From df99aa446cf2a9353ecec92b24f968d821bdf0e0 Mon Sep 17 00:00:00 2001 From: GadgetAngel Date: Thu, 13 Jan 2022 21:48:22 -0500 Subject: [PATCH] Update README --- README.md | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/README.md b/README.md index 173d330..6a5a881 100644 --- a/README.md +++ b/README.md @@ -644,6 +644,9 @@ set Communication interface to (USB (on PA11/PA12)) The firmware will compile. +>B +>Q + You will now have to use a micro-SD card to flash the Octopus board with the new firmware. The Octopus board will not update the firmware via USB cable! After you have copied the out\Klipper.bin file over to your PC (using Winscp) and onto the micro-SD card, please rename the "klipper.bin" file to "firmware.bin". Once you place the micro-SD card into the @@ -677,6 +680,9 @@ set Communication interface to (USB (on PA11/PA12)) The firmware will compile. +>B +>Q + You will now have to use a micro-SD card to flash the Octopus board with the new firmware. The Octopus board will not update the firmware via USB cable! After you have copied the out\Klipper.bin file over to your PC (using Winscp) and onto the micro-SD card, please rename the "klipper.bin" file to "firmware.bin". Once you place the micro-SD card into the @@ -709,6 +715,9 @@ set Communication interface to (USB (on PA11/PA12)) The firmware will compile. +>B +>Q + You will now have to use a micro-SD card to flash the Octopus board with the new firmware. The Octopus board will not update the firmware via USB cable! After you have copied the out\Klipper.bin file over to your PC (using Winscp) and onto the micro-SD card, please rename the "klipper.bin" file to "firmware.bin". Once you place the micro-SD card into the