Merge remote-tracking branch 'origin/master'

Signed-off-by: jayofelony <oudshoorn.jeroen@gmail.com>

.github/FUNDING.yml

@@ -1,4 +1,3 @@
 # These are supported funding model platforms
 
-patreon: pwnagotchi_torch
 github: jayofelony

.github/workflows/publish.yml

@@ -8,205 +8,65 @@ on:
         required: true
 
 jobs:
- 
+  build:
-  publish:
     runs-on: ubuntu-latest
+
     steps:
+      - uses: actions/checkout@v4
 
-    - name: Remove unnecessary directories
+      - name: Extract version from file
+        id: get_version
         run: |
-        sudo rm -rf /usr/share/dotnet
+          VERSION=$(cut -d "'" -f2 < pwnagotchi/_version.py)
-        sudo rm -rf /opt/ghc
+          echo "VERSION=$VERSION" >> $GITHUB_ENV
-        sudo rm -rf /usr/local/share/boost
-        sudo rm -rf "$AGENT_TOOLSDIRECTORY"
 
-    - name: Check disk space
+      - name: Get latest tag
-      run: df -BG
+        uses: actions-ecosystem/action-get-latest-tag@v1
+        id: get-latest-tag
 
-    - name: Checkout code
+      - name: Set LAST_VERSION as an environment variable
-      uses: actions/checkout@v4
+        run: echo "LAST_VERSION=${{ steps.get-latest-tag.outputs.tag }}" >> $GITHUB_ENV
 
-    - name: Validate tag
+      - name: Generate release notes
-      id: tag-setter
+        id: generate_release_notes
         run: |
-            TAG=${{ github.event.inputs.version }}
+          COMMITS=$(git log --merges --pretty=format:"* %s" $LAST_VERSION--$VERSION | sed 's/$/\\n/g')
-            if [[ $TAG =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
+          CONTRIBUTORS=$(git shortlog -sn $LAST_VERSION--$VERSION | awk '{print "* @" $2}' | sed 's/$/\\n/g')
-            echo "Tag $TAG is valid."
+          RELEASE_BODY="**Full Changelog**: https://github.com/jayofelony/pwnagotchi/compare/$LAST_VERSION...$VERSION"
-            echo "TAG=$TAG" >> $GITHUB_OUTPUT
+          echo "RELEASE_BODY=$RELEASE_BODY" >> $GITHUB_ENV
-            else
-            echo "Tag $TAG is not a valid semantic version. Aborting."
-            exit 1
-            fi
 
-    - name: Set up Python
+      - name: Install qemu dependencies
-      uses: actions/setup-python@v5
+        run: sudo apt update && sudo apt install qemu-user-static qemu-utils xz-utils -y
-      with:
-        python-version: 3.9
 
-    - name: Install dependencies
+      - name: Build img file
-      run: | 
+        run: ls -la .; pwd; make all
-           sudo apt-get update && sudo apt-get install -y libdbus-1-dev curl unzip gettext qemu-utils qemu qemu-user-static binfmt-support
-           pip install -r requirements.txt
 
-    - name: Update QEMU
+      - name: Transfer 32bit.img to docker and give permissions
-      run: |
+        run: sudo chown runner:docker "pwnagotchi-32bit.img"
-            sudo update-binfmts --enable qemu-aarch64
-            echo $(ls /usr/bin/qemu-aarch64-static)
 
-    - name: Restart binfmt-support
+      - name: Transfer 64bit.img to docker and give permissions
-      run: sudo service binfmt-support restart
+        run: sudo chown runner:docker "pwnagotchi-64bit.img"
-
-    - name: Mount binfmt_misc
-      run: |
-        if ! grep -qs '/proc/sys/fs/binfmt_misc ' /proc/mounts; then
-          echo "Mounting binfmt_misc"
-          sudo mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc
-        fi
-
-    - name: Restart binfmt-support
-      run: sudo service binfmt-support restart
-        
-    - name: Update Languages
-      run: make update_langs
-    
-    - name: Compile Languages
-      run: make compile_langs
-
-    - name: Check disk space
-      run: df -BG
-
-    - name: Check qemu-user-static package
-      run: |
-        echo "Checking qemu-user-static package..."
-        dpkg -s qemu-user-static && echo "qemu-user-static is installed." || echo "qemu-user-static is NOT installed."
-    
-    - name: Check binfmt-support service
-      run: |
-        echo "Checking binfmt-support service..."
-        service binfmt-support status && echo "binfmt-support service is running." || echo "binfmt-support service is NOT running."
-    
-    - name: Check binfmt_misc filesystem
-      run: |
-        echo "Checking binfmt_misc filesystem..."
-        mount | grep binfmt_misc && echo "binfmt_misc is mounted." || echo "binfmt_misc is NOT mounted."
-        echo $(ls /proc/sys/fs/binfmt_misc | grep qemu-aarch64)
-
-    - name: Run Makefile
-      run: make
-      env: 
-        PWN_VERSION: ${{ steps.tag-setter.outputs.TAG }}
 
       - name: PiShrink
         run: |
           wget https://raw.githubusercontent.com/Drewsif/PiShrink/master/pishrink.sh
           chmod +x pishrink.sh
           sudo mv pishrink.sh /usr/local/bin
-        find /home/runner/work/ -type f -name "*.img" -exec sudo pishrink.sh {} \;
+          find /home/runner/work/ -type f -name "*.img" -exec sudo pishrink.sh -aZ {} \;
 
-    - name: Compress .img files
+      - name: Change name of 32.img.xz to add version
-      run: |
+        run: mv "pwnagotchi-32bit.img.xz" "pwnagotchi-$VERSION-32bit.img.xz"
-         find /home/runner/work/ -type f -name "*.img" -exec xz --no-warn {} \;
 
-    - name: Create tag
+      - name: Change name of 64.img.xz to add version
-      uses: actions/github-script@v7
+        run: mv "pwnagotchi-64bit.img.xz" "pwnagotchi-$VERSION-64bit.img.xz"
+
+      - name: Release
+        uses: softprops/action-gh-release@v1
         with:
-        script: |
+          prerelease: true
-            const version = "${{ steps.tag-setter.outputs.TAG }}"
+          tag_name: v${{ env.VERSION }}
-            console.log(`Creating tag ${version}`)
+          name: Pwnagotchi v${{ env.VERSION }}
-            await github.rest.git.createRef({
+          files: |
-              owner: context.repo.owner,
+              pwnagotchi-${{ env.VERSION }}-32bit.img.xz
-              repo: context.repo.repo,
+              pwnagotchi-${{ env.VERSION }}-64bit.img.xz
-              ref: `refs/tags/${version}`,
+          body: ${{ env.RELEASE_BODY }}
-              sha: context.sha
-            })
-
-    - name: Create Release
-      id: create_release
-      uses: actions/github-script@v7
-      with:
-        script: |
-          const tag = "${{ steps.tag-setter.outputs.TAG }}"
-          console.log(`Creating release with tag: ${tag}`)
-          const release = await github.rest.repos.createRelease({
-            owner: context.repo.owner,
-            repo: context.repo.repo,
-            tag_name: tag,
-            name: tag,
-            draft: false,
-            prerelease: true,
-            generate_release_notes: true
-          })
-          console.log(`Created release with id: ${release.data.id}`)
-          return release.data.id
-
-    - name: Upload Release Asset
-      id: upload-release-asset 
-      uses: actions/github-script@v7
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      with:
-        script: |
-          const fs = require('fs');
-          const path = require('path');
-          const release_id = "${{ steps.create_release.outputs.result }}";
-          const asset_content_type = 'application/octet-stream';
-          const distDir = '/home/runner/work/';
-          
-          const uploadFile = async (filePath) => {
-            if (fs.lstatSync(filePath).isDirectory()) {
-              const files = fs.readdirSync(filePath);
-              for (const file of files) {
-                await uploadFile(path.join(filePath, file));
-              }
-            } else {
-              // Check if the file has a .xz extension
-              if (path.extname(filePath) === '.xz') {
-                console.log(`Uploading ${filePath}...`);
-      
-                const asset_name = path.basename(filePath);
-                const asset_size = fs.statSync(filePath).size;
-                const asset = fs.createReadStream(filePath);
-      
-                const response = await github.rest.repos.uploadReleaseAsset({
-                  owner: context.repo.owner,
-                  repo: context.repo.repo,
-                  release_id: release_id,
-                  name: asset_name,
-                  data: asset,
-                  headers: {
-                    'content-type': asset_content_type,
-                    'content-length': asset_size
-                  }
-                });
-      
-                console.log(`Uploaded ${filePath}: ${response.data.browser_download_url}`);
-              }
-            }
-          }
-      
-          await uploadFile(distDir);
-          
-    - name: Update Release
-      uses: actions/github-script@v7
-      with:
-        script: |
-          const release_id = "${{ steps.create_release.outputs.result }}"
-          console.log(`Updating release with id: ${release_id}`)
-          github.rest.repos.updateRelease({
-            owner: context.repo.owner,
-            repo: context.repo.repo,
-            release_id: release_id,
-            tag_name: "${{ steps.tag-setter.outputs.TAG }}",
-            name: "${{ steps.tag-setter.outputs.TAG }}",
-            draft: false,
-            prerelease: false
-          })
-
-    - name: Save environment variable
-      run: echo "${{ steps.tag-setter.outputs.TAG }}"  > env_var.txt
-
-    - name: Upload artifact
-      uses: actions/upload-artifact@v4
-      with:
-        name: env-var
-        path: env_var.txt

Makefile

@@ -1,4 +1,4 @@
-PACKER_VERSION := 1.10.0
+PACKER_VERSION := 1.10.1
 PWN_HOSTNAME := pwnagotchi
 PWN_VERSION := $(shell cut -d"'" -f2 < pwnagotchi/_version.py)
 
@@ -25,7 +25,8 @@ ifneq (,$(UNSHARE))
 UNSHARE := $(UNSHARE) --uts
 endif
 
-all: clean image clean
+# sudo apt-get install qemu-user-static qemu-utils
+all: clean packer image
 
 update_langs:
 	@for lang in pwnagotchi/locale/*/; do\
@@ -39,30 +40,21 @@ compile_langs:
 		./scripts/language.sh compile $$(basename $$lang); \
 	done
 
-PACKER := ~/pwnagotchi/packer
+packer: clean
-PACKER_URL := https://releases.hashicorp.com/packer/$(PACKER_VERSION)/packer_$(PACKER_VERSION)_linux_$(GOARCH).zip
+	curl https://releases.hashicorp.com/packer/$(PACKER_VERSION)/packer_$(PACKER_VERSION)_linux_amd64.zip -o /tmp/packer.zip
-$(PACKER):
+	unzip /tmp/packer.zip -d /tmp
-	mkdir -p $(@D)
+	sudo mv /tmp/packer /usr/bin/packer
-	curl -L "$(PACKER_URL)" -o $(PACKER).zip
-	unzip $(PACKER).zip -d $(@D)
-	rm $(PACKER).zip
-	chmod +x $@
 
-SDIST := dist/pwnagotchi-$(PWN_VERSION).tar.gz
+image: clean packer
-$(SDIST): setup.py pwnagotchi
+	cd builder && sudo /usr/bin/packer init combined.json.pkr.hcl && sudo $(UNSHARE) /usr/bin/packer build -var "pwn_hostname=$(PWN_HOSTNAME)" -var "pwn_version=$(PWN_VERSION)" combined.json.pkr.hcl
-	python3 setup.py sdist
 
-# Building the image requires packer, but don't rebuild the image just because packer updated.
+bullseye: clean packer
-pwnagotchi: | $(PACKER)
+	cd builder && sudo /usr/bin/packer init data/32bit/raspberrypi32.json.pkr.hcl && sudo $(UNSHARE) /usr/bin/packer build -var "pwn_hostname=$(PWN_HOSTNAME)" -var "pwn_version=$(PWN_VERSION)" data/32bit/raspberrypi32.json.pkr.hcl
+	sudo pishrink -vaZ pwnagotchi-32bit.img
 
-# If the packer or ansible files are updated, rebuild the image.
+bookworm: clean packer
-pwnagotchi: $(SDIST) builder/pwnagotchi.json.pkr.hcl builder/raspberrypi64.yml $(shell find builder/data -type f)
+	cd builder && sudo /usr/bin/packer init data/64bit/raspberrypi64.json.pkr.hcl && sudo $(UNSHARE) /usr/bin/packer build -var "pwn_hostname=$(PWN_HOSTNAME)" -var "pwn_version=$(PWN_VERSION)" data/64bit/raspberrypi64.json.pkr.hcl
-
+	sudo pishrink -vaZ pwnagotchi-64bit.img
-	cd builder && $(PACKER) init pwnagotchi.json.pkr.hcl && sudo $(UNSHARE) $(PACKER) build -var "pwn_hostname=$(PWN_HOSTNAME)" -var "pwn_version=$(PWN_VERSION)" pwnagotchi.json.pkr.hcl
-
-.PHONY: image
-image: pwnagotchi
 
 clean:
-	- rm -rf dist pwnagotchi.egg-info
+	- rm -rf /tmp/packer*
-	- rm -f $(PACKER)

README-google.md

@@ -11,7 +11,7 @@ Select ‘Credentials’ from the left menu, click ‘Create Credentials’, sel
 
 Now, the product name and consent screen need to be set -> click ‘Configure consent screen’ and follow the instructions. Once finished:
 
-Select ‘Application type’ to be Web application.
+Select ‘Application type’ to be Desktop application.
 
 Enter an appropriate name.
 
@@ -19,7 +19,7 @@ Input http://localhost/ for ‘Authorized redirect URIs’.
 
 Select the correct oauth scope:
 
-    - drive.file
+    - drive
     - drive.install
 
 Click ‘Create’.

README.md

@@ -1,30 +1,7 @@
-# Pwnagotchi-Torch
+# Pwnagotchi
-<a href="https://github.com/jayofelony/pwnagotchi-bookworm/releases/latest"><img alt="Release" src="https://img.shields.io/github/release/jayofelony/pwnagotchi-bookworm.svg"></a><br/>
+This is the main source for all forks:
-**This fork of [Pwnagotchi](https://www.pwnagotchi.ai) is only for 64-bit Raspberry Pi's. Such as the 02W, 3(b+) and 4(b) and the new Raspberry Pi 5!!.**
+- RPiZeroW (32bit)
-
+- RPiZero2W, RPi3, RPi4, RPi5 (64bit)
-The RPi5 can only be used headless currently. (without display.)
-
-
-If you are using an older 32-bit version Raspberry Pi, ZeroWH, use this [fork](https://github.com/jayofelony/pwnagotchi-torch/releases/tag/v2.6.4) and make sure you download the `armhf` version.
-
----
-Download the latest image file [here](https://github.com/jayofelony/pwnagotchi-bookworm/releases/tag/v2.7.9), and let it auto-update from here on out.
-
-**Use RPi imager to flash, please don't flash a new user as this will mess with logs created.**
-  - Select `Use Custom Image`
-  - Browse for the downloaded image file
-  - Select No under `Use OS Customization`
-
-SSH credentials are `pi/raspberry`.
-
-# Donations: 
-I would like to thank 
-- [findingmoist](https://github.com/findingmoist) 
-- [kr4k0n](https://github.com/kr4k0n)
-
-for donating!
-
-[Pwnagotchi-Torch](https://www.patreon.com/pwnagotchi_torch)
 
 [GH Sponsor](https://github.com/sponsors/jayofelony)
 

bin/pwnagotchi

@@ -7,6 +7,7 @@ import sys
 import toml
 import requests
 import os
+import re
 
 import pwnagotchi
 from pwnagotchi import utils
@@ -18,12 +19,12 @@ from pwnagotchi import fs
 from pwnagotchi.utils import DottedTomlEncoder, parse_version as version_to_tuple
 
 
-def pwnagotchi_cli():
 def do_clear(display):
     logging.info("clearing the display ...")
     display.clear()
     sys.exit(0)
 
+
 def do_manual_mode(agent):
     logging.info("entering manual mode ...")
 
@@ -45,12 +46,12 @@ def pwnagotchi_cli():
         if grid.is_connected():
             plugins.on('internet_available', agent)
 
+
 def do_auto_mode(agent):
     logging.info("entering auto mode ...")
 
     agent.mode = 'auto'
     agent.start()
-        config = agent.config()
 
     while True:
         try:
@@ -60,7 +61,6 @@ def pwnagotchi_cli():
             channels = agent.get_access_points_by_channel()
             # for each channel
             for ch, aps in channels:
-                    time.sleep(0.2)  # This is to make sure it doesn't error (https://github.com/seemoo-lab/nexmon/issues/596)
                 agent.set_channel(ch)
 
                 if not agent.is_stale() and agent.any_activity():
@@ -68,9 +68,6 @@ def pwnagotchi_cli():
 
                 # for each ap on this channel
                 for ap in aps:
-                        if ap['mac'][:13].lower in config['main']['whitelist'] or ap['hostname'] in config['main']['whitelist']:
-                            logging.info(f"Found your MAC address {ap['mac']} - {config['main']['whitelist']}")
-                            continue
                     # send an association frame in order to get for a PMKID
                     agent.associate(ap)
                     # deauth all client stations in order to get a full handshake
@@ -92,15 +89,15 @@ def pwnagotchi_cli():
 
         except Exception as e:
             if str(e).find("wifi.interface not set") > 0:
-                    logging.exception(
+                logging.exception("main loop exception due to unavailable wifi device, likely programmatically disabled (%s)", e)
-                        "main loop exception due to unavailable wifi device, likely programmatically disabled (%s)", e)
+                logging.info("sleeping 60 seconds then advancing to next epoch to allow for cleanup code to trigger")
-                    logging.info(
-                        "sleeping 60 seconds then advancing to next epoch to allow for cleanup code to trigger")
                 time.sleep(60)
                 agent.next_epoch()
             else:
                 logging.exception("main loop exception (%s)", e)
 
+
+if __name__ == '__main__':
     def add_parsers(parser):
         """
         Adds the plugins and google subcommands
@@ -137,6 +134,8 @@ def pwnagotchi_cli():
                         help="Print the configuration.")
 
