Fix a lot of stuff

Signed-off-by: jayofelony <oudshoorn.jeroen@gmail.com>

.github/workflows/publish.yml

@@ -23,8 +23,6 @@ jobs:
       - name: Get latest tag
         uses: actions-ecosystem/action-get-latest-tag@v1
         id: get-latest-tag
-        with:
-          token: ${{ secrets.GITHUB_TOKEN }}
 
       - name: Set LAST_VERSION as an environment variable
         run: echo "LAST_VERSION=${{ steps.get-latest-tag.outputs.tag }}" >> $GITHUB_ENV

builder/data/32bit/boot/config.txt

@@ -0,0 +1,63 @@
+# For more options and information see
+# http://rptl.io/configtxt
+# Some settings may impact device functionality. See link above for details
+
+# Uncomment some or all of these to enable the optional hardware interfaces
+#dtparam=i2c_arm=on
+#dtparam=i2s=on
+#dtparam=spi=on
+
+# Enable audio (loads snd_bcm2835)
+dtparam=audio=on
+
+# Additional overlays and parameters are documented
+# /boot/overlays/README
+
+# Automatically load overlays for detected cameras
+camera_auto_detect=1
+
+# Automatically load overlays for detected DSI displays
+display_auto_detect=1
+
+# Automatically load initramfs files, if found
+auto_initramfs=1
+
+# Enable DRM VC4 V3D driver
+dtoverlay=vc4-kms-v3d
+max_framebuffers=2
+
+# Don't have the firmware create an initial video= setting in cmdline.txt.
+# Use the kernel's default instead.
+disable_fw_kms_setup=1
+
+# Run in 64-bit mode
+arm_64bit=0
+
+# Disable compensation for displays with overscan
+disable_overscan=1
+
+# Run as fast as firmware / board allows
+arm_boost=1
+
+[cm4]
+# Enable host mode on the 2711 built-in XHCI USB controller.
+# This line should be removed if the legacy DWC2 controller is required
+# (e.g. for USB device mode) or if USB support is not required.
+otg_mode=1
+
+[all]
+dtoverlay=dwc2
+dtparam=i2c1=on
+dtparam=i2c_arm=on
+dtparam=spi=on
+gpu_mem=1
+dtoverlay=dwc2
+
+[pi0]
+dtoverlay=spi1-3cs
+
+[pi3]
+dtoverlay=spi1-3cs
+
+[pi4]
+dtoverlay=spi1-3cs

builder/data/32bit/etc/modules-load.d/modules.conf

@@ -0,0 +1,6 @@
+# /etc/modules: kernel modules to load at boot time.
+#
+# This file contains the names of kernel modules that should be loaded
+# at boot time, one per line. Lines beginning with "#" are ignored.
+# Parameters can be specified after the module name.
+i2c-dev

builder/data/32bit/raspberrypi32.yml

@@ -39,26 +39,6 @@
       hostname: "{{ lookup('env', 'PWN_HOSTNAME') | default('pwnagotchi', true) }}"
       version: "{{ lookup('env', 'PWN_VERSION') | default('pwnagotchi-torch', true) }}"
       custom_plugin_dir: "/usr/local/share/pwnagotchi/custom-plugins"
-    system:
-      boot_options:
-        - "#### pwnagotchi additions"
-        - "# this pwnagotchi image is 32-bit only no v8+ headers to build nexmon for 64 bit"
-        - "arm_64bit=0"
-        - "# dwc2 for RNDIS. comment out, and remove dwc2 and g_ether from cmdline.txt for X306 usb battery hat"
-        - "dtoverlay=dwc2"
-        - "dtoverlay=spi0-0cs"
-        - "dtparam=i2c1=on"
-        - "dtparam=i2c_arm=on"
-        - "dtparam=spi=on"
-        - "gpu_mem=16"
-        - "#### audio out on pins 18 and 19"
-        - "#dtoverlay=audremap,pins_18_19"
-        - "#### touchscreen on waveshare touch e-paper"
-        - "#dtoverlay=goodix,interrupt=27,reset=22"
-        - "#### for PWM backlighting on pimoroni displayhatmini"
-        - "dtoverlay=pwm-2chan,pin=12,func=4,pin2=13,func2=4"
-      modules:
-        - "i2c-dev"
     services:
       enable:
         - bettercap.service
@@ -475,20 +455,6 @@
         path: /boot/ssh
         state: touch
 
