Merge remote-tracking branch 'origin/master'

pwnagotchi/ui/display.py

@@ -217,6 +217,18 @@ class Display(View):
     def is_displayhatmini(self):
         return self._implementation.name == 'displayhatmini'
 
+    def is_pirateaudio(self):
+        return self._implementation.name == 'pirateaudio'
+
+    def is_pitft(self):
+        return self._implementation.name == 'pitft'
+
+    def is_tftbonnet(self):
+        return self._implementation.name == 'tftbonnet'
+        
+    def is_waveshareoledlcd(self):
+        return self._implementation.name == 'waveshareoledlcd'
+
     def is_waveshare35lcd(self):
         return self._implementation.name == 'waveshare35lcd'
 

pwnagotchi/ui/hw/__init__.py

@@ -21,6 +21,10 @@ from pwnagotchi.ui.hw.waveshare2in13b_V4 import Waveshare213bV4
 from pwnagotchi.ui.hw.waveshare3in5lcd import Waveshare35lcd
 from pwnagotchi.ui.hw.spotpear24in import Spotpear24inch
 from pwnagotchi.ui.hw.displayhatmini import DisplayHatMini
+from pwnagotchi.ui.hw.pirateaudio import PirateAudio
+from pwnagotchi.ui.hw.pitft import Pitft
+from pwnagotchi.ui.hw.tftbonnet import TftBonnet
+from pwnagotchi.ui.hw.waveshareoledlcd import Waveshareoledlcd
 from pwnagotchi.ui.hw.waveshare1in02 import Waveshare1in02
 from pwnagotchi.ui.hw.waveshare1in54 import Waveshare154
 from pwnagotchi.ui.hw.waveshare1in54_V2 import Waveshare154V2
@@ -97,7 +101,19 @@ def display_for(config):
 
     elif config['ui']['display']['type'] == 'displayhatmini':
         return DisplayHatMini(config)
+  
+    elif config['ui']['display']['type'] == 'pirateaudio':
+        return PirateAudio(config)
+        
+    elif config['ui']['display']['type'] == 'pitft':
+        return Pitft(config)
 
+    elif config['ui']['display']['type'] == 'tftbonnet':
+        return TftBonnet(config)
+
+    elif config['ui']['display']['type'] == 'waveshareoledlcd':
+        return Waveshareoledlcd(config)
+        
     elif config['ui']['display']['type'] == 'waveshare1in02':
         return Waveshare1in02(config)
 