     # Jayofelony added these
+    parser.add_argument('--wizard', dest="wizard", action="store_true", default=False,
+                        help="Interactive installation of your personal configuration.")
     parser.add_argument('--check-update', dest="check_update", action="store_true", default=False,
                         help="Check for updates on Pwnagotchi. And tells current version.")
     parser.add_argument('--donate', dest="donate", action="store_true", default=False,
@@ -161,30 +160,128 @@ def pwnagotchi_cli():
         print(pwnagotchi.__version__)
         sys.exit(0)
 
+    if args.wizard:
+        def is_valid_hostname(hostname):
+            if len(hostname) > 255:
+                return False
+            if hostname[-1] == ".":
+                hostname = hostname[:-1]  # strip exactly one dot from the right, if present
+            allowed = re.compile("(?!-)[A-Z\d-]{1,63}(?<!-)$", re.IGNORECASE)
+            return all(allowed.match(x) for x in hostname.split("."))
+
+        pwn_restore = input("Do you want to restore the previous configuration? [Y/N]\n")
+        if pwn_restore in ('y', 'yes'):
+            os.system("cp -f /etc/pwnagotchi/config.toml.bak /etc/pwnagotchi/config.toml")
+            print("Your previous configuration is restored, and I will restart in 5 seconds.")
+            time.sleep(5)
+            os.system("service pwnagotchi restart")
+        else:
+            pwn_check = input("This will create a new configuration file and overwrite your current backup, are you sure? [Y/N]\n")
+            if pwn_check.lower() in ('y', 'yes'):
+                os.system("mv -f /etc/pwnagotchi/config.toml /etc/pwnagotchi/config.toml.bak")
+                with open("/etc/pwnagotchi/config.toml", "a+") as f:
+                    f.write("# Do not edit this file if you do not know what you are doing!!!\n\n")
+                    # Set pwnagotchi name
+                    print("Welcome to the interactive installation of your personal Pwnagotchi configuration!\n"
+                          "My name is Jayofelony, how may I call you?\n")
+                    pwn_name = input("Pwnagotchi name (no spaces): ")
+                    if pwn_name == "":
+                        pwn_name = "Pwnagotchi"
+                        print("I shall go by Pwnagotchi from now on!")
+                        pwn_name = f"main.name = \"{pwn_name}\"\n"
+                        f.write(pwn_name)
+                    else:
+                        if is_valid_hostname(pwn_name):
+                            print(f"I shall go by {pwn_name} from now on!")
+                            pwn_name = f"main.name = \"{pwn_name}\"\n"
+                            f.write(pwn_name)
+                        else:
+                            print("You have chosen an invalid name. Please start over.")
+                            exit()
+                    pwn_whitelist = input("How many networks do you want to whitelist? "
+                                          "We will also ask a MAC for each network?\n"
+                                          "Each SSID and BSSID count as 1 network. \n\n"
+                                          "Be sure to use digits as your answer.\n\n"
+                                          "Amount of networks: ")
+                    if int(pwn_whitelist) > 0:
+                        f.write("main.whitelist = [\n")
+                        for x in range(int(pwn_whitelist)):
+                            ssid = input("SSID (Name): ")
+                            bssid = input("BSSID (MAC): ")
+                            f.write(f"\t\"{ssid}\",\n")
+                            f.write(f"\t\"{bssid}\",\n")
+                        f.write("]\n")
+                    # set bluetooth tether
+                    pwn_bluetooth = input("Do you want to enable BT-Tether? [Y/N] ")
+                    if pwn_bluetooth.lower() in ('y', 'yes'):
+                        f.write("main.plugins.bt-tether.enabled = true\n\n")
+                        pwn_bluetooth_device = input("What device do you use? Android or iOS? ")
+                        if pwn_bluetooth_device.lower() == "android":
+                            f.write("main.plugins.bt-tether.devices.android-phone.enabled = true\n")
+                            pwn_bluetooth_mac = input("What is the bluetooth MAC of your device? ")
+                            if pwn_bluetooth_mac != "":
+                                f.write(f"main.plugins.bt-tether.devices.android-phone.mac = \"{pwn_bluetooth_mac}\"\n")
+                        elif pwn_bluetooth_device.lower() == "ios":
+                            f.write("main.plugins.bt-tether.devices.ios-phone.enabled = true\n")
+                            pwn_bluetooth_mac = input("What is the bluetooth MAC of your device? ")
+                            if pwn_bluetooth_mac != "":
+                                f.write(f"main.plugins.bt-tether.devices.ios-phone.mac = \"{pwn_bluetooth_mac}\"\n")
+                    # set up display settings
+                    pwn_display_enabled = input("Do you use a display? [Y/N] ")
+                    if pwn_display_enabled.lower() in ('y', 'yes'):
+                        f.write("ui.display.enabled = true\n")
+                        pwn_display_type = input("What display do you use?\n\n"
+                                                 "Be sure to check for the correct display type @ \n"
+                                                 "https://github.com/jayofelony/pwnagotchi/blob/master/pwnagotchi/utils.py#L240-L431\n")
+                        if pwn_display_type != "":
+                            f.write(f"ui.display.type = \"{pwn_display_type}\"\n")
+                        pwn_display_invert = input("Do you want to invert the display colors? [Y/N]\n\n"
+                                                   "N = Black background\n"
+                                                   "Y = White background\n")
+                        if pwn_display_invert.lower() in ('y', 'yes'):
+                            f.write("ui.invert = true\n")
+                    f.close()
+                    if pwn_bluetooth.lower() in ('y', 'yes'):
+                        if pwn_bluetooth_device.lower == "android":
+                            print("To visit the webui when connected with your phone, visit: http://192.168.44.44:8080\n"
+                                  "Your configuration is done, and I will restart in 5 seconds.")
+                        elif pwn_bluetooth_device.lower == "ios":
+                            print("To visit the webui when connected with your phone, visit: http://172.20.10.6:8080\n"
+                                  "Your configuration is done, and I will restart in 5 seconds.")
+                    else:
+                        print("Your configuration is done, and I will restart in 5 seconds.")
+                    time.sleep(5)
+                    os.system("service pwnagotchi restart")
+            else:
+                print("Ok, doing nothing.")
+        sys.exit(0)
+
     if args.donate:
-        print("Donations can made @ https://github.com/sponsors/jayofelony \n\nBut only if you really want to!")
+        print("Donations can made @ \n "
+              "https://www.patreon.com/pwnagotchi_torch \n "
+              "https://github.com/sponsors/jayofelony \n\n"
+              "But only if you really want to!")
         sys.exit(0)
 
     if args.check_update:
-        resp = requests.get("https://api.github.com/repos/jayofelony/pwnagotchi-bookworm/releases/latest")
+        resp = requests.get("https://api.github.com/repos/jayofelony/pwnagotchi/releases/latest")
         latest = resp.json()
         latest_ver = latest['tag_name'].replace('v', '')
 
         local = version_to_tuple(pwnagotchi.__version__)
         remote = version_to_tuple(latest_ver)
         if remote > local:
-            user_input = input("There is a new version available! Update from v%s to v%s?\n[y(es)/n(o)]"
+            user_input = input("There is a new version available! Update from v%s to v%s?\n[Y/N] "
                                % (pwnagotchi.__version__, latest_ver))
             # input validation
             if user_input.lower() in ('y', 'yes'):
                 if os.path.exists('/root/.auto-update'):
                     os.system("rm /root/.auto-update && systemctl restart pwnagotchi")
-                os.system("systemctl restart pwnagotchi")
-                print("Okay, give me a couple minutes. Just watch pwnlog while you wait.")
-            elif user_input.lower() in ('n', 'no'):
-                print("Okay, guess not!")
                 else:
-                print("Invalid input.")
+                    logging.error("You should make sure auto-update is enabled!")
+                print("Okay, give me a couple minutes. Just watch pwnlog while you wait.")
+            elif user_input.lower() in ('n', 'no'):  # using this elif for readability
+                print("Okay, guess not!")
         else:
             print("You are currently on the latest release, v%s." % pwnagotchi.__version__)
         sys.exit(0)
@@ -229,7 +326,3 @@ def pwnagotchi_cli():
         do_manual_mode(agent)
     else:
         do_auto_mode(agent)
-
-
-if __name__ == '__main__':
-    pwnagotchi_cli()

builder/combined.json.pkr.hcl

@@ -0,0 +1,173 @@
+packer {
+  required_plugins {
+    arm = {
+      version = "1.0.0"
+      source  = "github.com/cdecoux/builder-arm"
+    }
+    ansible = {
+      source  = "github.com/hashicorp/ansible"
+      version = ">= 1.1.1"
+    }
+  }
+}
+
+variable "pwn_hostname" {
+  type = string
+}
+
+variable "pwn_version" {
+  type = string
+}
+
+source "arm" "rpi64-pwnagotchi" {
+  file_checksum_url             = "https://downloads.raspberrypi.org/raspios_lite_arm64/images/raspios_lite_arm64-2023-12-11/2023-12-11-raspios-bookworm-arm64-lite.img.xz.sha256"
+  file_urls                     = ["https://downloads.raspberrypi.org/raspios_lite_arm64/images/raspios_lite_arm64-2023-12-11/2023-12-11-raspios-bookworm-arm64-lite.img.xz"]
+  file_checksum_type            = "sha256"
+  file_target_extension         = "xz"
+  file_unarchive_cmd            = ["unxz", "$ARCHIVE_PATH"]
+  image_path                    = "../pwnagotchi-64bit.img"
+  qemu_binary_source_path       = "/usr/libexec/qemu-binfmt/aarch64-binfmt-P"
+  qemu_binary_destination_path  = "/usr/libexec/qemu-binfmt/aarch64-binfmt-P"
+  image_build_method            = "resize"
+  image_size                    = "9G"
+  image_type                    = "dos"
+  image_partitions {
+    name         = "boot"
+    type         = "c"
+    start_sector = "8192"
+    filesystem   = "fat"
+    size         = "256M"
+    mountpoint   = "/boot/firmware"
+  }
+  image_partitions {
+    name         = "root"
+    type         = "83"
+    start_sector = "532480"
+    filesystem   = "ext4"
+    size         = "0"
+    mountpoint   = "/"
+  }
+}
+
+source "arm" "rpi32-pwnagotchi" {
+  file_checksum_url             = "https://downloads.raspberrypi.com/raspios_oldstable_lite_armhf/images/raspios_oldstable_lite_armhf-2023-12-06/2023-12-05-raspios-bullseye-armhf-lite.img.xz.sha256"
+  file_urls                     = ["https://downloads.raspberrypi.com/raspios_oldstable_lite_armhf/images/raspios_oldstable_lite_armhf-2023-12-06/2023-12-05-raspios-bullseye-armhf-lite.img.xz"]
+  file_checksum_type            = "sha256"
+  file_target_extension         = "xz"
+  file_unarchive_cmd            = ["unxz", "$ARCHIVE_PATH"]
+  image_path                    = "../pwnagotchi-32bit.img"
+  qemu_binary_source_path       = "/usr/libexec/qemu-binfmt/arm-binfmt-P"
+  qemu_binary_destination_path  = "/usr/libexec/qemu-binfmt/arm-binfmt-P"
+  image_build_method            = "resize"
+  image_size                    = "9G"
+  image_type                    = "dos"
+  image_partitions {
+    name         = "boot"
+    type         = "c"
+    start_sector = "8192"
+    filesystem   = "fat"
+    size         = "256M"
+    mountpoint   = "/boot"
+  }
+  image_partitions {
+    name         = "root"
+    type         = "83"
+    start_sector = "532480"
+    filesystem   = "ext4"
+    size         = "0"
+    mountpoint   = "/"
+  }
+}
+
+# a build block invokes sources and runs provisioning steps on them. The
+# documentation for build blocks can be found here:
+# https://www.packer.io/docs/from-1.5/blocks/build
+build {
+  name = "Raspberry Pi 64 Pwnagotchi"
+  sources = ["source.arm.rpi64-pwnagotchi"]
+
+  provisioner "file" {
+    destination = "/usr/bin/"
+    sources     = [
+      "data/64bit/usr/bin/bettercap-launcher",
+      "data/64bit/usr/bin/hdmioff",
+      "data/64bit/usr/bin/hdmion",
+      "data/64bit/usr/bin/monstart",
+      "data/64bit/usr/bin/monstop",
+      "data/64bit/usr/bin/pwnagotchi-launcher",
+      "data/64bit/usr/bin/pwnlib",
+    ]
+  }
+  provisioner "shell" {
+    inline = ["chmod +x /usr/bin/*"]
+  }
+
+  provisioner "file" {
+    destination = "/etc/systemd/system/"
+    sources     = [
+      "data/64bit/etc/systemd/system/bettercap.service",
+      "data/64bit/etc/systemd/system/pwnagotchi.service",
+      "data/64bit/etc/systemd/system/pwngrid-peer.service",
+    ]
+  }
+  provisioner "file" {
+    destination = "/etc/update-motd.d/01-motd"
+    source      = "data/64bit/etc/update-motd.d/01-motd"
+  }
+  provisioner "shell" {
+    inline = ["chmod +x /etc/update-motd.d/*"]
+  }
+  provisioner "shell" {
+    inline = ["apt-get -y --allow-releaseinfo-change update", "apt-get -y dist-upgrade", "apt-get install -y --no-install-recommends ansible"]
+  }
+  provisioner "ansible-local" {
+    command         = "ANSIBLE_FORCE_COLOR=1 PYTHONUNBUFFERED=1 PWN_VERSION=${var.pwn_version} PWN_HOSTNAME=${var.pwn_hostname} ansible-playbook"
+    extra_arguments = ["--extra-vars \"ansible_python_interpreter=/usr/bin/python3\""]
+    playbook_file   = "data/64bit/raspberrypi64.yml"
+  }
+}
+
+build {
+  name = "Raspberry Pi 32 Pwnagotchi"
+  sources = ["source.arm.rpi32-pwnagotchi"]
+  provisioner "file" {
+    destination = "/usr/bin/"
+    sources     = [
+      "data/32bit/usr/bin/bettercap-launcher",
+      "data/32bit/usr/bin/hdmioff",
+      "data/32bit/usr/bin/hdmion",
+      "data/32bit/usr/bin/monstart",
+      "data/32bit/usr/bin/monstop",
+      "data/32bit/usr/bin/pwnagotchi-launcher",
+      "data/32bit/usr/bin/pwnlib",
+    ]
+  }
+  provisioner "shell" {
+    inline = ["chmod +x /usr/bin/*"]
+  }
+
+  provisioner "file" {
+    destination = "/etc/systemd/system/"
+    sources     = [
+      "data/32bit/etc/systemd/system/bettercap.service",
+      "data/32bit/etc/systemd/system/pwnagotchi.service",
+      "data/32bit/etc/systemd/system/pwngrid-peer.service",
+    ]
+  }
+  provisioner "file" {
+    destination = "/etc/update-motd.d/01-motd"
+    source      = "data/32bit/etc/update-motd.d/01-motd"
+  }
+  provisioner "shell" {
+    inline = ["chmod +x /etc/update-motd.d/*"]
+  }
+  provisioner "shell" {
+    inline = ["apt-get -y --allow-releaseinfo-change update", "apt-get -y dist-upgrade", "apt-get install -y --no-install-recommends ansible"]
+  }
+  provisioner "ansible-local" {
+    command         = "ANSIBLE_FORCE_COLOR=1 PYTHONUNBUFFERED=1 PWN_VERSION=${var.pwn_version} PWN_HOSTNAME=${var.pwn_hostname} ansible-playbook"
+    extra_arguments = ["--extra-vars \"ansible_python_interpreter=/usr/bin/python3\""]
+    playbook_dir    = "data/32bit/extras/"
+    playbook_file   = "data/32bit/raspberrypi32.yml"
+  }
+}

builder/data/32bit/etc/dhcpcd.conf

@@ -0,0 +1,62 @@
+# A sample configuration for dhcpcd.
+# See dhcpcd.conf(5) for details.
+
+# Allow users of this group to interact with dhcpcd via the control socket.
+#controlgroup wheel
+
+# Inform the DHCP server of our hostname for DDNS.
+hostname
+
+# Use the hardware address of the interface for the Client ID.
+clientid
+# or
+# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
+# Some non-RFC compliant DHCP servers do not reply with this set.
+# In this case, comment out duid and enable clientid above.
+#duid
+
+# Persist interface configuration when dhcpcd exits.
+persistent
+
+# Rapid commit support.
+# Safe to enable by default because it requires the equivalent option set
+# on the server to actually work.
+option rapid_commit
+
+# A list of options to request from the DHCP server.
+option domain_name_servers, domain_name, domain_search, host_name
+option classless_static_routes
+# Respect the network MTU. This is applied to DHCP routes.
+option interface_mtu
+
+# Most distributions have NTP support.
+#option ntp_servers
+
+# A ServerID is required by RFC2131.
+require dhcp_server_identifier
+
+# Generate SLAAC address using the Hardware Address of the interface
+#slaac hwaddr
+# OR generate Stable Private IPv6 Addresses based from the DUID
+slaac private
+
+# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+# !! DO NOT EDIT THESE LINES BELOW PLEASE !!
+# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+# static IP configuration:
+denyinterfaces wlan0
+
+interface eth0
+static domain_name_servers=8.8.8.8 1.1.1.1
+metric 201
+
+interface usb0
+static ip_address=10.0.0.2/24
+static routers=10.0.0.1
+static domain_name_servers=10.0.0.1 8.8.8.8 1.1.1.1
+metric 202
+
+interface bnep0
+static domain_name_servers=8.8.8.8 1.1.1.1
+metric 203

builder/data/32bit/etc/dphys-swapfile

@@ -0,0 +1,26 @@
+# /etc/dphys-swapfile - user settings for dphys-swapfile package
+# author Neil Franklin, last modification 2010.05.05
+# copyright ETH Zuerich Physics Departement
+#   use under either modified/non-advertising BSD or GPL license
+
+# this file is sourced with . so full normal sh syntax applies
+
+# the default settings are added as commented out CONF_*=* lines
+
+
+# where we want the swapfile to be, this is the default
+#CONF_SWAPFILE=/var/swap
+
+# set size to absolute value, leaving empty (default) then uses computed value
+#   you most likely don't want this, unless you have an special disk situation
+CONF_SWAPSIZE=2048
+
+# set size to computed value, this times RAM size, dynamically adapts,
+#   guarantees that there is enough swap without wasting disk space on excess
+#CONF_SWAPFACTOR=2
+
+# restrict size (computed and absolute!) to maximally this limit
+#   can be set to empty for no limit, but beware of filled partitions!
+#   this is/was a (outdated?) 32bit kernel limit (in MBytes), do not overrun it
+#   but is also sensible on 64bit to prevent filling /var or even / partition
+#CONF_MAXSWAP=2048

builder/data/32bit/etc/systemd/system/bluetooth.service

@@ -0,0 +1,20 @@
+[Unit]
+Description=Bluetooth service
+Documentation=man:bluetoothd(8)
+ConditionPathIsDirectory=/sys/class/bluetooth
+
+[Service]
+Type=dbus
+BusName=org.bluez
+ExecStart=/usr/libexec/bluetooth/bluetoothd --noplugin=sap,a2dp
+NotifyAccess=main
+#WatchdogSec=10
+#Restart=on-failure
+CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
+LimitNPROC=1
+ProtectHome=true
+ProtectSystem=full
+
+[Install]
+WantedBy=bluetooth.target
+Alias=dbus-org.bluez.service

builder/data/32bit/etc/systemd/system/bthelper@.service.d/override.conf

@@ -0,0 +1,6 @@
+[Unit]
+After=hciuart.service bluetooth.service
+Before=
+
+[Service]
+ExecStartPre=/bin/sleep 5

builder/data/32bit/etc/systemd/system/pwngrid-peer.service

@@ -8,7 +8,7 @@ After=bettercap.service
 Environment=LD_PRELOAD=/usr/local/lib/libpcap.so.1
 Environment=LD_LIBRARY_PATH=/usr/local/lib
 Type=simple
-ExecStart=/usr/local/bin/pwngrid -keys /etc/pwnagotchi -peers /root/peers -address 127.0.0.1:8666 -client-token /root/.api-enrollment.json -wait -log /home/pi/logs/pwngrid-peer.log -iface wlan0mon
+ExecStart=/usr/local/bin/pwngrid -keys /etc/pwnagotchi -peers /root/peers -address 127.0.0.1:8666 -client-token /root/.api-enrollment.json -wait -log /etc/pwnagotchi/log/pwngrid-peer.log -iface wlan0mon
 Restart=always
 RestartSec=30
 

builder/data/32bit/etc/update-motd.d/01-motd

@@ -0,0 +1,33 @@
+#!/bin/sh
+_hostname=$(hostname)
+_version=$(cut -d"'" -f2 < /usr/local/lib/python3.9/dist-packages/pwnagotchi/_version.py)
+echo
+echo "(◕‿‿◕) $_hostname"
+echo
+echo "    Hi! I'm a pwnagotchi $_version, please take good care of me!"
+echo "    Here are some basic things you need to know to raise me properly!"
+echo
+echo "    If you want to change my configuration, use /etc/pwnagotchi/config.toml"
+echo "    All plugin config files are located in /etc/pwnagotchi/conf.d/"
+echo "    Read the readme if you want to use gdrivesync plugin!!"
+echo
+echo "    All the configuration options can be found on /etc/pwnagotchi/default.toml,"
+echo "    but don't change this file because I will recreate it every time I'm restarted!"
+echo
+echo "    I use oPwnGrid as my main API, you can check stats at https://opwngrid.xyz"
+echo
+echo "    I'm managed by systemd. Here are some basic commands."
+echo
+echo "    If you want to know what I'm doing, you can check my logs with the command"
+echo "    - pwnlog"
+echo "    - sudo pwnagotchi --version, to check the current version"
+echo "    - sudo pwnagotchi --donate, to see how you can donate to this project"
+echo "    - sudo pwnagotchi --check-update, to see if there is a new version available"
+echo
+echo "    If you want to know if I'm running, you can use"
+echo "    sudo systemctl status pwnagotchi"
+echo
+echo "    You can restart me using"
+echo "    pwnkill"
+echo
+echo "    You learn more about me at https://pwnagotchi.ai/"

