revert back to drschottky

This reverts commit 26913016b9.

.github/FUNDING.yml

@@ -1,4 +1,3 @@
 # These are supported funding model platforms
 
-patreon: pwnagotchi_torch
 github: jayofelony

.github/workflows/publish.yml

@@ -0,0 +1,212 @@
+name: Publish
+
+on:
+  workflow_dispatch:
+    inputs:
+      version:
+        description: 'Version number'
+        required: true
+
+jobs:
+ 
+  publish:
+    runs-on: ubuntu-latest
+    steps:
+
+    - name: Remove unnecessary directories
+      run: |
+        sudo rm -rf /usr/share/dotnet
+        sudo rm -rf /opt/ghc
+        sudo rm -rf /usr/local/share/boost
+        sudo rm -rf "$AGENT_TOOLSDIRECTORY"
+
+    - name: Check disk space
+      run: df -BG
+
+    - name: Checkout code
+      uses: actions/checkout@v4
+
+    - name: Validate tag
+      id: tag-setter
+      run: |
+            TAG=${{ github.event.inputs.version }}
+            if [[ $TAG =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
+            echo "Tag $TAG is valid."
+            echo "TAG=$TAG" >> $GITHUB_OUTPUT
+            else
+            echo "Tag $TAG is not a valid semantic version. Aborting."
+            exit 1
+            fi
+
+    - name: Set up Python
+      uses: actions/setup-python@v5
+      with:
+        python-version: 3.9
+
+    - name: Install dependencies
+      run: | 
+           sudo apt-get update && sudo apt-get install -y libdbus-1-dev curl unzip gettext qemu-utils qemu qemu-user-static binfmt-support
+           pip install -r requirements.txt
+
+    - name: Update QEMU
+      run: |
+            sudo update-binfmts --enable qemu-aarch64
+            echo $(ls /usr/bin/qemu-aarch64-static)
+
+    - name: Restart binfmt-support
+      run: sudo service binfmt-support restart
+
+    - name: Mount binfmt_misc
+      run: |
+        if ! grep -qs '/proc/sys/fs/binfmt_misc ' /proc/mounts; then
+          echo "Mounting binfmt_misc"
+          sudo mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc
+        fi
+
+    - name: Restart binfmt-support
+      run: sudo service binfmt-support restart
+        
+    - name: Update Languages
+      run: make update_langs
+    
+    - name: Compile Languages
+      run: make compile_langs
+
+    - name: Check disk space
+      run: df -BG
+
+    - name: Check qemu-user-static package
+      run: |
+        echo "Checking qemu-user-static package..."
+        dpkg -s qemu-user-static && echo "qemu-user-static is installed." || echo "qemu-user-static is NOT installed."
+    
+    - name: Check binfmt-support service
+      run: |
+        echo "Checking binfmt-support service..."
+        service binfmt-support status && echo "binfmt-support service is running." || echo "binfmt-support service is NOT running."
+    
+    - name: Check binfmt_misc filesystem
+      run: |
+        echo "Checking binfmt_misc filesystem..."
+        mount | grep binfmt_misc && echo "binfmt_misc is mounted." || echo "binfmt_misc is NOT mounted."
+        echo $(ls /proc/sys/fs/binfmt_misc | grep qemu-aarch64)
+
+    - name: Run Makefile
+      run: make
+      env: 
+        PWN_VERSION: ${{ steps.tag-setter.outputs.TAG }}
+
+    - name: PiShrink
+      run: |
+        wget https://raw.githubusercontent.com/Drewsif/PiShrink/master/pishrink.sh
+        chmod +x pishrink.sh
+        sudo mv pishrink.sh /usr/local/bin
+        find /home/runner/work/ -type f -name "*.img" -exec sudo pishrink.sh {} \;
+
+    - name: Compress .img files
+      run: |
+         find /home/runner/work/ -type f -name "*.img" -exec xz --no-warn {} \;
+    
+    - name: Create tag
+      uses: actions/github-script@v7
+      with:
+        script: |
+            const version = "${{ steps.tag-setter.outputs.TAG }}"
+            console.log(`Creating tag ${version}`)
+            await github.rest.git.createRef({
+              owner: context.repo.owner,
+              repo: context.repo.repo,
+              ref: `refs/tags/${version}`,
+              sha: context.sha
+            })
+
+    - name: Create Release
+      id: create_release
+      uses: actions/github-script@v7
+      with:
+        script: |
+          const tag = "${{ steps.tag-setter.outputs.TAG }}"
+          console.log(`Creating release with tag: ${tag}`)
+          const release = await github.rest.repos.createRelease({
+            owner: context.repo.owner,
+            repo: context.repo.repo,
+            tag_name: tag,
+            name: tag,
+            draft: false,
+            prerelease: true,
+            generate_release_notes: true
+          })
+          console.log(`Created release with id: ${release.data.id}`)
+          return release.data.id
+
+    - name: Upload Release Asset
+      id: upload-release-asset 
+      uses: actions/github-script@v7
+      env:
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+      with:
+        script: |
+          const fs = require('fs');
+          const path = require('path');
+          const release_id = "${{ steps.create_release.outputs.result }}";
+          const asset_content_type = 'application/octet-stream';
+          const distDir = '/home/runner/work/';
+          
+          const uploadFile = async (filePath) => {
+            if (fs.lstatSync(filePath).isDirectory()) {
+              const files = fs.readdirSync(filePath);
+              for (const file of files) {
+                await uploadFile(path.join(filePath, file));
+              }
+            } else {
+              // Check if the file has a .xz extension
+              if (path.extname(filePath) === '.xz') {
+                console.log(`Uploading ${filePath}...`);
+      
+                const asset_name = path.basename(filePath);
+                const asset_size = fs.statSync(filePath).size;
+                const asset = fs.createReadStream(filePath);
+      
+                const response = await github.rest.repos.uploadReleaseAsset({
+                  owner: context.repo.owner,
+                  repo: context.repo.repo,
+                  release_id: release_id,
+                  name: asset_name,
+                  data: asset,
+                  headers: {
+                    'content-type': asset_content_type,
+                    'content-length': asset_size
+                  }
+                });
+      
+                console.log(`Uploaded ${filePath}: ${response.data.browser_download_url}`);
+              }
+            }
+          }
+      
+          await uploadFile(distDir);
+          
+    - name: Update Release
+      uses: actions/github-script@v7
+      with:
+        script: |
+          const release_id = "${{ steps.create_release.outputs.result }}"
+          console.log(`Updating release with id: ${release_id}`)
+          github.rest.repos.updateRelease({
+            owner: context.repo.owner,
+            repo: context.repo.repo,
+            release_id: release_id,
+            tag_name: "${{ steps.tag-setter.outputs.TAG }}",
+            name: "${{ steps.tag-setter.outputs.TAG }}",
+            draft: false,
+            prerelease: false
+          })
+
+    - name: Save environment variable
+      run: echo "${{ steps.tag-setter.outputs.TAG }}"  > env_var.txt
+
+    - name: Upload artifact
+      uses: actions/upload-artifact@v4
+      with:
+        name: env-var
+        path: env_var.txt

.idea/deployment.xml

@@ -1,4 +1,23 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <project version="4">
-  <component name="PublishConfigData" filePermissions="493" folderPermissions="493" remoteFilesAllowedToDisappearOnAutoupload="false" />
+  <component name="PublishConfigData" serverName="pwnagotchi" filePermissions="493" folderPermissions="493" remoteFilesAllowedToDisappearOnAutoupload="false" confirmBeforeUploading="false">
+    <option name="confirmBeforeUploading" value="false" />
+    <serverData>
+      <paths name="pwnagotchi">
+        <serverdata>
+          <mappings>
+            <mapping deploy="/usr/local/lib/python3.11/dist-packages/pwnagotchi" local="$PROJECT_DIR$/pwnagotchi" web="/" />
+            <mapping deploy="/usr/local/bin" local="$PROJECT_DIR$/bin" />
+            <mapping local="" />
+          </mappings>
+          <excludedPaths>
+            <excludedPath local="true" path="$PROJECT_DIR$/venv" />
+            <excludedPath local="true" path="$PROJECT_DIR$/pwnagotchi.egg-info" />
+            <excludedPath local="true" path="$PROJECT_DIR$/dist" />
+            <excludedPath local="true" path="$PROJECT_DIR$/builder/packer-builder-arm" />
+          </excludedPaths>
+        </serverdata>
+      </paths>
+    </serverData>
+  </component>
 </project>

.idea/misc.xml

@@ -3,7 +3,7 @@
   <component name="Black">
     <option name="sdkName" value="Python 3.11 (pwnagotchi)" />
   </component>
-  <component name="ProjectRootManager" version="2" project-jdk-name="Python 3.10 (pwnagotchi-torch-bookworm)" project-jdk-type="Python SDK" />
+  <component name="ProjectRootManager" version="2" project-jdk-name="Python 3.10" project-jdk-type="Python SDK" />
   <component name="PythonCompatibilityInspectionAdvertiser">
     <option name="version" value="3" />
   </component>

