Fix for pwnlib

Fix on auto-update.py

Makefile

@@ -48,15 +48,11 @@ $(PACKER):
 	rm $(PACKER).zip
 	chmod +x $@
 
-SDIST := dist/pwnagotchi-$(PWN_VERSION).tar.gz
-$(SDIST): setup.py pwnagotchi
-	python3 setup.py sdist
-
 # Building the image requires packer, but don't rebuild the image just because packer updated.
 pwnagotchi: | $(PACKER)
 
 # If the packer or ansible files are updated, rebuild the image.
-pwnagotchi: $(SDIST) builder/pwnagotchi.json.pkr.hcl builder/raspberrypi64.yml $(shell find builder/data -type f)
+pwnagotchi: builder/pwnagotchi.json.pkr.hcl builder/raspberrypi64.yml $(shell find builder/data -type f)
 
 	cd builder && $(PACKER) init pwnagotchi.json.pkr.hcl && sudo $(UNSHARE) $(PACKER) build -var "pwn_hostname=$(PWN_HOSTNAME)" -var "pwn_version=$(PWN_VERSION)" pwnagotchi.json.pkr.hcl
 

builder/data/etc/default/zramswap

@@ -0,0 +1,15 @@
+# Specifies amount of zram devices to create.
+# By default, zramswap-start will use all available cores.
+#CORES=1
+
+# Specifies the amount of RAM that should be used for zram
+# based on a percentage the total amount of available memory
+PERCENTAGE=60
+
+# Specifies a static amount of RAM that should be used for
+# the ZRAM devices, this is in MiB
+#ALLOCATION=256
+
+# Specifies the priority for the swap devices, see swapon(2)
+# for more details.
+#PRIORITY=100

builder/data/etc/dphys-swapfile

@@ -1,26 +0,0 @@
-# /etc/dphys-swapfile - user settings for dphys-swapfile package
-# author Neil Franklin, last modification 2010.05.05
-# copyright ETH Zuerich Physics Departement
-#   use under either modified/non-advertising BSD or GPL license
-
-# this file is sourced with . so full normal sh syntax applies
-
-# the default settings are added as commented out CONF_*=* lines
-
-
-# where we want the swapfile to be, this is the default
-#CONF_SWAPFILE=/var/swap
-
-# set size to absolute value, leaving empty (default) then uses computed value
-#   you most likely don't want this, unless you have an special disk situation
-CONF_SWAPSIZE=2048
-
-# set size to computed value, this times RAM size, dynamically adapts,
-#   guarantees that there is enough swap without wasting disk space on excess
-#CONF_SWAPFACTOR=2
-
-# restrict size (computed and absolute!) to maximally this limit
-#   can be set to empty for no limit, but beware of filled partitions!
-#   this is/was a (outdated?) 32bit kernel limit (in MBytes), do not overrun it
-#   but is also sensible on 64bit to prevent filling /var or even / partition
-#CONF_MAXSWAP=2048

builder/data/usr/bin/pwnlib

@@ -39,8 +39,10 @@ reload_brcm() {
 start_monitor_interface() {
   rfkill unblock all
   ifconfig wlan0 up
+  sleep 3
   iw dev wlan0 set power_save off
   iw phy "$(iw phy | head -1 | cut -d" " -f2)" interface add wlan0mon type monitor
+  sleep 2
   rfkill unblock all
   ifconfig wlan0 down
   ifconfig wlan0mon up
@@ -54,7 +56,7 @@ stop_monitor_interface() {
   ifconfig wlan0 up
 }
 
-# returns 0 if the specificed network interface is up
+# returns 0 if the specified network interface is up
 is_interface_up() {
   if grep -qi 'up' /sys/class/net/"$1"/operstate; then
     return 0

builder/raspberrypi64.yml

@@ -23,21 +23,17 @@
     services:
       enable:
         - bettercap.service
-        - dphys-swapfile.service
         - fstrim.timer
         - pwnagotchi.service
         - pwngrid-peer.service
+        - zramswap.service
       disable:
         - apt-daily-upgrade.service
         - apt-daily-upgrade.timer
         - apt-daily.service
         - apt-daily.timer
-        - avahi-daemon.service
-        - avahi-daemon.socket
         - bluetooth.service
         - ifup@wlan0.service
-        - triggerhappy.service
-        - wpa_supplicant.service
     packages:
       caplets:
         source: "https://github.com/jayofelony/caplets.git"
@@ -61,6 +57,7 @@
           - libpcap0.8-dbg
         remove:
           - avahi-daemon
+          - dhpys-swapfile
           - nfs-common
           - triggerhappy
           - wpasupplicant
@@ -73,7 +70,6 @@
           - build-essential
           - curl
           - dkms
-          - dphys-swapfile
           - fbi
           - flex
           - fonts-dejavu
@@ -161,17 +157,62 @@
           - wl
           - xxd
           - zlib1g-dev
+          - zram-tools
   environment:
     ARCHFLAGS: "-arch aarch64"
     QEMU_UNAME: "{{ kernel.full }}"
 