builder/data/32bit/extras/nexmon.yml

@@ -0,0 +1,40 @@
+# Install nexmon to fix wireless scanning (takes 2.5G of space)
+- name: clone nexmon repository
+  git:
+    repo: https://github.com/DrSchottky/nexmon.git
+    dest: /usr/local/src/nexmon
+
+- name: make firmware
+  shell: "source ./setup_env.sh && make"
+  args:
+    executable: /bin/bash
+    chdir: /usr/local/src/nexmon/
+
+- name: "make firmware patch ({{ item.name }})"
+  shell: "source ./setup_env.sh && cd /usr/local/src/nexmon/patches/{{ item.patch }}/nexmon/ && make"
+  args:
+    executable: /bin/bash
+    chdir: /usr/local/src/nexmon/
+  environment:
+    QEMU_UNAME: "{{ item.kernel }}"
+    ARCHFLAGS: "{{ item.arch_flags }}"
+
+- name: "install new firmware ({{ item.name }})"
+  copy:
+    src: "/usr/local/src/nexmon/patches/{{ item.patch }}/nexmon/{{ item.firmware }}"
+    dest: "/usr/lib/firmware/brcm/{{ item.firmware }}"
+    follow: true
+  environment:
+    QEMU_UNAME: "{{ item.kernel }}"
+    ARCHFLAGS: "{{ item.arch_flags }}"
+
+- name: backup original driver
+  command: "mv /usr/lib/modules/{{ item.kernel }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko.xz /usr/lib/modules/{{ item.kernel }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko.xz.orig"
+
+- name: copy modified driver
+  copy:
+    src: "/usr/local/src/nexmon/patches/driver/brcmfmac_6.1.y-nexmon/brcmfmac.ko"
+    dest: "/usr/lib/modules/{{ item.kernel }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko"
+
+- name : load brcmfmac drivers
+  command: "/sbin/depmod -a {{ item.kernel }}"

builder/data/32bit/raspberrypi32.json.pkr.hcl

@@ -0,0 +1,94 @@
+packer {
+  required_plugins {
+    arm = {
+      version = "1.0.0"
+      source  = "github.com/cdecoux/builder-arm"
+    }
+    ansible = {
+      source  = "github.com/hashicorp/ansible"
+      version = ">= 1.1.1"
+    }
+  }
+}
+
+variable "pwn_hostname" {
+  type = string
+}
+
+variable "pwn_version" {
+  type = string
+}
+
+source "arm" "rpi32-pwnagotchi" {
+  file_checksum_url             = "https://downloads.raspberrypi.com/raspios_oldstable_lite_armhf/images/raspios_oldstable_lite_armhf-2023-12-06/2023-12-05-raspios-bullseye-armhf-lite.img.xz.sha256"
+  file_urls                     = ["https://downloads.raspberrypi.com/raspios_oldstable_lite_armhf/images/raspios_oldstable_lite_armhf-2023-12-06/2023-12-05-raspios-bullseye-armhf-lite.img.xz"]
+  file_checksum_type            = "sha256"
+  file_target_extension         = "xz"
+  file_unarchive_cmd            = ["unxz", "$ARCHIVE_PATH"]
+  image_path                    = "../../pwnagotchi-32bit.img"
+  qemu_binary_source_path       = "/usr/libexec/qemu-binfmt/arm-binfmt-P"
+  qemu_binary_destination_path  = "/usr/libexec/qemu-binfmt/arm-binfmt-P"
+  image_build_method            = "resize"
+  image_size                    = "9G"
+  image_type                    = "dos"
+  image_partitions {
+    name         = "boot"
+    type         = "c"
+    start_sector = "8192"
+    filesystem   = "fat"
+    size         = "256M"
+    mountpoint   = "/boot"
+  }
+  image_partitions {
+    name         = "root"
+    type         = "83"
+    start_sector = "532480"
+    filesystem   = "ext4"
+    size         = "0"
+    mountpoint   = "/"
+  }
+}
+build {
+  name = "Raspberry Pi 32 Pwnagotchi"
+  sources = ["source.arm.rpi32-pwnagotchi"]
+  provisioner "file" {
+    destination = "/usr/bin/"
+    sources     = [
+      "data/32bit/usr/bin/bettercap-launcher",
+      "data/32bit/usr/bin/hdmioff",
+      "data/32bit/usr/bin/hdmion",
+      "data/32bit/usr/bin/monstart",
+      "data/32bit/usr/bin/monstop",
+      "data/32bit/usr/bin/pwnagotchi-launcher",
+      "data/32bit/usr/bin/pwnlib",
+    ]
+  }
+  provisioner "shell" {
+    inline = ["chmod +x /usr/bin/*"]
+  }
+
+  provisioner "file" {
+    destination = "/etc/systemd/system/"
+    sources     = [
+      "data/32bit/etc/systemd/system/bettercap.service",
+      "data/32bit/etc/systemd/system/pwnagotchi.service",
+      "data/32bit/etc/systemd/system/pwngrid-peer.service",
+    ]
+  }
+  provisioner "file" {
+    destination = "/etc/update-motd.d/01-motd"
+    source      = "data/32bit/etc/update-motd.d/01-motd"
+  }
+  provisioner "shell" {
+    inline = ["chmod +x /etc/update-motd.d/*"]
+  }
+  provisioner "shell" {
+    inline = ["apt-get -y --allow-releaseinfo-change update", "apt-get -y dist-upgrade", "apt-get install -y --no-install-recommends ansible"]
+  }
+  provisioner "ansible-local" {
+    command         = "ANSIBLE_FORCE_COLOR=1 PYTHONUNBUFFERED=1 PWN_VERSION=${var.pwn_version} PWN_HOSTNAME=${var.pwn_hostname} ansible-playbook"
+    extra_arguments = ["--extra-vars \"ansible_python_interpreter=/usr/bin/python3\""]
+    playbook_dir    = "data/32bit/extras/"
+    playbook_file   = "data/32bit/raspberrypi32.yml"
+  }
+}

builder/data/32bit/raspberrypi32.yml

@@ -0,0 +1,593 @@
+---
+- hosts:
+    - 127.0.0.1
+  gather_facts: true
+  become: true
+  vars:
+    boards:
+      - {
+        kernel: "6.1.21+",
+        name: "PiZeroW",
+        firmware: "brcmfmac43430-sdio.bin",
+        patch: "bcm43430a1/7_45_41_46",
+        cpu: arm1176,
+        arch_flags: "-arch armv6l"
+        }
+      - {
+        kernel: "6.1.21-v7+",
+        name: "PiZero2W",
+        firmware: "brcmfmac43436-sdio.bin",
+        patch: "bcm43436b0/9_88_4_65",
+        cpu: any, #cortex-a53
+        arch_flags: "-arch armv7l"
+        }
+      - {
+        kernel: "6.1.21-v7l+",
+        name: "Pi4b_32",
+        firmware: "brcmfmac43455-sdio.bin",
+        patch: "bcm43455c0/7_45_206",
+        cpu: any, #cortex-a72
+        arch_flags: "-arch armv7l"
+        }
+    kernel:
+      min: "6.1"
+      full: "6.1.21+"
+      full_2w: "6.1.21-v7+"
+      full_4b: "6.1.21-v7l+"
+      arch: "v6l"
+    pwnagotchi:
+      hostname: "{{ lookup('env', 'PWN_HOSTNAME') | default('pwnagotchi', true) }}"
+      version: "{{ lookup('env', 'PWN_VERSION') | default('pwnagotchi-torch', true) }}"
+      custom_plugin_dir: "/usr/local/share/pwnagotchi/custom-plugins"
+    system:
+      boot_options:
+        - "#### pwnagotchi additions"
+        - "# this pwnagotchi image is 32-bit only no v8+ headers to build nexmon for 64 bit"
+        - "arm_64bit=0"
+        - "# dwc2 for RNDIS. comment out, and remove dwc2 and g_ether from cmdline.txt for X306 usb battery hat"
+        - "dtoverlay=dwc2"
+        - "dtoverlay=spi1-3cs"
+        - "dtparam=i2c1=on"
+        - "dtparam=i2c_arm=on"
+        - "dtparam=spi=on"
+        - "gpu_mem=16"
+        - "#### audio out on pins 18 and 19"
+        - "#dtoverlay=audremap,pins_18_19"
+        - "#### touchscreen on waveshare touch e-paper"
+        - "#dtoverlay=goodix,interrupt=27,reset=22"
+        - "#### for PWM backlighting on pimoroni displayhatmini"
+        - "dtoverlay=pwm-2chan,pin=12,func=4,pin2=13,func2=4"
+      modules:
+        - "i2c-dev"
+    services:
+      enable:
+        - bettercap.service
+        - bluetooth.service
+        - dphys-swapfile.service
+        - fstrim.timer
+        - pwnagotchi.service
+        - pwngrid-peer.service
+      disable:
+        - apt-daily-upgrade.service
+        - apt-daily-upgrade.timer
+        - apt-daily.service
+        - apt-daily.timer
+        - ifup@wlan0.service
+        - triggerhappy.service
+        - wpa_supplicant.service
+    packages:
+      caplets:
+        source: "https://github.com/jayofelony/caplets.git"
+      bettercap:
+        source: "https://github.com/jayofelony/bettercap.git"
+        url: "https://github.com/jayofelony/bettercap/releases/download/2.32.2/bettercap-2.32.2-armhf.zip"
+        ui: "https://github.com/bettercap/ui/releases/download/v1.3.0/ui.zip"
+      opwngrid:
+        source: "https://github.com/jayofelony/pwngrid.git"
+        url: "https://github.com/jayofelony/pwngrid/releases/download/v1.10.7/pwngrid-1.10.7-armhf.zip"
+      torch:
+        wheel: "torch-2.1.0a0+gitunknown-cp39-cp39-linux_armv6l.whl"
+        url: "https://github.com/Sniffleupagus/Torch4Pizero/releases/download/v1.0.0/torch-2.1.0a0+gitunknown-cp39-cp39-linux_armv6l.whl"
+      torchvision:
+        wheel: "torchvision-0.16.0a0-cp39-cp39-linux_armv6l.whl"
+        url: "https://github.com/Sniffleupagus/Torch4Pizero/releases/download/v1.0.0/torchvision-0.16.0a0-cp39-cp39-linux_armv6l.whl"
+      apt:
+        downgrade:
+          - libpcap-dev_1.9.1-4_armhf.deb
+          - libpcap0.8-dbg_1.9.1-4_armhf.deb
+          - libpcap0.8-dev_1.9.1-4_armhf.deb
+          - libpcap0.8_1.9.1-4_armhf.deb
+        hold:
+          - firmware-atheros
+          - firmware-brcm80211
+          - firmware-libertas
+          - firmware-misc-nonfree
+          - firmware-realtek
+          - libpcap-dev
+          - libpcap0.8
+          - libpcap0.8-dev
+          - libpcap0.8-dbg
+        remove:
+          - avahi-daemon
+          - nfs-common
+          - triggerhappy
+          - wpasupplicant
+        install:
+          - autoconf
+          - bc
+          - bison
+          - bluez
+          - build-essential
+          - curl
+          - dkms
+          - dphys-swapfile
+          - espeak-ng
+          - evtest
+          - fbi
+          - flex
+          - fonts-dejavu
+          - fonts-dejavu-core
+          - fonts-dejavu-extra
+          - fonts-freefont-ttf
+          - g++
+          - gawk
+          - gcc-arm-none-eabi
+          - git
+          - libatlas-base-dev
+          - libavcodec58
+          - libavformat58
+          - libblas-dev
+          - libbluetooth-dev
+          - libbz2-dev
+          - libc-ares-dev
+          - libc6-dev
+          - libcpuinfo-dev
+          - libdbus-1-dev
+          - libdbus-glib-1-dev
+          - libeigen3-dev
+          - libelf-dev
+          - libffi-dev
+          - libfl-dev
+          - libfuse-dev
+          - libgdbm-dev
+          - libgl1-mesa-glx
+          - libgmp3-dev
+          - libgstreamer1.0-0
+          - libhdf5-dev
+          - liblapack-dev
+          - libncursesw5-dev
+          - libnetfilter-queue-dev
+          - libopenblas-dev
+          - libopenjp2-7
+          - libopenmpi-dev
+          - libopenmpi3
+          - libpcap-dev
+          - libprotobuf-dev
+          - libraspberrypi-bin
+          - libraspberrypi-dev
+          - libraspberrypi-doc
+          - libraspberrypi0
+          - libsleef-dev
+          - libsqlite3-dev
+          - libssl-dev
+          - libswscale5
+          - libtiff5
+          - libtool
+          - libts-bin
+          - libusb-1.0-0-dev
+          - lsof
+          - make
+          - python3-flask
+          - python3-flask-cors
+          - python3-flaskext.wtf
+          - python3-pil
+          - python3-pip
+          - python3-protobuf
+          - python3-smbus
+          - qpdf
+          - raspberrypi-kernel-headers
+          - rsync
+          - screen
+          - tcpdump
+          - texinfo
+          - time
+          - tk-dev
+          - unzip
+          - vim
+          - wget
+          - wl
+          - xxd
+          - zlib1g-dev
+
+  tasks:
+    - name: Create pi user
+      copy:
+        dest: /boot/userconf
+        content: |
+          pi:$6$3jNr0GA9KIyt4hmM$efeVIopdMQ8DGgEPCWWlbx3mJJNAYci1lEXGdlky0xPyjqwKNbwTL5SrCcpb4144C4IvzWjn7Iv.QjqmU7iyT/
+
+    - name: change hostname
+      lineinfile:
+        dest: /etc/hostname
+        regexp: '^raspberrypi'
+        line: "{{pwnagotchi.hostname}}"
+        state: present
+      when: lookup('file', '/etc/hostname') == "raspberrypi"
+      register: hostname
+
+    - name: add hostname to /etc/hosts
+      lineinfile:
+        dest: /etc/hosts
+        regexp: '^127\.0\.1\.1[ \t]+raspberrypi'
+        line: "127.0.1.1\t{{pwnagotchi.hostname}}"
+        state: present
+      when: hostname.changed
+
+    - name: Create custom plugin directory
+      file:
+        path: '{{ pwnagotchi.custom_plugin_dir }}'
+        state: directory
+
+    - name: update apt package cache
+      apt:
+        update_cache: yes
+
+    - name: install packages
+      apt:
+        name: "{{ packages.apt.install }}"
+        state: present
+
+    - name: update pip3, setuptools, wheel
+      shell: "python3 -m pip install --upgrade pip setuptools wheel"
+      args:
+        executable: /bin/bash
+        chdir: /usr/local/src
+
+    ###########################################
+    #
+    # libpcap v1.9 - build from source
+    #
+    ###########################################
+
+    # check for presence, then it can re-run in later parts if needed
+    # use the "make" built in
+
+    # install libpcap before bettercap and pwngrid, so they use it
+    - name: clone libpcap v1.9 from github
+      git:
+        repo: 'https://github.com/the-tcpdump-group/libpcap.git'
+        dest: /usr/local/src/libpcap
+        version: libpcap-1.9
+
+    - name: build and install libpcap into /usr/local/lib
+      shell: "./configure && make && make install"
+      args:
+        executable: /bin/bash
+        chdir: /usr/local/src/libpcap
+
+    - name: remove libpcap build folder
+      file:
+        state: absent
+        path: /usr/local/src/libpcap
+
+    - name: create symlink /usr/local/lib/libpcap.so.1.9.1
+      file:
+        src: /usr/local/lib/libpcap.so.1.9.1
+        dest: /usr/local/lib/libpcap.so.0.8
+        state: link
+
+    ###############################################################
+    # Install nexmon to fix wireless scanning (takes 2.5G of space)
+    ###############################################################
+
+    # Install nexmon for all boards
+    - name: build and install nexmon as needed
+      include_tasks: nexmon.yml
+      loop: "{{ boards }}"
+
+    # some pizero2w have the pizeroW wifi chip
+    # could this be a link instead of a copy? and force, only if not a link?
+    - name: copy 43430-sdio as 43436s-sdio for the special 43430/1 /2
+      copy:
+        src: /usr/lib/firmware/brcm/brcmfmac43430-sdio.bin
+        dest: /usr/lib/firmware/brcm/brcmfmac43436s-sdio.bin
+        follow: true
+
+    # delete blob files that make nexmon sad
+    - name: Delete the firmware blob files to avoid some nexmon crashing
+      file:
+        state: absent
+        path: '{{ item }}'
+      loop:
+        - /usr/lib/firmware/brcm/brcmfmac43430-sdio.clm_blob
+        - /usr/lib/firmware/brcm/brcmfmac43430-sdio.raspberrypi,model-zero-w.clm_blob
+        - /usr/lib/firmware/brcm/brcmfmac43430b0-sdio.raspberrypi,model-zero-2-w.clm_blob
+        - /usr/lib/firmware/brcm/brcmfmac43436-sdio.raspberrypi,model-zero-2-w.clm_blob
+        - /usr/lib/firmware/brcm/brcmfmac43430-sdio.raspberrypi,3-model-b.clm_blob
+
+    # To shrink the final image, remove the nexmon directory (takes 2.5G of space) post build and installation
+    - name: Delete nexmon content & directory
+      file:
+        state: absent
+        path: /usr/local/src/nexmon/
+
+    - name: clone pwnagotchi repository
+      git:
+        repo: https://github.com/jayofelony/pwnagotchi.git
+        dest: /usr/local/src/pwnagotchi
+      register: pwnagotchigit
+
+    # is this even necessary? Can't we just link from /home/pi/pwnagotchi to /usr/local/{bin,lib,etc}
+    # then just git update in the home dir and encourage hacking?
+    # make owned by pi.pi, and custom plugins.
+    - name: build pwnagotchi wheel
+      command: "python3 setup.py sdist bdist_wheel"
+      args:
+        chdir: /usr/local/src/pwnagotchi
+      when: (pwnagotchigit.changed) or (pip_packages['pwnagotchi'] is undefined) or (pip_packages['pwnagotchi'] != pwnagotchi_version)
+
+    - name: download torch whl
+      get_url:
+        url: "{{ packages.torch.url }}"
+        dest: /usr/local/src/
+
+    - name: download torchvision whl
+      get_url:
+        url: "{{ packages.torchvision.url }}"
+        dest: /usr/local/src/
+
+    - name: install 32-bit pwnagotchi wheel and dependencies with 32-bit torch wheels
+      pip:
+        name:
+          - "{{ lookup('fileglob', '/usr/local/src/pwnagotchi/dist/pwnagotchi*.whl') }}"
+          - "{{ packages.torch.url }}"
+          - "{{ packages.torchvision.url }}"
+        extra_args: "--no-cache-dir"
+      environment:
+        QEMU_CPU: arm1176
+        QEMU_UNAME: "{{ kernel.full }}"
+      when: (pwnagotchigit.changed) or (pip_packages['pwnagotchi'] is undefined) or (pip_packages['pwnagotchi'] != pwnagotchi_version)
+
+    - name: create /usr/local/share/pwnagotchi/ folder
+      file:
+        path: /usr/local/share/pwnagotchi/
+        state: directory
+
+    - name: remove pwnagotchi folder
+      file:
+        state: absent
+        path: /usr/local/src/pwnagotchi
+
+    - name: remove torch whl
+      file:
+        state: absent
+        path: "{{ lookup('fileglob', '/usr/local/src/torch*.whl') }}"
+
+    ##########################################
+    #
+    # pwngrid, bettercap
+    #
+    ##########################################
+
+    - name: Install go-1.21
+      unarchive:
+        src: https://go.dev/dl/go1.21.6.linux-armv6l.tar.gz
+        dest: /usr/local
+        remote_src: yes
+      register: golang
+
+    - name: Update .bashrc for go-1.21
+      blockinfile:
+        dest: /home/pi/.bashrc
+        state: present
+        block: |
+          export GOPATH=$HOME/go
+          export PATH=/usr/local/go/bin:$PATH:$GOPATH/bin
+          alias custom='cd /usr/local/share/pwnagotchi/custom-plugins/'
+          alias config='sudo nano /etc/pwnagotchi/config.toml'
+          alias pwnlog='tail -f -n300 /etc/pwnagotchi/log/pwn*.log | sed --unbuffered "s/,[[:digit:]]\\{3\\}\\]//g" | cut -d " " -f 2-'
+          alias pwnver='python3 -c "import pwnagotchi as p; print(p.__version__)"'
+          alias pwnkill='sudo killall -USR1 pwnagotchi'
+      when: golang.changed
+
+    - name: download pwngrid
+      unarchive:
+        remote_src: yes
+        src: "{{ packages.opwngrid.url }}"
+        dest: /usr/local/bin/
+        mode: 0755
+
+    - name: download and install bettercap
+      unarchive:
+        src: "{{ packages.bettercap.url }}"
+        dest: /usr/local/bin
+        remote_src: yes
+        exclude:
+          - README.md
+          - LICENSE.md
+        mode: 0755
+
+    - name: clone bettercap caplets
+      git:
+        repo: "{{ packages.caplets.source }}"
+        dest: /tmp/caplets
+      register: capletsgit
+
+    - name: install bettercap caplets
+      make:
+        chdir: /tmp/caplets
+        target: install
+      when: capletsgit.changed
+
+    - name: download and install bettercap ui
+      unarchive:
+        src: "{{ packages.bettercap.ui }}"
+        dest: /usr/local/share/bettercap/
+        remote_src: yes
+        mode: 0755
+
+    # to always have the bettercap webui available (because why not?)
+    - name: copy pwnagotchi-manual over pwnagotchi-auto caplet
+      ansible.builtin.copy:
+        src: /usr/local/share/bettercap/caplets/pwnagotchi-manual.cap
+        dest: /usr/local/share/bettercap/caplets/pwnagotchi-auto.cap
+        force: true
+      ignore_errors: true
+
+    - name: create /etc/pwnagotchi folder
+      file:
+        path: /etc/pwnagotchi
+        state: directory
+
+    - name: create log folder
+      file:
+        path: /home/pi/logs
+        state: directory
+
+    - name: check if user configuration exists
+      stat:
+        path: /etc/pwnagotchi/config.toml
+      register: user_config
+
+    - name: create /etc/pwnagotchi/config.toml
+      copy:
+        dest: /etc/pwnagotchi/config.toml
+        content: |
+          # Add your configuration overrides on this file any configuration changes done to default.toml will be lost!
+          # Example:
+          # ui.display.enabled = true
+          # ui.display.type = "waveshare_4"
+      when: not user_config.stat.exists
+
+    - name: Delete motd 10-uname
+      file:
+        state: absent
+        path: /etc/update-motd.d/10-uname
+
+    - name: enable ssh on boot
+      file:
+        path: /boot/ssh
+        state: touch
+
+    - name: adjust /boot/config.txt
+      lineinfile:
+        dest: /boot/config.txt
+        insertafter: EOF
+        line: '{{ item }}'
+      with_items: "{{system.boot_options}}"
+
+    - name: adjust /etc/modules
+      lineinfile:
+        dest: /etc/modules
+        insertafter: EOF
+        line: '{{ item }}'
+      with_items: "{{system.modules}}"
+
+    - name: change root partition
+      replace:
+        dest: /boot/cmdline.txt
+        backup: no
+        regexp: "root=PARTUUID=[a-zA-Z0-9\\-]+"
+        replace: "root=/dev/mmcblk0p2"
+
+    - name: configure /boot/cmdline.txt
+      lineinfile:
+        path: /boot/cmdline.txt
+        backrefs: True
+        state: present
+        backup: no
+        regexp: '(.*)$'
+        line: '\1 modules-load=dwc2,g_ether'
+
+    - name: add firmware packages to hold
+      dpkg_selections:
+        name: "{{ item }}"
+        selection: hold
+      with_items: "{{ packages.apt.hold }}"
+
+    - name: disable unnecessary services
+      systemd:
+        name: "{{ item }}"
+        state: stopped
+        enabled: no
+      with_items: "{{ services.disable }}"
+
+    - name: enable services
+      systemd:
+        name: "{{ item }}"
+        enabled: true
+        state: stopped
+      with_items: "{{ services.enable }}"
+
+    #- name: remove golang build libraries
+    #  file:
+    #    state: absent
+    #    path: /root/go
+
+    #- name: remove golang
+    #  file:
+    #    state: absent
+    #    path: /usr/local/go
+
+    - name: make /root readable, becauase that's where all the files are
+      file:
+        path: /root
+        mode: '755'
+
+    - name: fix permissions on /home/pi
+      file:
+        path: /home/pi
+        owner: pi
+        group: pi
+        recurse: true
+
+    - name: remove unnecessary apt packages
+      apt:
+        name: "{{ packages.apt.remove }}"
+        state: absent
+        purge: yes
+
+    - name: remove dependencies that are no longer required
+      apt:
+        autoremove: yes
+
+    - name: clean apt cache
+      apt:
+        autoclean: true
+
+    - name: remove golang build libraries
+      file:
+        state: absent
+        path: /root/go
+
+    - name: remove pre-collected packages zip
+      file:
+        path: /root/go_pkgs.tgz
+        state: absent
+
+    - name: remove golang
+      file:
+        state: absent
+        path: /usr/local/go
+
+    - name: remove /root/.cache (pip cache)
+      file:
+        state: absent
+        path: /root/.cache
+
+    - name: remove ssh keys
+      file:
+        state: absent
+        path: "{{ item }}"
+      with_fileglob:
+        - "/etc/ssh/ssh_host*_key*"
+
+    - name: regenerate ssh keys
+      shell: "dpkg-reconfigure openssh-server"
+      args:
+        executable: /bin/bash
+
+  handlers:
+    - name: reload systemd services
+      systemd:
+        daemon_reload: yes