.idea/pwnagotchi.iml

@@ -4,7 +4,7 @@
     <content url="file://$MODULE_DIR$">
       <excludeFolder url="file://$MODULE_DIR$/venv" />
     </content>
-    <orderEntry type="jdk" jdkName="Python 3.10 (pwnagotchi-torch-bookworm)" jdkType="Python SDK" />
+    <orderEntry type="jdk" jdkName="Python 3.10" jdkType="Python SDK" />
     <orderEntry type="sourceFolder" forTests="false" />
   </component>
   <component name="PyDocumentationSettings">

Makefile

@@ -1,4 +1,4 @@
-PACKER_VERSION := 1.10.0
+PACKER_VERSION := 1.10.1
 PWN_HOSTNAME := pwnagotchi
 PWN_VERSION := $(shell cut -d"'" -f2 < pwnagotchi/_version.py)
 
@@ -64,5 +64,5 @@ pwnagotchi: $(SDIST) builder/pwnagotchi.json.pkr.hcl builder/raspberrypi64.yml $
 image: pwnagotchi
 
 clean:
-	- rm -rf build dist pwnagotchi.egg-info
+	- rm -rf dist pwnagotchi.egg-info
-	- rm -f $(PACKER)
+	- rm -f $(PACKER)

README.md

@@ -1,15 +1,19 @@
 # Pwnagotchi-Torch
 <a href="https://github.com/jayofelony/pwnagotchi-bookworm/releases/latest"><img alt="Release" src="https://img.shields.io/github/release/jayofelony/pwnagotchi-bookworm.svg"></a><br/>
-**This fork of [Pwnagotchi](https://www.pwnagotchi.ai) is only for 64-bit Raspberry Pi's. Such as the 02W, 3(b+) and 4(b) ~~and the new Raspberry Pi 5~~!!.**
+**This fork of [Pwnagotchi](https://www.pwnagotchi.ai) is only for 64-bit Raspberry Pi's. Such as the 02W, 3(b+) and 4(b) and the new Raspberry Pi 5!!.**
+
+The RPi5 can only be used headless currently. (without display.)
 
-It seems the Pi 5 is unable to run in monitor mode, will keep you updated on this.
 
 If you are using an older 32-bit version Raspberry Pi, ZeroWH, use this [fork](https://github.com/jayofelony/pwnagotchi-torch/releases/tag/v2.6.4) and make sure you download the `armhf` version.
 
 ---
-Download latest image file [here](https://github.com/jayofelony/pwnagotchi-bookworm/releases/tag/v2.7.3), and let it auto-update from here on out.
+Download the latest image file [here](https://github.com/jayofelony/pwnagotchi-bookworm/releases/tag/v2.8.2), and let it auto-update from here on out.
 
 **Use RPi imager to flash, please don't flash a new user as this will mess with logs created.**
+  - Select `Use Custom Image`
+  - Browse for the downloaded image file
+  - Select No under `Use OS Customization`
 
 SSH credentials are `pi/raspberry`.
 

apt_packages.txt

@@ -1 +0,0 @@
-hcxtools

bin/pwnagotchi

@@ -50,6 +50,7 @@ def pwnagotchi_cli():
 
         agent.mode = 'auto'
         agent.start()
+        config = agent.config()
 
         while True:
             try:
@@ -59,6 +60,7 @@ def pwnagotchi_cli():
                 channels = agent.get_access_points_by_channel()
                 # for each channel
                 for ch, aps in channels:
+                    time.sleep(0.2)  # This is to make sure it doesn't error (https://github.com/seemoo-lab/nexmon/issues/596)
                     agent.set_channel(ch)
 
                     if not agent.is_stale() and agent.any_activity():
@@ -66,6 +68,9 @@ def pwnagotchi_cli():
 
                     # for each ap on this channel
                     for ap in aps:
+                        if ap['mac'][:13].lower in config['main']['whitelist'] or ap['hostname'] in config['main']['whitelist']:
+                            logging.info(f"Found your MAC address {ap['mac']} - {config['main']['whitelist']}")
+                            continue
                         # send an association frame in order to get for a PMKID
                         agent.associate(ap)
                         # deauth all client stations in order to get a full handshake

builder/data/etc/default/zramswap

@@ -1,15 +0,0 @@
-# Specifies amount of zram devices to create.
-# By default, zramswap-start will use all available cores.
-#CORES=1
-
-# Specifies the amount of RAM that should be used for zram
-# based on a percentage the total amount of available memory
-PERCENTAGE=60
-
-# Specifies a static amount of RAM that should be used for
-# the ZRAM devices, this is in MiB
-#ALLOCATION=256
-
-# Specifies the priority for the swap devices, see swapon(2)
-# for more details.
-#PRIORITY=100

builder/data/etc/dphys-swapfile

@@ -0,0 +1,26 @@
+# /etc/dphys-swapfile - user settings for dphys-swapfile package
+# author Neil Franklin, last modification 2010.05.05
+# copyright ETH Zuerich Physics Departement
+#   use under either modified/non-advertising BSD or GPL license
+
+# this file is sourced with . so full normal sh syntax applies
+
+# the default settings are added as commented out CONF_*=* lines
+
+
+# where we want the swapfile to be, this is the default
+#CONF_SWAPFILE=/var/swap
+
+# set size to absolute value, leaving empty (default) then uses computed value
+#   you most likely don't want this, unless you have an special disk situation
+CONF_SWAPSIZE=2048
+
+# set size to computed value, this times RAM size, dynamically adapts,
+#   guarantees that there is enough swap without wasting disk space on excess
+#CONF_SWAPFACTOR=2
+
+# restrict size (computed and absolute!) to maximally this limit
+#   can be set to empty for no limit, but beware of filled partitions!
+#   this is/was a (outdated?) 32bit kernel limit (in MBytes), do not overrun it
+#   but is also sensible on 64bit to prevent filling /var or even / partition
+#CONF_MAXSWAP=2048

builder/data/etc/network/interfaces.d/usb0-cfg

@@ -5,4 +5,4 @@ iface usb0 inet static
   network 10.0.0.0
   broadcast 10.0.0.255
   gateway 10.0.0.1
-  metric 101
+  metric 101

builder/data/etc/systemd/system/pwnagotchi.service

@@ -1,6 +1,6 @@
 [Unit]
 Description=pwnagotchi Deep Reinforcement Learning instrumenting bettercap for WiFI pwning.
-Documentation=https://pwnagotchi.ai
+Documentation=https://pwnagotchi.org
 Wants=network.target
 After=pwngrid-peer.service
 
@@ -8,6 +8,7 @@ After=pwngrid-peer.service
 Type=simple
 WorkingDirectory=~
 ExecStart=/usr/bin/pwnagotchi-launcher
+ExecStopPost=/usr/bin/bash -c "if egrep -qi  'personality.clear_on_exit[ =]*true' /etc/pwnagotchi/config.toml ; then /usr/local/bin/pwnagotchi --clear; fi"
 Restart=always
 RestartSec=30
 TasksMax=infinity

builder/data/etc/update-motd.d/01-motd

@@ -1,8 +1,8 @@
 #!/bin/sh
 _hostname=$(hostname)
-_version=$(cut -d"'" -f2 < /usr/local/lib/python3.9/dist-packages/pwnagotchi/_version.py)
+_version=$(cut -d"'" -f2 < /usr/local/lib/python3.11/dist-packages/pwnagotchi/_version.py)
 echo
-echo "(◕‿‿◕) $_hostname"
+echo "(☉_☉ ) $_hostname"
 echo
 echo "    Hi! I'm a pwnagotchi $_version, please take good care of me!"
 echo "    Here are some basic things you need to know to raise me properly!"
@@ -30,4 +30,4 @@ echo
 echo "    You can restart me using"
 echo "    pwnkill"
 echo
-echo "    You learn more about me at https://pwnagotchi.ai/"
+echo "    You can learn more about me at https://pwnagotchi.org/"

builder/data/usr/bin/bettercap-launcher

@@ -9,15 +9,6 @@ if is_crypted_mode; then
   done
 fi
 
-# check if wifi driver is bugged
-if ! check_brcm; then
-  if ! reload_brcm; then
-    echo "Could not reload wifi driver. Reboot"
-    reboot
-  fi
-  sleep 10
-fi
-
 # start mon0
 start_monitor_interface
 

builder/data/usr/bin/pwnlib

@@ -13,14 +13,6 @@ blink_led() {
   sleep 0.3
 }
 
-# check if brcm is stuck
-check_brcm() {
-  if [[ "$(journalctl -n10 -k --since -5m | grep -c 'brcmf_cfg80211_nexmon_set_channel.*Set Channel failed')" -ge 5 ]]; then
-    return 1
-  fi
-  return 0
-}
-
 # reload mod
 reload_brcm() {
   if ! modprobe -r brcmfmac; then

