Update faces.py

Signed-off-by: jayofelony <oudshoorn.jeroen@gmail.com>

.github/FUNDING.yml

@@ -1,3 +1,4 @@
 # These are supported funding model platforms
 
 github: jayofelony
+custom: https://tikkie.me/pay/dubcto94hnskg539kar0

.github/workflows/publish.yml

@@ -23,8 +23,6 @@ jobs:
       - name: Get latest tag
         uses: actions-ecosystem/action-get-latest-tag@v1
         id: get-latest-tag
-        with:
-          token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Set LAST_VERSION as an environment variable
         run: echo "LAST_VERSION=${{ steps.get-latest-tag.outputs.tag }}" >> $GITHUB_ENV

Makefile

@@ -51,13 +51,11 @@ image: clean packer
 
 bullseye: clean packer
 	export LC_ALL=en_GB.UTF-8
-	cd builder && sudo /usr/bin/packer init data/32bit/raspberrypi32.json.pkr.hcl && sudo $(UNSHARE) /usr/bin/packer build -var "pwn_hostname=$(PWN_HOSTNAME)" -var "pwn_version=$(PWN_VERSION)" data/32bit/raspberrypi32.json.pkr.hcl
+	cd builder && sudo /usr/bin/packer init raspberrypi32.json.pkr.hcl && sudo $(UNSHARE) /usr/bin/packer build -var "pwn_hostname=$(PWN_HOSTNAME)" -var "pwn_version=$(PWN_VERSION)" raspberrypi32.json.pkr.hcl
-	sudo pishrink -vaZ pwnagotchi-32bit.img
 
 bookworm: clean packer
 	export LC_ALL=en_GB.UTF-8
-	cd builder && sudo /usr/bin/packer init data/64bit/raspberrypi64.json.pkr.hcl && sudo $(UNSHARE) /usr/bin/packer build -var "pwn_hostname=$(PWN_HOSTNAME)" -var "pwn_version=$(PWN_VERSION)" data/64bit/raspberrypi64.json.pkr.hcl
+	cd builder && sudo /usr/bin/packer init raspberrypi64.json.pkr.hcl && sudo $(UNSHARE) /usr/bin/packer build -var "pwn_hostname=$(PWN_HOSTNAME)" -var "pwn_version=$(PWN_VERSION)" raspberrypi64.json.pkr.hcl
-	sudo pishrink -vaZ pwnagotchi-64bit.img
 
 clean:
 	- rm -rf /tmp/packer*

apt_packages.txt

@@ -0,0 +1 @@
+bluez-tools

builder/combined.json.pkr.hcl

@@ -123,7 +123,7 @@ build {
   provisioner "ansible-local" {
     command         = "ANSIBLE_FORCE_COLOR=1 PYTHONUNBUFFERED=1 PWN_VERSION=${var.pwn_version} PWN_HOSTNAME=${var.pwn_hostname} ansible-playbook"
     extra_arguments = ["--extra-vars \"ansible_python_interpreter=/usr/bin/python3\""]
-    playbook_file   = "data/64bit/raspberrypi64.yml"
+    playbook_file   = "raspberrypi64.yml"
   }
 }
 
@@ -167,7 +167,7 @@ build {
   provisioner "ansible-local" {
     command         = "ANSIBLE_FORCE_COLOR=1 PYTHONUNBUFFERED=1 PWN_VERSION=${var.pwn_version} PWN_HOSTNAME=${var.pwn_hostname} ansible-playbook"
     extra_arguments = ["--extra-vars \"ansible_python_interpreter=/usr/bin/python3\""]
-    playbook_dir    = "data/32bit/extras/"
+    playbook_dir    = "extras/"
-    playbook_file   = "data/32bit/raspberrypi32.yml"
+    playbook_file   = "raspberrypi32.yml"
   }
 }

builder/data/32bit/boot/config.txt

@@ -0,0 +1,67 @@
+# For more options and information see
+# http://rptl.io/configtxt
+# Some settings may impact device functionality. See link above for details
+
+# Uncomment some or all of these to enable the optional hardware interfaces
+#dtparam=i2c_arm=on
+#dtparam=i2s=on
+#dtparam=spi=on
+
+# Enable audio (loads snd_bcm2835)
+dtparam=audio=on
+
+# Additional overlays and parameters are documented
+# /boot/overlays/README
+
+# Automatically load overlays for detected cameras
+camera_auto_detect=1
+
+# Automatically load overlays for detected DSI displays
+display_auto_detect=1
+
+# Automatically load initramfs files, if found
+auto_initramfs=1
+
+# Enable DRM VC4 V3D driver
+dtoverlay=vc4-kms-v3d
+max_framebuffers=2
+
+# Don't have the firmware create an initial video= setting in cmdline.txt.
+# Use the kernel's default instead.
+disable_fw_kms_setup=1
+
+# Run in 64-bit mode
+arm_64bit=0
+
+# Disable compensation for displays with overscan
+disable_overscan=1
+
+# Run as fast as firmware / board allows
+arm_boost=1
+
+[cm4]
+# Enable host mode on the 2711 built-in XHCI USB controller.
+# This line should be removed if the legacy DWC2 controller is required
+# (e.g. for USB device mode) or if USB support is not required.
+otg_mode=1
+
+[all]
+dtoverlay=dwc2
+dtparam=i2c1=on
+dtparam=i2c_arm=on
+dtparam=spi=on
+gpu_mem=1
+dtoverlay=dwc2
+#dtoverlay=disable-wifi
+
+[pi0]
+dtoverlay=spi1-3cs
+#dtoverlay=disable-wifi
+
+[pi3]
+dtoverlay=spi1-3cs
+#dtoverlay=disable-wifi
+
+[pi4]
+dtoverlay=spi1-3cs
+#dtoverlay=disable-wifi

builder/data/32bit/etc/modules-load.d/modules.conf

@@ -0,0 +1,6 @@
+# /etc/modules: kernel modules to load at boot time.
+#
+# This file contains the names of kernel modules that should be loaded
+# at boot time, one per line. Lines beginning with "#" are ignored.
+# Parameters can be specified after the module name.
+i2c-dev

builder/data/32bit/etc/profile

@@ -0,0 +1,40 @@
+# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
+# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
+
+if [ "$(id -u)" -eq 0 ]; then
+  PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+else
+  PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games"
+fi
+export PATH
+
+if [ "${PS1-}" ]; then
+  if [ "${BASH-}" ] && [ "$BASH" != "/bin/sh" ]; then
+    # The file bash.bashrc already sets the default PS1.
+    # PS1='\h:\w\$ '
+    if [ -f /etc/bash.bashrc ]; then
+      . /etc/bash.bashrc
+    fi
+  else
+    if [ "$(id -u)" -eq 0 ]; then
+      PS1='# '
+    else
+      PS1='$ '
+    fi
+  fi
+fi
+
+if [ -d /etc/profile.d ]; then
+  for i in /etc/profile.d/*.sh; do
+    if [ -r $i ]; then
+      . $i
+    fi
+  done
+  unset i
+fi
+alias custom='cd /usr/local/share/pwnagotchi/custom-plugins/'
+alias config='sudo nano /etc/pwnagotchi/config.toml'
+alias pwnlog='tail -f -n300 /etc/pwnagotchi/log/pwn*.log | sed --unbuffered "s/,[[:digit:]]\\{3\\}\\]//g" | cut -d " " -f 2-'
+alias pwnver='python3 -c "import pwnagotchi as p; print(p.__version__)"'
+alias pwnkill='sudo killall -USR1 pwnagotchi'
+

builder/data/64bit/boot/firmware/config.txt

@@ -0,0 +1,70 @@
+# For more options and information see
+# http://rptl.io/configtxt
+# Some settings may impact device functionality. See link above for details
+
+# Uncomment some or all of these to enable the optional hardware interfaces
+#dtparam=i2c_arm=on
+#dtparam=i2s=on
+#dtparam=spi=on
+
+# Enable audio (loads snd_bcm2835)
+dtparam=audio=on
+
+# Additional overlays and parameters are documented
+# /boot/firmware/overlays/README
+
+# Automatically load overlays for detected cameras
+camera_auto_detect=1
+
+# Automatically load overlays for detected DSI displays
+display_auto_detect=1
+
+# Automatically load initramfs files, if found
+auto_initramfs=1
+
+# Enable DRM VC4 V3D driver
+dtoverlay=vc4-kms-v3d
+max_framebuffers=2
+
+# Don't have the firmware create an initial video= setting in cmdline.txt.
+# Use the kernel's default instead.
+disable_fw_kms_setup=1
+
+# Run in 64-bit mode
+arm_64bit=1
+
+# Disable compensation for displays with overscan
+disable_overscan=1
+
+# Run as fast as firmware / board allows
+arm_boost=1
+
+[cm4]
+# Enable host mode on the 2711 built-in XHCI USB controller.
+# This line should be removed if the legacy DWC2 controller is required
+# (e.g. for USB device mode) or if USB support is not required.
+otg_mode=1
+
+[all]
+dtparam=i2c1=on
+dtparam=i2c_arm=on
+dtparam=spi=on
+gpu_mem=1
+dtoverlay=dwc2
+#dtoverlay=disable-wifi
+
+[pi0]
+dtoverlay=spi0-0cs
+#dtoverlay=disable-wifi
+
+[pi3]
+dtoverlay=spi0-0cs
+#dtoverlay=disable-wifi
+
+[pi4]
+dtoverlay=spi0-0cs
+#dtoverlay=disable-wifi
+
+[pi5]
+dtoverlay=spi0-0cs
+#dtoverlay=disable-wifi

builder/data/64bit/etc/modules-load.d/modules.conf

@@ -0,0 +1,6 @@
+# /etc/modules: kernel modules to load at boot time.
+#
+# This file contains the names of kernel modules that should be loaded
+# at boot time, one per line. Lines beginning with "#" are ignored.
+# Parameters can be specified after the module name.
+i2c-dev

builder/data/64bit/etc/profile

@@ -0,0 +1,40 @@
+# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
+# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
+
+if [ "$(id -u)" -eq 0 ]; then
+  PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+else
+  PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games"
+fi
+export PATH
+
+if [ "${PS1-}" ]; then
+  if [ "${BASH-}" ] && [ "$BASH" != "/bin/sh" ]; then
+    # The file bash.bashrc already sets the default PS1.
+    # PS1='\h:\w\$ '
+    if [ -f /etc/bash.bashrc ]; then
+      . /etc/bash.bashrc
+    fi
+  else
+    if [ "$(id -u)" -eq 0 ]; then
+      PS1='# '
+    else
+      PS1='$ '
+    fi
+  fi
+fi
+
+if [ -d /etc/profile.d ]; then
+  for i in /etc/profile.d/*.sh; do
+    if [ -r $i ]; then
+      . $i
+    fi
+  done
+  unset i
+fi
+alias custom='cd /usr/local/share/pwnagotchi/custom-plugins/'
+alias config='sudo nano /etc/pwnagotchi/config.toml'
+alias pwnlog='tail -f -n300 /etc/pwnagotchi/log/pwn*.log | sed --unbuffered "s/,[[:digit:]]\\{3\\}\\]//g" | cut -d " " -f 2-'
+alias pwnver='python3 -c "import pwnagotchi as p; print(p.__version__)"'
+alias pwnkill='sudo killall -USR1 pwnagotchi'
+

builder/data/64bit/usr/bin/pwnlib

@@ -1,18 +1,5 @@
 #!/usr/bin/env bash
 
-# well ... it blinks the led
-blink_led() {
-  # shellcheck disable=SC2034
-  for i in $(seq 1 "$1"); do
-    echo 0 >/sys/class/leds/led0/brightness
-    sleep 0.3
-    echo 1 >/sys/class/leds/led0/brightness
-    sleep 0.3
-  done
-  echo 0 >/sys/class/leds/led0/brightness
-  sleep 0.3
-}
-
 # reload mod
 reload_brcm() {
   if ! modprobe -r brcmfmac; then

builder/raspberrypi32.json.pkr.hcl

@@ -88,7 +88,7 @@ build {
   provisioner "ansible-local" {
     command         = "ANSIBLE_FORCE_COLOR=1 PYTHONUNBUFFERED=1 PWN_VERSION=${var.pwn_version} PWN_HOSTNAME=${var.pwn_hostname} ansible-playbook"
     extra_arguments = ["--extra-vars \"ansible_python_interpreter=/usr/bin/python3\""]
-    playbook_dir    = "data/32bit/extras/"
+    playbook_dir    = "extras/"
-    playbook_file   = "data/32bit/raspberrypi32.yml"
+    playbook_file   = "raspberrypi32.yml"
   }
 }

builder/raspberrypi32.yml

@@ -39,26 +39,6 @@
       hostname: "{{ lookup('env', 'PWN_HOSTNAME') | default('pwnagotchi', true) }}"
       version: "{{ lookup('env', 'PWN_VERSION') | default('pwnagotchi-torch', true) }}"
       custom_plugin_dir: "/usr/local/share/pwnagotchi/custom-plugins"
-    system:
-      boot_options:
-        - "#### pwnagotchi additions"
-        - "# this pwnagotchi image is 32-bit only no v8+ headers to build nexmon for 64 bit"
-        - "arm_64bit=0"
-        - "# dwc2 for RNDIS. comment out, and remove dwc2 and g_ether from cmdline.txt for X306 usb battery hat"
-        - "dtoverlay=dwc2"
-        - "dtoverlay=spi0-0cs"
-        - "dtparam=i2c1=on"
-        - "dtparam=i2c_arm=on"
-        - "dtparam=spi=on"
-        - "gpu_mem=16"
-        - "#### audio out on pins 18 and 19"
-        - "#dtoverlay=audremap,pins_18_19"
-        - "#### touchscreen on waveshare touch e-paper"
-        - "#dtoverlay=goodix,interrupt=27,reset=22"
-        - "#### for PWM backlighting on pimoroni displayhatmini"
-        - "dtoverlay=pwm-2chan,pin=12,func=4,pin2=13,func2=4"
-      modules:
-        - "i2c-dev"
     services:
       enable:
         - bettercap.service
@@ -117,6 +97,7 @@
           - bc
           - bison
           - bluez
+          - bluez-tools
           - build-essential
           - curl
           - dkms
@@ -178,6 +159,7 @@
           - lsof
           - make
           - ntp
+          - python3-dbus
           - python3-flask
           - python3-flask-cors
           - python3-flaskext.wtf
@@ -389,11 +371,6 @@
         block: |
           export GOPATH=$HOME/go
           export PATH=/usr/local/go/bin:$PATH:$GOPATH/bin
-          alias custom='cd /usr/local/share/pwnagotchi/custom-plugins/'
-          alias config='sudo nano /etc/pwnagotchi/config.toml'
-          alias pwnlog='tail -f -n300 /etc/pwnagotchi/log/pwn*.log | sed --unbuffered "s/,[[:digit:]]\\{3\\}\\]//g" | cut -d " " -f 2-'
-          alias pwnver='python3 -c "import pwnagotchi as p; print(p.__version__)"'
-          alias pwnkill='sudo killall -USR1 pwnagotchi'
       when: golang.changed
 