builder/data/32bit/usr/bin/bettercap-launcher

@@ -0,0 +1,28 @@
+#!/usr/bin/env bash
+source /usr/bin/pwnlib
+
+# we need to decrypt something
+if is_crypted_mode; then
+  while ! is_decrypted; do
+    echo "Waiting for decryption..."
+    sleep 1
+  done
+fi
+
+# check if wifi driver is bugged
+if ! check_brcm; then
+  if ! reload_brcm; then
+    echo "Could not reload wifi driver. Reboot"
+    reboot
+  fi
+  sleep 10
+fi
+
+# start wlan0mon
+start_monitor_interface
+
+if is_auto_mode_no_delete; then
+  /usr/local/bin/bettercap -no-colors -caplet pwnagotchi-auto -iface wlan0mon
+else
+  /usr/local/bin/bettercap -no-colors -caplet pwnagotchi-manual -iface wlan0mon
+fi

builder/data/32bit/usr/bin/decryption-webserver

@@ -0,0 +1,149 @@
+#!/usr/bin/env python3
+
+from http.server import HTTPServer, BaseHTTPRequestHandler
+from urllib.parse import parse_qsl
+
+
+_HTML_FORM_TEMPLATE = """
+<!DOCTYPE html>
+<html>
+<head>
+  <title>Decryption</title>
+  <style>
+    body {{ text-align: center; padding: 150px; }}
+    h1 {{ font-size: 50px; }}
+    body {{ font: 20px Helvetica, sans-serif; color: #333; }}
+    article {{ display: block; text-align: center; width: 650px; margin: 0 auto;}}
+    input {{
+      padding: 12px 20px;
+      margin: 8px 0;
+      box-sizing: border-box;
+      border: 1px solid #ccc;
+    }}
+    input[type=password] {{
+      width: 75%;
+      font-size: 24px;
+    }}
+    input[type=submit] {{
+      cursor: pointer;
+      width: 75%;
+    }}
+    input[type=submit]:hover {{
+      background-color: #d9d9d9;
+    }}
+  </style>
+</head>
+<body>
+  <article>
+      <h1>Decryption</h1>
+      <p>Some of your files are encrypted.</p>
+      <p>Please provide the decryption password.</p>
+      <div>
+        <form action="/set-password" method="POST">
+          {password_fields}
+          <input type="submit" value="Submit">
+        </form>
+      </div>
+  </article>
+</body>
+</html>
+"""
+
+POST_RESPONSE = """
+<!DOCTYPE html>
+<html>
+<head>
+<meta name="viewport" content="width=device-width, initial-scale=1">
+<style>
+/* Center the loader */
+#loader {
+  position: absolute;
+  left: 50%;
+  top: 50%;
+  z-index: 1;
+  width: 150px;
+  height: 150px;
+  margin: -75px 0 0 -75px;
+  border: 16px solid #f3f3f3;
+  border-radius: 50%;
+  border-top: 16px solid #3498db;
+  width: 120px;
+  height: 120px;
+  -webkit-animation: spin 2s linear infinite;
+  animation: spin 2s linear infinite;
+}
+
+@-webkit-keyframes spin {
+  0% { -webkit-transform: rotate(0deg); }
+  100% { -webkit-transform: rotate(360deg); }
+}
+
+@keyframes spin {
+  0% { transform: rotate(0deg); }
+  100% { transform: rotate(360deg); }
+}
+
+#myDiv {
+  display: none;
+  text-align: center;
+}
+</style>
+<script type="text/javascript">
+
+function checkPwnagotchi() {
+    var target = 'http://' + document.location.hostname + ':8080/';
+    var xhr = new XMLHttpRequest();
+    xhr.open('GET', target);
+    xhr.onreadystatechange = function () {
+        if (xhr.readyState == 4) {
+            if (xhr.status == 200 || xhr.status == 401) {
+                window.location.replace(target);
+            }else{
+                setTimeout(checkPwnagotchi, 1000);
+            }
+        }
+    };
+    xhr.send();
+}
+
+setTimeout(checkPwnagotchi, 1000);
+
+</script>
+</head>
+<body style="margin:0;">
+
+<div id="loader"></div>
+
+</body>
+</html>
+"""
+
+HTML_FORM = None
+
+
+class SimpleHTTPRequestHandler(BaseHTTPRequestHandler):
+
+    def do_GET(self):
+        self.send_response(200)
+        self.end_headers()
+        self.wfile.write(HTML_FORM.encode())
+
+    def do_POST(self):
+        content_length = int(self.headers['Content-Length'])
+        body = self.rfile.read(content_length)
+        for mapping, password in parse_qsl(body.decode('UTF-8')):
+            with open('/tmp/.pwnagotchi-secret-{}'.format(mapping), 'wt') as pwfile:
+                pwfile.write(password)
+        self.send_response(200)
+        self.end_headers()
+        self.wfile.write(POST_RESPONSE.encode())
+
+
+with open('/root/.pwnagotchi-crypted') as crypted_file:
+    mappings = [line.split()[0] for line in crypted_file.readlines()]
+    fields = ''.join(['<label for="{m}">Passphrase for {m}:</label>\n<input type="password" id="{m}" name="{m}" value=""><br>'.format(m=m)
+              for m in mappings])
+    HTML_FORM = _HTML_FORM_TEMPLATE.format(password_fields=fields)
+
+httpd = HTTPServer(('0.0.0.0', 80), SimpleHTTPRequestHandler)
+httpd.serve_forever()

builder/data/32bit/usr/bin/pwnlib

@@ -0,0 +1,184 @@
+#!/usr/bin/env bash
+
+# check if brcm is stuck
+check_brcm() {
+  if [[ "$(journalctl -n10 -k --since -5m | grep -c 'brcmf_cfg80211_nexmon_set_channel.*Set Channel failed')" -ge 5 ]]; then
+    return 1
+  fi
+  return 0
+}
+
+# reload mod
+reload_brcm() {
+  if ! modprobe -r brcmfmac; then
+    return 1
+  fi
+  sleep 1
+  if ! modprobe brcmfmac; then
+    return 1
+  fi
+  sleep 2
+  iw dev wlan0 set power_save off
+  return 0
+}
+
+# starts mon0
+start_monitor_interface() {
+  rfkill unblock all
+  ifconfig wlan0 up
+  iw dev wlan0 set power_save off
+  iw phy "$(iw phy | head -1 | cut -d" " -f2)" interface add wlan0mon type monitor
+  rfkill unblock all
+  ifconfig wlan0 down
+  ifconfig wlan0mon up
+  iw dev wlan0mon set power_save off
+}
+
+# stops mon0
+stop_monitor_interface() {
+  ifconfig wlan0mon down && iw dev wlan0mon del
+  reload_brcm
+  ifconfig wlan0 up
+}
+
+# returns 0 if the specificed network interface is up
+is_interface_up() {
+  if grep -qi 'up' /sys/class/net/"$1"/operstate; then
+    return 0
+  fi
+  return 1
+}
+
+# returns 0 if conditions for AUTO mode are met
+is_auto_mode() {
+  # check override file first
+  if [ -f /root/.pwnagotchi-manual ]; then
+    # remove the override file if found
+    rm -rf /root/.pwnagotchi-manual
+    return 1
+  fi
+
+  # check override file first
+  if [ -f /root/.pwnagotchi-auto ]; then
+    # remove the override file if found
+    rm -rf /root/.pwnagotchi-auto
+    return 0
+  fi
+
+  # if usb0 is up, we're in MANU
+  if is_interface_up usb0; then
+    return 1
+  fi
+
+  # if eth0 is up (for other boards), we're in MANU
+  if is_interface_up eth0; then
+    return 0
+  fi
+
+  # no override, but none of the interfaces is up -> AUTO
+  return 0
+}
+
+# returns 0 if conditions for AUTO mode are met
+is_auto_mode_no_delete() {
+  # check override file first
+  if [ -f /root/.pwnagotchi-manual ]; then
+    return 1
+  fi
+
+  # check override file first
+  if [ -f /root/.pwnagotchi-auto ]; then
+    return 0
+  fi
+
+  # if usb0 is up, we're in MANU
+  if is_interface_up usb0; then
+    return 1
+  fi
+
+  # if eth0 is up (for other boards), we're in MANU
+  if is_interface_up eth0; then
+    return 0
+  fi
+
+  # no override, but none of the interfaces is up -> AUTO
+  return 0
+}
+
+# check if we need to decrypt something
+is_crypted_mode() {
+  if [ -f /root/.pwnagotchi-crypted ]; then
+    return 0
+  fi
+  return 1
+}
+
+# decryption loop
+is_decrypted() {
+  while read -r mapping container mount; do
+    # mapping   = name the device or file will be mapped to
+    # container = the luks encrypted device or file
+    # mount     = the mountpoint
+
+    # fail if not mounted
+    if ! mountpoint -q "$mount" >/dev/null 2>&1; then
+      if [ -f /tmp/.pwnagotchi-secret-"$mapping" ]; then
+        </tmp/.pwnagotchi-secret-"$mapping" read -r SECRET
+        if ! test -b /dev/disk/by-id/dm-uuid-*"$(cryptsetup luksUUID "$container" | tr -d -)"*; then
+          if echo -n "$SECRET" | cryptsetup luksOpen -d- "$container" "$mapping" >/dev/null 2>&1; then
+            echo "Container decrypted!"
+          fi
+        fi
+
+        if mount /dev/mapper/"$mapping" "$mount" >/dev/null 2>&1; then
+            echo "Mounted /dev/mapper/$mapping to $mount"
+            continue
+        fi
+      fi
+
+      if ! ip -4 addr show wlan0 | grep inet >/dev/null 2>&1; then
+        >/dev/null 2>&1 ip addr add 192.168.0.10/24 dev wlan0
+      fi
+
+      if ! pgrep -f decryption-webserver >/dev/null 2>&1; then
+        >/dev/null 2>&1 decryption-webserver &
+      fi
+
+      if ! pgrep wpa_supplicant >/dev/null 2>&1; then
+        >/tmp/wpa_supplicant.conf cat <<EOF
+ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
+update_config=1
+ap_scan=2
+
+network={
+    ssid="DECRYPT-ME"
+    mode=2
+    key_mgmt=WPA-PSK
+    psk="pwnagotchi"
+    frequency=2437
+}
+EOF
+        >/dev/null 2>&1 wpa_supplicant -u -s -O -D nl80211 -i wlan0 -c /tmp/wpa_supplicant.conf &
+      fi
+
+      if ! pgrep dnsmasq >/dev/null 2>&1; then
+        >/dev/null 2>&1 dnsmasq -k -p 53 -h -O "6,192.168.0.10" -A "/#/192.168.0.10" -i wlan0 -K -F 192.168.0.50,192.168.0.60,255.255.255.0,24h &
+      fi
+
+      return 1
+    fi
+  done </root/.pwnagotchi-crypted
+
+  # overwrite passwords
+  python3 -c 'print("A"*4096)' | tee /tmp/.pwnagotchi-secret-* >/dev/null
+  # delete
+  rm /tmp/.pwnagotchi-secret-*
+  sync # flush
+
+  pkill wpa_supplicant
+  pkill dnsmasq
+  pid="$(pgrep -f "decryption-webserver")"
+  [[ -n "$pid" ]] && kill "$pid"
+
+  return 0
+}

builder/data/64bit/etc/bash_completion.d/pwnagotchi_completion.sh

@@ -0,0 +1,36 @@
+_show_complete()
+{
+    local cur opts node_names all_options opt_line
+    all_options="
+pwnagotchi -h --help -C --config -U --user-config --manual --skip-session --clear --debug --version --print-config --wizard --check-update --donate {plugins,google}
+pwnagotchi plugins -h --help {list,install,enable,disable,uninstall,update,upgrade}
+pwnagotchi plugins list -i --installed -h --help
+pwnagotchi plugins install -h --help
+pwnagotchi plugins uninstall -h --help
+pwnagotchi plugins enable -h --help
+pwnagotchi plugins disable -h --help
+pwnagotchi plugins update -h --help
+pwnagotchi plugins upgrade -h --help
+pwnagotchi google -h --help {login,refresh}
+pwnagotchi google login -h --help
+pwnagotchi google refresh -h --help
+"
+    COMPREPLY=()
+    cur="${COMP_WORDS[COMP_CWORD]}"
+    # shellcheck disable=SC2124
+    cmd="${COMP_WORDS[@]:0:${#COMP_WORDS[@]}-1}"
+    opt_line="$(grep -m1 "$cmd" <<<"$all_options")"
+    if [[ ${cur} == -* ]] ; then
+        opts="$(echo "$opt_line" | tr ' ' '\n' | awk '/^ *-/{gsub("[^a-zA-Z0-9-]","",$1);print $1}')"
+        # shellcheck disable=SC2207
+        COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
+        return 0
+    fi
+
+    # shellcheck disable=SC2086
+    opts="$(echo $opt_line | grep -Po '{\K[^}]+' | tr ',' '\n')"
+    # shellcheck disable=SC2207
+    COMPREPLY=( $(compgen -W "${opts}" -- "${cur}") )
+}
+
+complete -F _show_complete pwnagotchi

builder/data/64bit/etc/dphys-swapfile

@@ -0,0 +1,26 @@
+# /etc/dphys-swapfile - user settings for dphys-swapfile package
+# author Neil Franklin, last modification 2010.05.05
+# copyright ETH Zuerich Physics Departement
+#   use under either modified/non-advertising BSD or GPL license
+
+# this file is sourced with . so full normal sh syntax applies
+
+# the default settings are added as commented out CONF_*=* lines
+
+
+# where we want the swapfile to be, this is the default
+#CONF_SWAPFILE=/var/swap
+
+# set size to absolute value, leaving empty (default) then uses computed value
+#   you most likely don't want this, unless you have an special disk situation
+CONF_SWAPSIZE=2048
+
+# set size to computed value, this times RAM size, dynamically adapts,
+#   guarantees that there is enough swap without wasting disk space on excess
+#CONF_SWAPFACTOR=2
+
+# restrict size (computed and absolute!) to maximally this limit
+#   can be set to empty for no limit, but beware of filled partitions!
+#   this is/was a (outdated?) 32bit kernel limit (in MBytes), do not overrun it
+#   but is also sensible on 64bit to prevent filling /var or even / partition
+#CONF_MAXSWAP=2048

builder/data/64bit/etc/systemd/system/bettercap.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=bettercap api.rest service.
+Documentation=https://bettercap.org
+Wants=network.target
+
+[Service]
+Type=simple
+ExecStart=/usr/bin/bettercap-launcher
+Restart=always
+RestartSec=30
+
+[Install]
+WantedBy=multi-user.target

builder/data/64bit/etc/systemd/system/bluetooth.service

@@ -0,0 +1,20 @@
+[Unit]
+Description=Bluetooth service
+Documentation=man:bluetoothd(8)
+ConditionPathIsDirectory=/sys/class/bluetooth
+
+[Service]
+Type=dbus
+BusName=org.bluez
+ExecStart=/usr/libexec/bluetooth/bluetoothd --noplugin=sap,a2dp
+NotifyAccess=main
+#WatchdogSec=10
+#Restart=on-failure
+CapabilityBoundingSet=CAP_NET_ADMIN CAP_NET_BIND_SERVICE
+LimitNPROC=1
+ProtectHome=true
+ProtectSystem=full
+
+[Install]
+WantedBy=bluetooth.target
+Alias=dbus-org.bluez.service