pwnagotchi/ui/hw/libs/adafruit/pitft/ILI9341.py

@@ -0,0 +1,362 @@
+# Copyright (c) 2014 Adafruit Industries
+# Author: Tony DiCola
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+
+# Modified for Pwnagotchi by RasTacsko
+# Based on ST7899 driver for pimoroni displayhatmini by Do-Ki
+
+import numbers
+import time
+import numpy as np
+
+from PIL import Image
+from PIL import ImageDraw
+
+import spidev
+import RPi.GPIO as GPIO
+
+__version__ = '0.0.1'
+
+# Constants for interacting with display registers.
+ILI9341_TFTWIDTH = 320
+ILI9341_TFTHEIGHT = 240
+
+ILI9341_NOP = 0x00
+ILI9341_SWRESET = 0x01
+ILI9341_RDDID = 0x04
+ILI9341_RDDST = 0x09
+
+ILI9341_SLPIN = 0x10
+ILI9341_SLPOUT = 0x11
+ILI9341_PTLON = 0x12
+ILI9341_NORON = 0x13
+
+ILI9341_RDMODE = 0x0A
+ILI9341_RDMADCTL = 0x0B
+ILI9341_RDPIXFMT = 0x0C
+ILI9341_RDIMGFMT = 0x0A
+ILI9341_RDSELFDIAG = 0x0F
+
+ILI9341_INVOFF = 0x20
+ILI9341_INVON = 0x21
+ILI9341_GAMMASET = 0x26
+ILI9341_DISPOFF = 0x28
+ILI9341_DISPON = 0x29
+
+ILI9341_CASET = 0x2A
+ILI9341_PASET = 0x2B
+ILI9341_RAMWR = 0x2C
+ILI9341_RAMRD = 0x2E
+
+ILI9341_PTLAR = 0x30
+ILI9341_MADCTL = 0x36
+ILI9341_PIXFMT = 0x3A
+
+ILI9341_FRMCTR1 = 0xB1
+ILI9341_FRMCTR2 = 0xB2
+ILI9341_FRMCTR3 = 0xB3
+ILI9341_INVCTR = 0xB4
+ILI9341_DFUNCTR = 0xB6
+
+ILI9341_PWCTR1 = 0xC0
+ILI9341_PWCTR2 = 0xC1
+ILI9341_PWCTR3 = 0xC2
+ILI9341_PWCTR4 = 0xC3
+ILI9341_PWCTR5 = 0xC4
+ILI9341_VMCTR1 = 0xC5
+ILI9341_VMCTR2 = 0xC7
+
+ILI9341_RDID1 = 0xDA
+ILI9341_RDID2 = 0xDB
+ILI9341_RDID3 = 0xDC
+ILI9341_RDID4 = 0xDD
+
+ILI9341_GMCTRP1 = 0xE0
+ILI9341_GMCTRN1 = 0xE1
+
+ILI9341_PWCTR6 = 0xFC
+
+class ILI9341(object):
+    """Representation of an ILI9341 TFT LCD."""
+
+    def __init__(self, port, cs, dc, backlight, rst=None, 
+                 width=ILI9341_TFTWIDTH, height=ILI9341_TFTHEIGHT,
+                 rotation=270, invert=False, spi_speed_hz=64000000, 
+                 offset_left=0, offset_top=0):
+        """Create an instance of the display using SPI communication.
+        Must provide the GPIO pin number for the D/C pin and the SPI driver.
+        Can optionally provide the GPIO pin number for the reset pin as the rst parameter.
+        :param port: SPI port number -> 0
+        :param cs: SPI chip-select number (0 or 1 for BCM) -> 1
+        :param backlight: Pin for controlling backlight -> 18
+        :param rst: Reset pin for ILI9341 -> 24?
+        :param width: Width of display connected to ILI9341 -> 240
+        :param height: Height of display connected to ILI9341 -> 320
+        :param rotation: Rotation of display connected to ILI9341
+        :param invert: Invert display
+        :param spi_speed_hz: SPI speed (in Hz)
+        """
+
+        if rotation not in [0, 90, 180, 270]:
+            raise ValueError("Invalid rotation {}".format(rotation))
+
+        GPIO.setwarnings(False)
+        GPIO.setmode(GPIO.BCM)
+
+        self._spi = spidev.SpiDev(port, cs)
+        self._spi.mode = 0
+        self._spi.lsbfirst = False
+        self._spi.max_speed_hz = spi_speed_hz
+
+        self._dc = dc
+        self._rst = rst
+        self._width = width
+        self._height = height
+        self._rotation = rotation
+        self._invert = invert
+
+        self._offset_left = offset_left
+        self._offset_top = offset_top
+
+        # Set DC as output.
+        GPIO.setup(dc, GPIO.OUT)
+
+        # Setup backlight as output (if provided).
+        self._backlight = backlight
+        if backlight is not None:
+            GPIO.setup(backlight, GPIO.OUT)
+            GPIO.output(backlight, GPIO.LOW)
+            time.sleep(0.05)
+            GPIO.output(backlight, GPIO.HIGH)
+
+        # Setup reset as output (if provided).
+        if rst is not None:
+            GPIO.setup(self._rst, GPIO.OUT)
+            self.reset()
+
+        # Create an image buffer.
+        self.buffer = Image.new('RGB', (width, height))
+
+        self._init()
+
+    def send(self, data, is_data=True, chunk_size=4096):
+        """Write a byte or array of bytes to the display. Is_data parameter
+        controls if byte should be interpreted as display data (True) or command
+        data (False).  Chunk_size is an optional size of bytes to write in a
+        single SPI transaction, with a default of 4096.
+        """
+        # Set DC low for command, high for data.
+        GPIO.output(self._dc, is_data)
+        # Convert scalar argument to list so either can be passed as parameter.
+        if isinstance(data, numbers.Number):
+            data = [data & 0xFF]
+        # Write data a chunk at a time.
+        for start in range(0, len(data), chunk_size):
+            end = min(start+chunk_size, len(data))
+            self._spi.xfer(data[start:end])
+
+    def set_backlight(self, value):
+        """Set the backlight on/off."""
+        if self._backlight is not None:
+            GPIO.output(self._backlight, value)
+
+    @property
+    def width(self):
+        return self._width if self._rotation == 0 or self._rotation == 180 else self._height
+
+    @property
+    def height(self):
+        return self._height if self._rotation == 0 or self._rotation == 180 else self._width
+
+    def command(self, data):
+        """Write a byte or array of bytes to the display as command data."""
+        self.send(data, False)
+
+    def data(self, data):
+        """Write a byte or array of bytes to the display as display data."""
+        self.send(data, True)
+
+    def reset(self):
+        """Reset the display, if reset pin is connected."""
+        if self._rst is not None:
+            GPIO.output(self._rst, 1)
+            time.sleep(0.005)
+            GPIO.output(self._rst, 0)
+            time.sleep(0.02)
+            GPIO.output(self._rst, 1)
+            time.sleep(0.150)
+
+    def _init(self):
+        # Initialize the display.  Broken out as a separate function so it can
+        # be overridden by other displays in the future.
+        self.command(0xEF)
+        self.data(0x03)
+        self.data(0x80)
+        self.data(0x02)
+        self.command(0xCF)
+        self.data(0x00)
+        self.data(0XC1)
+        self.data(0X30)
+        self.command(0xED)
+        self.data(0x64)
+        self.data(0x03)
+        self.data(0X12)
+        self.data(0X81)
+        self.command(0xE8)
+        self.data(0x85)
+        self.data(0x00)
+        self.data(0x78)
+        self.command(0xCB)
+        self.data(0x39)
+        self.data(0x2C)
+        self.data(0x00)
+        self.data(0x34)
+        self.data(0x02)
+        self.command(0xF7)
+        self.data(0x20)
+        self.command(0xEA)
+        self.data(0x00)
+        self.data(0x00)
+        self.command(ILI9341_PWCTR1)    # Power control
+        self.data(0x23)                    # VRH[5:0]
+        self.command(ILI9341_PWCTR2)    # Power control
+        self.data(0x10)                    # SAP[2:0];BT[3:0]
+        self.command(ILI9341_VMCTR1)    # VCM control
+        self.data(0x3e)
+        self.data(0x28)
+        self.command(ILI9341_VMCTR2)    # VCM control2
+        self.data(0x86)                    # --
+        self.command(ILI9341_MADCTL)    #  Memory Access Control
+        self.data(0x48)
+        self.command(ILI9341_PIXFMT)
+        self.data(0x55)
+        self.command(ILI9341_FRMCTR1)
+        self.data(0x00)
+        self.data(0x18)
+        self.command(ILI9341_DFUNCTR)    #  Display Function Control
+        self.data(0x08)
+        self.data(0x82)
+        self.data(0x27)
+        self.command(0xF2)                #  3Gamma Function Disable
+        self.data(0x00)
+        self.command(ILI9341_GAMMASET)    # Gamma curve selected
+        self.data(0x01)
+        self.command(ILI9341_GMCTRP1)    # Set Gamma
+        self.data(0x0F)
+        self.data(0x31)
+        self.data(0x2B)
+        self.data(0x0C)
+        self.data(0x0E)
+        self.data(0x08)
+        self.data(0x4E)
+        self.data(0xF1)
+        self.data(0x37)
+        self.data(0x07)
+        self.data(0x10)
+        self.data(0x03)
+        self.data(0x0E)
+        self.data(0x09)
+        self.data(0x00)
+        self.command(ILI9341_GMCTRN1)    # Set Gamma
+        self.data(0x00)
+        self.data(0x0E)
+        self.data(0x14)
+        self.data(0x03)
+        self.data(0x11)
+        self.data(0x07)
+        self.data(0x31)
+        self.data(0xC1)
+        self.data(0x48)
+        self.data(0x08)
+        self.data(0x0F)
+        self.data(0x0C)
+        self.data(0x31)
+        self.data(0x36)
+        self.data(0x0F)
+        if self._invert:
+            self.command(ILI9341_INVON)   # Invert display
+        else:
+            self.command(ILI9341_INVOFF)  # Don't invert display
+        self.command(ILI9341_SLPOUT)    # Exit Sleep
+        time.sleep(0.120)
+        self.command(ILI9341_DISPON)    # Display on
+
+    def begin(self):
+        """Set up the display deprecated. 
+        Included in __init__. """
+        pass
+
+    def set_window(self, x0=0, y0=0, x1=None, y1=None):
+        """Set the pixel address window for proceeding drawing commands. x0 and
+        x1 should define the minimum and maximum x pixel bounds.  y0 and y1
+        should define the minimum and maximum y pixel bound.  If no parameters
+        are specified the default will be to update the entire display from 0,0
+        to 239,319.
+        """
+        if x1 is None:
+            x1 = self.width-1
+        if y1 is None:
+            y1 = self.height-1
+
+        self.command(ILI9341_CASET)        # Column addr set
+        self.data(x0 >> 8)
+        self.data(x0 & 0xFF)             # XSTART
+        self.data(x1 >> 8)
+        self.data(x1 & 0xFF)             # XEND
+        self.command(ILI9341_PASET)        # Row addr set
+        self.data(y0 >> 8)
+        self.data(y0 & 0xFF)             # YSTART
+        self.data(y1 >> 8)
+        self.data(y1 & 0xFF)             # YEND
+        self.command(ILI9341_RAMWR)        # write to RAM
+
+    def display(self, image):
+        """Write the provided image to the hardware.
+        :param image: Should be RGB format and the same dimensions as the display hardware.
+        """
+        # Set address bounds to entire display.
+        self.set_window()
+
+        # Convert image to 16bit RGB565 format and
+        # flatten into bytes.
+        pixelbytes = self.image_to_data(image, self._rotation)
+
+        # Write data to hardware.
+        for i in range(0, len(pixelbytes), 4096):
+            self.data(pixelbytes[i:i + 4096])
+
+    def image_to_data(self, image, rotation=0):
+        if not isinstance(image, np.ndarray):
+            image = np.array(image.convert('RGB'))
+
+        # Rotate the image
+        pb = np.rot90(image, rotation // 90).astype('uint16')
+
+
+        # Mask and shift the 888 RGB into 565 RGB
+        red   = (pb[..., [0]] & 0xf8) << 8
+        green = (pb[..., [1]] & 0xfc) << 3
+        blue  = (pb[..., [2]] & 0xf8) >> 3
+
+        # Stick 'em together
+        result = red | green | blue
+
+        # Output the raw bytes
+        return result.byteswap().tobytes()