builder/pwnagotchi.json.pkr.hcl

@@ -1,11 +1,9 @@
-# This is not working quite yet
-# https://github.com/mkaczanowski/packer-builder-arm/pull/172
 packer {
   required_plugins {
-    #arm = {
+    arm = {
-    #  version = "~> 1"
+      version = "1.0.0"
-    #  source  = "github.com/cdecoux/builder-arm"
+      source  = "github.com/cdecoux/builder-arm"
-    #}
+    }
     ansible = {
       source  = "github.com/hashicorp/ansible"
       version = "~> 1"
@@ -28,8 +26,8 @@ source "arm" "rpi64-pwnagotchi" {
   file_target_extension         = "xz"
   file_unarchive_cmd            = ["unxz", "$ARCHIVE_PATH"]
   image_path                    = "../../../pwnagotchi-rpi-bookworm-${var.pwn_version}-arm64.img"
-  qemu_binary_source_path       = "/usr/bin/qemu-aarch64-static"
+  qemu_binary_source_path       = "/usr/libexec/qemu-binfmt/aarch64-binfmt-P"
-  qemu_binary_destination_path  = "/usr/bin/qemu-aarch64-static"
+  qemu_binary_destination_path  = "/usr/libexec/qemu-binfmt/aarch64-binfmt-P"
   image_build_method            = "resize"
   image_size                    = "9G"
   image_type                    = "dos"
@@ -51,6 +49,8 @@ source "arm" "rpi64-pwnagotchi" {
   }
 }
 
+
+
 # a build block invokes sources and runs provisioning steps on them. The
 # documentation for build blocks can be found here:
 # https://www.packer.io/docs/from-1.5/blocks/build
@@ -82,7 +82,6 @@ build {
       "data/etc/systemd/system/pwngrid-peer.service",
     ]
   }
-
   provisioner "file" {
     destination = "/etc/update-motd.d/01-motd"
     source      = "data/etc/update-motd.d/01-motd"

builder/raspberrypi64.yml

@@ -6,8 +6,8 @@
   vars:
     kernel:
       min: "6.1"
-      full: "6.1.0-rpi7-rpi-v8"
+      full: "6.1.0-rpi8-rpi-v8"
-      full_pi5: "6.1.0-rpi7-rpi-2712"
+      full_pi5: "6.1.0-rpi8-rpi-2712"
     pwnagotchi:
       hostname: "{{ lookup('env', 'PWN_HOSTNAME') | default('pwnagotchi', true) }}"
       version: "{{ lookup('env', 'PWN_VERSION') | default('pwnagotchi-torch', true) }}"
@@ -27,7 +27,6 @@
         - fstrim.timer
         - pwnagotchi.service
         - pwngrid-peer.service
-        - zramswap.service
       disable:
         - apt-daily-upgrade.service
         - apt-daily-upgrade.timer
@@ -52,13 +51,20 @@
           - libpcap0.8-dev_1.9.1-4_arm64.deb
           - libpcap0.8_1.9.1-4_arm64.deb
         hold:
+          - firmware-atheros
+          - firmware-brcm80211
+          - firmware-libertas
+          - firmware-misc-nonfree
+          - firmware-realtek
           - libpcap-dev
           - libpcap0.8
-          - libpcap0.8-dev
           - libpcap0.8-dbg
+          - libpcap0.8-dev
         remove:
           - avahi-daemon
           - dhpys-swapfile
+          - libcurl-ocaml-dev
+          - libssl-ocaml-dev
           - nfs-common
           - triggerhappy
           - wpasupplicant
@@ -71,7 +77,13 @@
           - build-essential
           - curl
           - dkms
+          - dphys-swapfile
           - fbi
+          - firmware-atheros
+          - firmware-brcm80211
+          - firmware-libertas
+          - firmware-misc-nonfree
+          - firmware-realtek
           - flex
           - fonts-dejavu
           - fonts-dejavu-core
@@ -91,6 +103,7 @@
           - libc-ares-dev
           - libc6-dev
           - libcap-dev
+          - libcurl-ocaml-dev
           - libdbus-1-dev
           - libdbus-glib-1-dev
           - libeigen3-dev
@@ -117,34 +130,30 @@
           - libraspberrypi0
           - libsqlite3-dev
           - libssl-dev
+          - libssl-ocaml-dev
           - libswscale5
           - libtiff6
           - libtool
           - libusb-1.0-0-dev
           - lsof
           - make
-          - python3-yaml
           - python3-dbus
           - python3-flask
           - python3-flask-cors
           - python3-flaskext.wtf
           - python3-gast
           - python3-pil
+          - python3-pip
           - python3-pycryptodome
           - python3-requests
           - python3-scapy
+          - python3-setuptools
+          - python3-smbus
           - python3-smbus2
           - python3-spidev
           - python3-tweepy
           - python3-werkzeug
-          - firmware-atheros
+          - python3-yaml
-          - firmware-brcm80211
-          - firmware-libertas
-          - firmware-misc-nonfree
-          - firmware-realtek
-          - python3-pip
-          - python3-setuptools
-          - python3-smbus
           - qpdf
           - raspberrypi-kernel-headers
           - rsync
@@ -159,13 +168,11 @@
           - wl
           - xxd
           - zlib1g-dev
-          - zram-tools
   environment:
     ARCHFLAGS: "-arch aarch64"
-    QEMU_UNAME: "{{ kernel.full }}"
+    
-
   tasks:
-    # First we install and remove unnecessary packages
+    # First we install packages
     - name: install packages
       apt:
         name: "{{ packages.apt.install }}"
@@ -173,13 +180,6 @@
         update_cache: yes
         install_recommends: false
 
-    - name: remove unnecessary apt packages
-      apt:
-        name: "{{ packages.apt.remove }}"
-        state: absent
-        purge: yes
-      register: removed
-
     # Now we set up /boot/firmware
     - name: Create pi user
       copy:
@@ -273,35 +273,116 @@
         dest: /usr/local/lib/libpcap.so.0.8
         state: link
 
-    # Install nexmon to fix wireless scanning (takes 2.5G of space)
+    # install latest hcxtools
+
+    - name: clone hcxtools
+      git:
+        repo: https://github.com/ZerBea/hcxtools.git
+        dest: /usr/local/src/hcxtools
+
+    - name: install hcxtools
+      shell: "make && make install"
+      args:
+        executable: /bin/bash
+        chdir: /usr/local/src/hcxtools
+
+    - name: remove hcxtools directory
+      file:
+        state: absent
+        path: /usr/local/src/hcxtools
+
     - name: clone nexmon repository
       git:
         repo: https://github.com/DrSchottky/nexmon.git
         dest: /usr/local/src/nexmon
 
-    - name: make firmware
+    # FIRST WE BUILD DRIVER FOR RPi5
+
+    - name: make firmware, RPi5
       shell: "source ./setup_env.sh && make"
       args:
         executable: /bin/bash
         chdir: /usr/local/src/nexmon/
+      environment:
+        QEMU_UNAME: "{{ kernel.full_pi5 }}"
+        ARCHFLAGS: "-arch aarch64"
 
-    - name: make firmware patch (bcm43455c0)
+    - name: make firmware patch (bcm43455c0), RPi5
       shell: "source ./setup_env.sh && cd /usr/local/src/nexmon/patches/bcm43455c0/7_45_206/nexmon/ && make"
       args:
         executable: /bin/bash
         chdir: /usr/local/src/nexmon/
+      environment:
+        QEMU_UNAME: "{{ kernel.full_pi5 }}"
+        ARCHFLAGS: "-arch aarch64"
 
-    - name: install new firmware (bcm43455c0)
+    - name: copy modified driver, RPi5
+      copy:
+        src: "/usr/local/src/nexmon/patches/driver/brcmfmac_{{ kernel.min }}.y-nexmon/brcmfmac.ko"
+        dest: "/usr/lib/modules/{{ kernel.full_pi5 }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko"
+      environment:
+        QEMU_UNAME: "{{ kernel.full_pi5 }}"
+        ARCHFLAGS: "-arch aarch64"
+
+    - name: Delete the modified driver, RPi5
+      file:
+        state: absent
+        path: '/usr/local/src/nexmon/patches/driver/brcmfmac_{{ kernel.min }}.y-nexmon/brcmfmac.ko'
+
+    - name: backup original driver, RPi5
+      command: "mv /usr/lib/modules/{{ kernel.full_pi5 }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko.xz /usr/lib/modules/{{ kernel.full_pi5 }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko.xz.orig"
+
+    - name: load brcmfmac drivers
+      command: "/sbin/depmod {{ kernel.full_pi5 }}"
+      environment:
+        QEMU_UNAME: "{{ kernel.full_pi5 }}"
+
+    - name: Delete nexmon content & directory
+      file:
+        state: absent
+        path: /usr/local/src/nexmon/
+
+    # NOW WE BUILD DRIVERS FOR RPi4, RPizero2w and RPi3
+
+    - name: clone nexmon repository
+      git:
+        repo: https://github.com/DrSchottky/nexmon.git
+        dest: /usr/local/src/nexmon
+
+    - name: make firmware, RPi4
+      shell: "source ./setup_env.sh && make"
+      args:
+        executable: /bin/bash
+        chdir: /usr/local/src/nexmon/
+      environment:
+        QEMU_UNAME: "{{ kernel.full }}"
+        ARCHFLAGS: "-arch aarch64"
+
+    - name: make firmware patch (bcm43455c0), RPi4
+      shell: "source ./setup_env.sh && cd /usr/local/src/nexmon/patches/bcm43455c0/7_45_206/nexmon/ && make"
+      args:
+        executable: /bin/bash
+        chdir: /usr/local/src/nexmon/
+      environment:
+        QEMU_UNAME: "{{ kernel.full }}"
+        ARCHFLAGS: "-arch aarch64"
+
+    - name: install new firmware (bcm43455c0), RPi4 RPi5
       copy:
         src: /usr/local/src/nexmon/patches/bcm43455c0/7_45_206/nexmon/brcmfmac43455-sdio.bin
         dest: /usr/lib/firmware/brcm/brcmfmac43455-sdio.bin
         follow: true
 
