Change repo's

Signed-off-by: jayofelony <oudshoorn.jeroen@gmail.com>

builder/data/usr/bin/pwnlib

@@ -1,191 +0,0 @@
-#!/usr/bin/env bash
-
-# well ... it blinks the led
-blink_led() {
-  # shellcheck disable=SC2034
-  for i in $(seq 1 "$1"); do
-    echo 0 >/sys/class/leds/led0/brightness
-    sleep 0.3
-    echo 1 >/sys/class/leds/led0/brightness
-    sleep 0.3
-  done
-  echo 0 >/sys/class/leds/led0/brightness
-  sleep 0.3
-}
-
-# reload mod
-reload_brcm() {
-  if ! modprobe -r brcmfmac; then
-    return 1
-  fi
-  sleep 1
-  if ! modprobe brcmfmac; then
-    return 1
-  fi
-  sleep 2
-  iw dev wlan0 set power_save off
-  return 0
-}
-
-# starts mon0
-start_monitor_interface() {
-  rfkill unblock all
-  ifconfig wlan0 up
-  sleep 3
-  iw dev wlan0 set power_save off
-  iw phy "$(iw phy | head -1 | cut -d" " -f2)" interface add wlan0mon type monitor
-  sleep 2
-  rfkill unblock all
-  ifconfig wlan0 down
-  ifconfig wlan0mon up
-  iw dev wlan0mon set power_save off
-}
-
-# stops mon0
-stop_monitor_interface() {
-  ifconfig wlan0mon down && iw dev wlan0mon del
-  reload_brcm
-  ifconfig wlan0 up
-}
-
-# returns 0 if the specified network interface is up
-is_interface_up() {
-  if grep -qi 'up' /sys/class/net/"$1"/operstate; then
-    return 0
-  fi
-  return 1
-}
-
-# returns 0 if conditions for AUTO mode are met
-is_auto_mode() {
-  # check override file first
-  if [ -f /root/.pwnagotchi-manual ]; then
-    # remove the override file if found
-    rm -rf /root/.pwnagotchi-manual
-    return 1
-  fi
-
-  # check override file first
-  if [ -f /root/.pwnagotchi-auto ]; then
-    # remove the override file if found
-    rm -rf /root/.pwnagotchi-auto
-    return 0
-  fi
-
-  # if usb0 is up, we're in MANU
-  if is_interface_up usb0; then
-    return 1
-  fi
-
-  # if eth0 is up (for other boards), we're in MANU
-  if is_interface_up eth0; then
-    return 0
-  fi
-
-  # no override, but none of the interfaces is up -> AUTO
-  return 0
-}
-
-# returns 0 if conditions for AUTO mode are met
-is_auto_mode_no_delete() {
-  # check override file first
-  if [ -f /root/.pwnagotchi-manual ]; then
-    return 1
-  fi
-
-  # check override file first
-  if [ -f /root/.pwnagotchi-auto ]; then
-    return 0
-  fi
-
-  # if usb0 is up, we're in MANU
-  if is_interface_up usb0; then
-    return 1
-  fi
-
-  # if eth0 is up (for other boards), we're in MANU
-  if is_interface_up eth0; then
-    return 0
-  fi
-
-  # no override, but none of the interfaces is up -> AUTO
-  return 0
-}
-
-# check if we need to decrypt something
-is_crypted_mode() {
-  if [ -f /root/.pwnagotchi-crypted ]; then
-    return 0
-  fi
-  return 1
-}
-
-# decryption loop
-is_decrypted() {
-  while read -r mapping container mount; do
-    # mapping   = name the device or file will be mapped to
-    # container = the luks encrypted device or file
-    # mount     = the mountpoint
-
-    # fail if not mounted
-    if ! mountpoint -q "$mount" >/dev/null 2>&1; then
-      if [ -f /tmp/.pwnagotchi-secret-"$mapping" ]; then
-        </tmp/.pwnagotchi-secret-"$mapping" read -r SECRET
-        if ! test -b /dev/disk/by-id/dm-uuid-*"$(cryptsetup luksUUID "$container" | tr -d -)"*; then
-          if echo -n "$SECRET" | cryptsetup luksOpen -d- "$container" "$mapping" >/dev/null 2>&1; then
-            echo "Container decrypted!"
-          fi
-        fi
-
-        if mount /dev/mapper/"$mapping" "$mount" >/dev/null 2>&1; then
-            echo "Mounted /dev/mapper/$mapping to $mount"
-            continue
-        fi
-      fi
-
-      if ! ip -4 addr show wlan0 | grep inet >/dev/null 2>&1; then
-        >/dev/null 2>&1 ip addr add 192.168.0.10/24 dev wlan0
-      fi
-
-      if ! pgrep -f decryption-webserver >/dev/null 2>&1; then
-        >/dev/null 2>&1 decryption-webserver &
-      fi
-
-      if ! pgrep wpa_supplicant >/dev/null 2>&1; then
-        >/tmp/wpa_supplicant.conf cat <<EOF
-ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
-update_config=1
-ap_scan=2
-
-network={
-    ssid="DECRYPT-ME"
-    mode=2
-    key_mgmt=WPA-PSK
-    psk="pwnagotchi"
-    frequency=2437
-}
-EOF
-        >/dev/null 2>&1 wpa_supplicant -u -s -O -D nl80211 -i wlan0 -c /tmp/wpa_supplicant.conf &
-      fi
-
-      if ! pgrep dnsmasq >/dev/null 2>&1; then
-        >/dev/null 2>&1 dnsmasq -k -p 53 -h -O "6,192.168.0.10" -A "/#/192.168.0.10" -i wlan0 -K -F 192.168.0.50,192.168.0.60,255.255.255.0,24h &
-      fi
-
-      return 1
-    fi
-  done </root/.pwnagotchi-crypted
-
-  # overwrite passwords
-  python3 -c 'print("A"*4096)' | tee /tmp/.pwnagotchi-secret-* >/dev/null
-  # delete
-  rm /tmp/.pwnagotchi-secret-*
-  sync # flush
-
-  pkill wpa_supplicant
-  pkill dnsmasq
-  pid="$(pgrep -f "decryption-webserver")"
-  [[ -n "$pid" ]] && kill "$pid"
-
-  return 0
-}