   tasks:
+    # First we install and remove unnecessary packages
+    - name: install packages
+      apt:
+        name: "{{ packages.apt.install }}"
+        state: present
+        update_cache: yes
+        install_recommends: false
+
+    - name: remove unnecessary apt packages
+      apt:
+        name: "{{ packages.apt.remove }}"
+        state: absent
+        purge: yes
+      register: removed
+
+    # Now we set up /boot/firmware
     - name: Create pi user
       copy:
         dest: /boot/firmware/userconf
         content: |
           pi:$6$3jNr0GA9KIyt4hmM$efeVIopdMQ8DGgEPCWWlbx3mJJNAYci1lEXGdlky0xPyjqwKNbwTL5SrCcpb4144C4IvzWjn7Iv.QjqmU7iyT/
 
+    - name: enable ssh on boot
+      file:
+        path: /boot/firmware/ssh
+        state: touch
+
+    - name: adjust /boot/firmware/config.txt
+      lineinfile:
+        dest: /boot/firmware/config.txt
+        insertafter: EOF
+        line: '{{ item }}'
+      with_items: "{{ system.boot_options }}"
+
+    - name: change root partition
+      replace:
+        dest: /boot/firmware/cmdline.txt
+        backup: no
+        regexp: "root=PARTUUID=[a-zA-Z0-9\\-]+"
+        replace: "root=/dev/mmcblk0p2"
+
+    - name: configure /boot/firmware/cmdline.txt
+      lineinfile:
+        path: /boot/firmware/cmdline.txt
+        backrefs: True
+        state: present
+        backup: no
+        regexp: '(.*)$'
+        line: '\1 modules-load=dwc2,g_ether'
+
     - name: change hostname
       lineinfile:
         dest: /etc/hostname
@@ -189,6 +230,7 @@
         state: present
       when: hostname.changed
 
+    # Now we disable sap and a2dp, we don't use them on rpi
     - name: disable sap plugin for bluetooth.service
       lineinfile:
         dest: /lib/systemd/system/bluetooth.service
@@ -196,19 +238,6 @@
         line: 'ExecStart=/usr/libexec/bluetooth/bluetoothd --noplugin=sap,a2dp'
         state: present
 
-    - name: configure dphys-swapfile
-      lineinfile:
-        path: /etc/dphys-swapfile
-        regexp: "^CONF_SWAPSIZE=.*$"
-        line: "CONF_SWAPSIZE=2048"
-
-    - name: install packages
-      apt:
-        name: "{{ packages.apt.install }}"
-        state: present
-        update_cache: yes
-        install_recommends: false
-
     ###########################################
     #
     # libpcap v1.9 - build from source
@@ -477,41 +506,6 @@
         state: absent
         path: /etc/update-motd.d/10-uname
 
-    - name: enable ssh on boot
-      file:
-        path: /boot/firmware/ssh
-        state: touch
-
-    - name: adjust /boot/config.txt
-      lineinfile:
-        dest: /boot/firmware/config.txt
-        insertafter: EOF
-        line: '{{ item }}'
-      with_items: "{{ system.boot_options }}"
-
-    - name: adjust /etc/modules
-      lineinfile:
-        dest: /etc/modules
-        insertafter: EOF
-        line: '{{ item }}'
-      with_items: "{{ system.modules }}"
-
-    - name: change root partition
-      replace:
-        dest: /boot/firmware/cmdline.txt
-        backup: no
-        regexp: "root=PARTUUID=[a-zA-Z0-9\\-]+"
-        replace: "root=/dev/mmcblk0p2"
-
-    - name: configure /boot/cmdline.txt
-      lineinfile:
-        path: /boot/cmdline.txt
-        backrefs: True
-        state: present
-        backup: no
-        regexp: '(.*)$'
-        line: '\1 modules-load=dwc2,g_ether'
-
     - name: Add pwnlog alias
       lineinfile:
         dest: /home/pi/.bashrc
@@ -563,13 +557,6 @@
         group: pi
         recurse: true
 
-    - name: remove unnecessary apt packages
-      apt:
-        name: "{{ packages.apt.remove }}"
-        state: absent
-        purge: yes
-      register: removed
-
     - name: clean apt cache
       apt:
         autoclean: true

pwnagotchi/_version.py

@@ -1 +1 @@
-__version__ = '2.7.1'
+__version__ = '2.7.2'

pwnagotchi/plugins/default/auto-update.py

@@ -212,7 +212,7 @@ class AutoUpdate(plugins.Plugin):
                             if install(display, update):
                                 num_installed += 1
                     else:
-                        prev_status = '%d new update%c available!' % (num_updates, 's' if num_updates > 1 else '')
+                        prev_status = '%d new update%s available!' % (num_updates, 's' if num_updates > 1 else '')
 
                 logging.info("[update] done")