+    # NOW WE BUILD DRIVERS FOR RPiZero2W, RPi 3
+
     - name: make firmware patch (bcm43436b0)
       shell: "source ./setup_env.sh && cd /usr/local/src/nexmon/patches/bcm43436b0/9_88_4_65/nexmon/ && make"
       args:
         executable: /bin/bash
         chdir: /usr/local/src/nexmon/
+      environment:
+        QEMU_UNAME: "{{ kernel.full }}"
+        ARCHFLAGS: "-arch aarch64"
 
     - name: install new firmware (bcm43436b0)
       copy:
@@ -314,6 +395,17 @@
       args:
         executable: /bin/bash
         chdir: /usr/local/src/nexmon/
+      environment:
+        QEMU_UNAME: "{{ kernel.full }}"
+        ARCHFLAGS: "-arch aarch64"
+
+    - name: copy modified driver, RPi4
+      copy:
+        src: "/usr/local/src/nexmon/patches/driver/brcmfmac_{{ kernel.min }}.y-nexmon/brcmfmac.ko"
+        dest: "/usr/lib/modules/{{ kernel.full }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko"
+      environment:
+        QEMU_UNAME: "{{ kernel.full }}"
+        ARCHFLAGS: "-arch aarch64"
 
     - name: install new firmware (bcm43430a1)
       copy:
@@ -344,21 +436,10 @@
     - name: backup original driver
       command: "mv /usr/lib/modules/{{ kernel.full }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko.xz /usr/lib/modules/{{ kernel.full }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko.xz.orig"
 
-    - name: backup original driver, RPi5
+    - name: load brcmfmac drivers
-      command: "mv /usr/lib/modules/{{ kernel.full_pi5 }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko.xz /usr/lib/modules/{{ kernel.full_pi5 }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko.xz.orig"
+      command: "/sbin/depmod {{ kernel.full }}"
-
+      environment:
-    - name: copy modified driver
+        QEMU_UNAME: "{{ kernel.full }}"
-      copy:
-        src: "/usr/local/src/nexmon/patches/driver/brcmfmac_{{ kernel.min }}.y-nexmon/brcmfmac.ko"
-        dest: "/usr/lib/modules/{{ kernel.full }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko"
-
-    - name: copy modified driver, RPi5
-      copy:
-        src: "/usr/local/src/nexmon/patches/driver/brcmfmac_{{ kernel.min }}.y-nexmon/brcmfmac.ko"
-        dest: "/usr/lib/modules/{{ kernel.full_pi5 }}/kernel/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko"
-
-    - name : load brcmfmac drivers
-      command: "/sbin/depmod -a"
 
     # To shrink the final image, remove the nexmon directory (takes 2.5G of space) post build and installation
     - name: Delete nexmon content & directory
@@ -567,11 +648,6 @@
         group: pi
         recurse: true
 
-    - name: clean apt cache
-      apt:
-        autoclean: true
-      when: removed.changed
-
     - name: remove pre-collected packages zip
       file:
         path: /root/go_pkgs.tgz
@@ -592,11 +668,6 @@
         state: absent
         path: /root/.cache/pip
 
-    - name: remove dependencies that are no longer required
-      apt:
-        autoremove: yes
-      when: removed.changed
-
     - name: remove ssh keys
       file:
         state: absent
@@ -609,6 +680,24 @@
       args:
         executable: /bin/bash
 
+    # Now we remove packages
+    - name: remove unnecessary apt packages
+      apt:
+        name: "{{ packages.apt.remove }}"
+        state: absent
+        purge: yes
+      register: removed
+
+    - name: remove dependencies that are no longer required
+      apt:
+        autoremove: yes
+      when: removed.changed
+
+    - name: clean apt cache
+      apt:
+        autoclean: true
+      when: removed.changed
+
   handlers:
     - name: reload systemd services
       systemd:

pwnagotchi/_version.py

@@ -1 +1 @@
-__version__ = '2.7.7'
+__version__ = '2.8.3'

pwnagotchi/agent.py

@@ -21,17 +21,17 @@ RECOVERY_DATA_FILE = '/root/.pwnagotchi-recovery'
 
 class Agent(Client, Automata, AsyncAdvertiser, AsyncTrainer):
     def __init__(self, view, config, keypair):
-        Client.__init__(self, config['bettercap']['hostname'],
+        Client.__init__(self,
-                        config['bettercap']['scheme'],
+                        "127.0.0.1" if "hostname" not in config['bettercap'] else config['bettercap']['hostname'],
-                        config['bettercap']['port'],
+                        "http" if "scheme" not in config['bettercap'] else config['bettercap']['scheme'],
-                        config['bettercap']['username'],
+                        8081 if "port" not in config['bettercap'] else config['bettercap']['port'],
-                        config['bettercap']['password'])
+                        "pwnagotchi" if "username" not in config['bettercap'] else config['bettercap']['username'],
+                        "pwnagotchi" if "password" not in config['bettercap'] else config['bettercap']['password'])
         Automata.__init__(self, config, view)
         AsyncAdvertiser.__init__(self, config, view, keypair)
         AsyncTrainer.__init__(self, config)
 
         self._started_at = time.time()
-        self._filter = None if not config['main']['filter'] else re.compile(config['main']['filter'])
         self._current_channel = 0
         self._tot_aps = 0
         self._aps_on_channel = 0
@@ -164,11 +164,6 @@ class Agent(Client, Automata, AsyncAdvertiser, AsyncTrainer):
 
         self.wait_for(recon_time, sleeping=False)
 
-    def _filter_included(self, ap):
-        return self._filter is None or \
-            self._filter.match(ap['hostname']) is not None or \
-            self._filter.match(ap['mac']) is not None
-
     def set_access_points(self, aps):
         self._access_points = aps
         plugins.on('wifi_update', self, aps)
@@ -184,13 +179,10 @@ class Agent(Client, Automata, AsyncAdvertiser, AsyncTrainer):
             for ap in s['wifi']['aps']:
                 if ap['encryption'] == '' or ap['encryption'] == 'OPEN':
                     continue
-                elif ap['hostname'] in whitelist or ap['mac'][:8].lower() in whitelist:
+                elif ap['hostname'] in whitelist or ap['mac'][:13].lower() in whitelist or ap['mac'].lower() in whitelist:
                     continue
-                elif ap['hostname'] not in whitelist \
+                else:
-                        and ap['mac'].lower() not in whitelist \
+                    aps.append(ap)
-                        and ap['mac'][:8].lower() not in whitelist:
-                    if self._filter_included(ap):
-                        aps.append(ap)
         except Exception as e:
             logging.exception("Error while getting access points (%s)", e)
 
@@ -433,7 +425,6 @@ class Agent(Client, Automata, AsyncAdvertiser, AsyncTrainer):
         if self.is_stale():
             logging.debug("recon is stale, skipping assoc(%s)", ap['mac'])
             return
-
         if throttle == -1 and "throttle_a" in self._config['personality']:
             throttle = self._config['personality']['throttle_a']
 

pwnagotchi/defaults.toml

@@ -156,6 +156,8 @@ personality.bond_encounters_factor = 20000
 personality.throttle_a = 0.4
 personality.throttle_d = 0.9
 
+personality.clear_on_exit = true # clear display when shutting down cleanly
+
 ui.fps = 0.0
 ui.font.name = "DejaVuSansMono" # for japanese: fonts-japanese-gothic
 ui.font.size_offset = 0 # will be added to the font size
@@ -198,11 +200,6 @@ ui.display.enabled = false
 ui.display.rotation = 180
 ui.display.type = "waveshare_4"
 