-    - name: adjust /boot/config.txt
-      lineinfile:
-        dest: /boot/config.txt
-        insertafter: EOF
-        line: '{{ item }}'
-      with_items: "{{system.boot_options}}"
-
-    - name: adjust /etc/modules
-      lineinfile:
-        dest: /etc/modules
-        insertafter: EOF
-        line: '{{ item }}'
-      with_items: "{{system.modules}}"
-
     - name: change root partition
       replace:
         dest: /boot/cmdline.txt

builder/data/64bit/boot/firmware/config.txt

@@ -0,0 +1,66 @@
+# For more options and information see
+# http://rptl.io/configtxt
+# Some settings may impact device functionality. See link above for details
+
+# Uncomment some or all of these to enable the optional hardware interfaces
+#dtparam=i2c_arm=on
+#dtparam=i2s=on
+#dtparam=spi=on
+
+# Enable audio (loads snd_bcm2835)
+dtparam=audio=on
+
+# Additional overlays and parameters are documented
+# /boot/firmware/overlays/README
+
+# Automatically load overlays for detected cameras
+camera_auto_detect=1
+
+# Automatically load overlays for detected DSI displays
+display_auto_detect=1
+
+# Automatically load initramfs files, if found
+auto_initramfs=1
+
+# Enable DRM VC4 V3D driver
+dtoverlay=vc4-kms-v3d
+max_framebuffers=2
+
+# Don't have the firmware create an initial video= setting in cmdline.txt.
+# Use the kernel's default instead.
+disable_fw_kms_setup=1
+
+# Run in 64-bit mode
+arm_64bit=1
+
+# Disable compensation for displays with overscan
+disable_overscan=1
+
+# Run as fast as firmware / board allows
+arm_boost=1
+
+[cm4]
+# Enable host mode on the 2711 built-in XHCI USB controller.
+# This line should be removed if the legacy DWC2 controller is required
+# (e.g. for USB device mode) or if USB support is not required.
+otg_mode=1
+
+[all]
+dtparam=i2c1=on
+dtparam=i2c_arm=on
+dtparam=spi=on
+gpu_mem=1
+dtoverlay=dwc2
+
+[pi0]
+dtoverlay=spi0-0cs
+
+
+[pi3]
+dtoverlay=spi0-0cs
+
+[pi4]
+dtoverlay=spi0-0cs
+
+[pi5]
+dtoverlay=spi0-0cs

builder/data/64bit/etc/modules-load.d/modules.conf

@@ -0,0 +1,6 @@
+# /etc/modules: kernel modules to load at boot time.
+#
+# This file contains the names of kernel modules that should be loaded
+# at boot time, one per line. Lines beginning with "#" are ignored.
+# Parameters can be specified after the module name.
+i2c-dev

builder/data/64bit/raspberrypi64.yml

@@ -11,23 +11,6 @@
     pwnagotchi:
       hostname: "{{ lookup('env', 'PWN_HOSTNAME') | default('pwnagotchi', true) }}"
       version: "{{ lookup('env', 'PWN_VERSION') | default('pwnagotchi', true) }}"
-    system:
-      boot_options:
-        - "dtoverlay=dwc2"
-        - "dtparam=i2c1=on"
-        - "dtparam=i2c_arm=on"
-        - "dtparam=spi=on"
-        - "gpu_mem=16"
-        - "[pi0]"
-        - "dtoverlay=spi0-0cs"
-        - "[pi3]"
-        - "dtoverlay=spi0-0cs"
-        - "[pi4]"
-        - "dtoverlay=spi0-0cs"
-        - "[pi5]"
-        - "dtoverlay=spi0-0cs"
-      modules:
-        - "i2c-dev"
     services:
       enable:
         - bettercap.service
@@ -211,25 +194,6 @@
         path: /etc/rc.local
         state: absent
 
-    - name: adjust /boot/config.txt
-      blockinfile:
-        dest: /boot/config.txt
-        insertafter: EOF
-        block: |
-          dtoverlay=dwc2
-          dtparam=i2c1=on
-          dtparam=i2c_arm=on"
-          dtparam=spi=on
-          gpu_mem=16
-          [pi0]
-          dtoverlay=spi0-0cs
-          [pi3]
-          dtoverlay=spi0-0cs
-          [pi4]
-          dtoverlay=spi0-0cs
-          [pi5]
-          dtoverlay=spi0-0cs
-
     - name: change root partition
       replace:
         dest: /boot/firmware/cmdline.txt

builder/data/64bit/usr/bin/pwnlib

@@ -1,18 +1,5 @@
 #!/usr/bin/env bash
 
-# well ... it blinks the led
-blink_led() {
-  # shellcheck disable=SC2034
-  for i in $(seq 1 "$1"); do
-    echo 0 >/sys/class/leds/led0/brightness
-    sleep 0.3
-    echo 1 >/sys/class/leds/led0/brightness
-    sleep 0.3
-  done
-  echo 0 >/sys/class/leds/led0/brightness
-  sleep 0.3
-}
-
 # reload mod
 reload_brcm() {
   if ! modprobe -r brcmfmac; then

pwnagotchi/ui/web/server.py

@@ -47,6 +47,6 @@ class Server:
             formatServerIpAddress = '[::]' if self._address == '::' else self._address
             logging.info("web ui available at http://%s:%d/" % (formatServerIpAddress, self._port))
 
-            app.run(host=self._address, port=self._port, debug=False)
+            app.run(host=self._address, port=self._port)
         else:
             logging.info("could not get ip of usb0, video server not starting")