diff --git a/Electronics_Case_Wiring_Diagram/README.md b/Electronics_Case_Wiring_Diagram/README.md index 08327e9..cac2ae8 100644 --- a/Electronics_Case_Wiring_Diagram/README.md +++ b/Electronics_Case_Wiring_Diagram/README.md @@ -50,33 +50,38 @@ GadgetAngel's Voron 2.4 Fusion 360 CAD model (.f3d) and (.STEP) files: The full model for QUEEN has a fusion 360 (.f3d) file and STEP file. The STEP file for the full model has been integrated by myself from all the sub-assemblies STEP files. This way I could check the sub-assembly files to ensure that they were created correctly. -1. [QUEEN's Voron 2.4 Fusion 360 model and STEP version](../CAD) +1. [QUEEN's Voron 2.4 Fusion 360 model and STEP version](../CAD/QUEEN_Voron_2.4_Build_ZIP_files) -2. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Electronics from the Bottom Electronics Case](../CAD/Electronics_forBottom_Electronic_Case) +2. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Electronics from the Bottom Electronics Case](../CAD/Electronics_forBottom_Electronic_Case/ZIP_files) -3. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for Electronics from the LitterBox Case](../CAD/Electronics_forLitterBox_Case) +3. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for Electronics from the LitterBox Case](../CAD/Electronics_forLitterBox_Case/ZIP_files) -4. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the LEDs](../CAD/LEDs) +4. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the LEDs](../CAD/LEDs/ZIP_files) -5. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all Panels & Clips, see this directory for additional sub-assemblies for different panels](../CAD/Panel_Mounting) +5. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all Panels & Clips](../CAD/Panel_Mounting/QUEENv98_SubAssmbly_Panel&Clips_ZIP_files) -6. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all Skirts, see this directory for additional sub-assemblies for different Skirts (i.e., Front Skirt, Left-Side Skirt, etc.)](../CAD/Skirts) +6. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for different panels, see this directory for additional sub-assemblies](../CAD/Panel_Mounting) -7. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all the mods located under the Heated Bed & a Filament Runout Sensor](../CAD/Under_Heated_Bed) +7. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all Skirts](../CAD/Skirts/QUEENv98_SubAssmbly_ALL_Skirts_ZIP_files) -8. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for my Z Driver Tensioner Mod](../CAD/Z_Drive) +8. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for different Skirts (i.e., Front Skirt, Left-Side Skirt, etc.), see this directory for additional sub-assemblies](../CAD/Skirts) -9. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Exhaust Filter](../CAD/Ehaust_Filter) +9. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all the mods located under the Heated Bed & a Filament Runout Sensor](../CAD/Under_Heated_Bed/ZIP_files) -10. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Frame](../CAD/Frame) +10. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for my Z Driver Tensioner Mod](../CAD/Z_Drive/ZIP_files) -11. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Gantry](../CAD/Gantry) +11. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Exhaust Filter](../CAD/Ehaust_Filter/ZIP_file) -12. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Litter Box Mod and its sub-assemblies, see this directory for additional sub-assemblies](../CAD/Litter_Box_CAD) +12. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Frame](../CAD/Frame/ZIP_files) -13. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Z-Endstop called the "SexBolt Z-Endstop"](../CAD/Z_Endstop) +13. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Gantry](../CAD/Gantry/ZIP_files) + +14. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Litter Box Mod and its sub-assemblies, see this directory for additional sub-assemblies](../CAD/Litter_Box_CAD) + +15. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Z-Endstop called the "SexBolt Z-Endstop"](../CAD/Z_Endstop/ZIP_files) + +16. [QUEEN's Voron 24 Fusion 360 subAssembly model (.f3d) and .STEP version for the BTT piTFT V2.0 articulating arm with display mount](../CAD/Skirts/Front/Middle/ZIP_files) -14. [QUEEN's Voron 24 Fusion 360 subAssembly model (.f3d) and .STEP version for the BTT piTFT V2.0 articulating arm with display mount](../CAD/Skirts/Front/Middle) --- diff --git a/README.md b/README.md index 3848832..0d19df2 100644 --- a/README.md +++ b/README.md @@ -59,33 +59,37 @@ GadgetAngel's Voron 2.4 Fusion 360 CAD model (.f3d) and (.STEP) files: The full model for QUEEN has a fusion 360 (.f3d) file and STEP file. The STEP file for the full model has been integrated by myself from all the sub-assemblies STEP files. This way I could check the sub-assembly files to ensure that they were created correctly. -1. [QUEEN's Voron 2.4 Fusion 360 model and STEP version](./CAD) +1. [QUEEN's Voron 2.4 Fusion 360 model and STEP version](./CAD/QUEEN_Voron_2.4_Build_ZIP_files) -2. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Electronics from the Bottom Electronics Case](./CAD/Electronics_forBottom_Electronic_Case) +2. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Electronics from the Bottom Electronics Case](./CAD/Electronics_forBottom_Electronic_Case/ZIP_files) -3. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for Electronics from the LitterBox Case](./CAD/Electronics_forLitterBox_Case) +3. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for Electronics from the LitterBox Case](./CAD/Electronics_forLitterBox_Case/ZIP_files) -4. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the LEDs](./CAD/LEDs) +4. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the LEDs](./CAD/LEDs/ZIP_files) -5. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all Panels & Clips, see this directory for additional sub-assemblies for different panels](./CAD/Panel_Mounting) +5. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all Panels & Clips](./CAD/Panel_Mounting/QUEENv98_SubAssmbly_Panel&Clips_ZIP_files) -6. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all Skirts, see this directory for additional sub-assemblies for different Skirts (i.e., Front Skirt, Left-Side Skirt, etc.)](./CAD/Skirts) +6. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for different panels, see this directory for additional sub-assemblies](./CAD/Panel_Mounting) -7. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all the mods located under the Heated Bed & a Filament Runout Sensor](./CAD/Under_Heated_Bed) +7. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all Skirts](./CAD/Skirts/QUEENv98_SubAssmbly_ALL_Skirts_ZIP_files) -8. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for my Z Driver Tensioner Mod](./CAD/Z_Drive) +8. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for different Skirts (i.e., Front Skirt, Left-Side Skirt, etc.), see this directory for additional sub-assemblies](./CAD/Skirts) -9. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Exhaust Filter](./CAD/Ehaust_Filter) +9. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for all the mods located under the Heated Bed & a Filament Runout Sensor](./CAD/Under_Heated_Bed/ZIP_files) -10. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Frame](./CAD/Frame) +10. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for my Z Driver Tensioner Mod](./CAD/Z_Drive/ZIP_files) -11. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Gantry](./CAD/Gantry) +11. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Exhaust Filter](./CAD/Ehaust_Filter/ZIP_file) -12. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Litter Box Mod and its sub-assemblies, see this directory for additional sub-assemblies](./CAD/Litter_Box_CAD) +12. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Frame](./CAD/Frame/ZIP_files) -13. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Z-Endstop called the "SexBolt Z-Endstop"](./CAD/Z_Endstop) +13. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Gantry](./CAD/Gantry/ZIP_files) -14. [QUEEN's Voron 24 Fusion 360 subAssembly model (.f3d) and .STEP version for the BTT piTFT V2.0 articulating arm with display mount](./CAD/Skirts/Front/Middle) +14. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Litter Box Mod and its sub-assemblies, see this directory for additional sub-assemblies](./CAD/Litter_Box_CAD) + +15. [QUEEN's Voron 2.4 Fusion 360 subAssembly model (.f3d) and .STEP versions for the Z-Endstop called the "SexBolt Z-Endstop"](./CAD/Z_Endstop/ZIP_files) + +16. [QUEEN's Voron 24 Fusion 360 subAssembly model (.f3d) and .STEP version for the BTT piTFT V2.0 articulating arm with display mount](./CAD/Skirts/Front/Middle/ZIP_files) ---