From c0a68f18d1d94c1fd8f55181b572f8637d07c72e Mon Sep 17 00:00:00 2001 From: GadgetAngel Date: Mon, 20 Dec 2021 13:31:13 -0500 Subject: [PATCH] Update README --- CAD/QUEEN_Voron_2.4_Build.f3d | 3 ++ Electronics_Case_Wiring_Diagram/README.md | 33 +++++++++++++++++++--- README.md | 34 ++++++++++++++++++++--- 3 files changed, 62 insertions(+), 8 deletions(-) create mode 100644 CAD/QUEEN_Voron_2.4_Build.f3d diff --git a/CAD/QUEEN_Voron_2.4_Build.f3d b/CAD/QUEEN_Voron_2.4_Build.f3d new file mode 100644 index 0000000..e7c1ffc --- /dev/null +++ b/CAD/QUEEN_Voron_2.4_Build.f3d @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1c232435291fe7dd983567dba79c57c408603873f67e42a3de933eb8e455ffc3 +size 506354128 diff --git a/Electronics_Case_Wiring_Diagram/README.md b/Electronics_Case_Wiring_Diagram/README.md index f46f54b..774d884 100644 --- a/Electronics_Case_Wiring_Diagram/README.md +++ b/Electronics_Case_Wiring_Diagram/README.md @@ -43,16 +43,41 @@ I have used the CAD models from each MOD (listed below) and incorporated the res 3. If you upload .f3d sub-Assembly file and all sub-assembly option are turn on, then please just turn off the sub-assemblies you do not want to see. I exported the .STEP files at the same time I was creating the .f3d files, so I might have left all the option turned on so I could save the .STEP file. +4. I have noticed that if one uses the "save a copy as ..." option that parts will loose their postion (x,y,z). So to create the sub-assemblies I did a "copy" to the clip board and then placed into a new file and saved. So if you would like the full model in STEP format, just take each sub-assembly and past them all back together via the clip-board. Each sub-assembly will be properly placed (without your assistance), just accept the default location when you do the "paste". GadgetAngel's Voron 2.4 Fusion 360 CAD model (.f3d) and (.STEP) files: -1. +The full model only has a fusion 360 (.f3d) file. The STEP files are from the sub-assemblies. This way I could turn on all the options in the sub-assemblies and create the STEP files. To create a STEP file for the full model is just to many options. -2. +1. [QUEEN's Voron 2.4 Fusion 360 model](../CAD) -3. [QUEEN's Voron 2.4 Fusion 360 subAssembly models](../CAD) +2. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for the Electronics from the Bottom Electronics Case](../CAD/Electronics_forBottom_Electronic_Case) -4. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly models](../CAD) +3. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for the Electronics from the Bottom Electronics Case](../CAD/Electronics_forBottom_Electronic_Case) + +4. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for Electronics from the LitterBox Case](../CAD/Electronics_forLitterBox_Case) + +5. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for Electronics from the LitterBox Case](../CAD/Electronics_forLitterBox_Case) + +6. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for the LEDs](../CAD/LEDs) + +7. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for the LEDs](../CAD/LEDs) + +8. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for all Panels & Clips](../CAD/Panel_Mounting) + +9. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for all Panels & Clips](../CAD/Panel_Mounting) + +10. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for all Skirts](../CAD/Skirts) + +11. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for all Skirts](../CAD/Skirts) + +12. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for all the mods located under the Heated Bed & a Filament Runout Sensor](../CAD/Under_Heated_Bed) + +13. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for all the mods located under the Heated Bed & a Filament Runout Sensor](../CAD/Under_Heated_Bed) + +14. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for my Z Driver Tensioner Mod](../CAD/Z_Drive) + +15. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for for my Z Driver Tensioner Mod](../CAD/Z_Drive) --- diff --git a/README.md b/README.md index dbbfdea..bafcab4 100644 --- a/README.md +++ b/README.md @@ -52,16 +52,42 @@ I have used the CAD models from each MOD (listed below) and incorporated the res 3. If you upload .f3d sub-Assembly file and all sub-assembly option are turn on, then please just turn off the sub-assemblies you do not want to see. I exported the .STEP files at the same time I was creating the .f3d files, so I might have left all the option turned on so I could save the .STEP file. +4. I have noticed that if one uses the "save a copy as ..." option that parts will loose their postion (x,y,z). So to create the sub-assemblies I did a "copy" to the clip board and then placed into a new file and saved. So if you would like the full model in STEP format, just take each sub-assembly and past them all back together via the clip-board. Each sub-assembly will be properly placed (without your assistance), just accept the default location when you do the "paste". + GadgetAngel's Voron 2.4 Fusion 360 CAD model (.f3d) and (.STEP) files: -1. +The full model only has a fusion 360 (.f3d) file. The STEP files are from the sub-assemblies. This way I could turn on all the options in the sub-assemblies and create the STEP files. To create a STEP file for the full model is just to many options. -2. +1. [QUEEN's Voron 2.4 Fusion 360 model](./CAD) -3. [QUEEN's Voron 2.4 Fusion 360 subAssembly models](./CAD) +2. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for the Electronics from the Bottom Electronics Case](./CAD/Electronics_forBottom_Electronic_Case) -4. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly models](./CAD) +3. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for the Electronics from the Bottom Electronics Case](./CAD/Electronics_forBottom_Electronic_Case) + +4. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for Electronics from the LitterBox Case](./CAD/Electronics_forLitterBox_Case) + +5. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for Electronics from the LitterBox Case](./CAD/Electronics_forLitterBox_Case) + +6. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for the LEDs](./CAD/LEDs) + +7. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for the LEDs](./CAD/LEDs) + +8. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for all Panels & Clips](./CAD/Panel_Mounting) + +9. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for all Panels & Clips](./CAD/Panel_Mounting) + +10. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for all Skirts](./CAD/Skirts) + +11. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for all Skirts](./CAD/Skirts) + +12. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for all the mods located under the Heated Bed & a Filament Runout Sensor](./CAD/Under_Heated_Bed) + +13. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for all the mods located under the Heated Bed & a Filament Runout Sensor](./CAD/Under_Heated_Bed) + +14. [QUEEN's Voron 2.4 Fusion 360 subAssembly model for my Z Driver Tensioner Mod](./CAD/Z_Drive) + +15. [QUEEN's Voron 2.4 STEP version of the Fusion 360 subAssembly model for for my Z Driver Tensioner Mod](./CAD/Z_Drive) ---