-bettercap.scheme = "http"
-bettercap.hostname = "localhost"
-bettercap.port = 8081
-bettercap.username = "pwnagotchi"
-bettercap.password = "pwnagotchi"
 bettercap.handshakes = "/root/handshakes"
 bettercap.silence = [
     "ble.device.new",

pwnagotchi/locale/eo/LC_MESSAGES/voice.po

@@ -1,14 +1,13 @@
-# SOME DESCRIPTIVE TITLE.
+# Pwnagotchi display English to Esperanto.
 # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
 # This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+# FIRST AUTHOR MADE THIS IN YEAR 2024.
 #
-
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-16 21:10+0100\n"
+"POT-Creation-Date: 2024-01-25 23:40+0100\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -18,218 +17,219 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 
 msgid "ZzzzZZzzzzZzzz"
-msgstr ""
+msgstr "ZzzzZZzzzzZzzz"
 
 msgid "Hi, I'm Pwnagotchi! Starting ..."
-msgstr ""
+msgstr "Sal, mi estas Pwnagotchi! Komencante…"
 
 msgid "New day, new hunt, new pwns!"
-msgstr ""
+msgstr "Nova tago, nova ĉaso, nova wifi!"
 
 msgid "Hack the Planet!"
-msgstr ""
+msgstr "Eniru la elektronikon!"
 
 msgid "AI ready."
-msgstr ""
+msgstr "Mi pretas."
 
 msgid "The neural network is ready."
-msgstr ""
+msgstr "La elektronika reto estas preta."
 
 msgid "Generating keys, do not turn off ..."
-msgstr ""
+msgstr "Mi generas ŝlosilojn, ne malŝaltu min!"
 
 #, python-brace-format
 msgid "Hey, channel {channel} is free! Your AP will say thanks."
-msgstr ""
+msgstr "Hej, kanalo {channel} disponeblas! Via alirpunkto dankos vin"
 
 msgid "Reading last session logs ..."
-msgstr ""
+msgstr "Legante protokolojn de antaŭa sesio…"
 
 #, python-brace-format
 msgid "Read {lines_so_far} log lines so far ..."
-msgstr ""
+msgstr "legi {lines_so_far} liniojn ĝis nun…"
 
 msgid "I'm bored ..."
-msgstr ""
+msgstr "Mi enuas…"
 
 msgid "Let's go for a walk!"
-msgstr ""
+msgstr "Ni iru promeni!"
 
 msgid "This is the best day of my life!"
-msgstr ""
+msgstr "Plej bona tago de mia vivo!"
 
 msgid "Shitty day :/"
-msgstr ""
+msgstr "Terura tago :/"
 
 msgid "I'm extremely bored ..."
-msgstr ""
+msgstr "mi estas tre enuigita…"
 
 msgid "I'm very sad ..."
-msgstr ""
+msgstr "Mi estas tre malĝoja…"
 
 msgid "I'm sad"
-msgstr ""
+msgstr "Mi estas malfeliĉa"
 
 msgid "Leave me alone ..."
-msgstr ""
+msgstr "Lasu min sola…"
 
 msgid "I'm mad at you!"
-msgstr ""
+msgstr "Mi koleras kontraŭ vi!"
 
 msgid "I'm living the life!"
-msgstr ""
+msgstr "Mi ĝuas la vivon!"
 
 msgid "I pwn therefore I am."
-msgstr ""
+msgstr "Mi eniras tial mi estas."
 
 msgid "So many networks!!!"
-msgstr ""
+msgstr "Tiom da ludiloj!"
 
 msgid "I'm having so much fun!"
-msgstr ""
+msgstr "Mi tre amuzas!"
 
 msgid "My crime is that of curiosity ..."
-msgstr ""
+msgstr "Scivolemo estas mia krimo…"
 
 #, python-brace-format
 msgid "Hello {name}! Nice to meet you."
-msgstr ""
+msgstr "Sal {name}! Mi ĝojas renkonti vin."
 
 #, python-brace-format
 msgid "Yo {name}! Sup?"
-msgstr ""
+msgstr "Hej {name}! Sal?"
 
 #, python-brace-format
 msgid "Hey {name} how are you doing?"
-msgstr ""
+msgstr "Sal {name}! Kiel vi fartas?"
 
 #, python-brace-format
 msgid "Unit {name} is nearby!"
-msgstr ""
+msgstr "Iu estas proksime! Ĝia nomo estas {name}."
 
 #, python-brace-format
 msgid "Uhm ... goodbye {name}"
-msgstr ""
+msgstr "Adiaŭ {name}"
 
 #, python-brace-format
 msgid "{name} is gone ..."
-msgstr ""
+msgstr "{name} malaperis…"
 
 #, python-brace-format
 msgid "Whoops ... {name} is gone."
-msgstr ""
+msgstr "Hups… {name} malaperis…"
 
 #, python-brace-format
 msgid "{name} missed!"
-msgstr ""
+msgstr "{name} mankis!"
 
 msgid "Missed!"
-msgstr ""
+msgstr "Maltrafis!"
 
 msgid "Good friends are a blessing!"
-msgstr ""
+msgstr "Bonaj amikoj estas beno!"
 
 msgid "I love my friends!"
-msgstr ""
+msgstr "Mi amas miajn amikojn!"
 
 msgid "Nobody wants to play with me ..."
-msgstr ""
+msgstr "Neniu volas ludi kun mi..."
 
 msgid "I feel so alone ..."
-msgstr ""
+msgstr "Mi estas tiel sola..."
 
 msgid "Where's everybody?!"
-msgstr ""
+msgstr "KIE ĈIUJ ESTAS?!"
 
 #, python-brace-format
 msgid "Napping for {secs}s ..."
-msgstr ""
+msgstr "Dormeto por {sec}j…"
 
 msgid "Zzzzz"
-msgstr ""
+msgstr "Zzzzz"
 
 #, python-brace-format
 msgid "ZzzZzzz ({secs}s)"
-msgstr ""
+msgstr "ZzzZzzz ({sec}j)"
 
 msgid "Good night."
-msgstr ""
+msgstr "Bonan nokton"
 
 msgid "Zzz"
-msgstr ""
+msgstr "Zzz"
 
 #, python-brace-format
 msgid "Waiting for {secs}s ..."
-msgstr ""
+msgstr "Atendas {sec}j…"
 
 #, python-brace-format
 msgid "Looking around ({secs}s)"
-msgstr ""
+msgstr "Ĉirkaŭrigardante ({sec}j)"
 
 #, python-brace-format
 msgid "Hey {what} let's be friends!"
-msgstr ""
+msgstr "Hej {what}, ni estu amikoj!"
 
 #, python-brace-format
 msgid "Associating to {what}"
-msgstr ""
+msgstr "asociante al {what}"
 
 #, python-brace-format
 msgid "Yo {what}!"
-msgstr ""
+msgstr "Hej {what}!"
 
 #, python-brace-format
 msgid "Just decided that {mac} needs no WiFi!"
-msgstr ""
+msgstr "Ĵus decidis, ke {mac} ne bezonas konekton!"
 
 #, python-brace-format
 msgid "Deauthenticating {mac}"
-msgstr ""
+msgstr "Malaŭtentigi {mac}"
 
 #, python-brace-format
 msgid "Kickbanning {mac}!"
-msgstr ""
+msgstr "Forigante {mac}!"
 
 #, python-brace-format
 msgid "Cool, we got {num} new handshake{plural}!"
-msgstr ""
+msgstr "Mirinda, ni havas {num} novajn manpremojn!"
 
 #, python-brace-format
 msgid "You have {count} new message{plural}!"
-msgstr ""
+msgstr "Vi nun havas {num} novajn mesaĝojn"
 
 msgid "Oops, something went wrong ... Rebooting ..."
-msgstr ""
+msgstr "Lo okazis... Rekomencante…"
 
 #, python-brace-format
 msgid "Uploading data to {to} ..."
-msgstr ""
+msgstr "alŝuti datumojn al {to}…"
 
 #, python-brace-format
 msgid "Downloading from {name} ..."
-msgstr ""
+msgstr "Elŝutu de {name}…"
 
-#, python-brace-format
+#, fuzzy, python-brace-format
 msgid "Kicked {num} stations\n"
-msgstr ""
+msgstr "Forigita de {num} stacioj"
 
+#, fuzzy
 msgid "Made >999 new friends\n"
-msgstr ""
+msgstr "Faris pli ol 999 novajn amikojn!"
 