builder/data/64bit/etc/systemd/system/pwnagotchi.service

@@ -0,0 +1,20 @@
+[Unit]
+Description=pwnagotchi Deep Reinforcement Learning instrumenting bettercap for WiFI pwning.
+Documentation=https://pwnagotchi.org
+Wants=network.target
+After=pwngrid-peer.service
+
+[Service]
+Type=simple
+WorkingDirectory=~
+ExecStart=/usr/bin/pwnagotchi-launcher
+ExecStopPost=/usr/bin/bash -c "if egrep -qi  'personality.clear_on_exit[ =]*true' /etc/pwnagotchi/config.toml ; then /usr/local/bin/pwnagotchi --clear; fi"
+Restart=always
+RestartSec=30
+TasksMax=infinity
+LimitNPROC=infinity
+StandardOutput=null
+StandardError=null
+
+[Install]
+WantedBy=multi-user.target

builder/data/64bit/etc/systemd/system/pwngrid-peer.service

@@ -0,0 +1,16 @@
+[Unit]
+Description=pwngrid peer service.
+Documentation=https://pwnagotchi.ai
+Wants=network.target
+After=bettercap.service
+
+[Service]
+Environment=LD_PRELOAD=/usr/local/lib/libpcap.so.1
+Environment=LD_LIBRARY_PATH=/usr/local/lib
+Type=simple
+ExecStart=/usr/local/bin/pwngrid -keys /etc/pwnagotchi -peers /root/peers -address 127.0.0.1:8666 -client-token /root/.api-enrollment.json -wait -log /etc/pwnagotchi/log/pwngrid-peer.log -iface wlan0mon
+Restart=always
+RestartSec=30
+
+[Install]
+WantedBy=multi-user.target

builder/data/64bit/etc/update-motd.d/01-motd

@@ -20,6 +20,7 @@ echo "    I'm managed by systemd. Here are some basic commands."
 echo
 echo "    If you want to know what I'm doing, you can check my logs with the command"
 echo "    - pwnlog"
+echo "    - sudo pwnagotchi --wizard, to help set up a config.toml"
 echo "    - sudo pwnagotchi --version, to check the current version"
 echo "    - sudo pwnagotchi --donate, to see how you can donate to this project"
 echo "    - sudo pwnagotchi --check-update, to see if there is a new version available"

builder/data/64bit/raspberrypi64.json.pkr.hcl

@@ -6,7 +6,7 @@ packer {
     }
     ansible = {
       source  = "github.com/hashicorp/ansible"
-      version = "~> 1"
+      version = ">= 1.1.1"
     }
   }
 }
@@ -25,7 +25,7 @@ source "arm" "rpi64-pwnagotchi" {
   file_checksum_type            = "sha256"
   file_target_extension         = "xz"
   file_unarchive_cmd            = ["unxz", "$ARCHIVE_PATH"]
-  image_path                    = "../../../pwnagotchi-rpi-bookworm-${var.pwn_version}-arm64.img"
+  image_path                    = "../../../pwnagotchi-64bit.img"
   qemu_binary_source_path       = "/usr/libexec/qemu-binfmt/aarch64-binfmt-P"
   qemu_binary_destination_path  = "/usr/libexec/qemu-binfmt/aarch64-binfmt-P"
   image_build_method            = "resize"
@@ -61,34 +61,30 @@ build {
   provisioner "file" {
     destination = "/usr/bin/"
     sources     = [
-      "data/usr/bin/bettercap-launcher",
+      "data/64bit/usr/bin/bettercap-launcher",
-      "data/usr/bin/hdmioff",
+      "data/64bit/usr/bin/hdmioff",
-      "data/usr/bin/hdmion",
+      "data/64bit/usr/bin/hdmion",
-      "data/usr/bin/monstart",
+      "data/64bit/usr/bin/monstart",
-      "data/usr/bin/monstop",
+      "data/64bit/usr/bin/monstop",
-      "data/usr/bin/pwnagotchi-launcher",
+      "data/64bit/usr/bin/pwnagotchi-launcher",
-      "data/usr/bin/pwnlib",
+      "data/64bit/usr/bin/pwnlib",
     ]
   }
   provisioner "shell" {
     inline = ["chmod +x /usr/bin/*"]
   }
 
-  provisioner "shell" {
-    inline = ["dpkg --add-architecture armhf"]
-  }
-
   provisioner "file" {
     destination = "/etc/systemd/system/"
     sources     = [
-      "data/etc/systemd/system/bettercap.service",
+      "data/64bit/etc/systemd/system/bettercap.service",
-      "data/etc/systemd/system/pwnagotchi.service",
+      "data/64bit/etc/systemd/system/pwnagotchi.service",
-      "data/etc/systemd/system/pwngrid-peer.service",
+      "data/64bit/etc/systemd/system/pwngrid-peer.service",
     ]
   }
   provisioner "file" {
     destination = "/etc/update-motd.d/01-motd"
-    source      = "data/etc/update-motd.d/01-motd"
+    source      = "data/64bit/etc/update-motd.d/01-motd"
   }
   provisioner "shell" {
     inline = ["chmod +x /etc/update-motd.d/*"]
@@ -99,6 +95,6 @@ build {
   provisioner "ansible-local" {
     command         = "ANSIBLE_FORCE_COLOR=1 PYTHONUNBUFFERED=1 PWN_VERSION=${var.pwn_version} PWN_HOSTNAME=${var.pwn_hostname} ansible-playbook"
     extra_arguments = ["--extra-vars \"ansible_python_interpreter=/usr/bin/python3\""]
-    playbook_file   = "raspberrypi64.yml"
+    playbook_file   = "data/64bit/raspberrypi64.yml"
   }
 }

builder/data/64bit/raspberrypi64.yml

@@ -10,7 +10,7 @@
       full_pi5: "6.1.0-rpi8-rpi-2712"
     pwnagotchi:
       hostname: "{{ lookup('env', 'PWN_HOSTNAME') | default('pwnagotchi', true) }}"
-      version: "{{ lookup('env', 'PWN_VERSION') | default('pwnagotchi-torch', true) }}"
+      version: "{{ lookup('env', 'PWN_VERSION') | default('pwnagotchi', true) }}"
     system:
       boot_options:
         - "dtoverlay=dwc2"
@@ -27,7 +27,6 @@
         - fstrim.timer
         - pwnagotchi.service
         - pwngrid-peer.service
-        - zramswap.service
       disable:
         - apt-daily-upgrade.service
         - apt-daily-upgrade.timer
@@ -40,7 +39,7 @@
         source: "https://github.com/jayofelony/caplets.git"
       bettercap:
         source: "https://github.com/jayofelony/bettercap.git"
-        url: "https://github.com/jayofelony/bettercap/releases/download/2.32.2/bettercap-2.32.2.zip"
+        url: "https://github.com/jayofelony/bettercap/releases/download/2.32.4/bettercap-2.32.4.zip"
         ui: "https://github.com/bettercap/ui/releases/download/v1.3.0/ui.zip"
       pwngrid:
         source: "https://github.com/jayofelony/pwngrid.git"
@@ -78,6 +77,7 @@
           - build-essential
           - curl
           - dkms
+          - dphys-swapfile
           - fbi
           - firmware-atheros
           - firmware-brcm80211
@@ -102,7 +102,6 @@
           - libbz2-dev
           - libc-ares-dev
           - libc6-dev
-          - libc6:armhf
           - libcap-dev
           - libcurl-ocaml-dev
           - libdbus-1-dev
@@ -117,10 +116,7 @@
           - libgmp3-dev
           - libgstreamer1.0-0
           - libhdf5-dev
-          - libisl23:armhf
           - liblapack-dev
-          - libmpc3:armhf
-          - libmpfr6:armhf
           - libncursesw5-dev
           - libnetfilter-queue-dev
           - libopenblas-dev
@@ -135,7 +131,6 @@
           - libsqlite3-dev
           - libssl-dev
           - libssl-ocaml-dev
-          - libstdc++6:armhf
           - libswscale5
           - libtiff6
           - libtool
@@ -173,10 +168,8 @@
           - wl
           - xxd
           - zlib1g-dev
-          - zram-tools
   environment:
     ARCHFLAGS: "-arch aarch64"
-    QEMU_UNAME: "{{ kernel.full }}"
     
   tasks:
     # First we install packages
@@ -187,6 +180,12 @@
         update_cache: yes
         install_recommends: false
 
+    - name: update pip3, setuptools, wheel
+      shell: "python3 -m pip install --upgrade pip setuptools wheel --break-system-packages"
+      args:
+        executable: /bin/bash
+        chdir: /usr/local/src
+
     # Now we set up /boot/firmware
     - name: Create pi user
       copy:
@@ -298,22 +297,9 @@
         state: absent
         path: /usr/local/src/hcxtools
 
-    # Install nexmon to fix wireless scanning (takes 2.5G of space)
-    - name: symlink 1
-      file:
-        src: "/usr/lib/arm-linux-gnueabihf/libisl.so.23.2.0"
-        dest: "/usr/lib/arm-linux-gnueabihf/libisl.so.10"
-        state: link
-
-    - name: symlink 2
-      file:
-        src: "/usr/lib/arm-linux-gnueabihf/libmpfr.so.6.2.0"
-        dest: "/usr/lib/arm-linux-gnueabihf/libmpfr.so.4"
-        state: link
-
     - name: clone nexmon repository
       git:
-        repo: https://github.com/seemoo-lab/nexmon.git
+        repo: https://github.com/DrSchottky/nexmon.git
         dest: /usr/local/src/nexmon
 
     # FIRST WE BUILD DRIVER FOR RPi5
@@ -366,7 +352,7 @@
 
     - name: clone nexmon repository
       git:
-        repo: https://github.com/seemoo-lab/nexmon.git
+        repo: https://github.com/DrSchottky/nexmon.git
         dest: /usr/local/src/nexmon
 
     - name: make firmware, RPi4
@@ -479,7 +465,7 @@
 
     - name: clone pwnagotchi repository
       git:
-        repo: https://github.com/jayofelony/pwnagotchi-bookworm.git
+        repo: https://github.com/jayofelony/pwnagotchi.git
         dest: /usr/local/src/pwnagotchi
 
     - name: build pwnagotchi wheel
@@ -511,6 +497,11 @@
         block: |
           export GOPATH=$HOME/go
           export PATH=/usr/local/go/bin:$PATH:$GOPATH/bin
+          alias custom='cd /usr/local/share/pwnagotchi/custom-plugins/'
+          alias config='sudo nano /etc/pwnagotchi/config.toml'
+          alias pwnlog='tail -f -n300 /etc/pwnagotchi/log/pwn*.log | sed --unbuffered "s/,[[:digit:]]\\{3\\}\\]//g" | cut -d " " -f 2-'
+          alias pwnver='python3 -c "import pwnagotchi as p; print(p.__version__)"'
+          alias pwnkill='sudo killall -USR1 pwnagotchi'
       when: golang.changed
 
     - name: download pwngrid
@@ -534,7 +525,7 @@
         repo: "{{ packages.bettercap.source }}"
         dest: /usr/local/src/bettercap
 
-    - name: install bettercap 2.32.2
+    - name: install bettercap 2.32.4
       shell: "export GOPATH=$HOME/go && export PATH=/usr/local/go/bin:$PATH:$GOPATH/bin && go mod tidy && make && make install"
       args:
         executable: /bin/bash
@@ -587,11 +578,6 @@
         path: /etc/pwnagotchi
         state: directory
 
-    - name: create log folder
-      file:
-        path: /home/pi/logs
-        state: directory
-
     - name: check if user configuration exists
       stat:
         path: /etc/pwnagotchi/config.toml
@@ -604,7 +590,7 @@
           # Add your configuration overrides on this file any configuration changes done to default.toml will be lost!
           # Example:
           # ui.display.enabled = true
-          # ui.display.type = "waveshare_2"
+          # ui.display.type = "waveshare_4"
       when: not user_config.stat.exists
 
     - name: Delete motd
@@ -617,24 +603,6 @@
         state: absent
         path: /etc/update-motd.d/10-uname
 
-    - name: Add pwnlog alias
-      lineinfile:
-        dest: /home/pi/.bashrc
-        line: "\nalias pwnlog='tail -f -n300 /home/pi/logs/pwn*.log | sed --unbuffered \"s/,[[:digit:]]\\{3\\}\\]//g\" | cut -d \" \" -f 2-'"
-        insertafter: EOF
-
-    - name: Add pwnver alias
-      lineinfile:
-        dest: /home/pi/.bashrc
-        line: "\nalias pwnver='python3 -c \"import pwnagotchi as p; print(p.__version__)\"'"
-        insertafter: EOF
-
-    - name: Add pwnkill alias to restart pwnagotchi with a signal
-      lineinfile:
-        dest: /home/pi/.bashrc
-        line: "\nalias pwnkill='sudo killall -USR1 pwnagotchi'"
-        insertafter: EOF
-
     - name: add firmware packages to hold
       dpkg_selections:
         name: "{{ item }}"

builder/data/64bit/root/settings.yaml

@@ -0,0 +1,15 @@
+client_config_backend: file
+client_config_file: /root/client_secrets.json
+client_config:
+    client_id: <YOUR CLIENT ID>
+    client_secret: <YOUR CLIENT SECRET>
+
+save_credentials: True
+save_credentials_backend: file
+save_credentials_file: /root/credentials.json
+
+get_refresh_token: True
+
+oauth_scope:
+    - https://www.googleapis.com/auth/drive
+    - https://www.googleapis.com/auth/drive.install

builder/data/64bit/usr/bin/hdmioff

@@ -0,0 +1,2 @@
+#!/usr/bin/env bash
+sudo /usr/bin/tvservice -o

builder/data/64bit/usr/bin/hdmion

@@ -0,0 +1,2 @@
+#!/usr/bin/env bash
+sudo /usr/bin/tvservice -p

builder/data/64bit/usr/bin/monstart

@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+source /usr/bin/pwnlib
+start_monitor_interface

builder/data/64bit/usr/bin/monstop

@@ -0,0 +1,3 @@
+#!/usr/bin/env bash
+source /usr/bin/pwnlib
+stop_monitor_interface

builder/data/64bit/usr/bin/pwnagotchi-launcher

@@ -0,0 +1,16 @@
+#!/usr/bin/env bash
+source /usr/bin/pwnlib
+
+# we need to decrypt something
+if is_crypted_mode; then
+  while ! is_decrypted; do
+    echo "Waiting for decryption..."
+    sleep 1
+  done
+fi
+
+if is_auto_mode; then
+  /usr/local/bin/pwnagotchi
+else
+  /usr/local/bin/pwnagotchi --manual
+fi

builder/data/etc/default/zramswap

@@ -1,15 +0,0 @@
-# Specifies amount of zram devices to create.
-# By default, zramswap-start will use all available cores.
-#CORES=1
-
-# Specifies the amount of RAM that should be used for zram
-# based on a percentage the total amount of available memory
-PERCENTAGE=60
-
-# Specifies a static amount of RAM that should be used for
-# the ZRAM devices, this is in MiB
-#ALLOCATION=256
-
-# Specifies the priority for the swap devices, see swapon(2)
-# for more details.
-#PRIORITY=100

pwnagotchi/_version.py

@@ -1 +1 @@
-__version__ = '2.8.2'
+__version__ = '2.8.6'

pwnagotchi/ai/__init__.py

@@ -23,6 +23,12 @@ def load(config, agent, epoch, from_disk=True):
         from stable_baselines3 import A2C
         logging.debug("[AI] A2C imported in %.2fs" % (time.time() - start))
 
+        # remove invalid ai.parameters leftover from tensor_flow, if present
+        for key in [ 'alpha', 'epsilon', 'lr_schedule' ]:
+            if key in config['params']:
+                logging.info("Removing legacy ai parameter %s" % key);
+                del config['params'][key]
+        
         start = time.time()
         from stable_baselines3.a2c import MlpPolicy
         logging.debug("[AI] MlpPolicy imported in %.2fs" % (time.time() - start))

pwnagotchi/defaults.toml

@@ -18,10 +18,6 @@ main.custom_plugin_repos = [
 
 main.custom_plugins = "/usr/local/share/pwnagotchi/custom-plugins/"
 
-main.plugins.aircrackonly.enabled = true
-
-main.plugins.hashie.enabled = true
-
 main.plugins.auto-update.enabled = true
 main.plugins.auto-update.install = true
 main.plugins.auto-update.interval = 1
@@ -36,7 +32,7 @@ main.plugins.bt-tether.devices.android-phone.netmask = 24
 main.plugins.bt-tether.devices.android-phone.interval = 1
 main.plugins.bt-tether.devices.android-phone.scantime = 10
 main.plugins.bt-tether.devices.android-phone.max_tries = 10
-main.plugins.bt-tether.devices.android-phone.share_internet = false
+main.plugins.bt-tether.devices.android-phone.share_internet = true
 main.plugins.bt-tether.devices.android-phone.priority = 1
 
 main.plugins.bt-tether.devices.ios-phone.enabled = false
@@ -47,7 +43,7 @@ main.plugins.bt-tether.devices.ios-phone.netmask = 24
 main.plugins.bt-tether.devices.ios-phone.interval = 5
 main.plugins.bt-tether.devices.ios-phone.scantime = 20
 main.plugins.bt-tether.devices.ios-phone.max_tries = 0
-main.plugins.bt-tether.devices.ios-phone.share_internet = false
+main.plugins.bt-tether.devices.ios-phone.share_internet = true
 main.plugins.bt-tether.devices.ios-phone.priority = 999
 
 main.plugins.fix_services.enabled = true
@@ -118,7 +114,7 @@ main.no_restart = false
 
 main.filter = ""
 
-main.log.path = "/home/pi/logs/pwnagotchi.log"
+main.log.path = "/etc/pwnagotchi/log/pwnagotchi.log"
 main.log.rotation.enabled = true
 main.log.rotation.size = "10M"
 
@@ -156,6 +152,10 @@ personality.bond_encounters_factor = 20000
 personality.throttle_a = 0.4
 personality.throttle_d = 0.9
 
+personality.clear_on_exit = true # clear display when shutting down cleanly
+
+ui.invert = false # false = black background, true = white background
+
 ui.fps = 0.0
 ui.font.name = "DejaVuSansMono" # for japanese: fonts-japanese-gothic
 ui.font.size_offset = 0 # will be added to the font size
@@ -185,6 +185,9 @@ ui.faces.debug = "(#__#)"
 ui.faces.upload = "(1__0)"
 ui.faces.upload1 = "(1__1)"
 ui.faces.upload2 = "(0__1)"
+ui.faces.png = false
+ui.faces.position_x = 0
+ui.faces.position_y = 34
 
 ui.web.enabled = true
 ui.web.address = "::" # listening on both ipv4 and ipv6 - switch to 0.0.0.0 to listen on just ipv4
@@ -216,7 +219,7 @@ bettercap.silence = [
 
 fs.memory.enabled = true
 fs.memory.mounts.log.enabled = true
-fs.memory.mounts.log.mount = "/home/pi/logs"
+fs.memory.mounts.log.mount = "/etc/pwnagotchi/log/"
 fs.memory.mounts.log.size = "50M"
 fs.memory.mounts.log.sync = 60
 fs.memory.mounts.log.zram = true

pwnagotchi/grid.py

@@ -89,7 +89,7 @@ def update_data(last_session):
         'uname': subprocess.getoutput("uname -a"),
         'brain': brain,
         'version': pwnagotchi.__version__,
-        'build': "Pwnagotchi-Torch by Jayofelony",
+        'build': "Pwnagotchi by Jayofelony",
         'plugins': enabled,
         'language': language,
         'bettercap': subprocess.getoutput("bettercap -version").split(".\n\n")[1],

pwnagotchi/locale/es/LC_MESSAGES/voice.po

@@ -36,18 +36,18 @@ msgid "The neural network is ready."
 msgstr "La red neuronal está lista."
 
 msgid "Generating keys, do not turn off ..."
-msgstr ""
+msgstr "Generando llaves, no me apagues ..."
 