pwnagotchi/ui/hw/libs/adafruit/tftbonnet/ST7789.py

@@ -0,0 +1,360 @@
+# Copyright (c) 2014 Adafruit Industries
+# Author: Tony DiCola
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+import numbers
+import time
+import numpy as np
+
+import spidev
+import RPi.GPIO as GPIO
+
+
+__version__ = '0.0.4'
+
+BG_SPI_CS_BACK = 0
+BG_SPI_CS_FRONT = 1
+
+SPI_CLOCK_HZ = 16000000
+
+ST7789_NOP = 0x00
+ST7789_SWRESET = 0x01
+ST7789_RDDID = 0x04
+ST7789_RDDST = 0x09
+
+ST7789_SLPIN = 0x10
+ST7789_SLPOUT = 0x11
+ST7789_PTLON = 0x12
+ST7789_NORON = 0x13
+
+ST7789_INVOFF = 0x20
+ST7789_INVON = 0x21
+ST7789_DISPOFF = 0x28
+ST7789_DISPON = 0x29
+
+ST7789_CASET = 0x2A
+ST7789_RASET = 0x2B
+ST7789_RAMWR = 0x2C
+ST7789_RAMRD = 0x2E
+
+ST7789_PTLAR = 0x30
+ST7789_MADCTL = 0x36
+ST7789_COLMOD = 0x3A
+
+ST7789_FRMCTR1 = 0xB1
+ST7789_FRMCTR2 = 0xB2
+ST7789_FRMCTR3 = 0xB3
+ST7789_INVCTR = 0xB4
+ST7789_DISSET5 = 0xB6
+
+ST7789_GCTRL = 0xB7
+ST7789_GTADJ = 0xB8
+ST7789_VCOMS = 0xBB
+
+ST7789_LCMCTRL = 0xC0
+ST7789_IDSET = 0xC1
+ST7789_VDVVRHEN = 0xC2
+ST7789_VRHS = 0xC3
+ST7789_VDVS = 0xC4
+ST7789_VMCTR1 = 0xC5
+ST7789_FRCTRL2 = 0xC6
+ST7789_CABCCTRL = 0xC7
+
+ST7789_RDID1 = 0xDA
+ST7789_RDID2 = 0xDB
+ST7789_RDID3 = 0xDC
+ST7789_RDID4 = 0xDD
+
+ST7789_GMCTRP1 = 0xE0
+ST7789_GMCTRN1 = 0xE1
+
+ST7789_PWCTR6 = 0xFC
+
+
+class ST7789(object):
+    """Representation of an ST7789 TFT LCD."""
+
+    def __init__(self, port, cs, dc, backlight, rst=None, width=240,
+                 height=240, rotation=90, invert=True, spi_speed_hz=60 * 1000 * 1000,
+                 offset_left=0,
+                 offset_top=0):
+        """Create an instance of the display using SPI communication.
+
+        Must provide the GPIO pin number for the D/C pin and the SPI driver.
+
+        Can optionally provide the GPIO pin number for the reset pin as the rst parameter.
+
+        :param port: SPI port number
+        :param cs: SPI chip-select number (0 or 1 for BCM
+        :param backlight: Pin for controlling backlight
+        :param rst: Reset pin for ST7789
+        :param width: Width of display connected to ST7789
+        :param height: Height of display connected to ST7789
+        :param rotation: Rotation of display connected to ST7789
+        :param invert: Invert display
+        :param spi_speed_hz: SPI speed (in Hz)
+
+        """
+        if rotation not in [0, 90, 180, 270]:
+            raise ValueError("Invalid rotation {}".format(rotation))
+
+        if width != height and rotation in [90, 270]:
+            raise ValueError("Invalid rotation {} for {}x{} resolution".format(rotation, width, height))
+
+        GPIO.setwarnings(False)
+        GPIO.setmode(GPIO.BCM)
+
+        self._spi = spidev.SpiDev(port, cs)
+        self._spi.mode = 0
+        self._spi.lsbfirst = False
+        self._spi.max_speed_hz = spi_speed_hz
+
+        self._dc = dc
+        self._rst = rst
+        self._width = width
+        self._height = height
+        self._rotation = rotation
+        self._invert = invert
+
+        self._offset_left = offset_left
+        self._offset_top = offset_top
+
+        # Set DC as output.
+        GPIO.setup(dc, GPIO.OUT)
+
+        # Setup backlight as output (if provided).
+        self._backlight = backlight
+        if backlight is not None:
+            GPIO.setup(backlight, GPIO.OUT)
+            GPIO.output(backlight, GPIO.LOW)
+            time.sleep(0.1)
+            GPIO.output(backlight, GPIO.HIGH)
+
+        # Setup reset as output (if provided).
+        if rst is not None:
+            GPIO.setup(self._rst, GPIO.OUT)
+            self.reset()
+        self._init()
+
+    def send(self, data, is_data=True, chunk_size=4096):
+        """Write a byte or array of bytes to the display. Is_data parameter
+        controls if byte should be interpreted as display data (True) or command
+        data (False).  Chunk_size is an optional size of bytes to write in a
+        single SPI transaction, with a default of 4096.
+        """
+        # Set DC low for command, high for data.
+        GPIO.output(self._dc, is_data)
+        # Convert scalar argument to list so either can be passed as parameter.
+        if isinstance(data, numbers.Number):
+            data = [data & 0xFF]
+        # Write data a chunk at a time.
+        for start in range(0, len(data), chunk_size):
+            end = min(start + chunk_size, len(data))
+            self._spi.xfer(data[start:end])
+
+    def set_backlight(self, value):
+        """Set the backlight on/off."""
+        if self._backlight is not None:
+            GPIO.output(self._backlight, value)
+
+    @property
+    def width(self):
+        return self._width if self._rotation == 0 or self._rotation == 180 else self._height
+
+    @property
+    def height(self):
+        return self._height if self._rotation == 0 or self._rotation == 180 else self._width
+
+    def command(self, data):
+        """Write a byte or array of bytes to the display as command data."""
+        self.send(data, False)
+
+    def data(self, data):
+        """Write a byte or array of bytes to the display as display data."""
+        self.send(data, True)
+
+    def reset(self):
+        """Reset the display, if reset pin is connected."""
+        if self._rst is not None:
+            GPIO.output(self._rst, 1)
+            time.sleep(0.500)
+            GPIO.output(self._rst, 0)
+            time.sleep(0.500)
+            GPIO.output(self._rst, 1)
+            time.sleep(0.500)
+
+    def _init(self):
+        # Initialize the display.
+
+        self.command(ST7789_SWRESET)    # Software reset
+        time.sleep(0.150)               # delay 150 ms
+
+        self.command(ST7789_MADCTL)
+        self.data(0x70)
+
+        self.command(ST7789_FRMCTR2)    # Frame rate ctrl - idle mode
+        self.data(0x0C)
+        self.data(0x0C)
+        self.data(0x00)
+        self.data(0x33)
+        self.data(0x33)
+
+        self.command(ST7789_COLMOD)
+        self.data(0x05)
+
+        self.command(ST7789_GCTRL)
+        self.data(0x14)
+
+        self.command(ST7789_VCOMS)
+        self.data(0x37)
+
+        self.command(ST7789_LCMCTRL)    # Power control
+        self.data(0x2C)
+
+        self.command(ST7789_VDVVRHEN)   # Power control
+        self.data(0x01)
+
+        self.command(ST7789_VRHS)       # Power control
+        self.data(0x12)
+
+        self.command(ST7789_VDVS)       # Power control
+        self.data(0x20)
+
+        self.command(0xD0)
+        self.data(0xA4)
+        self.data(0xA1)
+
+        self.command(ST7789_FRCTRL2)
+        self.data(0x0F)
+
+        self.command(ST7789_GMCTRP1)    # Set Gamma
+        self.data(0xD0)
+        self.data(0x04)
+        self.data(0x0D)
+        self.data(0x11)
+        self.data(0x13)
+        self.data(0x2B)
+        self.data(0x3F)
+        self.data(0x54)
+        self.data(0x4C)
+        self.data(0x18)
+        self.data(0x0D)
+        self.data(0x0B)
+        self.data(0x1F)
+        self.data(0x23)
+
+        self.command(ST7789_GMCTRN1)    # Set Gamma
+        self.data(0xD0)
+        self.data(0x04)
+        self.data(0x0C)
+        self.data(0x11)
+        self.data(0x13)
+        self.data(0x2C)
+        self.data(0x3F)
+        self.data(0x44)
+        self.data(0x51)
+        self.data(0x2F)
+        self.data(0x1F)
+        self.data(0x1F)
+        self.data(0x20)
+        self.data(0x23)
+
+        if self._invert:
+            self.command(ST7789_INVON)   # Invert display
+        else:
+            self.command(ST7789_INVOFF)  # Don't invert display
+
+        self.command(ST7789_SLPOUT)
+
+        self.command(ST7789_DISPON)     # Display on
+        time.sleep(0.100)               # 100 ms
+
+    def begin(self):
+        """Set up the display
+
+        Deprecated. Included in __init__.
+
+        """
+        pass
+
+    def set_window(self, x0=0, y0=0, x1=None, y1=None):
+        """Set the pixel address window for proceeding drawing commands. x0 and
+        x1 should define the minimum and maximum x pixel bounds.  y0 and y1
+        should define the minimum and maximum y pixel bound.  If no parameters
+        are specified the default will be to update the entire display from 0,0
+        to width-1,height-1.
+        """
+        if x1 is None:
+            x1 = self._width - 1
+
+        if y1 is None:
+            y1 = self._height - 1
+
+        y0 += self._offset_top
+        y1 += self._offset_top
+
+        x0 += self._offset_left
+        x1 += self._offset_left
+
+        self.command(ST7789_CASET)       # Column addr set
+        self.data(x0 >> 8)
+        self.data(x0 & 0xFF)             # XSTART
+        self.data(x1 >> 8)
+        self.data(x1 & 0xFF)             # XEND
+        self.command(ST7789_RASET)       # Row addr set
+        self.data(y0 >> 8)
+        self.data(y0 & 0xFF)             # YSTART
+        self.data(y1 >> 8)
+        self.data(y1 & 0xFF)             # YEND
+        self.command(ST7789_RAMWR)       # write to RAM
+
+    def display(self, image):
+        """Write the provided image to the hardware.
+
+        :param image: Should be RGB format and the same dimensions as the display hardware.
+
+        """
+        # Set address bounds to entire display.
+        self.set_window()
+
+        # Convert image to 16bit RGB565 format and
+        # flatten into bytes.
+        pixelbytes = self.image_to_data(image, self._rotation)
+
+        # Write data to hardware.
+        for i in range(0, len(pixelbytes), 4096):
+            self.data(pixelbytes[i:i + 4096])
+
+    def image_to_data(self, image, rotation=0):
+        if not isinstance(image, np.ndarray):
+            image = np.array(image.convert('RGB'))
+
+        # Rotate the image
+        pb = np.rot90(image, rotation // 90).astype('uint16')
+
+        # Mask and shift the 888 RGB into 565 RGB
+        red   = (pb[..., [0]] & 0xf8) << 8
+        green = (pb[..., [1]] & 0xfc) << 3
+        blue  = (pb[..., [2]] & 0xf8) >> 3
+
+        # Stick 'em together
+        result = red | green | blue
+
+        # Output the raw bytes
+        return result.byteswap().tobytes()

