diff --git a/sdcard/boot/cmdline.txt b/sdcard/boot/cmdline.txt deleted file mode 100755 index 6c44ae32..00000000 --- a/sdcard/boot/cmdline.txt +++ /dev/null @@ -1 +0,0 @@ -dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether diff --git a/sdcard/boot/config.txt b/sdcard/boot/config.txt deleted file mode 100755 index 4d69af8d..00000000 --- a/sdcard/boot/config.txt +++ /dev/null @@ -1,1202 +0,0 @@ -################################################################################ -## Raspberry Pi Configuration Settings -## -## Revision 17, 2018/04/22 -## -## Details taken from the eLinux wiki -## For up-to-date information please refer to wiki page. -## -## Wiki Location : http://elinux.org/RPiconfig -## -## -## Description: -## Details of each setting are described with each section that begins with -## a double hashed comment ('##') -## It is up to the user to remove the single hashed comment ('#') from each -## option they want to enable, and to set the specific value of that option. -## -## Overclock settings will be disabled at runtime if the SoC reaches temp_limit -## -## Originally based off https://github.com/Evilpaul/RPi-config/ with minor -## update because display_rotate is deprecated. -## -################################################################################ - -################################################################################ -## Standard Definition Video Settings -################################################################################ - -## sdtv_mode -## defines the TV standard for composite output -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Normal NTSC (Default) -## 1 Japanese version of NTSC - no pedestal -## 2 Normal PAL -## 3 Brazilian version of PAL - 525/60 rather than 625/50, different -## subcarrier -## -#sdtv_mode=0 - -## sdtv_aspect -## defines the aspect ratio for composite output -## -## Value Description -## ------------------------------------------------------------------------- -## 1 4:3 (Default) -## 2 14:9 -## 3 16:9 -## -#sdtv_aspect=1 - -## sdtv_disable_colourburst -## Disables colour burst on composite output. The picture will be -## monochrome, but possibly sharper -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Colour burst is enabled (Default) -## 1 Colour burst is disabled -## -#sdtv_disable_colourburst=1 - -################################################################################ -## High Definition Video Settings -################################################################################ - -## hdmi_safe -## Use "safe mode" settings to try to boot with maximum hdmi compatibility. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Disabled (Default) -## 1 Enabled (this does: hdmi_force_hotplug=1, -## hdmi_ignore_edid=0xa5000080, -## config_hdmi_boost=4, hdmi_group=2, -## hdmi_mode=4, disable_overscan=0, -## overscan_left=24, overscan_right=24, -## overscan_top=24, overscan_bottom=24) -## -#hdmi_safe=1 - -## hdmi_force_hotplug -## Pretends HDMI hotplug signal is asserted so it appears a HDMI display -## is attached -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Disabled (Default) -## 1 Use HDMI mode even if no HDMI monitor is detected -## -#hdmi_force_hotplug=1 - -## hdmi_ignore_hotplug -## Pretends HDMI hotplug signal is not asserted so it appears a HDMI -## display is not attached -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Disabled (Default) -## 1 Use composite mode even if HDMI monitor is detected -## -#hdmi_ignore_hotplug=1 - -## hdmi_drive -## chooses between HDMI and DVI modes -## -## Value Description -## ------------------------------------------------------------------------- -## 1 Normal DVI mode (No sound) -## 2 Normal HDMI mode (Sound will be sent if supported and enabled) -## -#hdmi_drive=2 - -## hdmi_ignore_edid -## Enables the ignoring of EDID/display data -## -#hdmi_ignore_edid=0xa5000080 - -## hdmi_edid_file -## Read the EDID data from the edid.dat file instead of from the attached -## device -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Read EDID data from attached device (Default) -## 1 Read EDID data from edid.txt file -## -#hdmi_edid_file=1 - -## hdmi_ignore_edid_audio -## Pretends all audio formats are unsupported by display. This means ALSA -## will default to analogue. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use EDID provided values (Default) -## 1 Pretend all audio formats are unsupported -## -#hdmi_ignore_edid_audio=1 - -## hdmi_force_edid_audio -## Pretends all audio formats are supported by display, allowing -## passthrough of DTS/AC3 even when not reported as supported. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use EDID provided values (Default) -## 1 Pretend all audio formats are supported -## -#hdmi_force_edid_audio=1 - -## hdmi_force_edid_3d -## Pretends all CEA modes support 3D even when edid doesn't indicate -## support for them. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use EDID provided values (Default) -## 1 Pretend 3D mode is supported -## -#hdmi_force_edid_3d=1 - -## avoid_edid_fuzzy_match -## Avoid fuzzy matching of modes described in edid. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use fuzzy matching (Default) -## 1 Avoid fuzzy matching -## -#avoid_edid_fuzzy_match=1 - -## hdmi_pixel_encoding -## Force the pixel encoding mode. -## By default it will use the mode requested from edid so shouldn't -## need changing. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use EDID provided values (Default) -## 1 RGB limited (16-235) -## 2 RGB full ( 0-255) -## 3 YCbCr limited (16-235) -## 4 YCbCr limited ( 0-255) -## -#hdmi_pixel_encoding=1 - -## hdmi_group -## Defines the HDMI type -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Use the preferred group reported by the edid (Default) -## 1 CEA -## 2 DMT -## -#hdmi_group=1 - -## hdmi_mode -## defines screen resolution in CEA or DMT format -## -## H means 16:9 variant (of a normally 4:3 mode). -## 2x means pixel doubled (i.e. higher clock rate, with each pixel repeated -## twice) -## 4x means pixel quadrupled (i.e. higher clock rate, with each pixel -## repeated four times) -## reduced blanking means fewer bytes are used for blanking within the data -## stream (i.e. lower clock rate, with fewer wasted bytes) -## -## Value hdmi_group=CEA hdmi_group=DMT -## ------------------------------------------------------------------------- -## 1 VGA 640x350 85Hz -## 2 480p 60Hz 640x400 85Hz -## 3 480p 60Hz H 720x400 85Hz -## 4 720p 60Hz 640x480 60Hz -## 5 1080i 60Hz 640x480 72Hz -## 6 480i 60Hz 640x480 75Hz -## 7 480i 60Hz H 640x480 85Hz -## 8 240p 60Hz 800x600 56Hz -## 9 240p 60Hz H 800x600 60Hz -## 10 480i 60Hz 4x 800x600 72Hz -## 11 480i 60Hz 4x H 800x600 75Hz -## 12 240p 60Hz 4x 800x600 85Hz -## 13 240p 60Hz 4x H 800x600 120Hz -## 14 480p 60Hz 2x 848x480 60Hz -## 15 480p 60Hz 2x H 1024x768 43Hz DO NOT USE -## 16 1080p 60Hz 1024x768 60Hz -## 17 576p 50Hz 1024x768 70Hz -## 18 576p 50Hz H 1024x768 75Hz -## 19 720p 50Hz 1024x768 85Hz -## 20 1080i 50Hz 1024x768 120Hz -## 21 576i 50Hz 1152x864 75Hz -## 22 576i 50Hz H 1280x768 reduced blanking -## 23 288p 50Hz 1280x768 60Hz -## 24 288p 50Hz H 1280x768 75Hz -## 25 576i 50Hz 4x 1280x768 85Hz -## 26 576i 50Hz 4x H 1280x768 120Hz reduced blanking -## 27 288p 50Hz 4x 1280x800 reduced blanking -## 28 288p 50Hz 4x H 1280x800 60Hz -## 29 576p 50Hz 2x 1280x800 75Hz -## 30 576p 50Hz 2x H 1280x800 85Hz -## 31 1080p 50Hz 1280x800 120Hz reduced blanking -## 32 1080p 24Hz 1280x960 60Hz -## 33 1080p 25Hz 1280x960 85Hz -## 34 1080p 30Hz 1280x960 120Hz reduced blanking -## 35 480p 60Hz 4x 1280x1024 60Hz -## 36 480p 60Hz 4x H 1280x1024 75Hz -## 37 576p 50Hz 4x 1280x1024 85Hz -## 38 576p 50Hz 4x H 1280x1024 120Hz reduced blanking -## 39 1080i 50Hz reduced blanking 1360x768 60Hz -## 40 1080i 100Hz 1360x768 120Hz reduced blanking -## 41 720p 100Hz 1400x1050 reduced blanking -## 42 576p 100Hz 1400x1050 60Hz -## 43 576p 100Hz H 1400x1050 75Hz -## 44 576i 100Hz 1400x1050 85Hz -## 45 576i 100Hz H 1400x1050 120Hz reduced blanking -## 46 1080i 120Hz 1440x900 reduced blanking -## 47 720p 120Hz 1440x900 60Hz -## 48 480p 120Hz 1440x900 75Hz -## 49 480p 120Hz H 1440x900 85Hz -## 50 480i 120Hz 1440x900 120Hz reduced blanking -## 51 480i 120Hz H 1600x1200 60Hz -## 52 576p 200Hz 1600x1200 65Hz -## 53 576p 200Hz H 1600x1200 70Hz -## 54 576i 200Hz 1600x1200 75Hz -## 55 576i 200Hz H 1600x1200 85Hz -## 56 480p 240Hz 1600x1200 120Hz reduced blanking -## 57 480p 240Hz H 1680x1050 reduced blanking -## 58 480i 240Hz 1680x1050 60Hz -## 59 480i 240Hz H 1680x1050 75Hz -## 60 1680x1050 85Hz -## 61 1680x1050 120Hz reduced blanking -## 62 1792x1344 60Hz -## 63 1792x1344 75Hz -## 64 1792x1344 120Hz reduced blanking -## 65 1856x1392 60Hz -## 66 1856x1392 75Hz -## 67 1856x1392 120Hz reduced blanking -## 68 1920x1200 reduced blanking -## 69 1920x1200 60Hz -## 70 1920x1200 75Hz -## 71 1920x1200 85Hz -## 72 1920x1200 120Hz reduced blanking -## 73 1920x1440 60Hz -## 74 1920x1440 75Hz -## 75 1920x1440 120Hz reduced blanking -## 76 2560x1600 reduced blanking -## 77 2560x1600 60Hz -## 78 2560x1600 75Hz -## 79 2560x1600 85Hz -## 80 2560x1600 120Hz reduced blanking -## 81 1366x768 60Hz -## 82 1080p 60Hz -## 83 1600x900 reduced blanking -## 84 2048x1152 reduced blanking -## 85 720p 60Hz -## 86 1366x768 reduced blanking -## -#hdmi_mode=1 - -## config_hdmi_boost -## configure the signal strength of the HDMI interface. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 (Default) -## 1 -## 2 -## 3 -## 4 Try if you have interference issues with HDMI -## 5 -## 6 -## 7 Maximum -## -#config_hdmi_boost=0 - -## hdmi_ignore_cec_init -## Doesn't sent initial active source message. Avoids bringing -## (CEC enabled) TV out of standby and channel switch when rebooting. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Normal behaviour (Default) -## 1 Doesn't sent initial active source message -## -#hdmi_ignore_cec_init=1 - -## hdmi_ignore_cec -## Pretends CEC is not supported at all by TV. -## No CEC functions will be supported. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Normal behaviour (Default) -## 1 Pretend CEC is not supported by TV -## -#hdmi_ignore_cec=1 - -################################################################################ -## Overscan Video Settings -################################################################################ - -## overscan_left -## Number of pixels to skip on left -## -#overscan_left=0 - -## overscan_right -## Number of pixels to skip on right -## -#overscan_right=0 - -## overscan_top -## Number of pixels to skip on top -## -#overscan_top=0 - -## overscan_bottom -## Number of pixels to skip on bottom -## -#overscan_bottom=0 - -## disable_overscan -## Set to 1 to disable overscan -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Overscan Enabled (Default) -## 1 Overscan Disabled -## -#disable_overscan=1 - -################################################################################ -## Framebuffer Video Settings -################################################################################ - -## framebuffer_width -## Console framebuffer width in pixels. Default is display width minus -## overscan. -## -#framebuffer_width=0 - -## framebuffer_height -## Console framebuffer height in pixels. Default is display height minus -## overscan. -## -#framebuffer_height=0 - -## framebuffer_depth -## Console framebuffer depth in bits per pixel. -## -## Value Description -## ------------------------------------------------------------------------- -## 8 Valid, but default RGB palette makes an unreadable screen -## 16 (Default) -## 24 Looks better but has corruption issues as of 2012/06/15 -## 32 Has no corruption issues but needs framebuffer_ignore_alpha=1 -## and shows the wrong colors as of 2012/06/15 -## -#framebuffer_depth=16 - -## framebuffer_ignore_alpha -## Set to 1 to disable alpha channel. Helps with 32bit. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Enable Alpha Channel (Default) -## 1 Disable Alpha Channel -## -#framebuffer_ignore_alpha=0 - -################################################################################ -## General Video Settings -################################################################################ - -## display_rotate -## Rotate the display clockwise or flip the display. -## The 90 and 270 degrees rotation options require additional memory on GPU, -## so won't work with the 16M GPU split. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 0 degrees (Default) -## 1 90 degrees -## 2 180 degrees -## 3 270 degrees -## 0x10000 Horizontal flip -## 0x20000 Vertical flip -## -## Note: latest firmware deprecates display_rotate so use these instead. -#display_hdmi_rotate=0 -#display_lcd_rotate=0 - -## dispmanx_offline -## Set to "1" to enable offline compositing -## -## Default 0 -## -#dispmanx_offline=0 - -################################################################################ -## Licensed Codecs -## -## Hardware decoding of additional codecs can be enabled by purchasing a -## license that is locked to the CPU serial number of your Raspberry Pi. -## -## Up to 8 licenses per CODEC can be specified