     - name: download pwngrid
@@ -475,20 +452,6 @@
         path: /boot/ssh
         state: touch
 
-    - name: adjust /boot/config.txt
-      lineinfile:
-        dest: /boot/config.txt
-        insertafter: EOF
-        line: '{{ item }}'
-      with_items: "{{system.boot_options}}"
-
-    - name: adjust /etc/modules
-      lineinfile:
-        dest: /etc/modules
-        insertafter: EOF
-        line: '{{ item }}'
-      with_items: "{{system.modules}}"
-
     - name: change root partition
       replace:
         dest: /boot/cmdline.txt

builder/raspberrypi64.json.pkr.hcl

@@ -95,6 +95,6 @@ build {
   provisioner "ansible-local" {
     command         = "ANSIBLE_FORCE_COLOR=1 PYTHONUNBUFFERED=1 PWN_VERSION=${var.pwn_version} PWN_HOSTNAME=${var.pwn_hostname} ansible-playbook"
     extra_arguments = ["--extra-vars \"ansible_python_interpreter=/usr/bin/python3\""]
-    playbook_file   = "data/64bit/raspberrypi64.yml"
+    playbook_file   = "raspberrypi64.yml"
   }
 }

builder/raspberrypi64.yml

@@ -11,23 +11,6 @@
     pwnagotchi:
       hostname: "{{ lookup('env', 'PWN_HOSTNAME') | default('pwnagotchi', true) }}"
       version: "{{ lookup('env', 'PWN_VERSION') | default('pwnagotchi', true) }}"
-    system:
-      boot_options:
-        - "dtoverlay=dwc2"
-        - "dtparam=i2c1=on"
-        - "dtparam=i2c_arm=on"
-        - "dtparam=spi=on"
-        - "gpu_mem=16"
-        - "[pi0]"
-        - "dtoverlay=spi0-0cs"
-        - "[pi3]"
-        - "dtoverlay=spi0-0cs"
-        - "[pi4]"
-        - "dtoverlay=spi0-0cs"
-        - "[pi5]"
-        - "dtoverlay=spi0-0cs"
-      modules:
-        - "i2c-dev"
     services:
       enable:
         - bettercap.service
@@ -81,6 +64,7 @@
           - bc
           - bison
           - bluez
+          - bluez-tools
           - build-essential
           - curl
           - dkms
@@ -211,25 +195,6 @@
         path: /etc/rc.local
         state: absent
 
-    - name: adjust /boot/firmware/config.txt
-      blockinfile:
-        dest: /boot/firmware/config.txt
-        insertafter: EOF
-        block: |
-          dtoverlay=dwc2
-          dtparam=i2c1=on
-          dtparam=i2c_arm=on"
-          dtparam=spi=on
-          gpu_mem=16
-          [pi0]
-          dtoverlay=spi0-0cs
-          [pi3]
-          dtoverlay=spi0-0cs
-          [pi4]
-          dtoverlay=spi0-0cs
-          [pi5]
-          dtoverlay=spi0-0cs
-
     - name: change root partition
       replace:
         dest: /boot/firmware/cmdline.txt
@@ -517,16 +482,11 @@
 
     - name: Update .bashrc for go-1.21
       blockinfile:
-        dest: /home/pi/.bashrc
+        dest: /etc/profile
         state: present
         block: |
           export GOPATH=$HOME/go
           export PATH=/usr/local/go/bin:$PATH:$GOPATH/bin
-          alias custom='cd /usr/local/share/pwnagotchi/custom-plugins/'
-          alias config='sudo nano /etc/pwnagotchi/config.toml'
-          alias pwnlog='tail -f -n300 /etc/pwnagotchi/log/pwn*.log | sed --unbuffered "s/,[[:digit:]]\\{3\\}\\]//g" | cut -d " " -f 2-'
-          alias pwnver='python3 -c "import pwnagotchi as p; print(p.__version__)"'
-          alias pwnkill='sudo killall -USR1 pwnagotchi'
       when: golang.changed
 
     - name: download pwngrid

pwnagotchi/_version.py

@@ -1 +1 @@
-__version__ = '2.8.7.1'
+__version__ = '2.8.8'

pwnagotchi/agent.py

@@ -254,7 +254,7 @@ class Agent(Client, Automata, AsyncAdvertiser, AsyncTrainer):
         txt = '%d (%d)' % (len(self._handshakes), tot)
 
         if self._last_pwnd is not None:
-            txt += ' [%s]' % self._last_pwnd[:11]  # So it doesn't overlap with fix_brcmfmac_plugin
+            txt += ' [%s]' % self._last_pwnd
 
         self._view.set('shakes', txt)
 

pwnagotchi/bettercap.py

@@ -100,7 +100,6 @@ class Client(object):
                 await asyncio.sleep(sleep_time)
                 continue
             except OSError:
-                sleep_time = min_sleep + max_sleep * random.random()
                 logging.warning('connection to the bettercap endpoint failed...')
                 pwnagotchi.restart("AUTO")
 

pwnagotchi/defaults.toml

@@ -112,8 +112,6 @@ main.mon_stop_cmd = "/usr/bin/monstop"
 main.mon_max_blind_epochs = 50
 main.no_restart = false
 
-main.filter = ""
-
 main.log.path = "/etc/pwnagotchi/log/pwnagotchi.log"
 main.log.rotation.enabled = true
 main.log.rotation.size = "10M"

pwnagotchi/locale/fy/LC_MESSAGES/voice.po

@@ -248,7 +248,7 @@ msgid "minutes"
 msgstr "minuten"
 
 msgid "seconds"
-msgstr "seconds"
+msgstr "sekondes"
 
 msgid "hour"
 msgstr "oere"

pwnagotchi/plugins/default/fix_services.py

@@ -4,6 +4,8 @@ import subprocess
 import time
 import random
 from io import TextIOWrapper
+import os
+import platform
 
 import pwnagotchi
 from pwnagotchi import plugins
@@ -32,6 +34,8 @@ class FixServices(plugins.Plugin):
         self.pattern2 = re.compile(r'wifi error while hopping to channel')
         self.pattern3 = re.compile(r'Firmware has halted or crashed')
         self.pattern4 = re.compile(r'error 400: could not find interface wlan0mon')
+        self.pattern5 = re.compile(r'fatal error: concurrent map iteration and map write')
+        self.pattern6 = re.compile(r'panic: runtime error')
         self.isReloadingMon = False
         self.connection = None
         self.LASTTRY = 0
@@ -113,41 +117,43 @@ class FixServices(plugins.Plugin):
             logging.debug("[Fix_Services]**** checking")
 
             # Look for pattern 1
-            if len(self.pattern.findall(last_lines)) >= 3:
+            if platform.machine().startswith('arm'):
-                logging.debug("[Fix_Services]**** Should trigger a reload of the wlan0mon device:\n%s" % last_lines)
+                if len(self.pattern.findall(last_lines)) >= 3:
-                if hasattr(agent, 'view'):
+                    logging.debug("[Fix_Services]**** Should trigger a reload of the wlan0mon device:\n%s" % last_lines)
-                    display = agent.view()
+                    if hasattr(agent, 'view'):
-                    display.set('status', 'Blind-Bug detected. Restarting.')
+                        display = agent.view()
-                    display.update(force=True)
+                        display.set('status', 'Blind-Bug detected. Restarting.')
-                logging.debug('[Fix_Services] Blind-Bug detected. Restarting.')
+                        display.update(force=True)
-                try:
+                    logging.debug('[Fix_Services] Blind-Bug detected. Restarting.')
-                    self._tryTurningItOffAndOnAgain(agent)
+                    try:
-                except Exception as err:
+                        self._tryTurningItOffAndOnAgain(agent)
-                    logging.warning("[Fix_Services] TTOAOA: %s" % repr(err))
+                    except Exception as err:
+                        logging.warning("[Fix_Services] TTOAOA: %s" % repr(err))
 
             # Look for pattern 2
             elif len(self.pattern2.findall(other_last_lines)) >= 5:
-                logging.debug("[Fix_Services]**** Should trigger a reload of the wlan0mon device:\n%s" % last_lines)
+                if platform.machine().startswith('arm'):
-                if hasattr(agent, 'view'):
+                    logging.debug("[Fix_Services]**** Should trigger a reload of the wlan0mon device:\n%s" % last_lines)
-                    display = agent.view()
+                    if hasattr(agent, 'view'):
-                    display.set('status', 'Wifi channel stuck. Restarting recon.')
+                        display = agent.view()
-                    display.update(force=True)
+                        display.set('status', 'Wifi channel stuck. Restarting recon.')
-                logging.debug('[Fix_Services] Wifi channel stuck. Restarting recon.')
+                        display.update(force=True)
+                    logging.debug('[Fix_Services] Wifi channel stuck. Restarting recon.')
 
-                try:
+                    try:
-                    result = agent.run("wifi.recon off; wifi.recon on")
+                        result = agent.run("wifi.recon off; wifi.recon on")
-                    if result["success"]:
+                        if result["success"]:
-                        logging.debug("[Fix_Services] wifi.recon flip: success!")
+                            logging.debug("[Fix_Services] wifi.recon flip: success!")
-                        if display:
+                            if display:
-                            display.update(force=True, new_data={"status": "Wifi recon flipped!",
+                                display.update(force=True, new_data={"status": "Wifi recon flipped!",
-                                                                 "face": faces.COOL})
+                                                                     "face": faces.COOL})
+                            else:
+                                print("Wifi recon flipped\nthat was easy!")
                         else:
-                            print("Wifi recon flipped\nthat was easy!")
+                            logging.warning("[Fix_Services] wifi.recon flip: FAILED: %s" % repr(result))
-                    else:
-                        logging.warning("[Fix_Services] wifi.recon flip: FAILED: %s" % repr(result))
 
-                except Exception as err:
+                    except Exception as err:
-                    logging.error("[Fix_Services wifi.recon flip] %s" % repr(err))
+                        logging.error("[Fix_Services wifi.recon flip] %s" % repr(err))
 
             # Look for pattern 3
             elif len(self.pattern3.findall(other_last_lines)) >= 1:
@@ -177,6 +183,25 @@ class FixServices(plugins.Plugin):
                 except Exception as err:
                     logging.error("[Fix_Services monstart]: %s" % repr(err))
 
+            # Look for pattern 5
+            elif len(self.pattern5.findall(other_other_last_lines)) >= 1:
+                logging.debug("[Fix_Services] Bettercap has crashed!")
+                if hasattr(agent, 'view'):
+                    display = agent.view()
+                    display.set('status', 'Restarting pwnagotchi!')
+                    display.update(force=True)
+                os.system("systemctl restart bettercap")
+                pwnagotchi.restart("AUTO")
+
+            # Look for pattern 6
+            elif len(self.pattern6.findall(other_other_last_lines)) >= 1:
+                logging.debug("[Fix_Services] Bettercap has crashed!")
+                if hasattr(agent, 'view'):
+                    display = agent.view()
+                    display.set('status', 'Restarting pwnagotchi!')
+                    display.update(force=True)
+                os.system("systemctl restart bettercap")
+                pwnagotchi.restart("AUTO")
             else:
                 print("logs look good")
 

pwnagotchi/ui/display.py

@@ -202,6 +202,9 @@ class Display(View):
     def is_inky(self):
         return self._implementation.name == 'inky'
 
+    def is_dummy_display(self):
+        return self._implementation.name == 'dummydisplay'
+
     def is_papirus(self):
         return self._implementation.name == 'papirus'
 
@@ -232,6 +235,9 @@ class Display(View):
     def is_waveshare35lcd(self):
         return self._implementation.name == 'waveshare35lcd'
 
+    def is_adfruit213v3(self):
+        return self._implementation.name == 'adafruit2in13_v3'
+
     def is_waveshare_any(self):
         return self.is_waveshare_v1() or self.is_waveshare_v2()
 

pwnagotchi/ui/faces.py

@@ -27,6 +27,7 @@ PNG = False
 POSITION_X = 0
 POSITION_Y = 40
 
+
 def load_from_config(config):
     for face_name, face_value in config.items():
         globals()[face_name.upper()] = face_value

pwnagotchi/ui/hw/__init__.py

@@ -1,4 +1,5 @@
 from pwnagotchi.ui.hw.inky import Inky
+from pwnagotchi.ui.hw.dummydisplay import DummyDisplay
 from pwnagotchi.ui.hw.papirus import Papirus
 from pwnagotchi.ui.hw.oledhat import OledHat
 from pwnagotchi.ui.hw.lcdhat import LcdHat
@@ -24,6 +25,7 @@ from pwnagotchi.ui.hw.displayhatmini import DisplayHatMini
 from pwnagotchi.ui.hw.pirateaudio import PirateAudio
 from pwnagotchi.ui.hw.pitft import Pitft
 from pwnagotchi.ui.hw.tftbonnet import TftBonnet
+from pwnagotchi.ui.hw.adafruit2in13 import Adafruit2in13V3
 from pwnagotchi.ui.hw.waveshareoledlcd import Waveshareoledlcd
 from pwnagotchi.ui.hw.waveshare1in02 import Waveshare1in02
 from pwnagotchi.ui.hw.waveshare1in54 import Waveshare154
@@ -75,6 +77,9 @@ def display_for(config):
     if config['ui']['display']['type'] == 'inky':
         return Inky(config)
 
+    elif config['ui']['display']['type'] == 'dummydisplay':
+        return DummyDisplay(config)
+
     elif config['ui']['display']['type'] == 'papirus':
         return Papirus(config)
 
@@ -177,6 +182,9 @@ def display_for(config):
     elif config['ui']['display']['type'] == 'waveshare_4':
         return WaveshareV4(config)
 