pwnagotchi/ui/hw/libs/pimoroni/pirateaudio/ST7789.py

@@ -0,0 +1,360 @@
+# Copyright (c) 2014 Adafruit Industries
+# Author: Tony DiCola
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+import numbers
+import time
+import numpy as np
+
+import spidev
+import RPi.GPIO as GPIO
+
+
+__version__ = '0.0.4'
+
+BG_SPI_CS_BACK = 0
+BG_SPI_CS_FRONT = 1
+
+SPI_CLOCK_HZ = 16000000
+
+ST7789_NOP = 0x00
+ST7789_SWRESET = 0x01
+ST7789_RDDID = 0x04
+ST7789_RDDST = 0x09
+
+ST7789_SLPIN = 0x10
+ST7789_SLPOUT = 0x11
+ST7789_PTLON = 0x12
+ST7789_NORON = 0x13
+
+ST7789_INVOFF = 0x20
+ST7789_INVON = 0x21
+ST7789_DISPOFF = 0x28
+ST7789_DISPON = 0x29
+
+ST7789_CASET = 0x2A
+ST7789_RASET = 0x2B
+ST7789_RAMWR = 0x2C
+ST7789_RAMRD = 0x2E
+
+ST7789_PTLAR = 0x30
+ST7789_MADCTL = 0x36
+ST7789_COLMOD = 0x3A
+
+ST7789_FRMCTR1 = 0xB1
+ST7789_FRMCTR2 = 0xB2
+ST7789_FRMCTR3 = 0xB3
+ST7789_INVCTR = 0xB4
+ST7789_DISSET5 = 0xB6
+
+ST7789_GCTRL = 0xB7
+ST7789_GTADJ = 0xB8
+ST7789_VCOMS = 0xBB
+
+ST7789_LCMCTRL = 0xC0
+ST7789_IDSET = 0xC1
+ST7789_VDVVRHEN = 0xC2
+ST7789_VRHS = 0xC3
+ST7789_VDVS = 0xC4
+ST7789_VMCTR1 = 0xC5
+ST7789_FRCTRL2 = 0xC6
+ST7789_CABCCTRL = 0xC7
+
+ST7789_RDID1 = 0xDA
+ST7789_RDID2 = 0xDB
+ST7789_RDID3 = 0xDC
+ST7789_RDID4 = 0xDD
+
+ST7789_GMCTRP1 = 0xE0
+ST7789_GMCTRN1 = 0xE1
+
+ST7789_PWCTR6 = 0xFC
+
+
+class ST7789(object):
+    """Representation of an ST7789 TFT LCD."""
+
+    def __init__(self, port, cs, dc, backlight, rst=None, width=240,
+                 height=240, rotation=0, invert=True, spi_speed_hz=60 * 1000 * 1000,
+                 offset_left=0,
+                 offset_top=0):
+        """Create an instance of the display using SPI communication.
+
+        Must provide the GPIO pin number for the D/C pin and the SPI driver.
+
+        Can optionally provide the GPIO pin number for the reset pin as the rst parameter.
+
+        :param port: SPI port number
+        :param cs: SPI chip-select number (0 or 1 for BCM
+        :param backlight: Pin for controlling backlight
+        :param rst: Reset pin for ST7789
+        :param width: Width of display connected to ST7789
+        :param height: Height of display connected to ST7789
+        :param rotation: Rotation of display connected to ST7789
+        :param invert: Invert display
+        :param spi_speed_hz: SPI speed (in Hz)
+
+        """
+        if rotation not in [0, 90, 180, 270]:
+            raise ValueError("Invalid rotation {}".format(rotation))
+
+        if width != height and rotation in [90, 270]:
+            raise ValueError("Invalid rotation {} for {}x{} resolution".format(rotation, width, height))
+
+        GPIO.setwarnings(False)
+        GPIO.setmode(GPIO.BCM)
+
+        self._spi = spidev.SpiDev(port, cs)
+        self._spi.mode = 0
+        self._spi.lsbfirst = False
+        self._spi.max_speed_hz = spi_speed_hz
+
+        self._dc = dc
+        self._rst = rst
+        self._width = width
+        self._height = height
+        self._rotation = rotation
+        self._invert = invert
+
+        self._offset_left = offset_left
+        self._offset_top = offset_top
+
+        # Set DC as output.
+        GPIO.setup(dc, GPIO.OUT)
+
+        # Setup backlight as output (if provided).
+        self._backlight = backlight
+        if backlight is not None:
+            GPIO.setup(backlight, GPIO.OUT)
+            GPIO.output(backlight, GPIO.LOW)
+            time.sleep(0.1)
+            GPIO.output(backlight, GPIO.HIGH)
+
+        # Setup reset as output (if provided).
+        if rst is not None:
+            GPIO.setup(self._rst, GPIO.OUT)
+            self.reset()
+        self._init()
+
+    def send(self, data, is_data=True, chunk_size=4096):
+        """Write a byte or array of bytes to the display. Is_data parameter
+        controls if byte should be interpreted as display data (True) or command
+        data (False).  Chunk_size is an optional size of bytes to write in a
+        single SPI transaction, with a default of 4096.
+        """
+        # Set DC low for command, high for data.
+        GPIO.output(self._dc, is_data)
+        # Convert scalar argument to list so either can be passed as parameter.
+        if isinstance(data, numbers.Number):
+            data = [data & 0xFF]
+        # Write data a chunk at a time.
+        for start in range(0, len(data), chunk_size):
+            end = min(start + chunk_size, len(data))
+            self._spi.xfer(data[start:end])
+
+    def set_backlight(self, value):
+        """Set the backlight on/off."""
+        if self._backlight is not None:
+            GPIO.output(self._backlight, value)
+
+    @property
+    def width(self):
+        return self._width if self._rotation == 0 or self._rotation == 180 else self._height
+
+    @property
+    def height(self):
+        return self._height if self._rotation == 0 or self._rotation == 180 else self._width
+
+    def command(self, data):
+        """Write a byte or array of bytes to the display as command data."""
+        self.send(data, False)
+
+    def data(self, data):
+        """Write a byte or array of bytes to the display as display data."""
+        self.send(data, True)
+
+    def reset(self):
+        """Reset the display, if reset pin is connected."""
+        if self._rst is not None:
+            GPIO.output(self._rst, 1)
+            time.sleep(0.500)
+            GPIO.output(self._rst, 0)
+            time.sleep(0.500)
+            GPIO.output(self._rst, 1)
+            time.sleep(0.500)
+
+    def _init(self):
+        # Initialize the display.
+
+        self.command(ST7789_SWRESET)    # Software reset
+        time.sleep(0.150)               # delay 150 ms
+
+        self.command(ST7789_MADCTL)
+        self.data(0x70)
+
+        self.command(ST7789_FRMCTR2)    # Frame rate ctrl - idle mode
+        self.data(0x0C)
+        self.data(0x0C)
+        self.data(0x00)
+        self.data(0x33)
+        self.data(0x33)
+
+        self.command(ST7789_COLMOD)
+        self.data(0x05)
+
+        self.command(ST7789_GCTRL)
+        self.data(0x14)
+
+        self.command(ST7789_VCOMS)
+        self.data(0x37)
+
+        self.command(ST7789_LCMCTRL)    # Power control
+        self.data(0x2C)
+
+        self.command(ST7789_VDVVRHEN)   # Power control
+        self.data(0x01)
+
+        self.command(ST7789_VRHS)       # Power control
+        self.data(0x12)
+
+        self.command(ST7789_VDVS)       # Power control
+        self.data(0x20)
+
+        self.command(0xD0)
+        self.data(0xA4)
+        self.data(0xA1)
+
+        self.command(ST7789_FRCTRL2)
+        self.data(0x0F)
+
+        self.command(ST7789_GMCTRP1)    # Set Gamma
+        self.data(0xD0)
+        self.data(0x04)
+        self.data(0x0D)
+        self.data(0x11)
+        self.data(0x13)
+        self.data(0x2B)
+        self.data(0x3F)
+        self.data(0x54)
+        self.data(0x4C)
+        self.data(0x18)
+        self.data(0x0D)
+        self.data(0x0B)
+        self.data(0x1F)
+        self.data(0x23)
+
+        self.command(ST7789_GMCTRN1)    # Set Gamma
+        self.data(0xD0)
+        self.data(0x04)
+        self.data(0x0C)
+        self.data(0x11)
+        self.data(0x13)
+        self.data(0x2C)
+        self.data(0x3F)
+        self.data(0x44)
+        self.data(0x51)
+        self.data(0x2F)
+        self.data(0x1F)
+        self.data(0x1F)
+        self.data(0x20)
+        self.data(0x23)
+
+        if self._invert:
+            self.command(ST7789_INVON)   # Invert display
+        else:
+            self.command(ST7789_INVOFF)  # Don't invert display
+
+        self.command(ST7789_SLPOUT)
+
+        self.command(ST7789_DISPON)     # Display on
+        time.sleep(0.100)               # 100 ms
+
+    def begin(self):
+        """Set up the display
+
+        Deprecated. Included in __init__.
+
+        """
+        pass
+
+    def set_window(self, x0=0, y0=0, x1=None, y1=None):
+        """Set the pixel address window for proceeding drawing commands. x0 and
+        x1 should define the minimum and maximum x pixel bounds.  y0 and y1
+        should define the minimum and maximum y pixel bound.  If no parameters
+        are specified the default will be to update the entire display from 0,0
+        to width-1,height-1.
+        """
+        if x1 is None:
+            x1 = self._width - 1
+
+        if y1 is None:
+            y1 = self._height - 1
+
+        y0 += self._offset_top
+        y1 += self._offset_top
+
+        x0 += self._offset_left
+        x1 += self._offset_left
+
+        self.command(ST7789_CASET)       # Column addr set
+        self.data(x0 >> 8)
+        self.data(x0 & 0xFF)             # XSTART
+        self.data(x1 >> 8)
+        self.data(x1 & 0xFF)             # XEND
+        self.command(ST7789_RASET)       # Row addr set
+        self.data(y0 >> 8)
+        self.data(y0 & 0xFF)             # YSTART
+        self.data(y1 >> 8)
+        self.data(y1 & 0xFF)             # YEND
+        self.command(ST7789_RAMWR)       # write to RAM
+
+    def display(self, image):
+        """Write the provided image to the hardware.
+
+        :param image: Should be RGB format and the same dimensions as the display hardware.
+
+        """
+        # Set address bounds to entire display.
+        self.set_window()
+
+        # Convert image to 16bit RGB565 format and
+        # flatten into bytes.
+        pixelbytes = self.image_to_data(image, self._rotation)
+
+        # Write data to hardware.
+        for i in range(0, len(pixelbytes), 4096):
+            self.data(pixelbytes[i:i + 4096])
+
+    def image_to_data(self, image, rotation=0):
+        if not isinstance(image, np.ndarray):
+            image = np.array(image.convert('RGB'))
+
+        # Rotate the image
+        pb = np.rot90(image, rotation // 90).astype('uint16')
+
+        # Mask and shift the 888 RGB into 565 RGB
+        red   = (pb[..., [0]] & 0xf8) << 8
+        green = (pb[..., [1]] & 0xfc) << 3
+        blue  = (pb[..., [2]] & 0xf8) >> 3
+
+        # Stick 'em together
+        result = red | green | blue
+
+        # Output the raw bytes
+        return result.byteswap().tobytes()

