Horfi í kringum mig ({secs}s)"
 
 #, python-brace-format
 msgid "Hey {what} let's be friends!"
-msgstr ""
+msgstr "Hæ {what} við skulum vera vinir!"
 
 #, python-brace-format
 msgid "Associating to {what}"
-msgstr ""
+msgstr "Tengist við {what}"
 
 #, python-brace-format
 msgid "Yo {what}!"
-msgstr ""
+msgstr "Yo {what}!"
 
 #, python-brace-format
 msgid "Just decided that {mac} needs no WiFi!"
-msgstr ""
+msgstr "Ég ákvað að {mac} þurfi ekki WiFi!"
 
 #, python-brace-format
 msgid "Deauthenticating {mac}"
-msgstr ""
+msgstr "Afvotta {mac}"
 
 #, python-brace-format
 msgid "Kickbanning {mac}!"
-msgstr ""
+msgstr "Sparkbanna {mac}!"
 
 #, python-brace-format
 msgid "Cool, we got {num} new handshake{plural}!"
-msgstr ""
+msgstr "Flott! við fengum {num} ný handatök {plural}!"
 
 #, python-brace-format
 msgid "You have {count} new message{plural}!"
-msgstr ""
+msgstr "þú hefur {count} ný skilaboð!"
 
 msgid "Oops, something went wrong ... Rebooting ..."
-msgstr ""
+msgstr "Oops, eitthvað brotnaði ... Endurræsi ..."
 
 #, python-brace-format
 msgid "Uploading data to {to} ..."
-msgstr ""
+msgstr "Hleð upp gögnum til {to} ..."
 
-#, python-brace-format
+#, fuzzy, python-brace-format
 msgid "Downloading from {name} ..."
-msgstr ""
+msgstr "Hleð upp gögnum til {to} ..."
 
 #, python-brace-format
 msgid "Kicked {num} stations\n"
-msgstr ""
+msgstr "Sparkaði {num} stöðvar\n"
 
+#, fuzzy
 msgid "Made >999 new friends\n"
-msgstr ""
+msgstr "Eignaðist {num} nýja vini\n"
 
 #, python-brace-format
 msgid "Made {num} new friends\n"
-msgstr ""
+msgstr "Eignaðist {num} nýja vini\n"
 
 #, python-brace-format
 msgid "Got {num} handshakes\n"
-msgstr ""
+msgstr "Fékk {num} ný handabönd\n"
 
 msgid "Met 1 peer"
-msgstr ""
+msgstr "Hitti 1 jafningja"
 
 #, python-brace-format
 msgid "Met {num} peers"
-msgstr ""
+msgstr "Hitti {num} jafningja"
 
 #, python-brace-format
 msgid ""
@@ -237,21 +238,24 @@ msgid ""
 "{associated} new friends and ate {handshakes} handshakes! #pwnagotchi "
 "#pwnlog #pwnlife #hacktheplanet #skynet"
 msgstr ""
+"Ég hef verið að pwna í {duration} og sparkað {deauthed} viðskiptavinum! Ég "
+"hef líka hitt  {associated} nýja vini og borðað {handshakes} handabönd! "
+"#pwnagotchi #pwnlog #pwnlife #hacktheplanet #skynet"
 
 msgid "hours"
-msgstr ""
+msgstr "klukkustundir"
 
 msgid "minutes"
-msgstr ""
+msgstr "mínútur"
 
 msgid "seconds"
-msgstr ""
+msgstr "sekúndur"
 
 msgid "hour"
-msgstr ""
+msgstr "klukkustund"
 
 msgid "minute"
-msgstr ""
+msgstr "mínútu"
 
 msgid "second"
-msgstr ""
+msgstr "sekúndu"

pwnagotchi/locale/voice.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-02-16 15:26-0300\n"
+"POT-Creation-Date: 2024-11-17 20:51+0100\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"

pyproject.toml

@@ -33,7 +33,7 @@ dependencies = [
     "tweepy",
     "websockets",
 ]
-requires-python = ">=3.9"
+requires-python = ">=3.10"
 authors = [
   {name = "Evilsocket", email = "evilsocket@gmail.com"},
   {name = "Jayofelony", email = "oudshoorn.jeroen@gmail.com"}

setup.py

@@ -41,10 +41,7 @@ def install_system_files():
             os.system(f"apt-get install -y {x}")
         f.close()
     setup_path = os.path.dirname(__file__)
-    if platform.machine().startswith('arm'):
-        data_path = os.path.join(setup_path, "builder/data/32bit")
-    elif platform.machine().startswith('aarch'):
-        data_path = os.path.join(setup_path, "builder/data/64bit")
+    data_path = os.path.join(setup_path, "builder/data")
 
     for source_filename in glob.glob("%s/**" % data_path, recursive=True):
         if os.path.isfile(source_filename):