-#, python-brace-format
+#, fuzzy, python-brace-format
 msgid "Made {num} new friends\n"
-msgstr ""
+msgstr "faris (nombro) novajn amikojn"
 
-#, python-brace-format
+#, fuzzy, python-brace-format
 msgid "Got {num} handshakes\n"
-msgstr ""
+msgstr "Ricevis {num} novajn manpremojn"
 
 msgid "Met 1 peer"
-msgstr ""
+msgstr "Renkontita unu kolego"
 
 #, python-brace-format
 msgid "Met {num} peers"
-msgstr ""
+msgstr "renkontitajn {num} kolegojn"
 
 #, python-brace-format
 msgid ""
@@ -237,21 +237,24 @@ msgid ""
 "{associated} new friends and ate {handshakes} handshakes! #pwnagotchi "
 "#pwnlog #pwnlife #hacktheplanet #skynet"
 msgstr ""
+"Mi pwning dum {duration} kaj piedbatis {deauthed} klientojn!Mi ankaŭ "
+"renkontis {associated} novajn amikojn kaj manĝis {handshakes} manpremojn!"
+"#pwnagotchi #pwnlog #pwnlife #hacktheplanet #skynet"
 
 msgid "hours"
-msgstr ""
+msgstr "horror"
 
 msgid "minutes"
-msgstr ""
+msgstr "minutoj"
 
 msgid "seconds"
-msgstr ""
+msgstr "sekundoj"
 
 msgid "hour"
-msgstr ""
+msgstr "horo"
 
 msgid "minute"
-msgstr ""
+msgstr "minuto"
 
 msgid "second"
-msgstr ""
+msgstr "dua"

pwnagotchi/locale/it/LC_MESSAGES/voice.po

@@ -16,7 +16,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 
 msgid "ZzzzZZzzzzZzzz"
-msgstr ""
+msgstr "ZzzzZZzzzzZzzz"
 
 msgid "Hi, I'm Pwnagotchi! Starting ..."
 msgstr "Ciao! Piacere Pwnagotchi! Caricamento ..."
@@ -25,7 +25,7 @@ msgid "New day, new hunt, new pwns!"
 msgstr "Nuovo giorno...nuovi handshakes!!!"
 
 msgid "Hack the Planet!"
-msgstr ""
+msgstr "Hack il Pianeta"
 
 msgid "AI ready."
 msgstr "IA pronta."
@@ -34,18 +34,18 @@ msgid "The neural network is ready."
 msgstr "La rete neurale è pronta."
 
 msgid "Generating keys, do not turn off ..."
-msgstr ""
+msgstr "Generazione di chiavi, non spegnere"
 
 #, python-brace-format
 msgid "Hey, channel {channel} is free! Your AP will say thanks."
 msgstr "Hey, il canale {channel} è libero! Il tuo AP ringrazia."
 
 msgid "Reading last session logs ..."
-msgstr ""
+msgstr "Lettura dei log dell'ultima sessione ..."
 
 #, python-brace-format
 msgid "Read {lines_so_far} log lines so far ..."
-msgstr ""
+msgstr "Leggi le righe di log {lines_so_far} finora ..."
 
 msgid "I'm bored ..."
 msgstr "Che noia ..."
@@ -54,7 +54,7 @@ msgid "Let's go for a walk!"
 msgstr "Andiamo a fare una passeggiata!"
 
 msgid "This is the best day of my life!"
-msgstr "Questo è il più bel giorno della mia vita!!!!"
+msgstr "Questo e il miglior giorno della mia vita!!!!"
 
 msgid "Shitty day :/"
 msgstr "Giorno di merda :/"
@@ -72,22 +72,22 @@ msgid "Leave me alone ..."
 msgstr "Mi sento così solo..."
 
 msgid "I'm mad at you!"
-msgstr ""
+msgstr "sono arabiata con te"
 
 msgid "I'm living the life!"
-msgstr "Mi sento vivo!"
+msgstr "sono viva la vita!"
 
 msgid "I pwn therefore I am."
 msgstr "Pwn ergo sum."
 
 msgid "So many networks!!!"
-msgstr "Qui è pieno di reti!"
+msgstr "Qui pieno di reti!"
 
 msgid "I'm having so much fun!"
 msgstr "Mi sto divertendo tantissimo!"
 
 msgid "My crime is that of curiosity ..."
-msgstr ""
+msgstr "Il mio crimine ? quello della curiosit?"
 
 #, python-brace-format
 msgid "Hello {name}! Nice to meet you."
@@ -95,15 +95,15 @@ msgstr "Ciao {name}! E' un piacere."
 
 #, python-brace-format
 msgid "Yo {name}! Sup?"
-msgstr ""
+msgstr "Yo {name} Come va"
 
 #, python-brace-format
 msgid "Hey {name} how are you doing?"
-msgstr ""
+msgstr "Ehi {name} come stai?"
 
 #, python-brace-format
 msgid "Unit {name} is nearby!"
-msgstr "L'Unità {name} è vicina!"
+msgstr "L'Unit {name} e vicina!"
 
 #, python-brace-format
 msgid "Uhm ... goodbye {name}"
@@ -111,30 +111,30 @@ msgstr "Uhm ... addio {name}, mi mancherai..."
 
 #, python-brace-format
 msgid "{name} is gone ..."
-msgstr "{name} se n'è andato ..."
+msgstr "{name} se andato ..."
 
 #, python-brace-format
 msgid "Whoops ... {name} is gone."
-msgstr "Whoops ...{name} se n'è andato."
+msgstr "Whoops ...{name} se andato."
 
 #, python-brace-format
 msgid "{name} missed!"
-msgstr "{name} è scomparso..."
+msgstr "{name} scomparso..."
 
 msgid "Missed!"
 msgstr "Ehi! Dove sei andato!?"
 
 msgid "Good friends are a blessing!"
-msgstr ""
+msgstr "Buoni amici sono una benedizione"
 
 msgid "I love my friends!"
-msgstr ""
+msgstr "Amo i miei amici"
 
 msgid "Nobody wants to play with me ..."
 msgstr "Nessuno vuole giocare con me..."
 
 msgid "I feel so alone ..."
-msgstr "Mi sento così solo..."
+msgstr "Mi sento cos solo..."
 
 msgid "Where's everybody?!"
 msgstr "Dove sono tutti?!"
@@ -144,17 +144,17 @@ msgid "Napping for {secs}s ..."
 msgstr "Schiaccio un pisolino per {secs}s ..."
 
 msgid "Zzzzz"
-msgstr ""
+msgstr "Zzzzz"
 
 #, python-brace-format
 msgid "ZzzZzzz ({secs}s)"
-msgstr ""
+msgstr "ZzzZzzz ({secs}s)"
 
 msgid "Good night."
-msgstr ""
+msgstr "Buona notte"
 
 msgid "Zzz"
-msgstr ""
+msgstr "Zzz"
 
 #, python-brace-format
 msgid "Waiting for {secs}s ..."
@@ -182,7 +182,7 @@ msgstr "Ho appena deciso che {mac} non necessita di WiFi!"
 
 #, python-brace-format
 msgid "Deauthenticating {mac}"
-msgstr ""
+msgstr "Annullamento dell'autenticazione {mac}"
 
 #, python-brace-format
 msgid "Kickbanning {mac}!"
@@ -201,11 +201,11 @@ msgstr "Ops, qualcosa è andato storto ... Riavvio ..."
 
 #, python-brace-format
 msgid "Uploading data to {to} ..."
-msgstr ""
+msgstr "Caricamento dei dati in {to}"
 
 #, python-brace-format
 msgid "Downloading from {name} ..."
-msgstr ""
+msgstr "Scaricamento da {name} ..."
 
 #, python-brace-format
 msgid "Kicked {num} stations\n"
@@ -255,4 +255,4 @@ msgid "minute"
 msgstr "minuto"
 
 msgid "second"
-msgstr "secondo"
+msgstr "secondo"

pwnagotchi/locale/pt-br/LC_MESSAGES/voice.po

@@ -14,7 +14,7 @@ msgstr ""
 "Language-Team: LANGUAGE <LL@li.org>\n"
 "Language: Portuguese (Brazil)\n"
 "MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Type: text/plain; charset=utf-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
 msgid "ZzzzZZzzzzZzzz"

pwnagotchi/locale/voice.pot

@@ -3,12 +3,12 @@
 # This file is distributed under the same license as the PACKAGE package.
 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 #
-
+#, fuzzy
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-11-17 15:46+0100\n"
+"POT-Creation-Date: 2024-01-25 23:40+0100\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"

pwnagotchi/plugins/default/aircrackonly.py

@@ -19,6 +19,10 @@ class AircrackOnly(plugins.Plugin):
 
     def __init__(self):
         self.text_to_set = ""
+        self.options = dict()
+
+    def on_ready(self):
+        return
 
     def on_loaded(self):
         logging.info("aircrackonly plugin loaded")

pwnagotchi/plugins/default/auto-update.py

@@ -130,7 +130,7 @@ def install(display, update):
             source_path = "%s-%s" % (source_path, update['available'])
 
         # setup.py is going to install data files for us
-        os.system("cd %s && pip3 install . --no-cache-dir --break-system-packages" % source_path)
+        os.system("cd %s && pip3 install . --break-system-packages" % source_path)
     return True
 
 

pwnagotchi/plugins/default/fix_services.py

@@ -27,10 +27,9 @@ class FixServices(plugins.Plugin):
 
     def __init__(self):
         self.options = dict()
-        self.pattern = re.compile(r'brcmf_cfg80211_nexmon_set_channel.*?Set Channel failed')
+        self.pattern1 = re.compile(r'wifi error while hopping to channel')
-        self.pattern2 = re.compile(r'wifi error while hopping to channel')
+        self.pattern2 = re.compile(r'Firmware has halted or crashed')
-        self.pattern3 = re.compile(r'Firmware has halted or crashed')
+        self.pattern3 = re.compile(r'error 400: could not find interface wlan0mon')
-        self.pattern4 = re.compile(r'error 400: could not find interface wlan0mon')
         self.isReloadingMon = False
         self.connection = None
         self.LASTTRY = 0
@@ -46,23 +45,11 @@ class FixServices(plugins.Plugin):
         last_lines = self.get_last_lines('journalctl', ['-n10', '-k'], 10)
         try:
             cmd_output = subprocess.check_output("ip link show wlan0mon", shell=True)
-            logging.info("[Fix_Services ip link show wlan0mon]: %s" % repr(cmd_output))
+            logging.debug("[Fix_Services ip link show wlan0mon]: %s" % repr(cmd_output))
             if ",UP," in str(cmd_output):
                 logging.info("wlan0mon is up.")
 