pwnagotchi/ui/hw/libs/waveshare/oledlcd/ST7789.py

@@ -0,0 +1,360 @@
+# Copyright (c) 2014 Adafruit Industries
+# Author: Tony DiCola
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to deal
+# in the Software without restriction, including without limitation the rights
+# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+# copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+# THE SOFTWARE.
+import numbers
+import time
+import numpy as np
+
+import spidev
+import RPi.GPIO as GPIO
+
+
+__version__ = '0.0.4'
+
+BG_SPI_CS_BACK = 0
+BG_SPI_CS_FRONT = 1
+
+SPI_CLOCK_HZ = 16000000
+
+ST7789_NOP = 0x00
+ST7789_SWRESET = 0x01
+ST7789_RDDID = 0x04
+ST7789_RDDST = 0x09
+
+ST7789_SLPIN = 0x10
+ST7789_SLPOUT = 0x11
+ST7789_PTLON = 0x12
+ST7789_NORON = 0x13
+
+ST7789_INVOFF = 0x20
+ST7789_INVON = 0x21
+ST7789_DISPOFF = 0x28
+ST7789_DISPON = 0x29
+
+ST7789_CASET = 0x2A
+ST7789_RASET = 0x2B
+ST7789_RAMWR = 0x2C
+ST7789_RAMRD = 0x2E
+
+ST7789_PTLAR = 0x30
+ST7789_MADCTL = 0x36
+ST7789_COLMOD = 0x3A
+
+ST7789_FRMCTR1 = 0xB1
+ST7789_FRMCTR2 = 0xB2
+ST7789_FRMCTR3 = 0xB3
+ST7789_INVCTR = 0xB4
+ST7789_DISSET5 = 0xB6
+
+ST7789_GCTRL = 0xB7
+ST7789_GTADJ = 0xB8
+ST7789_VCOMS = 0xBB
+
+ST7789_LCMCTRL = 0xC0
+ST7789_IDSET = 0xC1
+ST7789_VDVVRHEN = 0xC2
+ST7789_VRHS = 0xC3
+ST7789_VDVS = 0xC4
+ST7789_VMCTR1 = 0xC5
+ST7789_FRCTRL2 = 0xC6
+ST7789_CABCCTRL = 0xC7
+
+ST7789_RDID1 = 0xDA
+ST7789_RDID2 = 0xDB
+ST7789_RDID3 = 0xDC
+ST7789_RDID4 = 0xDD
+
+ST7789_GMCTRP1 = 0xE0
+ST7789_GMCTRN1 = 0xE1
+
+ST7789_PWCTR6 = 0xFC
+
+
+class ST7789(object):
+    """Representation of an ST7789 TFT LCD."""
+
+    def __init__(self, port, cs, dc, backlight, rst=None, width=320,
+                 height=240, rotation=180, invert=True, spi_speed_hz=60 * 1000 * 1000,
+                 offset_left=0,
+                 offset_top=0):
+        """Create an instance of the display using SPI communication.
+
+        Must provide the GPIO pin number for the D/C pin and the SPI driver.
+
+        Can optionally provide the GPIO pin number for the reset pin as the rst parameter.
+
+        :param port: SPI port number
+        :param cs: SPI chip-select number (0 or 1 for BCM
+        :param backlight: Pin for controlling backlight
+        :param rst: Reset pin for ST7789
+        :param width: Width of display connected to ST7789
+        :param height: Height of display connected to ST7789
+        :param rotation: Rotation of display connected to ST7789
+        :param invert: Invert display
+        :param spi_speed_hz: SPI speed (in Hz)
+
+        """
+        if rotation not in [0, 90, 180, 270]:
+            raise ValueError("Invalid rotation {}".format(rotation))
+
+        if width != height and rotation in [90, 270]:
+            raise ValueError("Invalid rotation {} for {}x{} resolution".format(rotation, width, height))
+
+        GPIO.setwarnings(False)
+        GPIO.setmode(GPIO.BCM)
+
+        self._spi = spidev.SpiDev(port, cs)
+        self._spi.mode = 0
+        self._spi.lsbfirst = False
+        self._spi.max_speed_hz = spi_speed_hz
+
+        self._dc = dc
+        self._rst = rst
+        self._width = width
+        self._height = height
+        self._rotation = rotation
+        self._invert = invert
+
+        self._offset_left = offset_left
+        self._offset_top = offset_top
+
+        # Set DC as output.
+        GPIO.setup(dc, GPIO.OUT)
+
+        # Setup backlight as output (if provided).
+        self._backlight = backlight
+        if backlight is not None:
+            GPIO.setup(backlight, GPIO.OUT)
+            GPIO.output(backlight, GPIO.LOW)
+            time.sleep(0.1)
+            GPIO.output(backlight, GPIO.HIGH)
+
+        # Setup reset as output (if provided).
+        if rst is not None:
+            GPIO.setup(self._rst, GPIO.OUT)
+            self.reset()
+        self._init()
+
+    def send(self, data, is_data=True, chunk_size=4096):
+        """Write a byte or array of bytes to the display. Is_data parameter
+        controls if byte should be interpreted as display data (True) or command
+        data (False).  Chunk_size is an optional size of bytes to write in a
+        single SPI transaction, with a default of 4096.
+        """
+        # Set DC low for command, high for data.
+        GPIO.output(self._dc, is_data)
+        # Convert scalar argument to list so either can be passed as parameter.
+        if isinstance(data, numbers.Number):
+            data = [data & 0xFF]
+        # Write data a chunk at a time.
+        for start in range(0, len(data), chunk_size):
+            end = min(start + chunk_size, len(data))
+            self._spi.xfer(data[start:end])
+
+    def set_backlight(self, value):
+        """Set the backlight on/off."""
+        if self._backlight is not None:
+            GPIO.output(self._backlight, value)
+
+    @property
+    def width(self):
+        return self._width if self._rotation == 0 or self._rotation == 180 else self._height
+
+    @property
+    def height(self):
+        return self._height if self._rotation == 0 or self._rotation == 180 else self._width
+
+    def command(self, data):
+        """Write a byte or array of bytes to the display as command data."""
+        self.send(data, False)
+
+    def data(self, data):
+        """Write a byte or array of bytes to the display as display data."""
+        self.send(data, True)
+
+    def reset(self):
+        """Reset the display, if reset pin is connected."""
+        if self._rst is not None:
+            GPIO.output(self._rst, 1)
+            time.sleep(0.500)
+            GPIO.output(self._rst, 0)
+            time.sleep(0.500)
+            GPIO.output(self._rst, 1)
+            time.sleep(0.500)
+
+    def _init(self):
+        # Initialize the display.
+
+        self.command(ST7789_SWRESET)    # Software reset
+        time.sleep(0.150)               # delay 150 ms
+
+        self.command(ST7789_MADCTL)
+        self.data(0x70)
+
+        self.command(ST7789_FRMCTR2)    # Frame rate ctrl - idle mode
+        self.data(0x0C)
+        self.data(0x0C)
+        self.data(0x00)
+        self.data(0x33)
+        self.data(0x33)
+
+        self.command(ST7789_COLMOD)
+        self.data(0x05)
+
+        self.command(ST7789_GCTRL)
+        self.data(0x14)
+
+        self.command(ST7789_VCOMS)
+        self.data(0x37)
+
+        self.command(ST7789_LCMCTRL)    # Power control
+        self.data(0x2C)
+
+        self.command(ST7789_VDVVRHEN)   # Power control
+        self.data(0x01)
+
+        self.command(ST7789_VRHS)       # Power control
+        self.data(0x12)
+
+        self.command(ST7789_VDVS)       # Power control
+        self.data(0x20)
+
+        self.command(0xD0)
+        self.data(0xA4)
+        self.data(0xA1)
+
+        self.command(ST7789_FRCTRL2)
+        self.data(0x0F)
+
+        self.command(ST7789_GMCTRP1)    # Set Gamma
+        self.data(0xD0)
+        self.data(0x04)
+        self.data(0x0D)
+        self.data(0x11)
+        self.data(0x13)
+        self.data(0x2B)
+        self.data(0x3F)
+        self.data(0x54)
+        self.data(0x4C)
+        self.data(0x18)
+        self.data(0x0D)
+        self.data(0x0B)
+        self.data(0x1F)
+        self.data(0x23)
+
+        self.command(ST7789_GMCTRN1)    # Set Gamma
+        self.data(0xD0)
+        self.data(0x04)
+        self.data(0x0C)
+        self.data(0x11)
+        self.data(0x13)
+        self.data(0x2C)
+        self.data(0x3F)
+        self.data(0x44)
+        self.data(0x51)
+        self.data(0x2F)
+        self.data(0x1F)
+        self.data(0x1F)
+        self.data(0x20)
+        self.data(0x23)
+
+        if self._invert:
+            self.command(ST7789_INVON)   # Invert display
+        else:
+            self.command(ST7789_INVOFF)  # Don't invert display
+
+        self.command(ST7789_SLPOUT)
+
+        self.command(ST7789_DISPON)     # Display on
+        time.sleep(0.100)               # 100 ms
+
+    def begin(self):
+        """Set up the display
+
+        Deprecated. Included in __init__.
+
+        """
+        pass
+
+    def set_window(self, x0=0, y0=0, x1=None, y1=None):
+        """Set the pixel address window for proceeding drawing commands. x0 and
+        x1 should define the minimum and maximum x pixel bounds.  y0 and y1
+        should define the minimum and maximum y pixel bound.  If no parameters
+        are specified the default will be to update the entire display from 0,0
+        to width-1,height-1.
+        """
+        if x1 is None:
+            x1 = self._width - 1
+
+        if y1 is None:
+            y1 = self._height - 1
+
+        y0 += self._offset_top
+        y1 += self._offset_top
+
+        x0 += self._offset_left
+        x1 += self._offset_left
+
+        self.command(ST7789_CASET)       # Column addr set
+        self.data(x0 >> 8)
+        self.data(x0 & 0xFF)             # XSTART
+        self.data(x1 >> 8)
+        self.data(x1 & 0xFF)             # XEND
+        self.command(ST7789_RASET)       # Row addr set
+        self.data(y0 >> 8)
+        self.data(y0 & 0xFF)             # YSTART
+        self.data(y1 >> 8)
+        self.data(y1 & 0xFF)             # YEND
+        self.command(ST7789_RAMWR)       # write to RAM
+
+    def display(self, image):
+        """Write the provided image to the hardware.
+
+        :param image: Should be RGB format and the same dimensions as the display hardware.
+
+        """
+        # Set address bounds to entire display.
+        self.set_window()
+
+        # Convert image to 16bit RGB565 format and
+        # flatten into bytes.
+        pixelbytes = self.image_to_data(image, self._rotation)
+
+        # Write data to hardware.
+        for i in range(0, len(pixelbytes), 4096):
+            self.data(pixelbytes[i:i + 4096])
+
+    def image_to_data(self, image, rotation=0):
+        if not isinstance(image, np.ndarray):
+            image = np.array(image.convert('RGB'))
+
+        # Rotate the image
+        pb = np.rot90(image, rotation // 90).astype('uint16')
+
+        # Mask and shift the 888 RGB into 565 RGB
+        red   = (pb[..., [0]] & 0xf8) << 8
+        green = (pb[..., [1]] & 0xfc) << 3
+        blue  = (pb[..., [2]] & 0xf8) >> 3
+
+        # Stick 'em together
+        result = red | green | blue
+
+        # Output the raw bytes
+        return result.byteswap().tobytes()