+    elif config['ui']['display']['type'] == 'adafruit2in13':
+        return Adafruit2in13(config)
+
     elif config['ui']['display']['type'] == 'waveshare2in13bc':
         return Waveshare213bc(config)
 

pwnagotchi/ui/hw/adafruit2in13.py

@@ -0,0 +1,45 @@
+import logging
+
+import pwnagotchi.ui.fonts as fonts
+from pwnagotchi.ui.hw.base import DisplayImpl
+
+
+class Adafruit2in13V3(DisplayImpl):
+    def __init__(self, config):
+        super(Adafruit2in13V3, self).__init__(config, 'adafruit2in13_v3')
+
+    def layout(self):
+        fonts.setup(10, 9, 10, 35, 25, 9)
+        self._layout['width'] = 250
+        self._layout['height'] = 122
+        self._layout['face'] = (0, 40)
+        self._layout['name'] = (5, 20)
+        self._layout['channel'] = (0, 0)
+        self._layout['aps'] = (28, 0)
+        self._layout['uptime'] = (185, 0)
+        self._layout['line1'] = [0, 14, 250, 14]
+        self._layout['line2'] = [0, 108, 250, 108]
+        self._layout['friend_face'] = (0, 92)
+        self._layout['friend_name'] = (40, 94)
+        self._layout['shakes'] = (0, 109)
+        self._layout['mode'] = (225, 109)
+        self._layout['status'] = {
+            'pos': (125, 20),
+            'font': fonts.status_font(fonts.Medium),
+            'max': 20
+        }
+        return self._layout
+
+    def initialize(self):
+        logging.info("initializing adafruit 2in13 V3 display")
+        from pwnagotchi.ui.hw.libs.adafruit.v2in13_v3.epd2in13_v3 import EPD
+        self._display = EPD()
+        self._display.init()
+        self._display.Clear(0xFF)
+
+    def render(self, canvas):
+        buf = self._display.getbuffer(canvas)
+        self._display.displayPartial(buf)
+
+    def clear(self):
+        self._display.Clear(0xFF)

pwnagotchi/ui/hw/displayhatmini.py

@@ -34,10 +34,10 @@ class DisplayHatMini(DisplayImpl):
     def initialize(self):
         logging.info("initializing Display Hat Mini")
         from pwnagotchi.ui.hw.libs.pimoroni.displayhatmini.ST7789 import ST7789
-        self._display = ST7789(0,1,9,13)
+        self._display = ST7789(0, 1, 9, 13)
 
     def render(self, canvas):
         self._display.display(canvas)
 
     def clear(self):
-        self._display.clear()
+        self._display.clear()

pwnagotchi/ui/hw/dummydisplay.py

@@ -0,0 +1,43 @@
+import logging
+
+import pwnagotchi.ui.fonts as fonts
+from pwnagotchi.ui.hw.base import DisplayImpl
+
+
+class DummyDisplay(DisplayImpl):
+    def __init__(self, config):
+        super(DummyDisplay, self).__init__(config, 'DummyDisplay')
+
+    def layout(self):
+        width = 480 if 'width' not in self.config else self.config['width']
+        height = 720 if 'height' not in self.config else self.config['height']
+        fonts.setup(int(height/30), int(height/40), int(height/30), int(height/6), int(height/30), int(height/35))
+        self._layout['width'] = width
+        self._layout['height'] = height
+        self._layout['face'] = (0, int(width/12))
+        self._layout['name'] = (5, int(width/25))
+        self._layout['channel'] = (0, 0)
+        self._layout['aps'] = (int(width/8), 0)
+        self._layout['uptime'] = (width-int(width/12), 0)
+        self._layout['line1'] = [0, int(height/32), width, int(height/32)]
+        self._layout['line2'] = [0, height-int(height/25)-1, width, height-int(height/25)-1]
+        self._layout['friend_face'] = (0, int(height/10))
+        self._layout['friend_name'] = (int(width/12), int(height/10))
+        self._layout['shakes'] = (0, height-int(height/25))
+        self._layout['mode'] = (width-int(width/8), height - int (height/25))
+        lw, lh = fonts.Small.getsize("W")
+        self._layout['status'] = {
+            'pos': (int(width/48), int(height/3)),
+            'font': fonts.status_font(fonts.Small),
+            'max': int(width / lw)
+        }
+        return self._layout
+
+    def initialize(self):
+        return
+
+    def render(self, canvas):
+        return
+
+    def clear(self):
+        return

pwnagotchi/ui/hw/libs/adafruit/epdconfig.py

@@ -0,0 +1,132 @@
+# /*****************************************************************************
+# * | File        :	  epdconfig.py
+# * | Author      :   Waveshare team
+# * | Function    :   Hardware underlying interface
+# * | Info        :
+# *----------------
+# * | This version:   V1.2
+# * | Date        :   2022-10-29
+# * | Info        :
+# ******************************************************************************
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+
+import os
+import logging
+import sys
+import time
+import subprocess
+
+logger = logging.getLogger(__name__)
+
+
+class RaspberryPi:
+    # Pin definition
+    RST_PIN = 27
+    DC_PIN = 22
+    CS_PIN = 8
+    BUSY_PIN = 17
+    PWR_PIN = 18
+
+    def __init__(self):
+        import spidev
+        import gpiozero
+
+        self.SPI = spidev.SpiDev()
+        self.GPIO_RST_PIN = gpiozero.LED(self.RST_PIN)
+        self.GPIO_DC_PIN = gpiozero.LED(self.DC_PIN)
+        self.GPIO_CS_PIN = gpiozero.LED(self.CS_PIN)
+        self.GPIO_PWR_PIN = gpiozero.LED(self.PWR_PIN)
+        self.GPIO_BUSY_PIN = gpiozero.Button(self.BUSY_PIN, pull_up=False)
+
+    def digital_write(self, pin, value):
+        if pin == self.RST_PIN:
+            if value:
+                self.GPIO_RST_PIN.on()
+            else:
+                self.GPIO_RST_PIN.off()
+        elif pin == self.DC_PIN:
+            if value:
+                self.GPIO_DC_PIN.on()
+            else:
+                self.GPIO_DC_PIN.off()
+        elif pin == self.CS_PIN:
+            if value:
+                self.GPIO_CS_PIN.on()
+            else:
+                self.GPIO_CS_PIN.off()
+        elif pin == self.PWR_PIN:
+            if value:
+                self.GPIO_PWR_PIN.on()
+            else:
+                self.GPIO_PWR_PIN.off()
+
+    def digital_read(self, pin):
+        if pin == self.BUSY_PIN:
+            return self.GPIO_BUSY_PIN.value
+        elif pin == self.RST_PIN:
+            return self.RST_PIN.value
+        elif pin == self.DC_PIN:
+            return self.DC_PIN.value
+        elif pin == self.CS_PIN:
+            return self.CS_PIN.value
+        elif pin == self.PWR_PIN:
+            return self.PWR_PIN.value
+
+    def delay_ms(self, delaytime):
+        time.sleep(delaytime / 1000.0)
+
+    def spi_writebyte(self, data):
+        self.SPI.writebytes(data)
+
+    def spi_writebyte2(self, data):
+        self.SPI.writebytes2(data)
+
+    def module_init(self):
+        self.GPIO_PWR_PIN.on()
+
+        # SPI device, bus = 0, device = 0
+        self.SPI.open(0, 0)
+        self.SPI.max_speed_hz = 4000000
+        self.SPI.mode = 0b00
+        return 0
+
+    def module_exit(self, cleanup=False):
+        logger.debug("spi end")
+        self.SPI.close()
+
+        self.GPIO_RST_PIN.off()
+        self.GPIO_DC_PIN.off()
+        self.GPIO_PWR_PIN.off()
+        logger.debug("close 5V, Module enters 0 power consumption ...")
+
+        if cleanup:
+            self.GPIO_RST_PIN.close()
+            self.GPIO_DC_PIN.close()
+            self.GPIO_CS_PIN.close()
+            self.GPIO_PWR_PIN.close()
+            self.GPIO_BUSY_PIN.close()
+
+
+implementation = RaspberryPi()
+
+for func in [x for x in dir(implementation) if not x.startswith('_')]:
+    setattr(sys.modules[__name__], func, getattr(implementation, func))
+
+### END OF FILE ###

pwnagotchi/ui/hw/libs/adafruit/v2in13_v3/epd2in13_v3.py

@@ -4,8 +4,8 @@
 # * | Function    :   Electronic paper driver
 # * | Info        :
 # *----------------
-# * | This version:   V1.1
+# * | This version:   V1.2
-# * | Date        :   2021-10-30
+# * | Date        :   2022-08-9
 # # | Info        :   python demo
 # -----------------------------------------------------------------------------
 # Permission is hereby granted, free of charge, to any person obtaining a copy
@@ -29,15 +29,15 @@
 
 
 import logging
-from . import epdconfig
+from .. import epdconfig
-import numpy as np
 
 # Display resolution
-EPD_WIDTH       = 122
+EPD_WIDTH = 122
-EPD_HEIGHT      = 250
+EPD_HEIGHT = 250
 
 logger = logging.getLogger(__name__)
 
+
 class EPD:
     def __init__(self):
         self.reset_pin = epdconfig.RST_PIN
@@ -46,68 +46,70 @@ class EPD:
         self.cs_pin = epdconfig.CS_PIN
         self.width = EPD_WIDTH
         self.height = EPD_HEIGHT
-        
+
-    lut_partial_update= [
+    lut_partial_update = [
-        0x0,0x40,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x40, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x80,0x80,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x80, 0x80, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x40,0x40,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x40, 0x40, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x80,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x80, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x14,0x0,0x0,0x0,0x0,0x0,0x0,  
+        0x14, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x1,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x1, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x1,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x1, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x22,0x22,0x22,0x22,0x22,0x22,0x0,0x0,0x0,
+        0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x0, 0x0, 0x0,
-        0x22,0x17,0x41,0x00,0x32,0x36,
+        0x22, 0x17, 0x41, 0x00, 0x32, 0x36,
     ]
 
-    lut_full_update = [ 
+    lut_full_update = [
-        0x80,0x4A,0x40,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x80, 0x4A, 0x40, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x40,0x4A,0x80,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x40, 0x4A, 0x80, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x80,0x4A,0x40,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x80, 0x4A, 0x40, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x40,0x4A,0x80,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x40, 0x4A, 0x80, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0xF,0x0,0x0,0x0,0x0,0x0,0x0,
+        0xF, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0xF,0x0,0x0,0xF,0x0,0x0,0x2,
+        0xF, 0x0, 0x0, 0xF, 0x0, 0x0, 0x2,
-        0xF,0x0,0x0,0x0,0x0,0x0,0x0,
+        0xF, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x1,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x1, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x0,0x0,0x0,0x0,0x0,0x0,0x0,
+        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-        0x22,0x22,0x22,0x22,0x22,0x22,0x0,0x0,0x0,
+        0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x0, 0x0, 0x0,
-        0x22,0x17,0x41,0x0,0x32,0x36,
+        0x22, 0x17, 0x41, 0x0, 0x32, 0x36,
     ]
-        
+
     '''
     function :Hardware reset
     parameter:
     '''
+
     def reset(self):
         epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(20) 
+        epdconfig.delay_ms(20)
         epdconfig.digital_write(self.reset_pin, 0)
         epdconfig.delay_ms(2)
         epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(20)   
+        epdconfig.delay_ms(20)
 
     '''
     function :send command
     parameter:
      command : Command register
     '''
+
     def send_command(self, command):
         epdconfig.digital_write(self.dc_pin, 0)
         epdconfig.digital_write(self.cs_pin, 0)
@@ -119,71 +121,84 @@ class EPD:
     parameter:
      data : Write data
     '''
+
     def send_data(self, data):
         epdconfig.digital_write(self.dc_pin, 1)
         epdconfig.digital_write(self.cs_pin, 0)
         epdconfig.spi_writebyte([data])
         epdconfig.digital_write(self.cs_pin, 1)
-    
+
+    # send a lot of data
+    def send_data2(self, data):
+        epdconfig.digital_write(self.dc_pin, 1)
+        epdconfig.digital_write(self.cs_pin, 0)
+        epdconfig.spi_writebyte2(data)
+        epdconfig.digital_write(self.cs_pin, 1)
+
     '''
     function :Wait until the busy_pin goes LOW
     parameter:
     '''
+
     def ReadBusy(self):
         logger.debug("e-Paper busy")
-        while(epdconfig.digital_read(self.busy_pin) == 1):      # 0: idle, 1: busy
+        while (epdconfig.digital_read(self.busy_pin) == 1):  # 0: idle, 1: busy
-            epdconfig.delay_ms(10)  
+            epdconfig.delay_ms(10)
         logger.debug("e-Paper busy release")
 
     '''
     function : Turn On Display
     parameter:
     '''
+
     def TurnOnDisplay(self):
-        self.send_command(0x22) # Display Update Control
+        self.send_command(0x22)  # Display Update Control
         self.send_data(0xC7)
-        self.send_command(0x20) # Activate Display Update Sequence
+        self.send_command(0x20)  # Activate Display Update Sequence
         self.ReadBusy()
-    
+
     '''
     function : Turn On Display Part
     parameter:
     '''
+
     def TurnOnDisplayPart(self):
-        self.send_command(0x22) # Display Update Control
+        self.send_command(0x22)  # Display Update Control
-        self.send_data(0x0f)    # fast:0x0c, quality:0x0f, 0xcf
+        self.send_data(0x0f)  # fast:0x0c, quality:0x0f, 0xcf
-        self.send_command(0x20) # Activate Display Update Sequence
+        self.send_command(0x20)  # Activate Display Update Sequence
         self.ReadBusy()
-    
+
     '''
     function : Set lut
     parameter:
         lut : lut data
-    '''    
+    '''
+
     def Lut(self, lut):
         self.send_command(0x32)
         for i in range(0, 153):
             self.send_data(lut[i])
         self.ReadBusy()
-    
+
     '''
     function : Send lut data and configuration
     parameter:
         lut : lut data 
     '''
+
     def SetLut(self, lut):
         self.Lut(lut)
         self.send_command(0x3f)
         self.send_data(lut[153])
-        self.send_command(0x03)     # gate voltage
+        self.send_command(0x03)  # gate voltage
         self.send_data(lut[154])
-        self.send_command(0x04)     # source voltage
+        self.send_command(0x04)  # source voltage
-        self.send_data(lut[155])    # VSH
+        self.send_data(lut[155])  # VSH
-        self.send_data(lut[156])    # VSH2
+        self.send_data(lut[156])  # VSH2
-        self.send_data(lut[157])    # VSL
+        self.send_data(lut[157])  # VSL
-        self.send_command(0x2c)     # VCOM
+        self.send_command(0x2c)  # VCOM
         self.send_data(lut[158])
-    
+
     '''
     function : Setting the display window
     parameter:
@@ -192,13 +207,14 @@ class EPD:
         xend : End position of X-axis
         yend : End position of Y-axis
     '''
+
     def SetWindow(self, x_start, y_start, x_end, y_end):
-        self.send_command(0x44) # SET_RAM_X_ADDRESS_START_END_POSITION
+        self.send_command(0x44)  # SET_RAM_X_ADDRESS_START_END_POSITION
         # x point must be the multiple of 8 or the last 3 bits will be ignored
-        self.send_data((x_start>>3) & 0xFF)
+        self.send_data((x_start >> 3) & 0xFF)
-        self.send_data((x_end>>3) & 0xFF)
+        self.send_data((x_end >> 3) & 0xFF)
-        
+
-        self.send_command(0x45) # SET_RAM_Y_ADDRESS_START_END_POSITION
+        self.send_command(0x45)  # SET_RAM_Y_ADDRESS_START_END_POSITION
         self.send_data(y_start & 0xFF)
         self.send_data((y_start >> 8) & 0xFF)
         self.send_data(y_end & 0xFF)
@@ -210,52 +226,54 @@ class EPD:
         x : X-axis starting position
         y : Y-axis starting position
     '''
+
     def SetCursor(self, x, y):
-        self.send_command(0x4E) # SET_RAM_X_ADDRESS_COUNTER
+        self.send_command(0x4E)  # SET_RAM_X_ADDRESS_COUNTER
         # x point must be the multiple of 8 or the last 3 bits will be ignored
         self.send_data(x & 0xFF)
-        
+
-        self.send_command(0x4F) # SET_RAM_Y_ADDRESS_COUNTER
+        self.send_command(0x4F)  # SET_RAM_Y_ADDRESS_COUNTER
         self.send_data(y & 0xFF)
         self.send_data((y >> 8) & 0xFF)
-    
+
     '''
     function : Initialize the e-Paper register
     parameter:
     '''
+
     def init(self):
         if (epdconfig.module_init() != 0):
             return -1
         # EPD hardware init start
         self.reset()
-        
-        self.ReadBusy()
-        self.send_command(0x12)  #SWRESET
-        self.ReadBusy() 
 