-            if len(self.pattern.findall(last_lines)) >= 3:
+            logging.info("[Fix_Services] Logs look good!")
-                if hasattr(agent, 'view'):
-                    display = agent.view()
-                    display.set('status', 'Blind-Bug detected. Restarting.')
-                    display.update(force=True)
-                logging.info('[Fix_Services] Blind-Bug detected. Restarting.')
-                try:
-                    self._tryTurningItOffAndOnAgain(agent)
-                except Exception as err:
-                    logging.warning("[Fix_Services turnOffAndOn] %s" % repr(err))
-
-            else:
-                logging.info("[Fix_Services] Logs look good!")
 
         except Exception as err:
             logging.error("[Fix_Services ip link show wlan0mon]: %s" % repr(err))
@@ -121,21 +108,8 @@ class FixServices(plugins.Plugin):
             logging.debug("[Fix_Services]**** checking")
 
             # Look for pattern 1
-            if len(self.pattern.findall(last_lines)) >= 3:
+            if len(self.pattern1.findall(other_last_lines)) >= 5:
-                logging.info("[Fix_Services]**** Should trigger a reload of the wlan0mon device:\n%s" % last_lines)
+                logging.debug("[Fix_Services]**** Should trigger a reload of the wlan0mon device:\n%s" % last_lines)
-                if hasattr(agent, 'view'):
-                    display = agent.view()
-                    display.set('status', 'Blind-Bug detected. Restarting.')
-                    display.update(force=True)
-                logging.info('[Fix_Services] Blind-Bug detected. Restarting.')
-                try:
-                    self._tryTurningItOffAndOnAgain(agent)
-                except Exception as err:
-                    logging.warning("[Fix_Services] TTOAOA: %s" % repr(err))
-
-            # Look for pattern 2
-            elif len(self.pattern2.findall(other_last_lines)) >= 5:
-                logging.info("[Fix_Services]**** Should trigger a reload of the wlan0mon device:\n%s" % last_lines)
                 if hasattr(agent, 'view'):
                     display = agent.view()
                     display.set('status', 'Wifi channel stuck. Restarting recon.')
@@ -157,8 +131,8 @@ class FixServices(plugins.Plugin):
                 except Exception as err:
                     logging.error("[Fix_Services wifi.recon flip] %s" % repr(err))
 
-            # Look for pattern 3
+            # Look for pattern 2
-            elif len(self.pattern3.findall(other_last_lines)) >= 1:
+            elif len(self.pattern2.findall(other_last_lines)) >= 1:
                 logging.info("[Fix_Services] Firmware has halted or crashed. Restarting wlan0mon.")
                 if hasattr(agent, 'view'):
                     display = agent.view()
@@ -167,12 +141,12 @@ class FixServices(plugins.Plugin):
                 try:
                     # Run the monstart command to restart wlan0mon
                     cmd_output = subprocess.check_output("monstart", shell=True)
-                    logging.info("[Fix_Services monstart]: %s" % repr(cmd_output))
+                    logging.debug("[Fix_Services monstart]: %s" % repr(cmd_output))
                 except Exception as err:
                     logging.error("[Fix_Services monstart]: %s" % repr(err))
 
-            # Look for pattern 4
+            # Look for pattern 3
-            elif len(self.pattern4.findall(other_other_last_lines)) >= 3:
+            elif len(self.pattern3.findall(other_other_last_lines)) >= 3:
                 logging.info("[Fix_Services] wlan0 is down!")
                 if hasattr(agent, 'view'):
                     display = agent.view()
@@ -181,7 +155,7 @@ class FixServices(plugins.Plugin):
                 try:
                     # Run the monstart command to restart wlan0mon
                     cmd_output = subprocess.check_output("monstart", shell=True)
-                    logging.info("[Fix_Services monstart]: %s" % repr(cmd_output))
+                    logging.debug("[Fix_Services monstart]: %s" % repr(cmd_output))
                 except Exception as err:
                     logging.error("[Fix_Services monstart]: %s" % repr(err))
 
@@ -237,7 +211,7 @@ class FixServices(plugins.Plugin):
             # is it up?
             try:
                 cmd_output = subprocess.check_output("ip link show wlan0mon", shell=True)
-                logging.info("[Fix_Services ip link show wlan0mon]: %s" % repr(cmd_output))
+                logging.debug("[Fix_Services ip link show wlan0mon]: %s" % repr(cmd_output))
                 if ",UP," in str(cmd_output):
                     logging.info("wlan0mon is up. Skip reset?")
                     # not reliable, so don't skip just yet
@@ -309,11 +283,9 @@ class FixServices(plugins.Plugin):
                                     # stop looping and get back to recon
                                     break
                                 else:
-                                    logging.info(
+                                    logging.debug("[Fix_Services set wifi.interfaceface wlan0mon] failed? %s" % repr(result))
-                                        "[Fix_Services set wifi.interfaceface wlan0mon] failed? %s" % repr(result))
                             except Exception as err:
-                                logging.info(
+                                logging.debug("[Fix_Services set wifi.interface wlan0mon] except: %s" % repr(err))
-                                    "[Fix_Services set wifi.interface wlan0mon] except: %s" % repr(err))
                         except Exception as cerr:  #
                             if not display:
                                 print("failed loading wlan0mon attempt #%s: %s" % (tries, repr(cerr)))
@@ -362,7 +334,7 @@ class FixServices(plugins.Plugin):
                                                              "face": faces.HAPPY})
                     else:
                         print("I can see again")
-                    logging.info("[Fix_Services] wifi.recon on")
+                    logging.debug("[Fix_Services] wifi.recon on")
                     self.LASTTRY = time.time() + 120  # 2-minute pause until next time.
                 else:
                     logging.error("[Fix_Services] wifi.recon did not start up")
@@ -378,7 +350,7 @@ class FixServices(plugins.Plugin):
             try:
                 logging.info("[Fix_Services] unloaded")
             except Exception as err:
-                logging.info("[Fix_Services] unload err %s " % repr(err))
+                logging.error("[Fix_Services] unload err %s " % repr(err))
             pass
 
 

pwnagotchi/plugins/default/gps.py

@@ -20,6 +20,7 @@ class GPS(plugins.Plugin):
     def __init__(self):
         self.running = False
         self.coordinates = None
+        self.options = dict()
 
     def on_loaded(self):
         logging.info(f"gps plugin loaded for {self.options['device']}")

pwnagotchi/plugins/default/net-pos.py

@@ -117,7 +117,6 @@ class NetPos(plugins.Plugin):
         except OSError as os_e:
             logging.error("NET-POS: %s", os_e)
 
-
     def _get_netpos(self, agent):
         aps = agent.get_access_points()
         netpos = dict()

pwnagotchi/plugins/default/webgpsmap.py

@@ -1,9 +1,10 @@
+import sys
+
 import pwnagotchi.plugins as plugins
 import logging
 import os
 import json
 import re
-import datetime
 from flask import Response
 from functools import lru_cache
 from dateutil.parser import parse
@@ -22,6 +23,7 @@ from dateutil.parser import parse
 
 '''
 
+
 class Webgpsmap(plugins.Plugin):
     __author__ = 'https://github.com/xenDE and https://github.com/dadav'
     __version__ = '1.4.0'
@@ -103,7 +105,7 @@ class Webgpsmap(plugins.Plugin):
                         response_status = 200
                         response_mimetype = "application/xhtml+xml"
                         response_header_contenttype = 'text/html'
-                        response_header_contentdisposition = 'attachment; filename=webgpsmap.html';
+                        response_header_contentdisposition = 'attachment; filename=webgpsmap.html'
                     except Exception as error:
                         logging.error(f"[webgpsmap] on_webhook offlinemap: error: {error}")
                         return
@@ -149,7 +151,6 @@ class Webgpsmap(plugins.Plugin):
     def _get_pos_from_file(self, path):
         return PositionFile(path)
 
-
     def load_gps_from_dir(self, gpsdir, newest_only=False):
         """
         Parses the gps-data from disk
@@ -160,13 +161,9 @@ class Webgpsmap(plugins.Plugin):
 
         logging.info(f"[webgpsmap] scanning {handshake_dir}")
 