 #, python-brace-format
 msgid "Hey, channel {channel} is free! Your AP will say thanks."
 msgstr "¡Oye, el canal {channel} está libre! Tu AP lo agradecerá."
 
 msgid "Reading last session logs ..."
-msgstr ""
+msgstr "Leyendo los logs de la última sesión ..."
 
 #, python-brace-format
 msgid "Read {lines_so_far} log lines so far ..."
-msgstr ""
+msgstr "Leyendo {lines_so_far} líneas de log hasta ahora ..."
 
 msgid "I'm bored ..."
 msgstr "Estoy aburrido ..."
@@ -74,7 +74,7 @@ msgid "Leave me alone ..."
 msgstr "Me siento tan solo ..."
 
 msgid "I'm mad at you!"
-msgstr ""
+msgstr "Toy re enojado con vos!"
 
 msgid "I'm living the life!"
 msgstr "¡Estoy viviendo la vida!"
@@ -97,11 +97,11 @@ msgstr "¡Hola {name}! Encantado de conocerte."
 
 #, python-brace-format
 msgid "Yo {name}! Sup?"
-msgstr ""
+msgstr "Que onda {name}!?"
 
 #, python-brace-format
 msgid "Hey {name} how are you doing?"
-msgstr ""
+msgstr "Eh!, ¿Que haces {name}?"
 
 #, python-brace-format
 msgid "Unit {name} is nearby!"
@@ -127,10 +127,10 @@ msgid "Missed!"
 msgstr "¡Perdido!"
 
 msgid "Good friends are a blessing!"
-msgstr ""
+msgstr "Lxs buenxs amigxs son una masa!"
 
 msgid "I love my friends!"
-msgstr ""
+msgstr "¡Amo a mis amigxs!"
 
 msgid "Nobody wants to play with me ..."
 msgstr "Nadie quiere jugar conmigo ..."
@@ -143,7 +143,7 @@ msgstr "¡¿Dónde está todo el mundo?!"
 
 #, python-brace-format
 msgid "Napping for {secs}s ..."
-msgstr "Descansando durante {secs}s ..."
+msgstr "Descansando por {secs}s ..."
 
 msgid "Zzzzz"
 msgstr "Zzzzz"
@@ -203,7 +203,7 @@ msgstr "Oops, algo salió mal ... Reiniciando ..."
 
 #, python-brace-format
 msgid "Uploading data to {to} ..."
-msgstr ""
+msgstr "Subiendo data a {to} ..."
 
 #, python-brace-format
 msgid "Downloading from {name} ..."

pwnagotchi/locale/voice.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-01-25 23:40+0100\n"
+"POT-Creation-Date: 2024-02-16 15:26-0300\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"

pwnagotchi/plugins/cmd.py

@@ -199,6 +199,9 @@ def list_plugins(args, config, pattern='*'):
     available_not_installed = set(available.keys()) - set(installed.keys())
 
     max_len_list = available_and_installed if args.installed else available_not_installed
+    if not max_len_list:
+        print('Maybe try: sudo pwnagotchi plugins update')
+        return 1
     max_len = max(map(len, max_len_list))
     header = line.format(name='Plugin', width=max_len, version='Version', enabled='Active', status='Status')
     line_length = max(max_len, len('Plugin')) + len(header) - len('Plugin') - 12  # lol
@@ -239,7 +242,7 @@ def list_plugins(args, config, pattern='*'):
     print('-' * line_length)
 
     if not found:
-        logging.info('Maybe try: pwnagotchi plugins update')
+        print('Maybe try: sudo pwnagotchi plugins update')
         return 1
     return 0
 

pwnagotchi/plugins/default/aircrackonly.py

@@ -1,73 +0,0 @@
-import pwnagotchi.plugins as plugins
-
-import logging
-import subprocess
-import string
-import os
-
-'''
-Aircrack-ng needed, to install:
-> apt-get install aircrack-ng
-'''
-
-
-class AircrackOnly(plugins.Plugin):
-    __author__ = 'pwnagotchi [at] rossmarks [dot] uk'
-    __version__ = '1.0.1'
-    __license__ = 'GPL3'
-    __description__ = 'confirm pcap contains handshake/PMKID or delete it'
-
-    def __init__(self):
-        self.text_to_set = ""
-        self.options = dict()
-
-    def on_ready(self):
-        return
-
-    def on_loaded(self):
-        logging.info("aircrackonly plugin loaded")
-
-        if 'face' not in self.options:
-            self.options['face'] = '(>.<)'
-
-        check = subprocess.run(
-            '/usr/bin/dpkg -l aircrack-ng | grep aircrack-ng | awk \'{print $2, $3}\'', shell=True,
-            stdout=subprocess.PIPE)
-        check = check.stdout.decode('utf-8').strip()
-        if check != "aircrack-ng <none>":
-            logging.info("aircrackonly: Found " + check)
-        else:
-            logging.warning("aircrack-ng is not installed!")
-
-    def on_handshake(self, agent, filename, access_point, client_station):
-        display = agent.view()
-        to_delete = 0
-        handshake_found = 0
-
-        result = subprocess.run(('/usr/bin/aircrack-ng ' + filename + ' | grep "1 handshake" | awk \'{print $2}\''),
-                                shell=True, stdout=subprocess.PIPE)
-        result = result.stdout.decode('utf-8').translate({ord(c): None for c in string.whitespace})
-        if result:
-            handshake_found = 1
-            logging.info("[AircrackOnly] contains handshake")
-
-        if handshake_found == 0:
-            result = subprocess.run(('/usr/bin/aircrack-ng ' + filename + ' | grep "PMKID" | awk \'{print $2}\''),
-                                    shell=True, stdout=subprocess.PIPE)
-            result = result.stdout.decode('utf-8').translate({ord(c): None for c in string.whitespace})
-            if result:
-                logging.info("[AircrackOnly] contains PMKID")
-            else:
-                to_delete = 1
-
-        if to_delete == 1:
-            os.remove(filename)
-            self.text_to_set = "Removed an uncrackable pcap"
-            logging.warning("Removed uncrackable pcap " + filename)
-            display.update(force=True)
-
-    def on_ui_update(self, ui):
-        if self.text_to_set:
-            ui.set('face', self.options['face'])
-            ui.set('status', self.text_to_set)
-            self.text_to_set = ""

pwnagotchi/plugins/default/auto-update.py

@@ -28,7 +28,8 @@ def check(version, repo, native=True):
     resp = requests.get("https://api.github.com/repos/%s/releases/latest" % repo)
     latest = resp.json()
     info['available'] = latest_ver = latest['tag_name'].replace('v', '')
-    is_arm64 = info['arch'].startswith('aarch')
+    is_armhf = info['arch'].startswith('arm')
+    is_aarch = info['arch'].startswith('aarch')
 
     local = version_to_tuple(info['current'])
     remote = version_to_tuple(latest_ver)
@@ -36,12 +37,20 @@ def check(version, repo, native=True):
         if not native:
             info['url'] = "https://github.com/%s/archive/%s.zip" % (repo, latest['tag_name'])
         else:
-            if is_arm64:
+            if is_armhf:
-                # check if this release is compatible with aarch64
+                # check if this release is compatible with armhf
                 for asset in latest['assets']:
                     download_url = asset['browser_download_url']
                     if (download_url.endswith('.zip') and
-                            (info['arch'] in download_url or (is_arm64 and 'aarch64' in download_url))):
+                            (info['arch'] in download_url or (is_armhf and 'armhf' in download_url))):
+                        info['url'] = download_url
+                        break
+            elif is_aarch:
+                # check if this release is compatible with arm64/aarch64
+                for asset in latest['assets']:
+                    download_url = asset['browser_download_url']
+                    if (download_url.endswith('.zip') and
+                            (info['arch'] in download_url or (is_aarch and 'aarch' in download_url))):
                         info['url'] = download_url
                         break
 
@@ -189,7 +198,7 @@ class AutoUpdate(plugins.Plugin):
                 to_check = [
                     ('jayofelony/bettercap', parse_version('bettercap -version'), True, 'bettercap'),
                     ('jayofelony/pwngrid', parse_version('pwngrid -version'), True, 'pwngrid-peer'),
-                    ('jayofelony/pwnagotchi-bookworm', pwnagotchi.__version__, False, 'pwnagotchi')
+                    ('jayofelony/pwnagotchi', pwnagotchi.__version__, False, 'pwnagotchi')
                 ]
 
                 for repo, local_version, is_native, svc_name in to_check:

pwnagotchi/plugins/default/fix_services.py

@@ -11,6 +11,10 @@ from pwnagotchi import plugins
 import pwnagotchi.ui.faces as faces
 from pwnagotchi.bettercap import Client
 
+from pwnagotchi.ui.components import Text
+from pwnagotchi.ui.view import BLACK
+import pwnagotchi.ui.fonts as fonts
+
 
 class FixServices(plugins.Plugin):
     __author__ = 'jayofelony'
@@ -21,19 +25,16 @@ class FixServices(plugins.Plugin):
     __help__ = """
     Reload brcmfmac module when blindbug is detected, instead of rebooting. Adapted from WATCHDOG.
     """
-    __defaults__ = {
-        'enabled': True,
-    }
 
     def __init__(self):
         self.options = dict()
-        self.pattern1 = re.compile(r'wifi error while hopping to channel')
+        self.pattern = re.compile(r'brcmf_cfg80211_nexmon_set_channel.*?Set Channel failed')
-        self.pattern2 = re.compile(r'Firmware has halted or crashed')
+        self.pattern2 = re.compile(r'wifi error while hopping to channel')
-        self.pattern3 = re.compile(r'error 400: could not find interface wlan0mon')
+        self.pattern3 = re.compile(r'Firmware has halted or crashed')
+        self.pattern4 = re.compile(r'error 400: could not find interface wlan0mon')
         self.isReloadingMon = False
         self.connection = None
         self.LASTTRY = 0
-        self._count = 0
 
     def on_loaded(self):
         """
@@ -42,14 +43,27 @@ class FixServices(plugins.Plugin):
         logging.info("[Fix_Services] plugin loaded.")
 
     def on_ready(self, agent):
-        last_lines = self.get_last_lines('journalctl', ['-n10', '-k'], 10)
+        last_lines = ''.join(list(TextIOWrapper(subprocess.Popen(['journalctl', '-n10', '-k'],
+                                                                 stdout=subprocess.PIPE).stdout))[-10:])
         try:
             cmd_output = subprocess.check_output("ip link show wlan0mon", shell=True)
             logging.debug("[Fix_Services ip link show wlan0mon]: %s" % repr(cmd_output))
             if ",UP," in str(cmd_output):
-                logging.info("wlan0mon is up.")
+                logging.debug("wlan0mon is up.")
 
-            logging.info("[Fix_Services] Logs look good!")
+            if len(self.pattern.findall(last_lines)) >= 3:
+                if hasattr(agent, 'view'):
+                    display = agent.view()
+                    display.set('status', 'Blind-Bug detected. Restarting.')
+                    display.update(force=True)
+                logging.debug('[Fix_Services] Blind-Bug detected. Restarting.')
+                try:
+                    self._tryTurningItOffAndOnAgain(agent)
+                except Exception as err:
+                    logging.warning("[Fix_Services turnOffAndOn] %s" % repr(err))
+
+            else:
+                logging.debug("[Fix_Services] Logs look good!")
 
         except Exception as err:
             logging.error("[Fix_Services ip link show wlan0mon]: %s" % repr(err))
@@ -63,12 +77,12 @@ class FixServices(plugins.Plugin):
     # apparently this only gets messages from bettercap going to syslog, not from syslog
     def on_bcap_sys_log(self, agent, event):
         if re.search('wifi error while hopping to channel', event['data']['Message']):
-            logging.info("[Fix_Services]SYSLOG MATCH: %s" % event['data']['Message'])
+            logging.debug("[Fix_Services]SYSLOG MATCH: %s" % event['data']['Message'])
-            logging.info("[Fix_Services]**** restarting wifi.recon")
+            logging.debug("[Fix_Services]**** restarting wifi.recon")
             try:
                 result = agent.run("wifi.recon off; wifi.recon on")
                 if result["success"]:
-                    logging.info("[Fix_Services] wifi.recon flip: success!")
+                    logging.debug("[Fix_Services] wifi.recon flip: success!")
                     if hasattr(agent, 'view'):
                         display = agent.view()
                         if display:
@@ -82,23 +96,14 @@ class FixServices(plugins.Plugin):
                 logging.error("[Fix_Services]SYSLOG wifi.recon flip fail: %s" % err)
                 self._tryTurningItOffAndOnAgain(agent)
 
-    def get_last_lines(self, command, args, n):
-        try:
-            process = subprocess.Popen([command] + args, stdout=subprocess.PIPE)
-            output = TextIOWrapper(process.stdout)
-            lines = output.readlines()
-            last_n_lines = ''.join(lines[-n:])
-            return last_n_lines
-        except Exception as e:
-            print(f"Error occurred: {e}")
-            return None
-
     def on_epoch(self, agent, epoch, epoch_data):
-
+        last_lines = ''.join(list(TextIOWrapper(subprocess.Popen(['journalctl', '-n10', '-k'],
-        last_lines = self.get_last_lines('journalctl', ['-n10', '-k'], 10)
+                                                                 stdout=subprocess.PIPE).stdout))[-10:])
-        other_last_lines = self.get_last_lines('journalctl', ['-n10'], 10)
+        other_last_lines = ''.join(list(TextIOWrapper(subprocess.Popen(['journalctl', '-n10'],
-        other_other_last_lines = self.get_last_lines('tail', ['-n10', '/home/pi/logs/pwnagotchi.log'], 10)
+                                                                       stdout=subprocess.PIPE).stdout))[-10:])
-
+        other_other_last_lines = ''.join(
+            list(TextIOWrapper(subprocess.Popen(['tail', '-n10', '/var/log/pwnagotchi.log'],
+                                                stdout=subprocess.PIPE).stdout))[-10:])
         # don't check if we ran a reset recently
         logging.debug("[Fix_Services]**** epoch")
         if time.time() - self.LASTTRY > 180:
@@ -108,18 +113,31 @@ class FixServices(plugins.Plugin):
             logging.debug("[Fix_Services]**** checking")
 
             # Look for pattern 1
-            if len(self.pattern1.findall(other_last_lines)) >= 5:
+            if len(self.pattern.findall(last_lines)) >= 3:
+                logging.debug("[Fix_Services]**** Should trigger a reload of the wlan0mon device:\n%s" % last_lines)
+                if hasattr(agent, 'view'):
+                    display = agent.view()
+                    display.set('status', 'Blind-Bug detected. Restarting.')
+                    display.update(force=True)
+                logging.debug('[Fix_Services] Blind-Bug detected. Restarting.')
+                try:
+                    self._tryTurningItOffAndOnAgain(agent)
+                except Exception as err:
+                    logging.warning("[Fix_Services] TTOAOA: %s" % repr(err))
+
+            # Look for pattern 2
+            elif len(self.pattern2.findall(other_last_lines)) >= 5:
                 logging.debug("[Fix_Services]**** Should trigger a reload of the wlan0mon device:\n%s" % last_lines)
                 if hasattr(agent, 'view'):
                     display = agent.view()
                     display.set('status', 'Wifi channel stuck. Restarting recon.')
                     display.update(force=True)
-                logging.info('[Fix_Services] Wifi channel stuck. Restarting recon.')
+                logging.debug('[Fix_Services] Wifi channel stuck. Restarting recon.')
 
                 try:
                     result = agent.run("wifi.recon off; wifi.recon on")
                     if result["success"]:
-                        logging.info("[Fix_Services] wifi.recon flip: success!")
+                        logging.debug("[Fix_Services] wifi.recon flip: success!")
                         if display:
                             display.update(force=True, new_data={"status": "Wifi recon flipped!",
                                                                  "face": faces.COOL})
@@ -131,9 +149,9 @@ class FixServices(plugins.Plugin):
                 except Exception as err:
                     logging.error("[Fix_Services wifi.recon flip] %s" % repr(err))
 
-            # Look for pattern 2
+            # Look for pattern 3
-            elif len(self.pattern2.findall(other_last_lines)) >= 1:
+            elif len(self.pattern3.findall(other_last_lines)) >= 1:
-                logging.info("[Fix_Services] Firmware has halted or crashed. Restarting wlan0mon.")
+                logging.debug("[Fix_Services] Firmware has halted or crashed. Restarting wlan0mon.")
                 if hasattr(agent, 'view'):
                     display = agent.view()
                     display.set('status', 'Firmware has halted or crashed. Restarting wlan0mon.')
@@ -145,9 +163,9 @@ class FixServices(plugins.Plugin):
                 except Exception as err:
                     logging.error("[Fix_Services monstart]: %s" % repr(err))
 
-            # Look for pattern 3
+            # Look for pattern 4
-            elif len(self.pattern3.findall(other_other_last_lines)) >= 3:
+            elif len(self.pattern4.findall(other_other_last_lines)) >= 3:
-                logging.info("[Fix_Services] wlan0 is down!")
+                logging.debug("[Fix_Services] wlan0 is down!")
                 if hasattr(agent, 'view'):
                     display = agent.view()
                     display.set('status', 'Restarting wlan0 now!')
@@ -171,7 +189,7 @@ class FixServices(plugins.Plugin):
             elif level == "debug":
                 logging.debug(message)
             else:
-                logging.info(message)
+                logging.debug(message)
 
             if ui:
                 ui.update(force=force, new_data=displayData)
@@ -186,7 +204,7 @@ class FixServices(plugins.Plugin):
         # avoid overlapping restarts, but allow it if it's been a while
         # (in case the last attempt failed before resetting "isReloadingMon")
         if self.isReloadingMon and (time.time() - self.LASTTRY) < 180:
-            logging.info("[Fix_Services] Duplicate attempt ignored")
+            logging.debug("[Fix_Services] Duplicate attempt ignored")
         else:
             self.isReloadingMon = True
             self.LASTTRY = time.time()
@@ -213,7 +231,7 @@ class FixServices(plugins.Plugin):
                 cmd_output = subprocess.check_output("ip link show wlan0mon", shell=True)
                 logging.debug("[Fix_Services ip link show wlan0mon]: %s" % repr(cmd_output))
                 if ",UP," in str(cmd_output):
-                    logging.info("wlan0mon is up. Skip reset?")
+                    logging.debug("wlan0mon is up. Skip reset?")
                     # not reliable, so don't skip just yet
                     # print("wlan0mon is up. Skipping reset.")
                     # self.isReloadingMon = False
@@ -234,7 +252,7 @@ class FixServices(plugins.Plugin):
             except Exception as err:
                 logging.error("[Fix_Services wifi.recon off] error  %s" % (repr(err)))
 
-            logging.info("[Fix_Services] recon paused. Now trying wlan0mon reload")
+            logging.debug("[Fix_Services] recon paused. Now trying wlan0mon reload")
 
             try:
                 cmd_output = subprocess.check_output("monstop", shell=True)
@@ -250,14 +268,13 @@ class FixServices(plugins.Plugin):
             #
             # Future: while "not fixed yet": blah blah blah. if "max_attemts", then reboot like the old days
             #
-            tries = 0
+            tries = 1
             while tries < 3:
                 try:
                     # unload the module
                     cmd_output = subprocess.check_output("sudo modprobe -r brcmfmac", shell=True)
                     self.logPrintView("info", "[Fix_Services] unloaded brcmfmac", display,
                                       {"status": "Turning it off #%s" % tries, "face": faces.SMART})
-                    time.sleep(1 + tries)
 
                     # reload the module
                     try:
@@ -265,27 +282,25 @@ class FixServices(plugins.Plugin):
                         cmd_output = subprocess.check_output("sudo modprobe brcmfmac", shell=True)
 
                         self.logPrintView("info", "[Fix_Services] reloaded brcmfmac")
-                        time.sleep(10 + 4 * tries)  # give it some time for wlan device to stabilize, or whatever
 