-        self.send_command(0x01) #Driver output control      
+        self.ReadBusy()
+        self.send_command(0x12)  # SWRESET
+        self.ReadBusy()
+
+        self.send_command(0x01)  # Driver output control
         self.send_data(0xf9)
         self.send_data(0x00)
         self.send_data(0x00)
-    
+
-        self.send_command(0x11) #data entry mode       
+        self.send_command(0x11)  # data entry mode
         self.send_data(0x03)
 
-        self.SetWindow(0, 0, self.width-1, self.height-1)
+        self.SetWindow(0, 0, self.width - 1, self.height - 1)
         self.SetCursor(0, 0)
-        
+
         self.send_command(0x3c)
         self.send_data(0x05)
 
-        self.send_command(0x21) #  Display update control
+        self.send_command(0x21)  # Display update control
         self.send_data(0x00)
         self.send_data(0x80)
-    
+
         self.send_command(0x18)
         self.send_data(0x80)
-        
+
         self.ReadBusy()
-        
+
         self.SetLut(self.lut_full_update)
         return 0
 
@@ -264,54 +282,52 @@ class EPD:
     parameter:
         image : Image data
     '''
+
     def getbuffer(self, image):
         img = image
         imwidth, imheight = img.size
-        if(imwidth == self.width and imheight == self.height):
+        if (imwidth == self.width and imheight == self.height):
             img = img.convert('1')
-        elif(imwidth == self.height and imheight == self.width):
+        elif (imwidth == self.height and imheight == self.width):
             # image has correct dimensions, but needs to be rotated
             img = img.rotate(90, expand=True).convert('1')
         else:
             logger.warning("Wrong image dimensions: must be " + str(self.width) + "x" + str(self.height))
             # return a blank buffer
-            return [0x00] * (int(self.width/8) * self.height)
+            return [0x00] * (int(self.width / 8) * self.height)
 
         buf = bytearray(img.tobytes('raw'))
         return buf
-        
+
     '''
     function : Sends the image buffer in RAM to e-Paper and displays
     parameter:
         image : Image data
     '''
+
     def display(self, image):
-        if self.width%8 == 0:
+        if self.width % 8 == 0:
-            linewidth = int(self.width/8)
+            linewidth = int(self.width / 8)
         else:
-            linewidth = int(self.width/8) + 1
+            linewidth = int(self.width / 8) + 1
 
         self.send_command(0x24)
         for j in range(0, self.height):
             for i in range(0, linewidth):
-                self.send_data(image[i + j * linewidth])   
+                self.send_data(image[i + j * linewidth])
         self.TurnOnDisplay()
-    
+
     '''
     function : Sends the image buffer in RAM to e-Paper and partial refresh
     parameter:
         image : Image data
     '''
-    def displayPartial(self, image):
-        if self.width%8 == 0:
-            linewidth = int(self.width/8)
-        else:
-            linewidth = int(self.width/8) + 1
 
+    def displayPartial(self, image):
         epdconfig.digital_write(self.reset_pin, 0)
         epdconfig.delay_ms(1)
-        epdconfig.digital_write(self.reset_pin, 1)  
+        epdconfig.digital_write(self.reset_pin, 1)
-        
+
         self.SetLut(self.lut_partial_update)
         self.send_command(0x37)
         self.send_data(0x00)
@@ -322,24 +338,25 @@ class EPD:
         self.send_data(0x40)
         self.send_data(0x00)
         self.send_data(0x00)
-        self.send_data(0x00)  
+        self.send_data(0x00)
         self.send_data(0x00)
 
-        self.send_command(0x3C) #BorderWavefrom
+        self.send_command(0x3C)  # BorderWavefrom
         self.send_data(0x80)
 
-        self.send_command(0x22) 
+        self.send_command(0x22)
         self.send_data(0xC0)
         self.send_command(0x20)
         self.ReadBusy()
 
         self.SetWindow(0, 0, self.width - 1, self.height - 1)
         self.SetCursor(0, 0)
-        
+
-        self.send_command(0x24) # WRITE_RAM
+        self.send_command(0x24)  # WRITE_RAM
-        for j in range(0, self.height):
+        # for j in range(0, self.height):
-            for i in range(0, linewidth):
+        #     for i in range(0, linewidth):
-                self.send_data(image[i + j * linewidth])   
+        #         self.send_data(image[i + j * linewidth])
+        self.send_data2(image)
         self.TurnOnDisplayPart()
 
     '''
@@ -347,51 +364,41 @@ class EPD:
     parameter:
         image : Image data
     '''
-    def displayPartBaseImage(self, image):
-        if self.width%8 == 0:
-            linewidth = int(self.width/8)
-        else:
-            linewidth = int(self.width/8) + 1
 
+    def displayPartBaseImage(self, image):
         self.send_command(0x24)
-        for j in range(0, self.height):
+        self.send_data2(image)
-            for i in range(0, linewidth):
+
-                self.send_data(image[i + j * linewidth])   
-                
         self.send_command(0x26)
-        for j in range(0, self.height):
+        self.send_data2(image)
-            for i in range(0, linewidth):
-                self.send_data(image[i + j * linewidth])  
         self.TurnOnDisplay()
-    
+
     '''
     function : Clear screen
     parameter:
     '''
-    def Clear(self, color):
+
-        if self.width%8 == 0:
+    def Clear(self, color=0xFF):
-            linewidth = int(self.width/8)
+        if self.width % 8 == 0:
+            linewidth = int(self.width / 8)
         else:
-            linewidth = int(self.width/8) + 1
+            linewidth = int(self.width / 8) + 1
         # logger.debug(linewidth)
-        
+
         self.send_command(0x24)
-        for j in range(0, self.height):
+        self.send_data2([color] * int(self.height * linewidth))
-            for i in range(0, linewidth):
-                self.send_data(color)
-                
         self.TurnOnDisplay()
 
     '''
     function : Enter sleep mode
     parameter:
     '''
+
     def sleep(self):
-        self.send_command(0x10) #enter deep sleep
+        self.send_command(0x10)  # enter deep sleep
         self.send_data(0x01)
-        
+
         epdconfig.delay_ms(2000)
         epdconfig.module_exit()
 
 ### END OF FILE ###
-

pwnagotchi/ui/hw/libs/pimoroni/displayhatmini/ST7789.py

@@ -90,8 +90,8 @@ ST7789_PWCTR6 = 0xFC
 class ST7789(object):
     """Representation of an ST7789 TFT LCD."""
 
-    def __init__(self, port, cs, dc, backlight, rst=None, width=320,
+    def __init__(self, port, cs, dc, backlight=None, rst=None, width=240,
-                 height=240, rotation=0, invert=True, spi_speed_hz=60 * 1000 * 1000,
+                 height=240, rotation=90, invert=True, spi_speed_hz=4000000,
                  offset_left=0,
                  offset_top=0):
         """Create an instance of the display using SPI communication.

pwnagotchi/ui/hw/libs/waveshare/v1/epd2in13.py

@@ -1,224 +0,0 @@
-# *****************************************************************************
-# * | File        :	  epd2in13.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * | This version:   V4.0
-# * | Date        :   2019-06-20
-# # | Info        :   python demo
-# -----------------------------------------------------------------------------
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-
-import logging
-from . import epdconfig
-
-# Display resolution
-EPD_WIDTH       = 122
-EPD_HEIGHT      = 250
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = epdconfig.RST_PIN
-        self.dc_pin = epdconfig.DC_PIN
-        self.busy_pin = epdconfig.BUSY_PIN
-        self.cs_pin = epdconfig.CS_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-
-    lut_full_update = [
-        0x22, 0x55, 0xAA, 0x55, 0xAA, 0x55, 0xAA, 0x11,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E, 0x1E,
-        0x01, 0x00, 0x00, 0x00, 0x00, 0x00
-    ]
-
-    lut_partial_update  = [
-        0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x0F, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-    ]
-        
-    # Hardware reset
-    def reset(self):
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200) 
-        epdconfig.digital_write(self.reset_pin, 0)
-        epdconfig.delay_ms(10)
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200)   
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    def send_command(self, command):
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.digital_write(self.dc_pin, 0)
-        epdconfig.spi_writebyte([command])
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    def send_data(self, data):
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.digital_write(self.dc_pin, 1)
-        epdconfig.spi_writebyte([data])
-        epdconfig.digital_write(self.cs_pin, 1)
-        
-    def ReadBusy(self):
-        while(epdconfig.digital_read(self.busy_pin) == 1):      # 0: idle, 1: busy
-            epdconfig.delay_ms(100)            
-
-    def TurnOnDisplay(self):
-        self.send_command(0x22) # DISPLAY_UPDATE_CONTROL_2
-        self.send_data(0xC4)
-        self.send_command(0x20) # MASTER_ACTIVATION
-        self.send_command(0xFF) # TERMINATE_FRAME_READ_WRITE
-
-        logging.debug("e-Paper busy")
-        self.ReadBusy()
-        logging.debug("e-Paper busy release")
-
-    def init(self, lut):
-        if (epdconfig.module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-        self.send_command(0x01) # DRIVER_OUTPUT_CONTROL
-        self.send_data((EPD_HEIGHT - 1) & 0xFF)
-        self.send_data(((EPD_HEIGHT - 1) >> 8) & 0xFF)
-        self.send_data(0x00) # GD = 0 SM = 0 TB = 0
-        
-        self.send_command(0x0C) # BOOSTER_SOFT_START_CONTROL
-        self.send_data(0xD7)
-        self.send_data(0xD6)
-        self.send_data(0x9D)
-        
-        self.send_command(0x2C) # WRITE_VCOM_REGISTER
-        self.send_data(0xA8) # VCOM 7C
-        
-        self.send_command(0x3A) # SET_DUMMY_LINE_PERIOD
-        self.send_data(0x1A) # 4 dummy lines per gate
-        
-        self.send_command(0x3B) # SET_GATE_TIME
-        self.send_data(0x08) # 2us per line
-        
-        self.send_command(0X3C) # BORDER_WAVEFORM_CONTROL
-        self.send_data(0x03)      
-        
-        self.send_command(0X11) # DATA_ENTRY_MODE_SETTING
-        self.send_data(0x03) # X increment; Y increment
-        
-        # WRITE_LUT_REGISTER
-        self.send_command(0x32)
-        for count in range(30):
-            self.send_data(lut[count])
-
-        return 0
-        
-##
- #  @brief: specify the memory area for data R/W
- ##
-    def SetWindows(self, x_start, y_start, x_end, y_end):
-        self.send_command(0x44) # SET_RAM_X_ADDRESS_START_END_POSITION
-        self.send_data((x_start >> 3) & 0xFF)
-        self.send_data((x_end >> 3) & 0xFF)
-        self.send_command(0x45) # SET_RAM_Y_ADDRESS_START_END_POSITION
-        self.send_data(y_start & 0xFF)
-        self.send_data((y_start >> 8) & 0xFF)
-        self.send_data(y_end & 0xFF)
-        self.send_data((y_end >> 8) & 0xFF)
-
-##
- #  @brief: specify the start point for data R/W
- ##
-    def SetCursor(self, x, y):
-        self.send_command(0x4E) # SET_RAM_X_ADDRESS_COUNTER
-        # x point must be the multiple of 8 or the last 3 bits will be ignored
-        self.send_data((x >> 3) & 0xFF)
-        self.send_command(0x4F) # SET_RAM_Y_ADDRESS_COUNTER
-        self.send_data(y & 0xFF)
-        self.send_data((y >> 8) & 0xFF)
-        self.ReadBusy()
-        
-    def getbuffer(self, image):
-        if self.width%8 == 0:
-            linewidth = int(self.width/8)
-        else:
-            linewidth = int(self.width/8) + 1
-         
-        buf = [0xFF] * (linewidth * self.height)
-        image_monocolor = image.convert('1')
-        imwidth, imheight = image_monocolor.size
-        pixels = image_monocolor.load()
-        
-        if(imwidth == self.width and imheight == self.height):
-            for y in range(imheight):
-                for x in range(imwidth):                    
-                    if pixels[x, y] == 0:
-                        # x = imwidth - x
-                        buf[int(x / 8) + y * linewidth] &= ~(0x80 >> (x % 8))
-        elif(imwidth == self.height and imheight == self.width):
-            for y in range(imheight):
-                for x in range(imwidth):
-                    newx = y
-                    newy = self.height - x - 1
-                    if pixels[x, y] == 0:
-                        # newy = imwidth - newy - 1
-                        buf[int(newx / 8) + newy*linewidth] &= ~(0x80 >> (y % 8))
-        return buf   
-
-        
-    def display(self, image):
-        if self.width%8 == 0:
-            linewidth = int(self.width/8)
-        else:
-            linewidth = int(self.width/8) + 1
-
-        self.SetWindows(0, 0, self.width, self.height);
-        for j in range(0, self.height):
-            self.SetCursor(0, j);
-            self.send_command(0x24);
-            for i in range(0, linewidth):
-                self.send_data(image[i + j * linewidth])   
-        self.TurnOnDisplay()
-    
-    def Clear(self, color):
-        if self.width%8 == 0:
-            linewidth = int(self.width/8)
-        else:
-            linewidth = int(self.width/8) + 1
-
-        self.SetWindows(0, 0, self.width, self.height);
-        for j in range(0, self.height):
-            self.SetCursor(0, j);
-            self.send_command(0x24);
-            for i in range(0, linewidth):
-                self.send_data(color)   
-        self.TurnOnDisplay()
-
-    def sleep(self):
-        self.send_command(0x10) #enter deep sleep
-        self.send_data(0x01)
-        epdconfig.delay_ms(100)
-         
-        epdconfig.module_exit()
-        
-### END OF FILE ###
-