-
         all_files = os.listdir(handshake_dir)
-        #print(all_files)
+        # print(all_files)
-        all_pcap_files = [os.path.join(handshake_dir, filename)
+        all_pcap_files = [os.path.join(handshake_dir, filename) for filename in all_files if filename.endswith('.pcap')]
-                                for filename in all_files
-                                if filename.endswith('.pcap')
-                                ]
         all_geo_or_gps_files = []
         for filename_pcap in all_pcap_files:
             filename_base = filename_pcap[:-5]  # remove ".pcap"
@@ -300,7 +297,6 @@ class PositionFile:
             return parsed_ssid.groups()[0]
         return None
 
-
     def json(self):
         """
         returns the parsed json

pwnagotchi/plugins/default/wigle.py

@@ -52,10 +52,10 @@ def _transform_wigle_entry(gps_data, pcap_data, plugin_version):
     """
     dummy = StringIO()
     # write kismet header
-    dummy.write(f"WigleWifi-1.4,appRelease={plugin_version},model=pwnagotchi,release={__pwnagotchi_version__},"
+    dummy.write(f"WigleWifi-1.6,appRelease={plugin_version},model=pwnagotchi,release={__pwnagotchi_version__},"
-                f"device={pwnagotchi.name()},display=kismet,board=RaspberryPi,brand=pwnagotchi\n")
+                f"device={pwnagotchi.name()},display=kismet,board=RaspberryPi,brand=pwnagotchi,star=Sol,body=3,subBody=0\n")
-    dummy.write("MAC,SSID,AuthMode,FirstSeen,Channel,RSSI,CurrentLatitude,"
+    dummy.write(
-                "CurrentLongitude,AltitudeMeters,AccuracyMeters,Type\n")
+        "MAC,SSID,AuthMode,FirstSeen,Channel,RSSI,CurrentLatitude,CurrentLongitude,AltitudeMeters,AccuracyMeters,Type\n")
 
     writer = csv.writer(dummy, delimiter=",", quoting=csv.QUOTE_NONE, escapechar="\\")
     writer.writerow([
@@ -89,7 +89,7 @@ def _send_to_wigle(lines, api_key, donate=True, timeout=30):
     headers = {'Authorization': f"Basic {api_key}",
                'Accept': 'application/json'}
     data = {'donate': 'on' if donate else 'false'}
-    payload = {'file': (pwnagotchi.name()+".csv", dummy), 'type': 'multipart/form-data'}
+    payload = {'file': (pwnagotchi.name() + ".csv", dummy, 'multipart/form-data', {'Expires': '0'})}
     try:
         res = requests.post('https://api.wigle.net/api/v2/file/upload',
                             data=data,
@@ -104,10 +104,10 @@ def _send_to_wigle(lines, api_key, donate=True, timeout=30):
 
 
 class Wigle(plugins.Plugin):
-    __author__ = 'Dadav and fixed by Jayofelony'
+    __author__ = "Dadav and updated by Jayofelony"
-    __version__ = '3.0.0'
+    __version__ = "3.0.1"
-    __license__ = 'GPL3'
+    __license__ = "GPL3"
-    __description__ = 'This plugin automatically uploads collected wifis to wigle.net'
+    __description__ = "This plugin automatically uploads collected WiFi to wigle.net"
 
     def __init__(self):
         self.ready = False
@@ -121,15 +121,15 @@ class Wigle(plugins.Plugin):
             logging.debug("WIGLE: api_key isn't set. Can't upload to wigle.net")
             return
 
-        if not 'donate' in self.options:
+        if 'donate' not in self.options:
-            self.options['donate'] = True
+            self.options['donate'] = False
 
         self.ready = True
         logging.info("WIGLE: ready")
 
     def on_internet_available(self, agent):
         """
-        Called in manual mode when there's internet connectivity
+        Called when there's internet connectivity
         """
         if not self.ready or self.lock.locked():
             return
@@ -143,7 +143,7 @@ class Wigle(plugins.Plugin):
         all_files = os.listdir(handshake_dir)
         all_gps_files = [os.path.join(handshake_dir, filename)
                          for filename in all_files
-                         if filename.endswith('.gps.json') or filename.endswith('.paw-gps.json') or filename.endswith('.geo.json')]
+                         if filename.endswith('.gps.json') or filename.endswith('.geo.json')]
 
         all_gps_files = remove_whitelisted(all_gps_files, config['main']['whitelist'])
         new_gps_files = set(all_gps_files) - set(reported) - set(self.skip)
@@ -154,8 +154,6 @@ class Wigle(plugins.Plugin):
             for gps_file in new_gps_files:
                 if gps_file.endswith('.gps.json'):
                     pcap_filename = gps_file.replace('.gps.json', '.pcap')
-                if gps_file.endswith('.paw-gps.json'):
-                    pcap_filename = gps_file.replace('.paw-gps.json', '.pcap')
                 if gps_file.endswith('.geo.json'):
                     pcap_filename = gps_file.replace('.geo.json', '.pcap')
                 if not os.path.exists(pcap_filename):

pwnagotchi/ui/hw/waveshare2in13b_V4.py

@@ -7,7 +7,7 @@ from PIL import Image
 
 class Waveshare213bV4(DisplayImpl):
     def __init__(self, config):
-        super(Waveshare213bV4, self).__init__(config, 'waveshare213inb_v4')
+        super(Waveshare213bV4, self).__init__(config, 'waveshare2in13b_v4')
 
     def layout(self):
         if self.config['color'] == 'black':

pwnagotchi/ui/hw/waveshare3in52.py

@@ -9,36 +9,39 @@ class Waveshare3in52(DisplayImpl):
         super(Waveshare3in52, self).__init__(config, 'waveshare3in52')
 
     def layout(self):
-        fonts.setup(10, 8, 10, 18, 25, 9)
+        fonts.setup(16, 14, 16, 100, 31, 15)
-        self._layout['width'] = 240
+        self._layout['width'] = 360
-        self._layout['height'] = 360
+        self._layout['height'] = 240
-        self._layout['face'] = (0, 43)
+        self._layout['face'] = (0, 40)
-        self._layout['name'] = (0, 14)
+        self._layout['name'] = (0, 0)
-        self._layout['channel'] = (0, 0)
+        self._layout['channel'] = (300, 0)
-        self._layout['aps'] = (0, 71)
+        self._layout['aps'] = (0, 220)
-        self._layout['uptime'] = (0, 25)
+        self._layout['uptime'] = (120, 0)
-        self._layout['line1'] = [0, 12, 240, 12]
+        self._layout['line1'] = [0, 24, 360, 24]
-        self._layout['line2'] = [0, 116, 240, 116]
+        self._layout['line2'] = [0, 220, 360, 220]
-        self._layout['friend_face'] = (12, 88)
+        self._layout['friend_face'] = (0, 195)
-        self._layout['friend_name'] = (1, 103)
+        self._layout['friend_name'] = (0, 185)
-        self._layout['shakes'] = (26, 117)
+        self._layout['shakes'] = (100, 220)
-        self._layout['mode'] = (0, 117)
+        self._layout['mode'] = (0,200)
         self._layout['status'] = {
-            'pos': (65, 26),
+            'pos': (3, 170),
             'font': fonts.status_font(fonts.Small),
-            'max': 12
+            'max': 100
         }
         return self._layout
 
     def initialize(self):
-        logging.info("initializing waveshare 3.52 inch lcd display")
+        logging.info("initializing waveshare 3.52 inch  display")
         from pwnagotchi.ui.hw.libs.waveshare.v3in52.epd3in52 import EPD
         self._display = EPD()
         self._display.init()
         self._display.Clear()
 
     def render(self, canvas):
-        self._display.display(canvas)
+        buf = self._display.getbuffer(canvas)
+        self._display.display(buf)
+        self._display.refresh()
+
 
     def clear(self):
         self._display.Clear()

pwnagotchi/ui/view.py

@@ -153,8 +153,7 @@ class View(object):
         self.set('uptime', last_session.duration)
         self.set('channel', '-')
         self.set('aps', "%d" % last_session.associated)
-        self.set('shakes', '%d (%s)' % (last_session.handshakes, \
+        self.set('shakes', '%d (%s)' % (last_session.handshakes, utils.total_unique_handshakes(self._config['bettercap']['handshakes'])))
-                                        utils.total_unique_handshakes(self._config['bettercap']['handshakes'])))
         self.set_closest_peer(last_session.last_peer, last_session.peers)
         self.update()
 

setup.py

@@ -30,13 +30,6 @@ def install_file(source_filename, dest_filename):
 
 
 def install_system_files():
-    f = open("apt_packages.txt", "r")
-    for x in f:
-        if x == "":
-            continue
-        os.system(f"apt-get install {x}")
-    f.close()
-
     setup_path = os.path.dirname(__file__)
     data_path = os.path.join(setup_path, "builder/data")