Annex-Engineering-Redoubt-Test/Voron2.4_My_Build_Log
1
0
Fork 0
mirror of https://github.com/Annex-Engineering-Redoubt-Test/Voron2.4_My_Build_Log.git synced 2025-07-02 01:37:26 -04:00
Code Issues Packages Projects Releases Wiki Activity

Update README

Browse Source
This commit is contained in:
GadgetAngel
2022-01-07 09:44:33 -05:00
parent d9e42710d3
commit 8fc2cadb8d
1 changed files with 1 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Electronics_Case_Wiring_Diagram/README.md
View File

@ -115,7 +115,7 @@ The filament runout sensor and filament jam detection will be looked at when I d
These two features have been incorporated into the AC electrical wiring diagram. I am using BTT's relay V1.2 to perform the "automatic shutdown after print finishes" feature and I am using BTT's UPS module to perform the "resume 3D print after power failure" feature. I also added in another set of relays to allow the Raspberry Pi to remotely shutdown the Voron 2.4 printer (along with the PSU, except for the PSU that supplies 5VDC power for the Raspberry Pi). I also have a mechanical Hour-counter and Engergy Meter incorporated in the front and side skirt of my Voron 2.4 printer that I need to control. The Energy Meter will always be on when the Voron 2.4 printer is powered up (it is located on the right-hand side of my printer). The mechanical Hour-Counter will only run when the Voron 2.4 printer is actually producing a 3D part and is located on the front skirt. This way I can see the number of actual hours of print time. This Hour-Counter runs throughgh a relay so I can control when it is turned on. These two features have been incorporated into the AC electrical wiring diagram. I am using BTT's relay V1.2 to perform the "automatic shutdown after print finishes" feature and I am using BTT's UPS module to perform the "resume 3D print after power failure" feature. I also added in another set of relays to allow the Raspberry Pi to remotely shutdown the Voron 2.4 printer (along with the PSU, except for the PSU that supplies 5VDC power for the Raspberry Pi). I also have a mechanical Hour-counter and Engergy Meter incorporated in the front and side skirt of my Voron 2.4 printer that I need to control. The Energy Meter will always be on when the Voron 2.4 printer is powered up (it is located on the right-hand side of my printer). The mechanical Hour-Counter will only run when the Voron 2.4 printer is actually producing a 3D part and is located on the front skirt. This way I can see the number of actual hours of print time. This Hour-Counter runs throughgh a relay so I can control when it is turned on.
The BTT's relay V1.2 are relays that are normally closed (NO) so when I added my additional relay I needed to ensure that I could configure it to be NC. The relay that controls the Hour-counter is NO type of relay. The BTT's relay V1.2 are relays that are normally closed (NO) so when I added my additional relay I needed to ensure that I could configure it to be NO or NC. The relay that controls the Hour-counter is NO type of relay.
I also want the capability to use momentary switches on the left-hand side and right-hand side of my printer to power up or down the Voron 2.4. These momentary switches are active low and are hardwired directly into the relays so that software is not needed to control them. I call these my "hardware reboot switches". These switches will only reboot the Voron 2.4 (not the Raspberry Pi). The switch that is on the back of the Voron 2.4 will reboot both the Raspberry Pi and the Voron 2.4 printer. I will also mount a "mini Red push button (momentary switch)" to one of the keyholes on the Voron 2.4 skirt which allows me to reboot the Voron 2.4 printer via the BTT's relay V 1.2 modules. I also want the capability to use momentary switches on the left-hand side and right-hand side of my printer to power up or down the Voron 2.4. These momentary switches are active low and are hardwired directly into the relays so that software is not needed to control them. I call these my "hardware reboot switches". These switches will only reboot the Voron 2.4 (not the Raspberry Pi). The switch that is on the back of the Voron 2.4 will reboot both the Raspberry Pi and the Voron 2.4 printer. I will also mount a "mini Red push button (momentary switch)" to one of the keyholes on the Voron 2.4 skirt which allows me to reboot the Voron 2.4 printer via the BTT's relay V 1.2 modules.