pwnagotchi/ui/hw/libs/waveshare/v1/epd2in13bc.py

@@ -1,164 +0,0 @@
-# *****************************************************************************
-# * | File        :	  epd2in13bc.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * | This version:   V4.0
-# * | Date        :   2019-06-20
-# # | Info        :   python demo
-# -----------------------------------------------------------------------------
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-from . import epdconfig
-import RPi.GPIO as GPIO
-# import numpy as np
-
-# Display resolution
-EPD_WIDTH       = 104
-EPD_HEIGHT      = 212
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = epdconfig.RST_PIN
-        self.dc_pin = epdconfig.DC_PIN
-        self.busy_pin = epdconfig.BUSY_PIN
-        self.cs_pin = epdconfig.CS_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-
-    # Hardware reset
-    def reset(self):
-        epdconfig.digital_write(self.reset_pin, GPIO.HIGH)
-        epdconfig.delay_ms(200)
-        epdconfig.digital_write(self.reset_pin, GPIO.LOW)         # module reset
-        epdconfig.delay_ms(200)
-        epdconfig.digital_write(self.reset_pin, GPIO.HIGH)
-        epdconfig.delay_ms(200)
-
-    def send_command(self, command):
-        epdconfig.digital_write(self.dc_pin, GPIO.LOW)
-        epdconfig.digital_write(self.cs_pin, GPIO.LOW)
-        epdconfig.spi_writebyte([command])
-        epdconfig.digital_write(self.cs_pin, GPIO.HIGH)
-
-    def send_data(self, data):
-        epdconfig.digital_write(self.dc_pin, GPIO.HIGH)
-        epdconfig.digital_write(self.cs_pin, GPIO.LOW)
-        epdconfig.spi_writebyte([data])
-        epdconfig.digital_write(self.cs_pin, GPIO.HIGH)
-
-    def ReadBusy(self):
-        epdconfig.delay_ms(20)
-        while(epdconfig.digital_read(self.busy_pin) == 0):      # 0: idle, 1: busy
-            epdconfig.delay_ms(100)
-
-    def init(self):
-        if (epdconfig.module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-
-        self.send_command(0x06) # BOOSTER_SOFT_START
-        self.send_data(0x17)
-        self.send_data(0x17)
-        self.send_data(0x17)
-
-        self.send_command(0x04) # POWER_ON
-        self.ReadBusy()
-
-        self.send_command(0x00) # PANEL_SETTING
-        self.send_data(0x8F)
-
-        self.send_command(0x50) # VCOM_AND_DATA_INTERVAL_SETTING
-        self.send_data(0xF0)
-
-        self.send_command(0x61) # RESOLUTION_SETTING
-        self.send_data(self.width & 0xff)
-        self.send_data(self.height >> 8)
-        self.send_data(self.height & 0xff)
-        return 0
-
-    def getbuffer(self, image):
-        buf = [0xFF] * (int(self.width/8) * self.height)
-        image_monocolor = image.convert('1')
-        imwidth, imheight = image_monocolor.size
-        pixels = image_monocolor.load()
-        if(imwidth == self.width and imheight == self.height):
-            for y in range(imheight):
-                for x in range(imwidth):
-                    # Set the bits for the column of pixels at the current position.
-                    if pixels[x, y] == 0:
-                        buf[int((x + y * self.width) / 8)] &= ~(0x80 >> (x % 8))
-        elif(imwidth == self.height and imheight == self.width):
-            for y in range(imheight):
-                for x in range(imwidth):
-                    newx = y
-                    newy = self.height - x - 1
-                    if pixels[x, y] == 0:
-                        buf[int((newx + newy*self.width) / 8)] &= ~(0x80 >> (y % 8))
-        return buf
-
-    def displayBlack(self, imageblack):
-        self.send_command(0x10)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(imageblack[i])
-        self.send_command(0x92)
-
-        self.send_command(0x12) # REFRESH
-        self.ReadBusy()
-
-    def display(self, imageblack, imagecolor):
-        self.send_command(0x10)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(imageblack[i])
-        self.send_command(0x92)
-
-        self.send_command(0x13)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(imagecolor[i])
-        self.send_command(0x92)
-
-        self.send_command(0x12) # REFRESH
-        self.ReadBusy()
-
-    def Clear(self):
-        self.send_command(0x10)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(0xFF)
-        self.send_command(0x92)
-
-        self.send_command(0x13)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(0xFF)
-        self.send_command(0x92)
-
-        self.send_command(0x12) # REFRESH
-        self.ReadBusy()
-
-    def sleep(self):
-        self.send_command(0x02) # POWER_OFF
-        self.ReadBusy()
-        self.send_command(0x07) # DEEP_SLEEP
-        self.send_data(0xA5) # check code
-
-#        epdconfig.module_exit()
-### END OF FILE ###
-

pwnagotchi/ui/hw/libs/waveshare/v1/epd2in13bcFAST.py

@@ -1,359 +0,0 @@
-# *****************************************************************************
-# * | File        :	  epd2in13d.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * | This version:   V4.0
-# * | Date        :   2019-06-20
-# # | Info        :   python demo
-# -----------------------------------------------------------------------------
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-
-# =============================================================================
-# THIS FILE HAS BEEN MODIFIED FROM ORIGINAL, IT HAS BEEN MODIFIED TO RUN THE
-# THREE COLOR WAVESHARE 2.13IN DISPLAY AT A MUCH, MUCH FASTER RATE THAN NORMAL
-# AND IT COULD DAMAGE YOUR DISPLAY. THERE IS NO WARRANTY INCLUDED AND YOU USE
-# THIS CODE AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS
-# INCLUDING BUT NOT LIMITED TO: DESTRUCTION OF YOUR DISPLAY, PI, HOUSE, CAR,
-# SPACE-TIME-CONTINUUM, OR IF THE CODE KILLS YOUR CAT. IF YOU AREN'T WILLING TO 
-# TAKE THESE RISKS, PLEASE DO NOT USE THIS CODE.
-# =============================================================================
-
-
-import logging
-from . import epdconfig
-from PIL import Image
-import RPi.GPIO as GPIO
-
-# Display resolution
-EPD_WIDTH       = 104
-EPD_HEIGHT      = 212
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = epdconfig.RST_PIN
-        self.dc_pin = epdconfig.DC_PIN
-        self.busy_pin = epdconfig.BUSY_PIN
-        self.cs_pin = epdconfig.CS_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-
-    lut_vcomDC = [  
-        0x00, 0x08, 0x00, 0x00, 0x00, 0x02,
-        0x60, 0x28, 0x28, 0x00, 0x00, 0x01,
-        0x00, 0x14, 0x00, 0x00, 0x00, 0x01,
-        0x00, 0x12, 0x12, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00,
-    ]
-
-    lut_ww = [  
-        0x40, 0x08, 0x00, 0x00, 0x00, 0x02,
-        0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
-        0x40, 0x14, 0x00, 0x00, 0x00, 0x01,
-        0xA0, 0x12, 0x12, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_bw = [  
-        0x40, 0x17, 0x00, 0x00, 0x00, 0x02,
-        0x90, 0x0F, 0x0F, 0x00, 0x00, 0x03,
-        0x40, 0x0A, 0x01, 0x00, 0x00, 0x01,
-        0xA0, 0x0E, 0x0E, 0x00, 0x00, 0x02,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_wb = [
-        0x80, 0x08, 0x00, 0x00, 0x00, 0x02,
-        0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
-        0x80, 0x14, 0x00, 0x00, 0x00, 0x01,
-        0x50, 0x12, 0x12, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_bb = [ 
-        0x80, 0x08, 0x00, 0x00, 0x00, 0x02,
-        0x90, 0x28, 0x28, 0x00, 0x00, 0x00,
-        0x80, 0x14, 0x00, 0x00, 0x00, 0x01,
-        0x50, 0x12, 0x12, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-    
-    lut_vcom1 = [  
-        0xA0, 0x10, 0x10, 0x00, 0x00, 0x02,
-        0x00, 0x10, 0x10, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00,
-    ]
-
-    lut_ww1 = [  
-        0x50, 0x01, 0x01, 0x00, 0x00, 0x01,
-        0xA0, 0x42, 0x42, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_bw1 = [  
-        0x50, 0x01, 0x01, 0x00, 0x00, 0x01,
-        0xA0, 0x42, 0x42, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_wb1 = [
-        0xA0, 0x01, 0x01, 0x00, 0x00, 0x01,
-        0x50, 0x42, 0x42, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ]
-
-    lut_bb1 = [ 
-        0xA0, 0x01, 0x01, 0x00, 0x00, 0x01,
-        0x50, 0x42, 0x42, 0x00, 0x00, 0x01,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-    ] 
-
-        
-    # Hardware reset
-    def reset(self):
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200) 
-        epdconfig.digital_write(self.reset_pin, 0)
-        epdconfig.delay_ms(10)
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(200)   
-
-    def send_command(self, command):
-        epdconfig.digital_write(self.dc_pin, 0)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([command])
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    def send_data(self, data):
-        epdconfig.digital_write(self.dc_pin, 1)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([data])
-        epdconfig.digital_write(self.cs_pin, 1)
-        
-    def ReadBusy(self):
-        logging.debug("e-Paper busy")
-        while(epdconfig.digital_read(self.busy_pin) == 0):      # 0: idle, 1: busy
-            self.send_command(0x71)
-            epdconfig.delay_ms(100)  
-        logging.debug("e-Paper busy release")
-        
-    def TurnOnDisplay(self):
-        self.send_command(0x12)
-        epdconfig.delay_ms(10)
-        self.ReadBusy()
-        
-    def init(self):
-        if (epdconfig.module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-        
-        self.send_command(0x01)	# POWER SETTING
-        self.send_data(0x03)
-        self.send_data(0x00)
-        self.send_data(0x2b)
-        self.send_data(0x2b)
-        self.send_data(0x03)
-
-        self.send_command(0x06)	# boost soft start
-        self.send_data(0x17) # A
-        self.send_data(0x17) # B
-        self.send_data(0x17) # C
-
-        self.send_command(0x04)
-        self.ReadBusy()
-
-        self.send_command(0x00)	# panel setting
-        self.send_data(0xbf) # LUT from OTP,128x296
-        self.send_data(0x0d) # VCOM to 0V fast
-
-        self.send_command(0x30)	# PLL setting
-        self.send_data(0x21) # 3a 100HZ   29 150Hz 39 200HZ	31 171HZ
-
-        self.send_command(0x61)	# resolution setting
-        self.send_data(self.width)
-        self.send_data((self.height >> 8) & 0xff)
-        self.send_data(self.height& 0xff)
-
-        self.send_command(0x82)	# vcom_DC setting
-        self.send_data(0x28)
-        return 0
-        
-    def SetFullReg(self):
-        self.send_command(0x82)
-        self.send_data(0x00)
-        self.send_command(0X50)
-        self.send_data(0x97)
-#        self.send_command(0x00)	# panel setting
-#        self.send_data(0x9f) # LUT from OTP,128x296
-
-    def SetPartReg(self):
-#        self.send_command(0x00)	# panel setting
-#        self.send_data(0xbf) # LUT from OTP,128x296
-        self.send_command(0x82)
-        self.send_data(0x03)
-        self.send_command(0X50)
-        self.send_data(0x47)
-        
-        self.send_command(0x20) # vcom
-        for count in range(0, 44):
-            self.send_data(self.lut_vcom1[count])
-        self.send_command(0x21) # ww --
-        for count in range(0, 42):
-            self.send_data(self.lut_ww1[count])
-        self.send_command(0x22) # bw r
-        for count in range(0, 42):
-            self.send_data(self.lut_bw1[count])
-        self.send_command(0x23) # wb w
-        for count in range(0, 42):
-            self.send_data(self.lut_wb1[count])
-        self.send_command(0x24) # bb b
-        for count in range(0, 42):
-            self.send_data(self.lut_bb1[count])
-
-    def getbuffer(self, image):
-        # logging.debug("bufsiz = ",int(self.width/8) * self.height)
-        buf = [0xFF] * (int(self.width/8) * self.height)
-        image_monocolor = image.convert('1')
-        imwidth, imheight = image_monocolor.size
-        pixels = image_monocolor.load()
-        # logging.debug("imwidth = %d, imheight = %d",imwidth,imheight)
-        if(imwidth == self.width and imheight == self.height):
-            logging.debug("Vertical")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    # Set the bits for the column of pixels at the current position.
-                    if pixels[x, y] == 0:
-                        buf[int((x + y * self.width) / 8)] &= ~(0x80 >> (x % 8))
-        elif(imwidth == self.height and imheight == self.width):
-            logging.debug("Horizontal")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    newx = y
-                    newy = self.height - x - 1
-                    if pixels[x, y] == 0:
-                        buf[int((newx + newy*self.width) / 8)] &= ~(0x80 >> (y % 8))
-        return buf
-
-    def display(self, image):
-        if (Image == None):
-            return
-            
-        self.send_command(0x10)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(0x00)
-        epdconfig.delay_ms(10)
-        
-        self.send_command(0x13)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(image[i])
-        epdconfig.delay_ms(10)
-        
-        self.SetFullReg()
-        self.TurnOnDisplay()
-        
-    def DisplayPartial(self, image):   
-        if (Image == None):
-            return
-            
-        self.SetPartReg()
-        self.send_command(0x91)
-        self.send_command(0x90)
-        self.send_data(0)
-        self.send_data(self.width - 1)
-
-        self.send_data(0)
-        self.send_data(0)
-        self.send_data(int(self.height / 256))
-        self.send_data(self.height % 256 - 1)
-        self.send_data(0x28)
-            
-        self.send_command(0x10)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(image[i])
-        epdconfig.delay_ms(10)
-        
-        self.send_command(0x13)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(~image[i])
-        epdconfig.delay_ms(10)
-          
-        self.TurnOnDisplay()
-        
-    def Clear(self):
-        self.send_command(0x10)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(0x00)
-        epdconfig.delay_ms(10)
-        
-        self.send_command(0x13)
-        for i in range(0, int(self.width * self.height / 8)):
-            self.send_data(0x00)
-        epdconfig.delay_ms(10)
-        
-        self.SetFullReg()
-        self.TurnOnDisplay()
-
-    def sleep(self):
-        self.send_command(0X50)
-        self.send_data(0xf7)
-        self.send_command(0X02) # power off
-        self.send_command(0X07) # deep sleep  
-        self.send_data(0xA5)
-
-        epdconfig.module_exit()
-
-### END OF FILE ###