as a comma seperated list. -## -################################################################################ - -## decode_MPG2 -## License key to allow hardware MPEG-2 decoding. -## -#decode_MPG2=0x12345678 - -## decode_WVC1 -## License key to allow hardware VC-1 decoding. -## -#decode_WVC1=0x12345678 - -################################################################################ -## Camera Settings -################################################################################ - -## start_x -## Set to "1" to enable the camera module. -## -## Enabling the camera requires gpu_mem option to be specified with a value -## of at least 128. -## -## Default 0 -## -#start_x=0 - -## disable_camera_led -## Turn off the red camera led when recording video or taking a still -## picture. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 LED enabled (Default) -## 1 LED disabled -## -#disable_camera_led=1 - -################################################################################ -## Test Settings -################################################################################ - -## test_mode -## Enable test sound/image during boot for manufacturing test. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Disable Test Mod (Default) -## 1 Enable Test Mode -## -#test_mode=0 - -################################################################################ -## Memory Settings -################################################################################ - -## disable_l2cache -## Disable arm access to GPU's L2 cache. Needs corresponding L2 disabled -## kernel. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Enable L2 Cache (Default) -## 1 Disable L2 cache -## -#disable_l2cache=0 - -## gpu_mem -## GPU memory allocation in MB for all board revisions. -## -## Default 64 -## -#gpu_mem=128 - -## gpu_mem_256 -## GPU memory allocation in MB for 256MB board revision. -## This option overrides gpu_mem. -## -#gpu_mem_256=192 - -## gpu_mem_512 -## GPU memory allocation in MB for 512MB board revision. -## This option overrides gpu_mem. -## -#gpu_mem_512=448 - -## gpu_mem_1024 -## GPU memory allocation in MB for 1024MB board revision. -## This option overrides gpu_mem. -## -#gpu_mem_1024=944 - -## disable_pvt -## Disable adjusting the refresh rate of RAM every 500ms -## (measuring RAM temparature). -## -#disable_pvt=1 - -################################################################################ -## CMA - Dynamic Memory Split -## -## CMA enables dynamic management of the ARM and GPU memory split at runtime. -## -## The following options need to be in cmdline.txt for CMA to work: -## coherent_pool=6M smsc95xx.turbo_mode=N -## -################################################################################ - -## cma_lwm -## When GPU has less than cma_lwm (low water mark) memory available it -## will request some from ARM. -## -#cma_lwm=16 - -## cma_hwm -## When GPU has more than cma_hwm (high water mark) memory available it -## will release some to ARM. -## -#cma_hwm=32 - -################################################################################ -## Boot Option Settings -################################################################################ - -## disable_commandline_tags -## Stop start.elf from filling in ATAGS (memory from 0x100) before -## launching kernel -## -#disable_commandline_tags=0 - -## cmdline (string) -## Command line parameters. Can be used instead of cmdline.txt file -## -#cmdline="" - -## kernel (string) -## Alternative name to use when loading kernel. -## -#kernel="" - -## kernel_address -## Address to load kernel.img file at -## -#kernel_address=0x00000000 - -## kernel_old -## Support loading old kernels -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Disabled (Default) -## 1 Load kernel at address 0x00000000 -## -#kernel_old=1 - -## ramfsfile (string) -## ramfs file to load -## -#ramfsfile="" - -## ramfsaddr -## Address to load ramfs file at -## -#ramfsaddr=0x00000000 - -## initramfs (string address) -## ramfs file and address to load it at (it's like ramfsfile+ramfsaddr in -## one option). -## -## NOTE: this option uses different syntax than all other options - you -## should not use "=" character here. -## -#initramfs initramf.gz 0x00800000 - -## device_tree_address -## Address to load device_tree at -## -#device_tree_address=0x00000000 - -## init_uart_baud -## Initial