pwnagotchi/ui/hw/pirateaudio.py

@@ -0,0 +1,55 @@
+# board GPIO:
+# A: GPIO5
+# B: GPIO6
+# X: GPIO16
+# Y: GPIO20 / GPIO24 (refer to the pimoroni site or pinout.xyz)
+# I2S pins for the DAC: GPIO 18 GPIO19 GPIO21
+#
+# HW datasheet: https://shop.pimoroni.com/products/pirate-audio-line-out?variant=31189750546515
+# pinout xyz: https://pinout.xyz/pinout/pirate_audio_line_out
+
+import logging
+
+import pwnagotchi.ui.fonts as fonts
+from pwnagotchi.ui.hw.base import DisplayImpl
+
+
+class PirateAudio(DisplayImpl):
+    def __init__(self, config):
+        super(PirateAudio, self).__init__(config, 'pirateaudio')
+        self._display = None
+
+    def layout(self):
+        fonts.setup(10, 9, 10, 35, 25, 9)
+        self._layout['width'] = 240
+        self._layout['height'] = 240
+        self._layout['face'] = (0, 40)
+        self._layout['name'] = (5, 20)
+        self._layout['channel'] = (0, 0)
+        self._layout['aps'] = (28, 0)
+        self._layout['uptime'] = (175, 0)
+        self._layout['line1'] = [0, 14, 240, 14]
+        self._layout['line2'] = [0, 108, 240, 108]
+        self._layout['friend_face'] = (0, 92)
+        self._layout['friend_name'] = (40, 94)
+        self._layout['shakes'] = (0, 109)
+        self._layout['mode'] = (215, 109)
+        self._layout['status'] = {
+            'pos': (125, 20),
+            'font': fonts.status_font(fonts.Medium),
+            'max': 20
+        }
+
+
+        return self._layout
+
+    def initialize(self):
+        logging.info("Initializing PirateAudio - display only")
+        from pwnagotchi.ui.hw.libs.pimoroni.pirateaudio.ST7789 import ST7789
+        self._display = ST7789(0,1,9,13)
+
+    def render(self, canvas):
+        self._display.display(canvas.rotate(90))
+
+    def clear(self):
+        self._display.clear()