pwnagotchi/ui/hw/libs/waveshare/v1/epdconfig.py

@@ -1,154 +0,0 @@
-# /*****************************************************************************
-# * | File        :	  epdconfig.py
-# * | Author      :   Waveshare team
-# * | Function    :   Hardware underlying interface
-# * | Info        :
-# *----------------
-# * | This version:   V1.0
-# * | Date        :   2019-06-21
-# * | Info        :   
-# ******************************************************************************
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-import os
-import logging
-import sys
-import time
-
-
-class RaspberryPi:
-    # Pin definition
-    RST_PIN         = 17
-    DC_PIN          = 25
-    CS_PIN          = 8
-    BUSY_PIN        = 24
-
-    def __init__(self):
-        import spidev
-        import RPi.GPIO
-
-        self.GPIO = RPi.GPIO
-
-        # SPI device, bus = 0, device = 0
-        self.SPI = spidev.SpiDev(0, 0)
-
-    def digital_write(self, pin, value):
-        self.GPIO.output(pin, value)
-
-    def digital_read(self, pin):
-        return self.GPIO.input(self.BUSY_PIN)
-
-    def delay_ms(self, delaytime):
-        time.sleep(delaytime / 1000.0)
-
-    def spi_writebyte(self, data):
-        self.SPI.writebytes(data)
-
-    def module_init(self):
-        self.GPIO.setmode(self.GPIO.BCM)
-        self.GPIO.setwarnings(False)
-        self.GPIO.setup(self.RST_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.DC_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.CS_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.BUSY_PIN, self.GPIO.IN)
-        self.SPI.max_speed_hz = 4000000
-        self.SPI.mode = 0b00
-        return 0
-
-    def module_exit(self):
-        logging.debug("spi end")
-        self.SPI.close()
-
-        logging.debug("close 5V, Module enters 0 power consumption ...")
-        self.GPIO.output(self.RST_PIN, 0)
-        self.GPIO.output(self.DC_PIN, 0)
-
-        self.GPIO.cleanup()
-
-
-class JetsonNano:
-    # Pin definition
-    RST_PIN         = 17
-    DC_PIN          = 25
-    CS_PIN          = 8
-    BUSY_PIN        = 24
-
-    def __init__(self):
-        import ctypes
-        find_dirs = [
-            os.path.dirname(os.path.realpath(__file__)),
-            '/usr/local/lib',
-            '/usr/lib',
-        ]
-        self.SPI = None
-        for find_dir in find_dirs:
-            so_filename = os.path.join(find_dir, 'sysfs_software_spi.so')
-            if os.path.exists(so_filename):
-                self.SPI = ctypes.cdll.LoadLibrary(so_filename)
-                break
-        if self.SPI is None:
-            raise RuntimeError('Cannot find sysfs_software_spi.so')
-
-        import Jetson.GPIO
-        self.GPIO = Jetson.GPIO
-
-    def digital_write(self, pin, value):
-        self.GPIO.output(pin, value)
-
-    def digital_read(self, pin):
-        return self.GPIO.input(self.BUSY_PIN)
-
-    def delay_ms(self, delaytime):
-        time.sleep(delaytime / 1000.0)
-
-    def spi_writebyte(self, data):
-        self.SPI.SYSFS_software_spi_transfer(data[0])
-
-    def module_init(self):
-        self.GPIO.setmode(self.GPIO.BCM)
-        self.GPIO.setwarnings(False)
-        self.GPIO.setup(self.RST_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.DC_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.CS_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.BUSY_PIN, self.GPIO.IN)
-        self.SPI.SYSFS_software_spi_begin()
-        return 0
-
-    def module_exit(self):
-        logging.debug("spi end")
-        self.SPI.SYSFS_software_spi_end()
-
-        logging.debug("close 5V, Module enters 0 power consumption ...")
-        self.GPIO.output(self.RST_PIN, 0)
-        self.GPIO.output(self.DC_PIN, 0)
-
-        self.GPIO.cleanup()
-
-
-if os.path.exists('/sys/bus/platform/drivers/gpiomem-bcm2835'):
-    implementation = RaspberryPi()
-else:
-    implementation = JetsonNano()
-
-for func in [x for x in dir(implementation) if not x.startswith('_')]:
-    setattr(sys.modules[__name__], func, getattr(implementation, func))
-
-
-### END OF FILE ###

pwnagotchi/ui/hw/libs/waveshare/v2/waveshare.py

@@ -1,338 +0,0 @@
-# //*****************************************************************************
-# * | File        :	  epd2in13.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * |	This version:   V3.0
-# * | Date        :   2018-11-01
-# * | Info        :   python2 demo
-# * 1.Remove:
-#   digital_write(self, pin, value)
-#   digital_read(self, pin)
-#   delay_ms(self, delaytime)
-#   set_lut(self, lut)
-#   self.lut = self.lut_full_update
-# * 2.Change:
-#   display_frame -> TurnOnDisplay
-#   set_memory_area -> SetWindow
-#   set_memory_pointer -> SetCursor
-# * 3.How to use
-#   epd = epd2in13.EPD()
-#   epd.init(epd.lut_full_update)
-#   image = Image.new('1', (epd2in13.EPD_WIDTH, epd2in13.EPD_HEIGHT), 255)
-#   ...
-#   drawing ......
-#   ...
-#   epd.display(getbuffer(image))
-# ******************************************************************************//
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and//or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-import time
-import spidev
-import RPi.GPIO as GPIO
-from PIL import Image
-
-# Pin definition
-RST_PIN = 17
-DC_PIN = 25
-CS_PIN = 8
-BUSY_PIN = 24
-
-# SPI device, bus = 0, device = 0
-SPI = spidev.SpiDev(0, 0)
-
-
-def digital_write(pin, value):
-    GPIO.output(pin, value)
-
-
-def digital_read(pin):
-    return GPIO.input(BUSY_PIN)
-
-
-def delay_ms(delaytime):
-    time.sleep(delaytime / 1000.0)
-
-
-def spi_writebyte(data):
-    SPI.writebytes(data)
-
-
-def module_init():
-    GPIO.setmode(GPIO.BCM)
-    GPIO.setwarnings(False)
-    GPIO.setup(RST_PIN, GPIO.OUT)
-    GPIO.setup(DC_PIN, GPIO.OUT)
-    GPIO.setup(CS_PIN, GPIO.OUT)
-    GPIO.setup(BUSY_PIN, GPIO.IN)
-    SPI.max_speed_hz = 2000000
-    SPI.mode = 0b00
-    return 0;
-
-
-# Display resolution
-EPD_WIDTH = 122
-EPD_HEIGHT = 250
-
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = RST_PIN
-        self.dc_pin = DC_PIN
-        self.busy_pin = BUSY_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-
-    FULL_UPDATE = 0
-    PART_UPDATE = 1
-    lut_full_update = [
-        0x80, 0x60, 0x40, 0x00, 0x00, 0x00, 0x00,  # LUT0: BB:     VS 0 ~7
-        0x10, 0x60, 0x20, 0x00, 0x00, 0x00, 0x00,  # LUT1: BW:     VS 0 ~7
-        0x80, 0x60, 0x40, 0x00, 0x00, 0x00, 0x00,  # LUT2: WB:     VS 0 ~7
-        0x10, 0x60, 0x20, 0x00, 0x00, 0x00, 0x00,  # LUT3: WW:     VS 0 ~7
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  # LUT4: VCOM:   VS 0 ~7
-
-        0x03, 0x03, 0x00, 0x00, 0x02,  # TP0 A~D RP0
-        0x09, 0x09, 0x00, 0x00, 0x02,  # TP1 A~D RP1
-        0x03, 0x03, 0x00, 0x00, 0x02,  # TP2 A~D RP2
-        0x00, 0x00, 0x00, 0x00, 0x00,  # TP3 A~D RP3
-        0x00, 0x00, 0x00, 0x00, 0x00,  # TP4 A~D RP4
-        0x00, 0x00, 0x00, 0x00, 0x00,  # TP5 A~D RP5
-        0x00, 0x00, 0x00, 0x00, 0x00,  # TP6 A~D RP6
-
-        0x15, 0x41, 0xA8, 0x32, 0x30, 0x0A,
-    ]
-
-    lut_partial_update = [  # 20 bytes
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  # LUT0: BB:     VS 0 ~7
-        0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  # LUT1: BW:     VS 0 ~7
-        0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  # LUT2: WB:     VS 0 ~7
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  # LUT3: WW:     VS 0 ~7
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  # LUT4: VCOM:   VS 0 ~7
-
-        0x0A, 0x00, 0x00, 0x00, 0x00,  # TP0 A~D RP0
-        0x00, 0x00, 0x00, 0x00, 0x00,  # TP1 A~D RP1
-        0x00, 0x00, 0x00, 0x00, 0x00,  # TP2 A~D RP2
-        0x00, 0x00, 0x00, 0x00, 0x00,  # TP3 A~D RP3
-        0x00, 0x00, 0x00, 0x00, 0x00,  # TP4 A~D RP4
-        0x00, 0x00, 0x00, 0x00, 0x00,  # TP5 A~D RP5
-        0x00, 0x00, 0x00, 0x00, 0x00,  # TP6 A~D RP6
-
-        0x15, 0x41, 0xA8, 0x32, 0x30, 0x0A,
-    ]
-
-    # Hardware reset
-    def reset(self):
-        digital_write(self.reset_pin, GPIO.HIGH)
-        delay_ms(200)
-        digital_write(self.reset_pin, GPIO.LOW)  # module reset
-        delay_ms(200)
-        digital_write(self.reset_pin, GPIO.HIGH)
-        delay_ms(200)
-
-    def send_command(self, command):
-        digital_write(self.dc_pin, GPIO.LOW)
-        spi_writebyte([command])
-
-    def send_data(self, data):
-        digital_write(self.dc_pin, GPIO.HIGH)
-        spi_writebyte([data])
-
-    def wait_until_idle(self):
-        while (digital_read(self.busy_pin) == 1):  # 0: idle, 1: busy
-            delay_ms(100)
-
-    def TurnOnDisplay(self):
-        self.send_command(0x22)
-        self.send_data(0xC7)
-        self.send_command(0x20)
-        self.wait_until_idle()
-
-    def init(self, update):
-        if (module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-        if (update == self.FULL_UPDATE):
-            self.wait_until_idle()
-            self.send_command(0x12)  # soft reset
-            self.wait_until_idle()
-
-            self.send_command(0x74)  # set analog block control
-            self.send_data(0x54)
-            self.send_command(0x7E)  # set digital block control
-            self.send_data(0x3B)
-
-            self.send_command(0x01)  # Driver output control
-            self.send_data(0xF9)
-            self.send_data(0x00)
-            self.send_data(0x00)
-
-            self.send_command(0x11)  # data entry mode
-            self.send_data(0x01)
-
-            self.send_command(0x44)  # set Ram-X address start//end position
-            self.send_data(0x00)
-            self.send_data(0x0F)  # 0x0C-->(15+1)*8=128
-
-            self.send_command(0x45)  # set Ram-Y address start//end position
-            self.send_data(0xF9)  # 0xF9-->(249+1)=250
-            self.send_data(0x00)
-            self.send_data(0x00)
-            self.send_data(0x00)
-
-            self.send_command(0x3C)  # BorderWavefrom
-            self.send_data(0x03)
-
-            self.send_command(0x2C)  # VCOM Voltage
-            self.send_data(0x55)  #
-
-            self.send_command(0x03)
-            self.send_data(self.lut_full_update[70])
-
-            self.send_command(0x04)  #
-            self.send_data(self.lut_full_update[71])
-            self.send_data(self.lut_full_update[72])
-            self.send_data(self.lut_full_update[73])
-
-            self.send_command(0x3A)  # Dummy Line
-            self.send_data(self.lut_full_update[74])
-            self.send_command(0x3B)  # Gate time
-            self.send_data(self.lut_full_update[75])
-
-            self.send_command(0x32)
-            for count in range(70):
-                self.send_data(self.lut_full_update[count])
-
-            self.send_command(0x4E)  # set RAM x address count to 0
-            self.send_data(0x00)
-            self.send_command(0x4F)  # set RAM y address count to 0X127
-            self.send_data(0xF9)
-            self.send_data(0x00)
-            self.wait_until_idle()
-        else:
-            self.send_command(0x2C)  # VCOM Voltage
-            self.send_data(0x26)
-
-            self.wait_until_idle()
-
-            self.send_command(0x32)
-            for count in range(70):
-                self.send_data(self.lut_partial_update[count])
-
-            self.send_command(0x37)
-            self.send_data(0x00)
-            self.send_data(0x00)
-            self.send_data(0x00)
-            self.send_data(0x00)
-            self.send_data(0x40)
-            self.send_data(0x00)
-            self.send_data(0x00)
-
-            self.send_command(0x22)
-            self.send_data(0xC0)
-            self.send_command(0x20)
-            self.wait_until_idle()
-
-            self.send_command(0x3C)  # BorderWavefrom
-            self.send_data(0x01)
-        return 0
-
-    def getbuffer(self, image):
-        if self.width % 8 == 0:
-            linewidth = self.width // 8
-        else:
-            linewidth = self.width // 8 + 1
-
-        buf = [0xFF] * (linewidth * self.height)
-        image_monocolor = image.convert('1')
-        imwidth, imheight = image_monocolor.size
-        pixels = image_monocolor.load()
-
-        if (imwidth == self.width and imheight == self.height):
-            # print("Vertical")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    if pixels[x, y] == 0:
-                        x = imwidth - x
-                        buf[x // 8 + y * linewidth] &= ~(0x80 >> (x % 8))
-        elif (imwidth == self.height and imheight == self.width):
-            # print("Horizontal")
-            for y in range(imheight):
-                for x in range(imwidth):
-                    newx = y
-                    newy = self.height - x - 1
-                    if pixels[x, y] == 0:
-                        newy = imwidth - newy - 1
-                        buf[newx // 8 + newy * linewidth] &= ~(0x80 >> (y % 8))
-        return buf
-
-    def display(self, image):
-        if self.width % 8 == 0:
-            linewidth = self.width // 8
-        else:
-            linewidth = self.width // 8 + 1
-
-        self.send_command(0x24)
-        for j in range(0, self.height):
-            for i in range(0, linewidth):
-                self.send_data(image[i + j * linewidth])
-        self.TurnOnDisplay()
-
-    def displayPartial(self, image):
-        if self.width % 8 == 0:
-            linewidth = self.width // 8
-        else:
-            linewidth = self.width // 8 + 1
-
-        self.send_command(0x24)
-        for j in range(0, self.height):
-            for i in range(0, linewidth):
-                self.send_data(image[i + j * linewidth])
-        self.send_command(0x26)
-        for j in range(0, self.height):
-            for i in range(0, linewidth):
-                self.send_data(~image[i + j * linewidth])
-        self.TurnOnDisplay()
-
-    def Clear(self, color):
-        if self.width % 8 == 0:
-            linewidth = self.width // 8
-        else:
-            linewidth = self.width // 8 + 1
-        # print(linewidth)
-
-        self.send_command(0x24)
-        for j in range(0, self.height):
-            for i in range(0, linewidth):
-                self.send_data(color)
-        self.TurnOnDisplay()
-
-    def sleep(self):
-        self.send_command(0x22)  # POWER OFF
-        self.send_data(0xC3)
-        self.send_command(0x20)
-
-        self.send_command(0x10)  # enter deep sleep
-        self.send_data(0x01)
-        delay_ms(100)
-
-    ### END OF FILE ###

pwnagotchi/ui/hw/libs/waveshare/v2in9_v2/epd2in9V2.py

@@ -28,7 +28,7 @@
 #
 
 import logging
-from . import epdconfig
+from .. import epdconfig
 
 # Display resolution
 EPD_WIDTH = 128

pwnagotchi/ui/hw/libs/waveshare/v2in9d/epd2in9d.py

@@ -33,8 +33,6 @@
 from distutils.command.build_scripts import build_scripts
 import logging
 from .. import epdconfig
-from PIL import Image
-import RPi.GPIO as GPIO
 