uart baud rate. -## -## Default 115200 -## -#init_uart_baud=115200 - -## init_uart_clock -## Initial uart clock. -## -## Default 3000000 (3MHz) -## -#init_uart_clock=3000000 - -## init_emmc_clock -## Initial emmc clock, increasing this can speedup your SD-card. -## -## Default 100000000 (100mhz) -## -#init_emmc_clock=100000000 - -## boot_delay -## Wait for a given number of seconds in start.elf before loading -## kernel.img. -## -## delay = (1000 * boot_delay) + boot_delay_ms -## -## Default 1 -## -#boot_delay=0 - -## boot_delay_ms -## Wait for a given number of milliseconds in start.elf before loading -## kernel.img. -## -## delay = (1000 * boot_delay) + boot_delay_ms -## -## Default 0 -## -#boot_delay_ms=0 - -## avoid_safe_mode -## Adding a jumper between pins 5 & 6 of P1 enables a recovery Safe Mode. -## If pins 5 & 6 are used for connecting to external devices (e.g. GPIO), -## then this setting can be used to ensure Safe Mode is not triggered. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Respect Safe Mode input (Default) -## 1 Ignore Safe Mode input -## -#avoid_safe_mode=1 - -## disable_splash -## Avoids the rainbow splash screen on boot. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Splash screen enabled (Default) -## 1 Splash screen disabled -## -#disable_splash=1 - -################################################################################ -## Overclocking Settings -## -## ARM, SDRAM and GPU each have their own PLLs and can have unrelated -## frequencies. -## -## The GPU core, h264, v3d and isp share a PLL, so need to have related -## frequencies. -## pll_freq = floor(2400 / (2 * core_freq)) * (2 * core_freq) -## gpu_freq = pll_freq / [even number] -## -## The effective gpu_freq is automatically rounded to nearest even integer, so -## asking for core_freq = 500 and gpu_freq = 300 will result in divisor of -## 2000/300 = 6.666 => 6 and so 333.33MHz. -## -## -## Standard Profiles: -## arm_freq core_freq sdram_freq over_voltage -## ------------------------------------------------------------------------- -## None 700 250 400 0 -## Modest 800 300 400 0 -## Medium 900 333 450 2 -## High 950 450 450 6 -## Turbo 1000 500 500 6 -## -################################################################################ - -## force_turbo -## Control the kernel "ondemand" governor. It has no effect if no overclock -## settings are specified. -## May set warrany bit. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Enable dynamic clocks and voltage for the ARM core, GPU core and -## SDRAM (Default). -## Overclocking of h264_freq, v3d_freq and isp_freq is ignored. -## 1 Disable dynamic clocks and voltage for the ARM core, GPU core -## and SDRAM. -## Overclocking of h264_freq, v3d_freq and isp_freq is allowed. -## -#force_turbo=0 - -## initial_turbo -## Enables turbo mode from boot for the given value in seconds (up to 60) -## or until cpufreq sets a frequency. Can help with sdcard corruption if -## overclocked. -## -## Default 0 -## -#initial_turbo=0 - -## temp_limit -## Overheat protection. Sets clocks and voltages to default when the SoC -## reaches this Celsius value. -## Setting this higher than default voids warranty. -## -## Default 85 -## -#temp_limit=85 - -## arm_freq -## Frequency of ARM in MHz. -## -## Default 700. -## -#arm_freq=700 - -## arm_freq_min -## Minimum frequency of ARM in MHz (used for dynamic clocking). -## -## Default 700. -## -#arm_freq_min=700 - -## gpu_freq -## Sets core_freq, h264_freq, isp_freq, v3d_freq together. -## -## Default 250. -## -#gpu_freq=250 - -## core_freq -## Frequency of GPU processor core in MHz. It has an impact on ARM -## performance since it drives L2 cache. -## -## Default 250. -## -#core_freq=250 - -## core_freq_min -## Minimum frequency of GPU processor core in MHz (used for dynamic -## clocking). It has an impact on ARM performance since it drives L2 cache. -## -## Default 250. -## -#core_freq_min=250 - -## h264_freq -## Frequency of hardware video block in MHz. -## -## Default 250. -## -#h264_freq=250 - -## isp_freq -## Frequency of image sensor pipeline block in MHz. -## -## Default 250. -## -#isp_freq=250 - -## v3d_freq -## Frequency of 3D block in MHz. -## -## Default 250. -## -#v3d_freq=250 - -## sdram_freq -## Frequency of SDRAM in MHz. -## -## Default 400. -## -#sdram_freq=400 - -## sdram_freq_min -## Minimum frequency of SDRAM in MHz (used for dynamic clocking). -## -## Default 400. -## -#sdram_freq_min=400 - -## avoid_pwm_pll -## Don't dedicate a pll to PWM audio. This will reduce analogue audio -## quality slightly. The spare PLL allows the core_freq to be set -## independently from the rest of the gpu allowing more control over -## overclocking. -## -## Value Description -## ------------------------------------------------------------------------- -## 0 Linked core_freq (Default) -## 1 Unlinked core_freq -## -#avoid_pwm_pll=1 - -################################################################################ -## Voltage Settings -################################################################################ - -## current_limit_override -## Disables SMPS current limit protection. Can help if you are currently -## hitting a reboot failure when overclocking too high. -## May set warrany bit. -## -#current_limit_override=0x5A000020 - -## over_voltage -## ARM/GPU core voltage adjust. -## May set warrany bit. -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V (requires force_turbo=1 or current_limit_override) -## 8 1.4 V (requires force_turbo=1 or current_limit_override) -## -#over_voltage=0 - -## over_voltage_min -## Minimum ARM/GPU core voltage adjust (used for dynamic clocking). -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V (requires force_turbo=1) -## 8 1.4 V (requires force_turbo=1) -## -#over_voltage_min=0 - -## over_voltage_sdram -## Sets over_voltage_sdram_c, over_voltage_sdram_i, over_voltage_sdram_p -## together -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V -## 8 1.4 V -## -#over_voltage_sdram=0 - -## over_voltage_sdram_c -## SDRAM controller voltage adjust. -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V -## 8 1.4 V -## -#over_voltage_sdram_c=0 - -## over_voltage_sdram_i -## SDRAM I/O voltage adjust. -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V -## 8 1.4 V -## -#over_voltage_sdram_i=0 - -## over_voltage_sdram_p -## SDRAM phy voltage adjust. -## -## Value Description -## ------------------------------------------------------------------------- -## -16 0.8 V -## -15 0.825 V -## -14 0.85 V -## -13 0.875 V -## -12 0.9 V -## -11 0.925 V -## -10 0.95 V -## -9 0.975 V -## -8 1.0 V -## -7 1.025 V -## -6 1.05 V -## -5 1.075 V -## -4 1.1 V -## -3 1.125 V -## -2 1.15 V -## -1 1.175 V -## 0 1.2 V (Default) -## 1 1.225 V -## 2 1.25 V -## 3 1.275 V -## 4 1.3 V -## 5 1.325 V -## 6 1.35 V -## 7 1.375 V -## 8 1.4 V -## -#over_voltage_sdram_p=0 - -################################################################################ -## USB Power -################################################################################ - -## max_usb_current -## When set to 1, change the output current limit (for all 4 USB -## ports combined) from 600mA to double that, 1200mA. -## -## This option is not available for Model A/B boards. -## -## Default 0. -## -#max_usb_current=0 - -################################################################################ -## Base Device Tree Parameters -################################################################################ - -## audio -## Enable the onboard ALSA audio -## -## Default off. -## -#dtparam=audio=off - -## i2c_arm -## Enable the ARM's i2c interface -## -## Default off. -## -#dtparam=i2c_arm=off - -## i2c_vc -## Enable the i2c interface -## -## Usually reserved for the VideoCore processor -## -## Default off. -## -#dtparam=i2c_vc=off - -## i2c_arm_baudrate -## Set the baudrate of the ARM's i2c interface -## -## Default 100000. -## -#dtparam=i2c_arm_baudrate=100000 - -## i2c_vc_baudrate -## Set the baudrate of the VideoCore i2c interface -## -## Default 100000. -## -#dtparam=i2c_vc_baudrate=100000 - -## i2s -## Set to "on" to enable the i2s interface -## -## Default off. -## -#dtparam=i2s=off - -## spi -## Set to "on" to enable the spi interfaces -## -## Default off. -## -#dtparam=spi=off - -## random -## Set to "on" to enable the hardware random -## -## Default off. -## -#dtparam=random=off - -## uart0 -## Set to "off" to disable uart0 -## -## Default on. -## -#dtparam=uart0=on - -## watchdog -## Set to "on" to enable the hardware watchdog -## -## Default off. -## -#dtparam=watchdog=off - -## act_led_trigger -## Choose which activity the LED tracks. -## -## Use "heartbeat" for a nice load indicator. -## -## Default mmc. -## -#dtparam=act_led_trigger=mmc - -## act_led_activelow -## Set to "on" to invert the sense of the LED -## -## Default off. -## -#dtparam=act_led_activelow=off - -## act_led_gpio -## Set which GPIO to use for the activity LED -## -## In case you want to connect it to an external device -## -## Default 16 on a non-Plus board, 47 on a Plus or Pi 2. -## -#dtparam=act_led_gpio=47 - -## pwr_led_trigger -## Choose which activity the LED tracks. -## -## Use "heartbeat" for a nice load indicator. -## -## Not available on Model A/B boards. -## -## Default mmc. -## -#dtparam=pwr_led_trigger=mmc - -## pwr_led_activelow -## Set to "on" to invert the sense of the LED -## -## Not available on Model A/B boards. -## -## Default off. -## -#dtparam=pwr_led_activelow=off - -## pwr_led_gpio -## Set which GPIO to use for the PWR LED -## -## In case you want to connect it to an external device -## -## Not available on Model A/B boards. -## -## Default 35. -## -#dtparam=pwr_led_gpio=35 - -dtoverlay=dwc2 -dtparam=spi=on -dtoverlay=spi1-3cs - -# Disable bluetooth -dtoverlay=pi3-disable-bt -# Disable audio -dtparam=audio=off - diff --git a/sdcard/boot/ssh b/sdcard/boot/ssh deleted file mode 100644 index e69de29b..00000000 diff --git a/sdcard/rootfs/etc/hostname b/sdcard/rootfs/etc/hostname deleted file mode 100644 index 4a580070..00000000 --- a/sdcard/rootfs/etc/hostname +++ /dev/null @@ -1 +0,0 @@ -alpha diff --git a/sdcard/rootfs/etc/hosts b/sdcard/rootfs/etc/hosts deleted file mode 100644 index 02498b0e..00000000 --- a/sdcard/rootfs/etc/hosts +++ /dev/null @@ -1,6 +0,0 @@ -127.0.0.1 localhost alpha alpha.local -::1 localhost ip6-localhost ip6-loopback -fe00::0 ip6-localnet -ff00::0 ip6-mcastprefix -ff02::1 ip6-allnodes -ff02::2 ip6-allrouters diff --git a/sdcard/rootfs/etc/motd b/sdcard/rootfs/etc/motd deleted file mode 100644 index 6c867782..00000000 --- a/sdcard/rootfs/etc/motd +++ /dev/null @@ -1 +0,0 @@ -(◕‿‿◕) alpha (pwnagotchi) diff --git a/sdcard/rootfs/etc/network/interfaces b/sdcard/rootfs/etc/network/interfaces deleted file mode 100644 index 2c84f3c9..00000000 --- a/sdcard/rootfs/etc/network/interfaces +++ /dev/null @@ -1,17 +0,0 @@ -auto lo - -iface lo inet loopback - -allow-hotplug wlan0 -iface wlan0 inet static - -allow-hotplug eth0 -iface eth0 inet dhcp - -allow-hotplug usb0 -iface usb0 inet static - address 10.0.0.2 - netmask 255.255.255.0 - network 10.0.0.0 - broadcast 10.0.0.255 - gateway 10.0.0.1 diff --git a/sdcard/rootfs/etc/rc.local b/sdcard/rootfs/etc/rc.local deleted file mode 100755 index bab03e66..00000000 --- a/sdcard/rootfs/etc/rc.local +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -e -# -# rc.local -# -# This script is executed at the end of each multiuser runlevel. -# Make sure that the script will "exit 0" on success or any other -# value on error. -# -# In order to enable or disable this script just change the execution -# bits. -# -# By default this script does nothing. -# Powersave (Disable HDMI) ~30ma -sleep 10 -if ! /opt/vc/bin/tvservice -s | grep HDMI; then - /opt/vc/bin/tvservice -o -fi -/root/pwnagotchi/scripts/startup.sh & -exit 0 diff --git a/sdcard/rootfs/etc/ssh/sshd_config b/sdcard/rootfs/etc/ssh/sshd_config deleted file mode 100644 index e2f34f6b..00000000 --- a/sdcard/rootfs/etc/ssh/sshd_config +++ /dev/null @@ -1,121 +0,0 @@ -# $OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options override the -# default value. - -#Port 22 -#AddressFamily any -#ListenAddress 0.0.0.0 -#ListenAddress :: - -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_ecdsa_key -#HostKey /etc/ssh/ssh_host_ed25519_key - -# Ciphers and keying -#RekeyLimit default none - -# Logging -#SyslogFacility AUTH -#LogLevel INFO - -# Authentication: - -#LoginGraceTime 2m -PermitRootLogin yes -#StrictModes yes -#MaxAuthTries 6 -#MaxSessions 10 - -#PubkeyAuthentication yes - -# Expect .ssh/authorized_keys2 to be disregarded by default in future. -#AuthorizedKeysFile .ssh/authorized_keys .ssh/authorized_keys2 - -#AuthorizedPrincipalsFile none - -#AuthorizedKeysCommand none -#AuthorizedKeysCommandUser nobody - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -#HostbasedAuthentication no -# Change to yes if you don't trust ~/.ssh/known_hosts for -# HostbasedAuthentication -#IgnoreUserKnownHosts no -# Don't read the user's ~/.rhosts and ~/.shosts files -#IgnoreRhosts yes - -# To disable tunneled clear text passwords, change to no here! -#PasswordAuthentication