                         # success! now make the mon0
                         try:
                             cmd_output = subprocess.check_output("monstart", shell=True)
-                            self.logPrintView("info", "[Fix_Services interface add wlan0mon] worked #%s: %s"
+                            self.logPrintView("info", "[Fix_Services interface add wlan0mon worked #%s: %s"
                                               % (tries, cmd_output))
-                            time.sleep(tries + 5)
                             try:
                                 # try accessing mon0 in bettercap
                                 result = connection.run("set wifi.interface wlan0mon")
                                 if "success" in result:
-                                    logging.info("[Fix_Services set wifi.interface wlan0mon] worked!")
+                                    logging.debug("[Fix_Services set wifi.interface wlan0mon worked!")
-                                    self._count = self._count + 1
-                                    time.sleep(1)
                                     # stop looping and get back to recon
                                     break
                                 else:
-                                    logging.debug("[Fix_Services set wifi.interfaceface wlan0mon] failed? %s" % repr(result))
+                                    logging.debug(
+                                        "[Fix_Services set wifi.interfaceface wlan0mon] failed? %s" % repr(result))
                             except Exception as err:
-                                logging.debug("[Fix_Services set wifi.interface wlan0mon] except: %s" % repr(err))
+                                logging.debug(
+                                    "[Fix_Services set wifi.interface wlan0mon] except: %s" % repr(err))
                         except Exception as cerr:  #
                             if not display:
                                 print("failed loading wlan0mon attempt #%s: %s" % (tries, repr(cerr)))
@@ -303,11 +318,11 @@ class FixServices(plugins.Plugin):
 
                 tries = tries + 1
                 if tries < 3:
-                    logging.info("[Fix_Services] wlan0mon didn't make it. trying again")
+                    logging.debug("[Fix_Services] wlan0mon didn't make it. trying again")
                     if not display:
                         print(" wlan0mon didn't make it. trying again")
                 else:
-                    logging.info("[Fix_Services] wlan0mon loading failed, no choice but to reboot ..")
+                    logging.debug("[Fix_Services] wlan0mon loading failed, no choice but to reboot ..")
                     pwnagotchi.reboot()
 
             # exited the loop, so hopefully it loaded
@@ -317,14 +332,14 @@ class FixServices(plugins.Plugin):
                                                          "face": faces.INTENSE})
                 else:
                     print("And back on again...")
-                logging.info("[Fix_Services] wlan0mon back up")
+                logging.debug("[Fix_Services] wlan0mon back up")
             else:
                 self.LASTTRY = time.time()
 
             time.sleep(8 + tries * 2)  # give it a bit before restarting recon in bettercap
             self.isReloadingMon = False
 
-            logging.info("[Fix_Services] re-enable recon")
+            logging.debug("[Fix_Services] re-enable recon")
             try:
                 result = connection.run("wifi.clear; wifi.recon on")
 
@@ -345,13 +360,24 @@ class FixServices(plugins.Plugin):
                 logging.error("[Fix_Services wifi.recon on] %s" % repr(err))
                 pwnagotchi.reboot()
 
-    def on_unload(self, ui):
+    # called to setup the ui elements
+    def on_ui_setup(self, ui):
         with ui._lock:
-            try:
+            # add custom UI elements
-                logging.info("[Fix_Services] unloaded")
+            if "position" in self.options:
-            except Exception as err:
+                pos = self.options['position'].split(',')
-                logging.error("[Fix_Services] unload err %s " % repr(err))
+                pos = [int(x.strip()) for x in pos]
-            pass
+            else:
+                pos = (ui.width() / 2 + 35, ui.height() - 11)
+
+            logging.debug("Got here")
+
+    # called when the ui is updated
+    def on_ui_update(self, ui):
+        return
+
+    def on_unload(self, ui):
+        return
 
 
 # run from command line to brute force a reload

pwnagotchi/plugins/default/hashie.py

@@ -1,179 +0,0 @@
-import logging
-import subprocess
-import os
-import json
-import pwnagotchi.plugins as plugins
-from threading import Lock
-
-'''
-hcxpcapngtool needed, to install:
-> git clone https://github.com/ZerBea/hcxtools.git
-> cd hcxtools
-> apt-get install libcurl4-openssl-dev libssl-dev zlib1g-dev
-> make
-> sudo make install
-'''
-
-
-class Hashie(plugins.Plugin):
-    __author__ = 'Jayofelony'
-    __version__ = '1.0.4'
-    __license__ = 'GPL3'
-    __description__ = '''
-                        Attempt to automatically convert pcaps to a crackable format.
-                        If successful, the files  containing the hashes will be saved 
-                        in the same folder as the handshakes. 
-                        The files are saved in their respective Hashcat format:
-                          - EAPOL hashes are saved as *.22000
-                          - PMKID hashes are saved as *.16800
-                        All PCAP files without enough information to create a hash are
-                          stored in a file that can be read by the webgpsmap plugin.
-
-                        Why use it?:
-                          - Automatically convert handshakes to crackable formats! 
-                              We dont all upload our hashes online ;)
-                          - Repair PMKID handshakes that hcxpcapngtool misses
-                          - If running at time of handshake capture, on_handshake can
-                              be used to improve the chance of the repair succeeding
-                          - Be a completionist! Not enough packets captured to crack a network?
-                              This generates an output file for the webgpsmap plugin, use the
-                              location data to revisit networks you need more packets for!
-
-                        Additional information:
-                          - Currently requires hcxpcapngtool compiled and installed
-                          - Attempts to repair PMKID hashes when hcxpcapngtool cant find the SSID
-                            - hcxpcapngtool sometimes has trouble extracting the SSID, so we 
-                                use the raw 16800 output and attempt to retrieve the SSID via tcpdump
-                            - When access_point data is available (on_handshake), we leverage 
-                                the reported AP name and MAC to complete the hash
-                            - The repair is very basic and could certainly be improved!
-                        Todo:
-                          Make it so users dont need hcxpcapngtool (unless it gets added to the base image)
-                              Phase 1: Extract/construct 22000/16800 hashes through tcpdump commands
-                              Phase 2: Extract/construct 22000/16800 hashes entirely in python
-                          Improve the code, a lot
-                        '''
-
-    def __init__(self):
-        self.lock = Lock()
-        self.options = dict()
-
-    def on_loaded(self):
-        logging.info("[Hashie] Plugin loaded")
-
-    def on_unloaded(self):
-        logging.info("[Hashie] Plugin unloaded")
-
-    # called when everything is ready and the main loop is about to start
-    def on_ready(self, agent):
-        config = agent.config()
-        handshake_dir = config['bettercap']['handshakes']
-
-        logging.info('[Hashie] Starting batch conversion of pcap files')
-        with self.lock:
-            self._process_stale_pcaps(handshake_dir)
-
-    def on_handshake(self, agent, filename, access_point, client_station):
-        with self.lock:
-            handshake_status = []
-            fullpathNoExt = filename.split('.')[0]
-            name = filename.split('/')[-1:][0].split('.')[0]
-
-            if os.path.isfile(fullpathNoExt + '.22000'):
-                handshake_status.append('Already have {}.22000 (EAPOL)'.format(name))
-            elif self._writeEAPOL(filename):
-                handshake_status.append('Created {}.22000 (EAPOL) from pcap'.format(name))
-
-            if os.path.isfile(fullpathNoExt + '.16800'):
-                handshake_status.append('Already have {}.16800 (PMKID)'.format(name))
-            elif self._writePMKID(filename):
-                handshake_status.append('Created {}.16800 (PMKID) from pcap'.format(name))
-
-            if handshake_status:
-                logging.info('[Hashie] Good news:\n\t' + '\n\t'.join(handshake_status))
-
-    def _writeEAPOL(self, fullpath):
-        fullpathNoExt = fullpath.split('.')[0]
-        filename = fullpath.split('/')[-1:][0].split('.')[0]
-        subprocess.getoutput('hcxpcapngtool -o {}.22000 {} >/dev/null 2>&1'.format(fullpathNoExt, fullpath))
-        if os.path.isfile(fullpathNoExt + '.22000'):
-            logging.debug('[Hashie] [+] EAPOL Success: {}.22000 created'.format(filename))
-            return True
-        return False
-
-    def _writePMKID(self, fullpath):
-        fullpathNoExt = fullpath.split('.')[0]
-        filename = fullpath.split('/')[-1:][0].split('.')[0]
-        subprocess.getoutput('hcxpcapngtool -o {}.16800 {} >/dev/null 2>&1'.format(fullpathNoExt, fullpath))
-        if os.path.isfile(fullpathNoExt + '.16800'):
-            logging.debug('[Hashie] [+] PMKID Success: {}.16800 created'.format(filename))
-            return True
-        return False
-
-    def _process_stale_pcaps(self, handshake_dir):
-        handshakes_list = [os.path.join(handshake_dir, filename) for filename in os.listdir(handshake_dir) if filename.endswith('.pcap')]
-        failed_jobs = []
-        successful_jobs = []
-        lonely_pcaps = []
-        for num, handshake in enumerate(handshakes_list):
-            fullpathNoExt = handshake.split('.')[0]
-            pcapFileName = handshake.split('/')[-1:][0]
-            if not os.path.isfile(fullpathNoExt + '.22000'):  # if no 22000, try
-                if self._writeEAPOL(handshake):
-                    successful_jobs.append('22000: ' + pcapFileName)
-                else:
-                    failed_jobs.append('22000: ' + pcapFileName)
-            if not os.path.isfile(fullpathNoExt + '.16800'):  # if no 16800, try
-                if self._writePMKID(handshake):
-                    successful_jobs.append('16800: ' + pcapFileName)
-                else:
-                    failed_jobs.append('16800: ' + pcapFileName)
-                    if not os.path.isfile(fullpathNoExt + '.22000'):  # if no 16800 AND no 22000
-                        lonely_pcaps.append(handshake)
-                        logging.debug('[hashie] Batch job: added {} to lonely list'.format(pcapFileName))
-            if ((num + 1) % 50 == 0) or (num + 1 == len(handshakes_list)):  # report progress every 50, or when done
-                logging.info('[Hashie] Batch job: {}/{} done ({} fails)'.format(num + 1, len(handshakes_list), len(lonely_pcaps)))
-        if successful_jobs:
-            logging.info('[Hashie] Batch job: {} new handshake files created'.format(len(successful_jobs)))
-        if lonely_pcaps:
-            logging.info('[Hashie] Batch job: {} networks without enough packets to create a hash'.format(len(lonely_pcaps)))
-            self._getLocations(lonely_pcaps)
-
-    def _getLocations(self, lonely_pcaps):
-        # export a file for webgpsmap to load
-        with open('/root/.incompletePcaps', 'w') as isIncomplete:
-            count = 0
-            for pcapFile in lonely_pcaps:
-                filename = pcapFile.split('/')[-1:][0]  # keep extension
-                fullpathNoExt = pcapFile.split('.')[0]
-                isIncomplete.write(filename + '\n')
-                if os.path.isfile(fullpathNoExt + '.gps.json') or os.path.isfile(fullpathNoExt + '.geo.json'):
-                    count += 1
-            if count != 0:
-                logging.info('[Hashie] Used {} GPS/GEO files to find lonely networks, '
-                             'go check webgpsmap! ;)'.format(str(count)))
-            else:
-                logging.info('[Hashie] Could not find any GPS/GEO files '
-                             'for the lonely networks'.format(str(count)))
-
-    def _getLocationsCSV(self, lonely_pcaps):
-        # in case we need this later, export locations manually to CSV file, needs try/catch format/etc.
-        locations = []
-        for pcapFile in lonely_pcaps:
-            filename = pcapFile.split('/')[-1:][0].split('.')[0]
-            fullpathNoExt = pcapFile.split('.')[0]
-            if os.path.isfile(fullpathNoExt + '.gps.json'):
-                with open(fullpathNoExt + '.gps.json', 'r') as tempFileA:
-                    data = json.load(tempFileA)
-                    locations.append(filename + ',' + str(data['Latitude']) + ',' + str(data['Longitude']) + ',50')
-            elif os.path.isfile(fullpathNoExt + '.geo.json'):
-                with open(fullpathNoExt + '.geo.json', 'r') as tempFileB:
-                    data = json.load(tempFileB)
-                    locations.append(
-                        filename + ',' + str(data['location']['lat']) + ',' + str(data['location']['lng']) + ',' + str(data['accuracy']))
-        if locations:
-            with open('/root/locations.csv', 'w') as tempFileD:
-                for loc in locations:
-                    tempFileD.write(loc + '\n')
-            logging.info('[Hashie] Used {} GPS/GEO files to find lonely networks, '
-                         'load /root/locations.csv into a mapping app and go say hi!'.format(len(locations)))

pwnagotchi/plugins/default/memtemp.py

@@ -144,6 +144,9 @@ class MemTemp(plugins.Plugin):
             elif ui.is_waveshare2in7():
                 h_pos = (192, 138)
                 v_pos = (211, 122)
+            elif ui.is_waveshare1in54V2():
+                h_pos = (53, 77)
+                v_pos = (154, 65)
             else:
                 h_pos = (155, 76)
                 v_pos = (175, 61)

pwnagotchi/plugins/default/paw-gps.py

@@ -0,0 +1,42 @@
+import logging
+import requests
+import pwnagotchi.plugins as plugins
+
+'''
+You need an bluetooth connection to your android phone which is running PAW server with the GPS "hack" from Systemik and edited by shaynemk
+GUIDE HERE: https://community.pwnagotchi.ai/t/setting-up-paw-gps-on-android
+'''
+
+
+class PawGPS(plugins.Plugin):
+    __author__ = 'leont'
+    __version__ = '1.0.1'
+    __name__ = 'pawgps'
+    __license__ = 'GPL3'
+    __description__ = 'Saves GPS coordinates whenever an handshake is captured. The GPS data is get from PAW on android.'
+
+    def __init__(self):
+        self.options = dict()
+
+    def on_loaded(self):
+        logging.info("[paw-gps] plugin loaded")
+        if 'ip' not in self.options or ('ip' in self.options and self.options['ip'] is None) or (len('ip' in self.options and self.options['ip']) is 0):
+            logging.info("[paw-gps] no IP Address defined in the config file, will uses paw server default (192.168.44.1:8080)")
+
+    def on_handshake(self, agent, filename, access_point, client_station):
+        if 'ip' not in self.options or ('ip' in self.options and self.options['ip'] is None or (len('ip' in self.options and self.options['ip']) is 0)):
+            ip = "192.168.44.1:8080"
+        else:
+            ip = self.options['ip']
+
+        try:
+            gps = requests.get('http://' + ip + '/gps.xhtml')
+            try:
+                gps_filename = filename.replace('.pcap', '.paw-gps.json')
+                logging.info("[paw-gps] saving GPS data to %s" % (gps_filename))
+                with open(gps_filename, 'w+t') as f:
+                    f.write(gps.text)
+            except Exception as error:
+                logging.error(f"[paw-gps] encountered error while saving gps data: {error}")
+        except Exception as error:
+            logging.error(f"[paw-gps] encountered error while getting gps data: {error}")

pwnagotchi/ui/components.py

@@ -1,4 +1,4 @@
-from PIL import Image
+from PIL import Image, ImageOps
 from textwrap import TextWrapper
 
 
@@ -40,21 +40,37 @@ class FilledRect(Widget):
 
 
 class Text(Widget):
-    def __init__(self, value="", position=(0, 0), font=None, color=0, wrap=False, max_length=0):
+    def __init__(self, value="", position=(0, 0), font=None, color=0, wrap=False, max_length=0, png=False):
         super().__init__(position, color)
         self.value = value
         self.font = font
         self.wrap = wrap
         self.max_length = max_length
         self.wrapper = TextWrapper(width=self.max_length, replace_whitespace=False) if wrap else None
+        self.png = png
 
     def draw(self, canvas, drawer):
         if self.value is not None:
+            if not self.png:
                 if self.wrap:
                     text = '\n'.join(self.wrapper.wrap(self.value))
                 else:
                     text = self.value
                 drawer.text(self.xy, text, font=self.font, fill=self.color)
+            else:
+                self.image = Image.open(self.value)
+                self.image = self.image.convert('RGBA')
+                self.pixels = self.image.load()
+                for y in range(self.image.size[1]):
+                    for x in range(self.image.size[0]):
+                        if self.pixels[x,y][3] < 255:    # check alpha
+                            self.pixels[x,y] = (255, 255, 255, 255)
+                if self.color == 255:
+                    self._image = ImageOps.colorize(self.image.convert('L'), black = "white", white = "black")
+                else:
+                    self._image = self.image
+                self.image = self._image.convert('1')
+                canvas.paste(self.image, self.xy)
 
 
 class LabeledValue(Widget):

pwnagotchi/ui/faces.py

@@ -23,7 +23,9 @@ DEBUG = '(#__#)'
 UPLOAD = '(1__0)'
 UPLOAD1 = '(1__1)'
 UPLOAD2 = '(0__1)'
-
+PNG = False
+POSITION_X = 0
+POSITION_Y = 40
 
 def load_from_config(config):
     for face_name, face_value in config.items():

pwnagotchi/ui/hw/libs/waveshare/lcdhat144/epd.py

@@ -12,6 +12,7 @@ from . import config
 from . import LCD_1in44
 from PIL import ImageOps
 
+
 class EPD(object):
     def __init__(self):
         self.width = 128
@@ -24,8 +25,7 @@ class EPD(object):
         pass
 
     def clear(self):
-        #self.LCD.LCD_Clear()
+        self.LCD.LCD_Clear()
-        pass
 
     def display(self, image):
         rgb_im = ImageOps.colorize(image.convert("L"), black="green", white="black")