 # Display resolution
 EPD_WIDTH = 128

pwnagotchi/ui/hw/libs/waveshare/v3/epdconfig.py

@@ -1,154 +0,0 @@
-# /*****************************************************************************
-# * | File        :	  epdconfig.py
-# * | Author      :   Waveshare team
-# * | Function    :   Hardware underlying interface
-# * | Info        :
-# *----------------
-# * | This version:   V1.0
-# * | Date        :   2019-06-21
-# * | Info        :   
-# ******************************************************************************
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-import os
-import logging
-import sys
-import time
-
-
-class RaspberryPi:
-    # Pin definition
-    RST_PIN         = 17
-    DC_PIN          = 25
-    CS_PIN          = 8
-    BUSY_PIN        = 24
-
-    def __init__(self):
-        import spidev
-        import RPi.GPIO
-
-        self.GPIO = RPi.GPIO
-
-        # SPI device, bus = 0, device = 0
-        self.SPI = spidev.SpiDev(0, 0)
-
-    def digital_write(self, pin, value):
-        self.GPIO.output(pin, value)
-
-    def digital_read(self, pin):
-        return self.GPIO.input(pin)
-
-    def delay_ms(self, delaytime):
-        time.sleep(delaytime / 1000.0)
-
-    def spi_writebyte(self, data):
-        self.SPI.writebytes(data)
-
-    def module_init(self):
-        self.GPIO.setmode(self.GPIO.BCM)
-        self.GPIO.setwarnings(False)
-        self.GPIO.setup(self.RST_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.DC_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.CS_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.BUSY_PIN, self.GPIO.IN)
-        self.SPI.max_speed_hz = 4000000
-        self.SPI.mode = 0b00
-        return 0
-
-    def module_exit(self):
-        logging.debug("spi end")
-        self.SPI.close()
-
-        logging.debug("close 5V, Module enters 0 power consumption ...")
-        self.GPIO.output(self.RST_PIN, 0)
-        self.GPIO.output(self.DC_PIN, 0)
-
-        self.GPIO.cleanup()
-
-
-class JetsonNano:
-    # Pin definition
-    RST_PIN         = 17
-    DC_PIN          = 25
-    CS_PIN          = 8
-    BUSY_PIN        = 24
-
-    def __init__(self):
-        import ctypes
-        find_dirs = [
-            os.path.dirname(os.path.realpath(__file__)),
-            '/usr/local/lib',
-            '/usr/lib',
-        ]
-        self.SPI = None
-        for find_dir in find_dirs:
-            so_filename = os.path.join(find_dir, 'sysfs_software_spi.so')
-            if os.path.exists(so_filename):
-                self.SPI = ctypes.cdll.LoadLibrary(so_filename)
-                break
-        if self.SPI is None:
-            raise RuntimeError('Cannot find sysfs_software_spi.so')
-
-        import Jetson.GPIO
-        self.GPIO = Jetson.GPIO
-
-    def digital_write(self, pin, value):
-        self.GPIO.output(pin, value)
-
-    def digital_read(self, pin):
-        return self.GPIO.input(self.BUSY_PIN)
-
-    def delay_ms(self, delaytime):
-        time.sleep(delaytime / 1000.0)
-
-    def spi_writebyte(self, data):
-        self.SPI.SYSFS_software_spi_transfer(data[0])
-
-    def module_init(self):
-        self.GPIO.setmode(self.GPIO.BCM)
-        self.GPIO.setwarnings(False)
-        self.GPIO.setup(self.RST_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.DC_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.CS_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.BUSY_PIN, self.GPIO.IN)
-        self.SPI.SYSFS_software_spi_begin()
-        return 0
-
-    def module_exit(self):
-        logging.debug("spi end")
-        self.SPI.SYSFS_software_spi_end()
-
-        logging.debug("close 5V, Module enters 0 power consumption ...")
-        self.GPIO.output(self.RST_PIN, 0)
-        self.GPIO.output(self.DC_PIN, 0)
-
-        self.GPIO.cleanup()
-
-
-if os.path.exists('/sys/bus/platform/drivers/gpiomem-bcm2835'):
-    implementation = RaspberryPi()
-else:
-    implementation = JetsonNano()
-
-for func in [x for x in dir(implementation) if not x.startswith('_')]:
-    setattr(sys.modules[__name__], func, getattr(implementation, func))
-
-
-### END OF FILE ###

pwnagotchi/ui/hw/libs/waveshare/v4/epd2in13_V4.py

@@ -1,350 +0,0 @@
-# *****************************************************************************
-# * | File        :	  epd2in13_V4.py
-# * | Author      :   Waveshare team
-# * | Function    :   Electronic paper driver
-# * | Info        :
-# *----------------
-# * | This version:   V1.0
-# * | Date        :   2023-06-25
-# # | Info        :   python demo
-# -----------------------------------------------------------------------------
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-
-import logging
-from . import epdconfig
-
-# Display resolution
-EPD_WIDTH = 122
-EPD_HEIGHT = 250
-
-logger = logging.getLogger(__name__)
-
-
-class EPD:
-    def __init__(self):
-        self.reset_pin = epdconfig.RST_PIN
-        self.dc_pin = epdconfig.DC_PIN
-        self.busy_pin = epdconfig.BUSY_PIN
-        self.cs_pin = epdconfig.CS_PIN
-        self.width = EPD_WIDTH
-        self.height = EPD_HEIGHT
-
-    '''
-    function :Hardware reset
-    parameter:
-    '''
-    def reset(self):
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(20)
-        epdconfig.digital_write(self.reset_pin, 0)
-        epdconfig.delay_ms(2)
-        epdconfig.digital_write(self.reset_pin, 1)
-        epdconfig.delay_ms(20)
-
-    '''
-    function :send command
-    parameter:
-     command : Command register
-    '''
-    def send_command(self, command):
-        epdconfig.digital_write(self.dc_pin, 0)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([command])
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    '''
-    function :send data
-    parameter:
-     data : Write data
-    '''
-    def send_data(self, data):
-        epdconfig.digital_write(self.dc_pin, 1)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte([data])
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    # send a lot of data
-    def send_data2(self, data):
-        epdconfig.digital_write(self.dc_pin, 1)
-        epdconfig.digital_write(self.cs_pin, 0)
-        epdconfig.spi_writebyte2(data)
-        epdconfig.digital_write(self.cs_pin, 1)
-
-    '''
-    function :Wait until the busy_pin goes LOW
-    parameter:
-    '''
-    def ReadBusy(self):
-        logger.debug("e-Paper busy")
-        while(epdconfig.digital_read(self.busy_pin) == 1):      # 0: idle, 1: busy
-            epdconfig.delay_ms(10)
-        logger.debug("e-Paper busy release")
-
-    '''
-    function : Turn On Display
-    parameter:
-    '''
-    def TurnOnDisplay(self):
-        self.send_command(0x22) # Display Update Control
-        self.send_data(0xf7)
-        self.send_command(0x20) # Activate Display Update Sequence
-        self.ReadBusy()
-
-    '''
-    function : Turn On Display Fast
-    parameter:
-    '''
-    def TurnOnDisplay_Fast(self):
-        self.send_command(0x22) # Display Update Control
-        self.send_data(0xC7)    # fast:0x0c, quality:0x0f, 0xcf
-        self.send_command(0x20) # Activate Display Update Sequence
-        self.ReadBusy()
-
-    '''
-    function : Turn On Display Part
-    parameter:
-    '''
-    def TurnOnDisplayPart(self):
-        self.send_command(0x22) # Display Update Control
-        self.send_data(0xff)    # fast:0x0c, quality:0x0f, 0xcf
-        self.send_command(0x20) # Activate Display Update Sequence
-        self.ReadBusy()
-
-
-    '''
-    function : Setting the display window
-    parameter:
-        xstart : X-axis starting position
-        ystart : Y-axis starting position
-        xend : End position of X-axis
-        yend : End position of Y-axis
-    '''
-    def SetWindow(self, x_start, y_start, x_end, y_end):
-        self.send_command(0x44) # SET_RAM_X_ADDRESS_START_END_POSITION
-        # x point must be the multiple of 8 or the last 3 bits will be ignored
-        self.send_data((x_start>>3) & 0xFF)
-        self.send_data((x_end>>3) & 0xFF)
-
-        self.send_command(0x45) # SET_RAM_Y_ADDRESS_START_END_POSITION
-        self.send_data(y_start & 0xFF)
-        self.send_data((y_start >> 8) & 0xFF)
-        self.send_data(y_end & 0xFF)
-        self.send_data((y_end >> 8) & 0xFF)
-
-    '''
-    function : Set Cursor
-    parameter:
-        x : X-axis starting position
-        y : Y-axis starting position
-    '''
-    def SetCursor(self, x, y):
-        self.send_command(0x4E) # SET_RAM_X_ADDRESS_COUNTER
-        # x point must be the multiple of 8 or the last 3 bits will be ignored
-        self.send_data(x & 0xFF)
-
-        self.send_command(0x4F) # SET_RAM_Y_ADDRESS_COUNTER
-        self.send_data(y & 0xFF)
-        self.send_data((y >> 8) & 0xFF)
-
-    '''
-    function : Initialize the e-Paper register
-    parameter:
-    '''
-    def init(self):
-        if (epdconfig.module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-
-        self.ReadBusy()
-        self.send_command(0x12)  #SWRESET
-        self.ReadBusy()
-
-        self.send_command(0x01) #Driver output control
-        self.send_data(0xf9)
-        self.send_data(0x00)
-        self.send_data(0x00)
-
-        self.send_command(0x11) #data entry mode
-        self.send_data(0x03)
-
-        self.SetWindow(0, 0, self.width-1, self.height-1)
-        self.SetCursor(0, 0)
-
-        self.send_command(0x3c)
-        self.send_data(0x05)
-
-        self.send_command(0x21) #  Display update control
-        self.send_data(0x00)
-        self.send_data(0x80)
-
-        self.send_command(0x18)
-        self.send_data(0x80)
-
-        self.ReadBusy()
-
-        return 0
-
-    '''
-    function : Initialize the e-Paper fast register
-    parameter:
-    '''
-    def init_fast(self):
-        if (epdconfig.module_init() != 0):
-            return -1
-        # EPD hardware init start
-        self.reset()
-
-        self.send_command(0x12)  #SWRESET
-        self.ReadBusy()
-
-        self.send_command(0x18) # Read built-in temperature sensor
-        self.send_command(0x80)
-
-        self.send_command(0x11) # data entry mode
-        self.send_data(0x03)
-
-        self.SetWindow(0, 0, self.width-1, self.height-1)
-        self.SetCursor(0, 0)
-
-        self.send_command(0x22) # Load temperature value
-        self.send_data(0xB1)
-        self.send_command(0x20)
-        self.ReadBusy()
-
-        self.send_command(0x1A) # Write to temperature register
-        self.send_data(0x64)
-        self.send_data(0x00)
-
-        self.send_command(0x22) # Load temperature value
-        self.send_data(0x91)
-        self.send_command(0x20)
-        self.ReadBusy()
-
-        return 0
-    '''
-    function : Display images
-    parameter:
-        image : Image data
-    '''
-    def getbuffer(self, image):
-        img = image
-        imwidth, imheight = img.size
-        if(imwidth == self.width and imheight == self.height):
-            img = img.convert('1')
-        elif(imwidth == self.height and imheight == self.width):
-            # image has correct dimensions, but needs to be rotated
-            img = img.rotate(90, expand=True).convert('1')
-        else:
-            logger.warning("Wrong image dimensions: must be " + str(self.width) + "x" + str(self.height))
-            # return a blank buffer
-            return [0x00] * (int(self.width/8) * self.height)
-
-        buf = bytearray(img.tobytes('raw'))
-        return buf
-
-    '''
-    function : Sends the image buffer in RAM to e-Paper and displays
-    parameter:
-        image : Image data
-    '''
-    def display(self, image):
-        self.send_command(0x24)
-        self.send_data2(image)
-        self.TurnOnDisplay()
-
-    '''
-    function : Sends the image buffer in RAM to e-Paper and fast displays
-    parameter:
-        image : Image data
-    '''
-    def display_fast(self, image):
-        self.send_command(0x24)
-        self.send_data2(image)
-        self.TurnOnDisplay_Fast()
-    '''
-    function : Sends the image buffer in RAM to e-Paper and partial refresh
-    parameter:
-        image : Image data
-    '''
-    def displayPartial(self, image):
-        epdconfig.digital_write(self.reset_pin, 0)
-        epdconfig.delay_ms(1)
-        epdconfig.digital_write(self.reset_pin, 1)
-
-        self.send_command(0x3C) # BorderWavefrom
-        self.send_data(0x80)
-
-        self.send_command(0x01) # Driver output control
-        self.send_data(0xF9)
-        self.send_data(0x00)
-        self.send_data(0x00)
-
-        self.send_command(0x11) # data entry mode
-        self.send_data(0x03)
-
-        self.SetWindow(0, 0, self.width - 1, self.height - 1)
-        self.SetCursor(0, 0)
-
-        self.send_command(0x24) # WRITE_RAM
-        self.send_data2(image)
-        self.TurnOnDisplayPart()
-
-    '''
-    function : Refresh a base image
-    parameter:
-        image : Image data
-    '''
-    def displayPartBaseImage(self, image):
-        self.send_command(0x24)
-        self.send_data2(image)
-
-        self.send_command(0x26)
-        self.send_data2(image)
-        self.TurnOnDisplay()
-
-    '''
-    function : Clear screen
-    parameter:
-    '''
-    def Clear(self, color=0xFF):
-        if self.width%8 == 0:
-            linewidth = int(self.width/8)
-        else:
-            linewidth = int(self.width/8) + 1
-        # logger.debug(linewidth)
-
-        self.send_command(0x24)
-        self.send_data2([color] * int(self.height * linewidth))
-        self.TurnOnDisplay()
-
-    '''
-    function : Enter sleep mode
-    parameter:
-    '''
-    def sleep(self):
-        self.send_command(0x10) #enter deep sleep
-        self.send_data(0x01)
-
-        epdconfig.delay_ms(2000)
-        epdconfig.module_exit()
-
-### END OF FILE ###

