pwnagotchi/builder/data/etc/network/interfaces.d/usb0-cfg

allow-hotplug usb0
iface usb0 inet static
  address 10.0.0.2
  netmask 255.255.255.0
  network 10.0.0.0
  broadcast 10.0.0.255
  gateway 10.0.0.1
  metric 203
fix: the auto-update plugin now also installs launchers and service files via setup.py (closes #470) 2019-10-31 12:48:15 +01:00			`allow-hotplug usb0`
			`iface usb0 inet static`
			`address 10.0.0.2`
			`netmask 255.255.255.0`
			`network 10.0.0.0`
			`broadcast 10.0.0.255`
Make sure IPv4 works when eth0 is connected Resolves an issue where IPv4 traffic would not work when eth0 is connected (i.e. usb-ethernet adapter over OTG). The static route for usb0 precedes the DHCP route for eth0. Only IPv6 traffic would work, but not IPv4 until the metric for usb0 is increase and thus lowered in priority. If no eth0 is plugged in, internet works fine over usb0. 2020-09-04 17:49:41 +08:00			`gateway 10.0.0.1`
v2.4.6 Signed-off-by: Jeroen Oudshoorn <oudshoorn.jeroen@gmail.com> 2023-10-05 20:51:02 +02:00			`metric 203`