yes -#PermitEmptyPasswords no - -# Change to yes to enable challenge-response passwords (beware issues with -# some PAM modules and threads) -ChallengeResponseAuthentication no - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no - -# GSSAPI options -#GSSAPIAuthentication no -#GSSAPICleanupCredentials yes -#GSSAPIStrictAcceptorCheck yes -#GSSAPIKeyExchange no - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication and -# PasswordAuthentication. Depending on your PAM configuration, -# PAM authentication via ChallengeResponseAuthentication may bypass -# the setting of "PermitRootLogin without-password". -# If you just want the PAM account and session checks to run without -# PAM authentication, then enable this but set PasswordAuthentication -# and ChallengeResponseAuthentication to 'no'. -UsePAM yes - -#AllowAgentForwarding yes -#AllowTcpForwarding yes -#GatewayPorts no -X11Forwarding yes -#X11DisplayOffset 10 -#X11UseLocalhost yes -#PermitTTY yes -PrintMotd no -#PrintLastLog yes -#TCPKeepAlive yes -#PermitUserEnvironment no -#Compression delayed -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#UseDNS no -#PidFile /var/run/sshd.pid -#MaxStartups 10:30:100 -#PermitTunnel no -#ChrootDirectory none -#VersionAddendum none - -# no default banner path -#Banner none - -# Allow client to pass locale environment variables -AcceptEnv LANG LC_* - -# override default of no subsystems -Subsystem sftp /usr/lib/openssh/sftp-server - -# Example of overriding settings on a per-user basis -#Match User anoncvs -# X11Forwarding no -# AllowTcpForwarding no -# PermitTTY no -# ForceCommand cvs server diff --git a/sdcard/rootfs/root/pwnagotchi/data/images/face_happy.bmp b/sdcard/rootfs/root/pwnagotchi/data/images/face_happy.bmp deleted file mode 100644 index 8f3e857b..00000000 Binary files a/sdcard/rootfs/root/pwnagotchi/data/images/face_happy.bmp and /dev/null differ diff --git a/sdcard/rootfs/usr/bin/cpuusage b/sdcard/rootfs/usr/bin/cpuusage deleted file mode 100755 index ea9e63a8..00000000 --- a/sdcard/rootfs/usr/bin/cpuusage +++ /dev/null @@ -1,51 +0,0 @@ -#!/usr/bin/gawk -f -#------------------------------------------------------------------------------- -# ~/bin/cpustat : display cpu utilization -# -# usage : normally used as a GNU/screen backtick -# -# notes : 1. Works on the assumption that /proc/stat's first line -# : has the total "jiffies" since boot up used by the -# : different types of tasks in the system. See the -# : filesystems/proc.txt document in kernel source tree -# : -# : 2. Displays a total CPU% (user+system+nice) as well as -# : user CPU% system CPU% and nice CPU% -#------------------------------------------------------------------------------- -BEGIN { - file = "/proc/stat" - while (getline < file) { # read first line - # extract jiffies: - user=$2-user_saved; # . user - nice=$3-nice_saved; # . nice user - syst=$4-syst_saved; # . system - idle=$5-idle_saved; # . idle - wait=$6-wait_saved; # . iowait - irqs=$7-irqs_saved; # . irq - sirq=$8-sirq_saved; # . softirq - - cact=user+syst+nice; # what counts - ctot=user+nice+syst+idle+wait+irqs+sirq; # total activity - - tcpu=cact/ctot*100; # total % cpu utilization - ucpu=user/ctot*100; # user % cpu utilization - scpu=syst/ctot*100; # system % cpu utilization - ncpu=nice/ctot*100; # nice % cpu utilization - - printf "%.1f %%\n",tcpu - - - user_saved=$2; # save the current jiffies - nice_saved=$3; # values for the next loop - syst_saved=$4; - idle_saved=$5; - wait_saved=$6; - irqs_saved=$7; - sirq_saved=$8; - - close(file) # re-read file - - system("sleep 3") - } -} - diff --git a/sdcard/rootfs/usr/bin/memusage b/sdcard/rootfs/usr/bin/memusage deleted file mode 100755 index 14efdb14..00000000 --- a/sdcard/rootfs/usr/bin/memusage +++ /dev/null @@ -1 +0,0 @@ -free -m | grep Mem | awk {'printf( "%.1f %", $3 / $2 * 100 )'} diff --git a/sdcard/rootfs/usr/bin/monstart b/sdcard/rootfs/usr/bin/monstart deleted file mode 100755 index 112c65e9..00000000 --- a/sdcard/rootfs/usr/bin/monstart +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/bash -iw phy phy0 interface add mon0 type monitor && ifconfig mon0 up diff --git a/sdcard/rootfs/usr/bin/monstop b/sdcard/rootfs/usr/bin/monstop deleted file mode 100755 index 8ca7f89d..00000000 --- a/sdcard/rootfs/usr/bin/monstop +++ /dev/null @@ -1,2 +0,0 @@ -#!/bin/bash -ifconfig mon0 down && iw dev mon0 del