pwnagotchi/ui/hw/pitft.py

@@ -0,0 +1,62 @@
+# board GPIO:
+# Key1 (for2,8"): GPIO17
+# Key2 (for2,8"): GPIO22
+# Key3 (for2,8"): GPIO23
+# Key4 (for2,8"): GPIO27
+# Key5 (for2,4"): GPIO27
+#
+# Key1 (for2,4"): GPIO16
+# Key2 (for2,4"): GPIO13
+# Key3 (for2,4"): GPIO12
+# Key4 (for2,4"): GPIO6
+# Key5 (for2,4"): GPIO5
+#
+# Touch chipset: STMPE610
+# HW datasheet 2,8": https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/overview
+# HW datasheet 2,4": https://learn.adafruit.com/adafruit-2-4-pitft-hat-with-resistive-touchscreen-mini-kit/overview
+
+import logging
+
+import pwnagotchi.ui.fonts as fonts
+from pwnagotchi.ui.hw.base import DisplayImpl
+
+import os,time
+
+class Pitft(DisplayImpl):
+    def __init__(self, config):
+        super(Pitft, self).__init__(config, 'pitft')
+        self._display = None
+
+    def layout(self):
+        fonts.setup(12, 10, 12, 70, 25, 9)
+        self._layout['width'] = 320
+        self._layout['height'] = 240
+        self._layout['face'] = (0, 36)
+        self._layout['name'] = (150, 36)
+        self._layout['channel'] = (0, 0)
+        self._layout['aps'] = (40, 0)
+        self._layout['uptime'] = (240, 0)
+        self._layout['line1'] = [0, 14, 320, 14]
+        self._layout['line2'] = [0, 220, 320, 220]
+        self._layout['friend_face'] = (0, 130)
+        self._layout['friend_name'] = (40, 135)
+        self._layout['shakes'] = (0, 220)
+        self._layout['mode'] = (280, 220)
+        self._layout['status'] = {
+            'pos': (150, 48),
+            'font': fonts.status_font(fonts.Medium),
+            'max': 20
+        }
+
+        return self._layout
+
+    def initialize(self):
+        logging.info("Initializing adafruit pitft 320x240 screen")
+        from pwnagotchi.ui.hw.libs.adafruit.pitft.ILI9341 import ILI9341
+        self._display = ILI9341(0,0,25,18)
+
+    def render(self, canvas):
+        self._display.display(canvas)
+
+    def clear(self):
+        self._display.clear()

pwnagotchi/ui/hw/tftbonnet.py

@@ -0,0 +1,54 @@
+# board GPIO:
+# UP:       GPIO17
+# DOWN:     GPIO22
+# LEFT:     GPIO27
+# RIGHT:    GPIO23
+# CENTER:   GPIO4
+# A:        GPIO5
+# B:        GPIO6
+#
+# HW datasheet: https://learn.adafruit.com/adafruit-1-3-color-tft-bonnet-for-raspberry-pi/overview
+
+import logging
+
+import pwnagotchi.ui.fonts as fonts
+from pwnagotchi.ui.hw.base import DisplayImpl
+
+
+class TftBonnet(DisplayImpl):
+    def __init__(self, config):
+        super(TftBonnet, self).__init__(config, 'tftbonnet')
+
+    def layout(self):
+        fonts.setup(10, 9, 10, 35, 25, 9)
+        self._layout['width'] = 240
+        self._layout['height'] = 240
+        self._layout['face'] = (0, 40)
+        self._layout['name'] = (5, 20)
+        self._layout['channel'] = (0, 0)
+        self._layout['aps'] = (28, 0)
+        self._layout['uptime'] = (175, 0)
+        self._layout['line1'] = [0, 14, 240, 14]
+        self._layout['line2'] = [0, 108, 240, 108]
+        self._layout['friend_face'] = (0, 92)
+        self._layout['friend_name'] = (40, 94)
+        self._layout['shakes'] = (0, 109)
+        self._layout['mode'] = (215, 109)
+        self._layout['status'] = {
+            'pos': (125, 20),
+            'font': fonts.status_font(fonts.Medium),
+            'max': 20
+        }
+
+        return self._layout
+
+    def initialize(self):
+        logging.info("initializing Adafruit Tft Bonnet")
+        from pwnagotchi.ui.hw.libs.adafruit.tftbonnet.ST7789 import ST7789
+        self._display = ST7789(0,0,25,26)
+
+    def render(self, canvas):
+        self._display.display(canvas)
+
+    def clear(self):
+        self._display.clear()

pwnagotchi/ui/hw/waveshareoledlcd.py

@@ -0,0 +1,59 @@
+# workinprogress based on the displayhatmini driver
+# LCD support OK
+# OLED support ongoing
+# board GPIO:
+# Key1: GPIO4 / pin7
+# Key2: GPIO17 / pin11
+# Key3: GPIO23 / pin16
+# Key4: GPIO24 / pin18
+# OLED SDA: GPIO2 / pin3 
+# OLED SCL: GPIO3 / pin5
+# OLED info: 
+# driver: SSD1315 (I2C)
+# resolution: 128x64
+# I2C address: 0x3C 0x3D
+# HW datasheet: https://www.waveshare.com/wiki/OLED/LCD_HAT_(A)
+
+import logging
+
+import pwnagotchi.ui.fonts as fonts
+from pwnagotchi.ui.hw.base import DisplayImpl
+
+
+class Waveshareoledlcd(DisplayImpl):
+    def __init__(self, config):
+        super(Waveshareoledlcd, self).__init__(config, 'waveshareoledlcd')
+
+    def layout(self):
+        fonts.setup(12, 10, 12, 70, 25, 9)
+        self._layout['width'] = 320
+        self._layout['height'] = 240
+        self._layout['face'] = (0, 36)
+        self._layout['name'] = (150, 36)
+        self._layout['channel'] = (0, 0)
+        self._layout['aps'] = (40, 0)
+        self._layout['uptime'] = (240, 0)
+        self._layout['line1'] = [0, 14, 320, 14]
+        self._layout['line2'] = [0, 220, 320, 220]
+        self._layout['friend_face'] = (0, 130)
+        self._layout['friend_name'] = (40, 135)
+        self._layout['shakes'] = (0, 220)
+        self._layout['mode'] = (280, 220)
+        self._layout['status'] = {
+            'pos': (150, 48),
+            'font': fonts.status_font(fonts.Medium),
+            'max': 20
+        }
+
+        return self._layout
+
+    def initialize(self):
+        logging.info("initializing Waveshare OLED/LCD hat")
+        from pwnagotchi.ui.hw.libs.waveshare.oledlcd.ST7789 import ST7789
+        self._display = ST7789(0,0,22,18)
+
+    def render(self, canvas):
+        self._display.display(canvas)
+
+    def clear(self):
+        self._display.clear()

pwnagotchi/utils.py

@@ -266,6 +266,18 @@ def load_config(args):
     elif config['ui']['display']['type'] in ('displayhatmini'):
         config['ui']['display']['type'] = 'displayhatmini'
 
+    elif config['ui']['display']['type'] in ('pirateaudio'):
+        config['ui']['display']['type'] = 'pirateaudio'
+
+    elif config['ui']['display']['type'] in ('pitft'):
+        config['ui']['display']['type'] = 'pitft'
+
+    elif config['ui']['display']['type'] in ('tftbonnet'):
+        config['ui']['display']['type'] = 'tftbonnet'
+
+    elif config['ui']['display']['type'] in ('waveshareoledlcd'):
+        config['ui']['display']['type'] = 'waveshareoledlcd'
+
     elif config['ui']['display']['type'] in ('waveshare35lcd'):
         config['ui']['display']['type'] = 'waveshare35lcd'