pwnagotchi/ui/hw/libs/waveshare/v2in23g/epd2in13g.py

@@ -0,0 +1,242 @@
+# *****************************************************************************
+# * | File        :	  epd2in13g.py
+# * | Author      :   Waveshare team
+# * | Function    :   Electronic paper driver
+# * | Info        :
+# *----------------
+# * | This version:   V1.0
+# * | Date        :   2023-05-29
+# # | Info        :   python demo
+# -----------------------------------------------------------------------------
+# ******************************************************************************/
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documnetation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to  whom the Software is
+# furished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+#
+
+import logging
+from .. import epdconfig
+
+import PIL
+from PIL import Image
+import io
+
+# Display resolution
+EPD_WIDTH = 122
+EPD_HEIGHT = 250
+
+logger = logging.getLogger(__name__)
+
+
+class EPD:
+    def __init__(self):
+        self.reset_pin = epdconfig.RST_PIN
+        self.dc_pin = epdconfig.DC_PIN
+        self.busy_pin = epdconfig.BUSY_PIN
+        self.cs_pin = epdconfig.CS_PIN
+        self.width = EPD_WIDTH
+        self.height = EPD_HEIGHT
+        self.BLACK = 0x000000  # 00  BGR
+        self.WHITE = 0xffffff  # 01
+        self.YELLOW = 0x00ffff  # 10
+        self.RED = 0x0000ff  # 11
+        self.Gate_BITS = EPD_HEIGHT
+        if self.width < 128:
+            self.Source_BITS = 128
+        else:
+            self.Source_BITS = self.width
+
+    # Hardware reset
+    def reset(self):
+        epdconfig.digital_write(self.reset_pin, 1)
+        epdconfig.delay_ms(200)
+        epdconfig.digital_write(self.reset_pin, 0)  # module reset
+        epdconfig.delay_ms(2)
+        epdconfig.digital_write(self.reset_pin, 1)
+        epdconfig.delay_ms(200)
+
+    def send_command(self, command):
+        epdconfig.digital_write(self.dc_pin, 0)
+        epdconfig.digital_write(self.cs_pin, 0)
+        epdconfig.spi_writebyte([command])
+        epdconfig.digital_write(self.cs_pin, 1)
+
+    def send_data(self, data):
+        epdconfig.digital_write(self.dc_pin, 1)
+        epdconfig.digital_write(self.cs_pin, 0)
+        epdconfig.spi_writebyte([data])
+        epdconfig.digital_write(self.cs_pin, 1)
+
+    def ReadBusy(self):
+        logger.debug("e-Paper busy H")
+        epdconfig.delay_ms(100)
+        while (epdconfig.digital_read(self.busy_pin) == 0):  # 0: idle, 1: busy
+            epdconfig.delay_ms(5)
+        logger.debug("e-Paper busy release")
+
+    def SetWindow(self):
+        self.send_command(0x61)  # SET_RAM_X_ADDRESS_START_END_POSITION
+        # x point must be the multiple of 8 or the last 3 bits will be ignored
+        self.send_data(self.Source_BITS / 256)
+        self.send_data(self.Source_BITS % 256)
+        self.send_data(self.Gate_BITS / 256)
+        self.send_data(self.Gate_BITS % 256)
+
+    def TurnOnDisplay(self):
+        self.send_command(0x12)  # DISPLAY_REFRESH
+        self.send_data(0X00)
+        self.ReadBusy()
+
+    def init(self):
+        if (epdconfig.module_init() != 0):
+            return -1
+        # EPD hardware init start
+
+        self.reset()
+
+        self.ReadBusy()
+        self.send_command(0x4D)
+        self.send_data(0x78)
+
+        self.send_command(0x00)
+        self.send_data(0x0F)
+        self.send_data(0x29)
+
+        self.send_command(0x01)
+        self.send_data(0x07)
+        self.send_data(0x00)
+
+        self.send_command(0x03)
+        self.send_data(0x10)
+        self.send_data(0x54)
+        self.send_data(0x44)
+
+        self.send_command(0x06)
+        self.send_data(0x05)
+        self.send_data(0x00)
+        self.send_data(0x3F)
+        self.send_data(0x0A)
+        self.send_data(0x25)
+        self.send_data(0x12)
+        self.send_data(0x1A)
+
+        self.send_command(0x50)
+        self.send_data(0x37)
+
+        self.send_command(0x60)
+        self.send_data(0x02)
+        self.send_data(0x02)
+
+        self.SetWindow()
+
+        self.send_command(0xE7)
+        self.send_data(0x1C)
+
+        self.send_command(0xE3)
+        self.send_data(0x22)
+
+        self.send_command(0xB4)
+        self.send_data(0xD0)
+        self.send_command(0xB5)
+        self.send_data(0x03)
+
+        self.send_command(0xE9)
+        self.send_data(0x01)
+
+        self.send_command(0x30)
+        self.send_data(0x08)
+
+        self.send_command(0x04)
+        self.ReadBusy()
+        return 0
+
+    def getbuffer(self, image):
+        # Create a pallette with the 4 colors supported by the panel
+        pal_image = Image.new("P", (1, 1))
+        pal_image.putpalette((0, 0, 0, 255, 255, 255, 255, 255, 0, 255, 0, 0) + (0, 0, 0) * 252)
+
+        # Check if we need to rotate the image
+        imwidth, imheight = image.size
+        if (imwidth == self.width and imheight == self.height):
+            image_temp = image
+        elif (imwidth == self.height and imheight == self.width):
+            image_temp = image.rotate(90, expand=True)
+        else:
+            logger.warning(
+                "Invalid image dimensions: %d x %d, expected %d x %d" % (imwidth, imheight, self.width, self.height))
+
+        # Convert the soruce image to the 4 colors, dithering if needed
+        image_4color = image_temp.convert("RGB").quantize(palette=pal_image)
+        buf_4color = bytearray(image_4color.tobytes('raw'))
+
+        # into a single byte to transfer to the panel
+        if self.width % 4 == 0:
+            Width = self.width // 4
+        else:
+            Width = self.width // 4 + 1
+        Height = self.height
+        buf = [0x00] * int(Width * Height)
+        idx = 0
+        for j in range(0, Height):
+            for i in range(0, Width):
+                if i == Width - 1:
+                    buf[i + j * Width] = (buf_4color[idx] << 6) + (buf_4color[idx + 1] << 4)
+                    idx = idx + 2
+                else:
+                    buf[i + j * Width] = (buf_4color[idx] << 6) + (buf_4color[idx + 1] << 4) + (
+                                buf_4color[idx + 2] << 2) + buf_4color[idx + 3]
+                    idx = idx + 4
+        return buf
+
+    def display(self, image):
+        if self.width % 4 == 0:
+            Width = self.width // 4
+        else:
+            Width = self.width // 4 + 1
+        Height = self.height
+
+        self.send_command(0x10)
+        for j in range(0, Height):
+            for i in range(0, self.Source_BITS // 4):
+                if i < 31:
+                    self.send_data(image[i + j * Width])
+                else:
+                    self.send_data(0x00)
+
+        self.TurnOnDisplay()
+
+    def Clear(self, color=0x55):
+        Width = self.Source_BITS // 4
+        Height = self.height
+
+        self.send_command(0x10)
+        for j in range(0, Height):
+            for i in range(0, Width):
+                self.send_data(color)
+        self.TurnOnDisplay()
+
+    def sleep(self):
+        self.send_command(0x02)  # POWER_OFF
+        self.ReadBusy()
+        epdconfig.delay_ms(100)
+
+        self.send_command(0x07)  # DEEP_SLEEP
+        self.send_data(0XA5)
+
+        epdconfig.delay_ms(2000)
+        epdconfig.module_exit()
+### END OF FILE ###

pwnagotchi/ui/hw/waveshare13in3k.py

@@ -38,7 +38,8 @@ class Waveshare13in3k(DisplayImpl):
         self._display.Clear()
 
     def render(self, canvas):
-        self._display.display(canvas)
+        buf = self._display.getbuffer(canvas)
+        self._display.display(buf)
 
     def clear(self):
         self._display.Clear()

pwnagotchi/ui/hw/waveshare1in02.py

@@ -38,7 +38,8 @@ class Waveshare1in02(DisplayImpl):
         self._display.Clear()
 
     def render(self, canvas):
-        self._display.display(canvas)
+        buf = self._display.getbuffer(canvas)
+        self._display.display(buf)
 
     def clear(self):
         self._display.Clear()

pwnagotchi/ui/hw/waveshare1in54.py

@@ -34,12 +34,12 @@ class Waveshare154(DisplayImpl):
         logging.info("initializing waveshare v1in54 display")
         from pwnagotchi.ui.hw.libs.waveshare.v1in54.epd1in54 import EPD
         self._display = EPD()
-        self._display.init(0x00)
+        self._display.init(self._display.lut_partial_update)
         self._display.Clear()
 
     def render(self, canvas):
         buf = self._display.getbuffer(canvas)
-        self._display.display(buf, None)
+        self._display.display(buf)
 
     def clear(self):
         # pass

pwnagotchi/ui/hw/waveshare1in54_V2.py

@@ -31,15 +31,27 @@ class Waveshare154V2(DisplayImpl):
         return self._layout
 
     def initialize(self):
-        logging.info("initializing waveshare v1in54_v2 display")
+        logging.info("initializing waveshare1in54_v2 display")
         from pwnagotchi.ui.hw.libs.waveshare.v1in54_v2.epd1in54_V2 import EPD
+        try:
+            # Double initialization is a workaround for the display not working after a reboot, or mirrored/flipped screen
             self._display = EPD()
-        self._display.init(False)
+            self._display.init(0)
-        self._display.Clear()
+            self.clear()
+            self._display.init(1)
+            self.clear()
+        except Exception as e:
+            logging.error(f"failed to initialize waveshare1in54_v2 display: {e}")
 
     def render(self, canvas):
+        try:
             buf = self._display.getbuffer(canvas)
-        self._display.display(buf, None)
+            self._display.displayPart(buf)
+        except Exception as e:
+            logging.error(f"failed to render to waveshare1in54_v2 display: {e}")
 
     def clear(self):
-        self._display.Clear()
+        try:
+            self._display.Clear(0xFF)
+        except Exception as e:
+            logging.error(f"failed to clear waveshare1in54_v2 display: {e}")

pwnagotchi/ui/hw/waveshare1in54c.py

@@ -38,7 +38,8 @@ class Waveshare1in54c(DisplayImpl):
         self._display.Clear()
 
     def render(self, canvas):
-        self._display.display(canvas)
+        buf = self._display.getbuffer(canvas)
+        self._display.display(buf, None)
 
     def clear(self):
         self._display.Clear()

pwnagotchi/ui/hw/waveshare1in64g.py

@@ -38,7 +38,8 @@ class Waveshare1in64g(DisplayImpl):
         self._display.Clear()
 
     def render(self, canvas):
-        self._display.display(canvas)
+        buf = self._display.getbuffer(canvas)
+        self._display.display(buf)
 
     def clear(self):
         self._display.Clear()

pwnagotchi/ui/hw/waveshare2in13.py

@@ -9,8 +9,7 @@ class WaveshareV1(DisplayImpl):
         super(WaveshareV1, self).__init__(config, 'waveshare_1')
 
     def layout(self):
-        if self.config['color'] == 'black':
+        fonts.setup(10, 8, 10, 35, 25, 9)
-            fonts.setup(10, 9, 10, 35, 25, 9)
         self._layout['width'] = 250
         self._layout['height'] = 122
         self._layout['face'] = (0, 40)
@@ -29,61 +28,19 @@ class WaveshareV1(DisplayImpl):
             'font': fonts.status_font(fonts.Medium),
             'max': 20
         }
-        else:
-            fonts.setup(10, 8, 10, 25, 25, 9)
-            self._layout['width'] = 212
-            self._layout['height'] = 104
-            self._layout['face'] = (0, 26)
-            self._layout['name'] = (5, 15)
-            self._layout['channel'] = (0, 0)
-            self._layout['aps'] = (28, 0)
-            self._layout['uptime'] = (147, 0)
-            self._layout['line1'] = [0, 12, 212, 12]
-            self._layout['line2'] = [0, 92, 212, 92]
-            self._layout['friend_face'] = (0, 76)
-            self._layout['friend_name'] = (40, 78)
-            self._layout['shakes'] = (0, 93)
-            self._layout['mode'] = (187, 93)
-            self._layout['status'] = {
-                'pos': (91, 15),
-                'font': fonts.status_font(fonts.Medium),
-                'max': 20
-            }
         return self._layout
 
     def initialize(self):
-        if self.config['color'] == 'black':
         logging.info("initializing waveshare v2in13_V1 display in monochromatic mode")
         from pwnagotchi.ui.hw.libs.waveshare.v2in13_V1.epd2in13 import EPD
         self._display = EPD()
         self._display.init(self._display.lut_full_update)
         self._display.Clear(0xFF)
         self._display.init(self._display.lut_partial_update)
-        elif self.config['color'] == 'fastAndFurious':
-            logging.info("initializing waveshare v2in13_V1 3-color display in FAST MODE")
-            logging.info("THIS MAY BE POTENTIALLY DANGEROUS. NO WARRANTY IS PROVIDED")
-            logging.info("USE THIS DISPLAY IN THIS MODE AT YOUR OWN RISK")
-            from pwnagotchi.ui.hw.libs.waveshare.v2in13_V1.epd2in13bcFAST import EPD
-            self._display = EPD()
-            self._display.init()
-            self._display.Clear()
-        else:
-            logging.info("initializing waveshare v2in13_V1 display 3-color mode")
-            from pwnagotchi.ui.hw.libs.waveshare.v2in13_V1.epd2in13bc import EPD
-            self._display = EPD()
-            self._display.init()
-            self._display.Clear()
 
     def render(self, canvas):
-        if self.config['color'] == 'black':
         buf = self._display.getbuffer(canvas)
         self._display.display(buf)
-        elif self.config['color'] == 'fastAndFurious':
-            buf_black = self._display.getbuffer(canvas)
-            self._display.DisplayPartial(buf_black)
-        else:
-            buf_black = self._display.getbuffer(canvas)
-            self._display.displayBlack(buf_black)
 
     def clear(self):
         self._display.Clear(0xff)

pwnagotchi/ui/hw/waveshare2in13_V2.py

@@ -9,8 +9,7 @@ class WaveshareV2(DisplayImpl):
         super(WaveshareV2, self).__init__(config, 'waveshare_2')
 
     def layout(self):
-        if self.config['color'] == 'black':
+        fonts.setup(10, 8, 10, 35, 25, 9)
-            fonts.setup(10, 9, 10, 35, 25, 9)
         self._layout['width'] = 250
         self._layout['height'] = 122
         self._layout['face'] = (0, 40)
@@ -29,27 +28,6 @@ class WaveshareV2(DisplayImpl):
             'font': fonts.status_font(fonts.Medium),
             'max': 20
         }
-        else:
-            fonts.setup(10, 8, 10, 25, 25, 9)
-            self._layout['width'] = 212
-            self._layout['height'] = 104
-            self._layout['face'] = (0, 26)
-            self._layout['name'] = (5, 15)
-            self._layout['channel'] = (0, 0)
-            self._layout['aps'] = (28, 0)
-            self._layout['status'] = (91, 15)
-            self._layout['uptime'] = (147, 0)
-            self._layout['line1'] = [0, 12, 212, 12]
-            self._layout['line2'] = [0, 92, 212, 92]
-            self._layout['friend_face'] = (0, 76)
-            self._layout['friend_name'] = (40, 78)
-            self._layout['shakes'] = (0, 93)
-            self._layout['mode'] = (187, 93)
-            self._layout['status'] = {
-                'pos': (125, 20),
-                'font': fonts.status_font(fonts.Medium),
-                'max': 14
-            }
         return self._layout
 
     def initialize(self):

pwnagotchi/ui/hw/waveshare2in13b_V3.py

@@ -10,7 +10,6 @@ class Waveshare2in13bV3(DisplayImpl):
         super(Waveshare2in13bV3, self).__init__(config, 'waveshare2in13b_v3')
 
     def layout(self):
-        if self.config['color'] == 'black':
         fonts.setup(10, 9, 10, 35, 25, 9)
         self._layout['width'] = 250
         self._layout['height'] = 122
@@ -30,27 +29,6 @@ class Waveshare2in13bV3(DisplayImpl):
             'font': fonts.status_font(fonts.Medium),
             'max': 20
         }
-        else:
-            fonts.setup(10, 8, 10, 25, 25, 9)
-            self._layout['width'] = 212
-            self._layout['height'] = 104
-            self._layout['face'] = (0, 26)
-            self._layout['name'] = (5, 15)
-            self._layout['channel'] = (0, 0)
-            self._layout['aps'] = (28, 0)
-            self._layout['status'] = (91, 15)
-            self._layout['uptime'] = (147, 0)
-            self._layout['line1'] = [0, 12, 212, 12]
-            self._layout['line2'] = [0, 92, 212, 92]
-            self._layout['friend_face'] = (0, 76)
-            self._layout['friend_name'] = (40, 78)
-            self._layout['shakes'] = (0, 93)
-            self._layout['mode'] = (187, 93)
-            self._layout['status'] = {
-                'pos': (125, 20),
-                'font': fonts.status_font(fonts.Medium),
-                'max': 14
-            }
         return self._layout
 
     def initialize(self):

pwnagotchi/ui/hw/waveshare2in13b_V4.py

@@ -10,7 +10,6 @@ class Waveshare213bV4(DisplayImpl):
         super(Waveshare213bV4, self).__init__(config, 'waveshare2in13b_v4')
 
     def layout(self):
-        if self.config['color'] == 'black':
         fonts.setup(10, 9, 10, 35, 25, 9)
         self._layout['width'] = 250
         self._layout['height'] = 122
@@ -30,27 +29,6 @@ class Waveshare213bV4(DisplayImpl):
             'font': fonts.status_font(fonts.Medium),
             'max': 20
         }
-        else:
-            fonts.setup(10, 8, 10, 25, 25, 9)
-            self._layout['width'] = 212
-            self._layout['height'] = 104
-            self._layout['face'] = (0, 26)
-            self._layout['name'] = (5, 15)
-            self._layout['channel'] = (0, 0)
-            self._layout['aps'] = (28, 0)
-            self._layout['status'] = (91, 15)
-            self._layout['uptime'] = (147, 0)
-            self._layout['line1'] = [0, 12, 212, 12]
-            self._layout['line2'] = [0, 92, 212, 92]
-            self._layout['friend_face'] = (0, 76)
-            self._layout['friend_name'] = (40, 78)
-            self._layout['shakes'] = (0, 93)
-            self._layout['mode'] = (187, 93)
-            self._layout['status'] = {
-                'pos': (125, 20),
-                'font': fonts.status_font(fonts.Medium),
-                'max': 14
-            }
         return self._layout
 
     def initialize(self):

pwnagotchi/ui/hw/waveshare2in36g.py

@@ -38,7 +38,8 @@ class Waveshare2in36g(DisplayImpl):
         self._display.Clear()
 
     def render(self, canvas):
-        self._display.display(canvas)
+        buf = self._display.getbuffer(canvas)
+        self._display.display(buf)
 
     def clear(self):
         self._display.Clear()

pwnagotchi/ui/hw/waveshare2in66.py

@@ -34,11 +34,12 @@ class Waveshare2in66(DisplayImpl):
         logging.info("initializing waveshare 2.66 inch lcd display")
         from pwnagotchi.ui.hw.libs.waveshare.v2in66.epd2in66 import EPD
         self._display = EPD()
-        self._display.init(0)
+        self._display.init(1)
         self._display.Clear()
 
     def render(self, canvas):
-        self._display.display(canvas)
+        buf = self._display.getbuffer(canvas)
+        self._display.display(buf)
 
     def clear(self):
         self._display.Clear()

pwnagotchi/ui/hw/waveshare2in66g.py

@@ -38,7 +38,8 @@ class Waveshare2in66g(DisplayImpl):
         self._display.Clear()
 
     def render(self, canvas):
-        self._display.display(canvas)
+        buf = self._display.getbuffer(canvas)
+        self._display.display(buf)
 
     def clear(self):
         self._display.Clear()

pwnagotchi/ui/hw/waveshare2in7_V2.py

@@ -35,13 +35,11 @@ class Waveshare27inchV2(DisplayImpl):
         from pwnagotchi.ui.hw.libs.waveshare.v2in7_v2.epd2in7_V2 import EPD
         self._display = EPD()
         self._display.init()
-        # this must have changed by waveshare
-        # remove the 0xFF(Clear(0xFF)) other wise it errors. can't pass oxff and self
         self._display.Clear()
 
     def render(self, canvas):
         buf = self._display.getbuffer(canvas)
-        self._display.display_Partial(buf, 0, 0, 176, 264)
+        self._display.display_Fast(buf)
 
     def clear(self):
         # This line also removes the 0xFF

pwnagotchi/ui/hw/waveshare2in7b.py

@@ -39,7 +39,7 @@ class Waveshare27b(DisplayImpl):
 
     def render(self, canvas):
         buf = self._display.getbuffer(canvas)
-        self._display.display(buf)
+        self._display.display(buf, None)
 
     def clear(self):
         self._display.Clear(0xff)

pwnagotchi/ui/hw/waveshare2in7b_V2.py

@@ -39,7 +39,7 @@ class Waveshare27bV2(DisplayImpl):
 
     def render(self, canvas):
         buf = self._display.getbuffer(canvas)
-        self._display.display(buf)
+        self._display.display(buf, None)
 
     def clear(self):
         self._display.Clear(0xff)

pwnagotchi/ui/hw/waveshare2in9b_V3.py

@@ -35,12 +35,12 @@ class Waveshare29bV3(DisplayImpl):
         from pwnagotchi.ui.hw.libs.waveshare.v2in9b_v3.epd2in9b_V3 import EPD
         self._display = EPD()
         self._display.init()
-        self._display.Clear(0xFF)
+        self._display.Clear()
         self._display.init()
 
     def render(self, canvas):
         buf = self._display.getbuffer(canvas)
-        self._display.display(buf)
+        self._display.display(buf, None)
 
     def clear(self):
-        self._display.Clear(0xFF)
+        self._display.Clear()

pwnagotchi/ui/hw/waveshare2in9b_V4.py

@@ -35,12 +35,12 @@ class Waveshare29bV4(DisplayImpl):
         from pwnagotchi.ui.hw.libs.waveshare.v2in9b_v4.epd2in9b_V4 import EPD
         self._display = EPD()
         self._display.init()
-        self._display.Clear(0xFF)
+        self._display.Clear()
         self._display.init()
 
     def render(self, canvas):
         buf = self._display.getbuffer(canvas)
-        self._display.display(buf)
+        self._display.display(buf, None)
 
     def clear(self):
-        self._display.Clear(0xFF)
+        self._display.Clear()

pwnagotchi/ui/hw/waveshare2in9bc.py

@@ -38,7 +38,8 @@ class Waveshare2in9bc(DisplayImpl):
         self._display.Clear()
 
     def render(self, canvas):
-        self._display.display(canvas)
+        buf = self._display.getbuffer(canvas)
+        self._display.display(buf, None)
 
     def clear(self):
         self._display.Clear()