pwnagotchi/ui/hw/libs/waveshare/v4/epdconfig.py

@@ -1,243 +0,0 @@
-# /*****************************************************************************
-# * | File        :	  epdconfig.py
-# * | Author      :   Waveshare team
-# * | Function    :   Hardware underlying interface
-# * | Info        :
-# *----------------
-# * | This version:   V1.2
-# * | Date        :   2022-10-29
-# * | Info        :
-# ******************************************************************************
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documnetation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to  whom the Software is
-# furished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#
-
-import os
-import logging
-import sys
-import time
-
-logger = logging.getLogger(__name__)
-
-
-class RaspberryPi:
-    # Pin definition
-    RST_PIN  = 17
-    DC_PIN   = 25
-    CS_PIN   = 8
-    BUSY_PIN = 24
-    PWR_PIN  = 18
-
-    def __init__(self):
-        import spidev
-        import RPi.GPIO
-
-        self.GPIO = RPi.GPIO
-        self.SPI = spidev.SpiDev()
-
-    def digital_write(self, pin, value):
-        self.GPIO.output(pin, value)
-
-    def digital_read(self, pin):
-        return self.GPIO.input(pin)
-
-    def delay_ms(self, delaytime):
-        time.sleep(delaytime / 1000.0)
-
-    def spi_writebyte(self, data):
-        self.SPI.writebytes(data)
-
-    def spi_writebyte2(self, data):
-        self.SPI.writebytes2(data)
-
-    def module_init(self):
-        self.GPIO.setmode(self.GPIO.BCM)
-        self.GPIO.setwarnings(False)
-        self.GPIO.setup(self.RST_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.DC_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.CS_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.PWR_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.BUSY_PIN, self.GPIO.IN)
-
-        self.GPIO.output(self.PWR_PIN, 1)
-
-        # SPI device, bus = 0, device = 0
-        self.SPI.open(0, 0)
-        self.SPI.max_speed_hz = 4000000
-        self.SPI.mode = 0b00
-        return 0
-
-    def module_exit(self):
-        logger.debug("spi end")
-        self.SPI.close()
-
-        logger.debug("close 5V, Module enters 0 power consumption ...")
-        self.GPIO.output(self.RST_PIN, 0)
-        self.GPIO.output(self.DC_PIN, 0)
-        self.GPIO.output(self.PWR_PIN, 0)
-
-        self.GPIO.cleanup([self.RST_PIN, self.DC_PIN, self.CS_PIN, self.BUSY_PIN, self.PWR_PIN])
-
-
-class JetsonNano:
-    # Pin definition
-    RST_PIN  = 17
-    DC_PIN   = 25
-    CS_PIN   = 8
-    BUSY_PIN = 24
-    PWR_PIN  = 18
-
-    def __init__(self):
-        import ctypes
-        find_dirs = [
-            os.path.dirname(os.path.realpath(__file__)),
-            '/usr/local/lib',
-            '/usr/lib',
-        ]
-        self.SPI = None
-        for find_dir in find_dirs:
-            so_filename = os.path.join(find_dir, 'sysfs_software_spi.so')
-            if os.path.exists(so_filename):
-                self.SPI = ctypes.cdll.LoadLibrary(so_filename)
-                break
-        if self.SPI is None:
-            raise RuntimeError('Cannot find sysfs_software_spi.so')
-
-        import Jetson.GPIO
-        self.GPIO = Jetson.GPIO
-
-    def digital_write(self, pin, value):
-        self.GPIO.output(pin, value)
-
-    def digital_read(self, pin):
-        return self.GPIO.input(self.BUSY_PIN)
-
-    def delay_ms(self, delaytime):
-        time.sleep(delaytime / 1000.0)
-
-    def spi_writebyte(self, data):
-        self.SPI.SYSFS_software_spi_transfer(data[0])
-
-    def spi_writebyte2(self, data):
-        for i in range(len(data)):
-            self.SPI.SYSFS_software_spi_transfer(data[i])
-
-    def module_init(self):
-        self.GPIO.setmode(self.GPIO.BCM)
-        self.GPIO.setwarnings(False)
-        self.GPIO.setup(self.RST_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.DC_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.CS_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.PWR_PIN, self.GPIO.OUT)
-        self.GPIO.setup(self.BUSY_PIN, self.GPIO.IN)
-
-        self.GPIO.output(self.PWR_PIN, 1)
-
-        self.SPI.SYSFS_software_spi_begin()
-        return 0
-
-    def module_exit(self):
-        logger.debug("spi end")
-        self.SPI.SYSFS_software_spi_end()
-
-        logger.debug("close 5V, Module enters 0 power consumption ...")
-        self.GPIO.output(self.RST_PIN, 0)
-        self.GPIO.output(self.DC_PIN, 0)
-        self.GPIO.output(self.PWR_PIN, 0)
-
-        self.GPIO.cleanup([self.RST_PIN, self.DC_PIN, self.CS_PIN, self.BUSY_PIN, self.PWR_PIN])
-
-
-class SunriseX3:
-    # Pin definition
-    RST_PIN  = 17
-    DC_PIN   = 25
-    CS_PIN   = 8
-    BUSY_PIN = 24
-    PWR_PIN  = 18
-    Flag     = 0
-
-    def __init__(self):
-        import spidev
-        import Hobot.GPIO
-
-        self.GPIO = Hobot.GPIO
-        self.SPI = spidev.SpiDev()
-
-    def digital_write(self, pin, value):
-        self.GPIO.output(pin, value)
-
-    def digital_read(self, pin):
-        return self.GPIO.input(pin)
-
-    def delay_ms(self, delaytime):
-        time.sleep(delaytime / 1000.0)
-
-    def spi_writebyte(self, data):
-        self.SPI.writebytes(data)
-
-    def spi_writebyte2(self, data):
-        # for i in range(len(data)):
-        #     self.SPI.writebytes([data[i]])
-        self.SPI.xfer3(data)
-
-    def module_init(self):
-        if self.Flag == 0:
-            self.Flag = 1
-            self.GPIO.setmode(self.GPIO.BCM)
-            self.GPIO.setwarnings(False)
-            self.GPIO.setup(self.RST_PIN, self.GPIO.OUT)
-            self.GPIO.setup(self.DC_PIN, self.GPIO.OUT)
-            self.GPIO.setup(self.CS_PIN, self.GPIO.OUT)
-            self.GPIO.setup(self.PWR_PIN, self.GPIO.OUT)
-            self.GPIO.setup(self.BUSY_PIN, self.GPIO.IN)
-
-            self.GPIO.output(self.PWR_PIN, 1)
-
-            # SPI device, bus = 0, device = 0
-            self.SPI.open(2, 0)
-            self.SPI.max_speed_hz = 4000000
-            self.SPI.mode = 0b00
-            return 0
-        else:
-            return 0
-
-    def module_exit(self):
-        logger.debug("spi end")
-        self.SPI.close()
-
-        logger.debug("close 5V, Module enters 0 power consumption ...")
-        self.Flag = 0
-        self.GPIO.output(self.RST_PIN, 0)
-        self.GPIO.output(self.DC_PIN, 0)
-        self.GPIO.output(self.PWR_PIN, 0)
-
-        self.GPIO.cleanup([self.RST_PIN, self.DC_PIN, self.CS_PIN, self.BUSY_PIN], self.PWR_PIN)
-
-
-if os.path.exists('/sys/bus/platform/drivers/gpiomem-bcm2835'):
-    implementation = RaspberryPi()
-elif os.path.exists('/sys/bus/platform/drivers/gpio-x3'):
-    implementation = SunriseX3()
-else:
-    implementation = JetsonNano()
-
-for func in [x for x in dir(implementation) if not x.startswith('_')]:
-    setattr(sys.modules[__name__], func, getattr(implementation, func))
-
-### END OF FILE ###

pwnagotchi/ui/hw/libs/waveshare/v4in26/epd4in26.py

@@ -29,7 +29,7 @@
 
 
 import logging
-from . import epdconfig
+from .. import epdconfig
 
 # Display resolution
 EPD_WIDTH = 800

pwnagotchi/ui/hw/libs/waveshare/v7in5_HD/epd7in5_HD.py

@@ -29,7 +29,7 @@
 
 
 import logging
-from . import epdconfig
+from .. import epdconfig
 
 # Display resolution
 EPD_WIDTH = 800

pwnagotchi/ui/hw/waveshare3in52.py

@@ -42,6 +42,5 @@ class Waveshare3in52(DisplayImpl):
         self._display.display(buf)
         self._display.refresh()
 
-
     def clear(self):
         self._display.Clear()

pwnagotchi/ui/web/server.py

@@ -47,6 +47,6 @@ class Server:
             formatServerIpAddress = '[::]' if self._address == '::' else self._address
             logging.info("web ui available at http://%s:%d/" % (formatServerIpAddress, self._port))
 
-            app.run(host=self._address, port=self._port, debug=False)
+            app.run(host=self._address, port=self._port)
         else:
             logging.info("could not get ip of usb0, video server not starting")

pwnagotchi/utils.py

@@ -242,6 +242,9 @@ def load_config(args):
     if config['ui']['display']['type'] in ('inky', 'inkyphat'):
         config['ui']['display']['type'] = 'inky'
 
+    elif config['ui']['display']['type'] in ('dummy', 'dummydisplay'):
+        config['ui']['display']['type'] = 'dummydisplay'
+
     elif config['ui']['display']['type'] in ('papirus', 'papi'):
         config['ui']['display']['type'] = 'papirus'
 
@@ -283,6 +286,13 @@ def load_config(args):
 
     # E-INK DISPLAYS ------------------------------------------------------------------------
 
+    # Adafruit
+
+    elif config['ui']['display']['type'] in ('adafruit2in13v3', 'af213v3', 'adafruit_213v3', 'adafruit213inv3'):
+        config['ui']['display']['type'] = 'adafruit2in13_v3'
+
+    # Waveshare
+
     elif config['ui']['display']['type'] in ('waveshare1in02', 'ws1in02', 'ws102', 'waveshare_102', 'waveshare_1in02'):
         config['ui']['display']['type'] = 'waveshare1in02'
 
@@ -304,16 +314,16 @@ def load_config(args):
     elif config['ui']['display']['type'] in ('waveshare1in64g', 'ws1in64g', 'ws164g', 'waveshare_164g', 'waveshare_1in64g'):
         config['ui']['display']['type'] = 'waveshare1in64g'
 
-    elif config['ui']['display']['type'] in ('ws_1', 'ws1', 'waveshare_1', 'waveshare1'):
+    elif config['ui']['display']['type'] in ('ws_1', 'ws1', 'waveshare_1', 'waveshare1', 'waveshare2in13'):
         config['ui']['display']['type'] = 'waveshare_1'
 
-    elif config['ui']['display']['type'] in ('ws_2', 'ws2', 'waveshare_2', 'waveshare2'):
+    elif config['ui']['display']['type'] in ('ws_2', 'ws2', 'waveshare_2', 'waveshare2', 'waveshare2in13v2'):
         config['ui']['display']['type'] = 'waveshare_2'
 
-    elif config['ui']['display']['type'] in ('ws_3', 'ws3', 'waveshare_3', 'waveshare3'):
+    elif config['ui']['display']['type'] in ('ws_3', 'ws3', 'waveshare_3', 'waveshare3', 'waveshare2in13v3'):
         config['ui']['display']['type'] = 'waveshare_3'
 
-    elif config['ui']['display']['type'] in ('ws_4', 'ws4', 'waveshare_4', 'waveshare4'):
+    elif config['ui']['display']['type'] in ('ws_4', 'ws4', 'waveshare_4', 'waveshare4', 'waveshare2in13v4'):
         config['ui']['display']['type'] = 'waveshare_4'
 
     elif config['ui']['display']['type'] in ('waveshare2in13b_v3', 'waveshare2in13b_v3', 'ws213bv3', 'waveshare_213bv3', 'waveshare213inb_v3'):
@@ -453,8 +463,8 @@ def load_config(args):
         config['ui']['display']['type'] = 'weact2in9'
 
     else:
-        print("unsupported display type %s" % config['ui']['display']['type'])
+        logging.debug("using dummy display, as your display type is unsupported")
-        sys.exit(1)
+        config['ui']['display']['type'] = 'dummydisplay'
 
     return config
 

pyproject.toml

@@ -9,11 +9,13 @@ dependencies = [
     "Pillow",
     "PyYAML",
     "RPi.GPIO",
+    "dbus-python",
     "file-read-backwards",
     "flask",
     "flask-cors",
     "flask-wtf",
     "gast",
+    "gpiozero",
     "gym",
     "inky",
     "pycryptodome",
@@ -30,7 +32,7 @@ dependencies = [
     "torch",
     "torchvision",
     "tweepy",
-    "websockets"
+    "websockets",
 ]
 requires-python = ">=3.9"
 authors = [

setup.py

@@ -16,7 +16,10 @@ log = logging.getLogger(__name__)
 def install_file(source_filename, dest_filename):
     # do not overwrite network configuration if it exists already
     # https://github.com/evilsocket/pwnagotchi/issues/483
-    if dest_filename.startswith('/etc/network/interfaces.d/') and dest_filename.startswith('/root/') and os.path.exists(dest_filename):
+    if dest_filename.startswith('/etc/network/interfaces.d/') and os.path.exists(dest_filename):
+        log.info(f"{dest_filename} exists, skipping ...")
+        return
+    elif dest_filename.startswith('/root/') and os.path.exists(dest_filename):
         log.info(f"{dest_filename} exists, skipping ...")
         return
 
@@ -31,6 +34,11 @@ def install_file(source_filename, dest_filename):
 
 
 def install_system_files():
+    f = open("apt_packages.txt", "r")
+
+    for x in f:
+        os.system(f"apt-get install -y {x}")
+    f.close()
     setup_path = os.path.dirname(__file__)
     if platform.machine().startswith('arm'):
         data_path = os.path.join(setup_path, "builder/data/32bit")