Annex-Engineering-Redoubt-Test/Voron2.4_My_Build_Log
1
0
Fork 0
mirror of https://github.com/Annex-Engineering-Redoubt-Test/Voron2.4_My_Build_Log.git synced 2025-07-02 01:37:26 -04:00
Code Issues Packages Projects Releases Wiki Activity

Update README

Browse Source
This commit is contained in:
GadgetAngel
2022-01-07 09:57:21 -05:00
parent 65060f3b34
commit 88b9d6daea
1 changed files with 3 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
Electronics_Case_Wiring_Diagram/README.md
View File

@ -133,11 +133,11 @@ Since the Raspberry Pi is a 3.3V logic device, I use [3.6V Zener Diodes](https:/
Below you will find the JPG and the PDF files for the "Voron 2.4 AC Electrical Wiring Diagram".
After finding a [schematic diagram of the BTT relay V1.2 from a russian website](https://github.com/GadgetAngel/Voron2.4_My_Build_Log/blob/main/Resources/BTT%20Relay%20V1.2%20Schematic.pdf) I have become aware that I can control the PSUs witht the Raspberry Pi via the BTT Relay V1.2 modules with the use of a second relay module. Therefore the secondary relaymodule will only control the mechanical Hour-Counter. I have updated my AC Electrical Wiring Diagram to reflect this change.
After finding a [schematic diagram of the BTT relay V1.2 from a russian website](https://github.com/GadgetAngel/Voron2.4_My_Build_Log/blob/main/Resources/BTT%20Relay%20V1.2%20Schematic.pdf) I have become aware that I can control the PSUs with the Raspberry Pi via the BTT Relay V1.2 modules without the use of a second relay module. Therefore the secondary relay module will only control the mechanical Hour-Counter. I have updated my AC Electrical Wiring Diagram to reflect this change.
After a discussion in the Voron discord channel with other more experience Voron users the following question arose: "Does your printer even have the capacity to resume print? If the Gantry sags at all it won't, since you wouldn't be able to perform QGL with a buildplate already occupied.". Due to this fact using the BTT UPS modules is now out since I will not be able to get the flying gantery back to where it needs to be to resume a print. I will be removing the "resume after power failure" as a requirement for my Voron 2.4 printer.
After a discussion in the Voron discord channel with other more experienced Voron users the following question arose: "Does the Voron 2.4 printer even have the capacity to resume print? If the Gantry sags at all it won't, since you wouldn't be able to perform QGL with a buildplate already occupied.". Due to this fact using the BTT UPS modules is now out since I will not be able to get the flying gantery back to where it needs to be to resume a print. I will be removing the "resume after power failure" as a requirement for my Voron 2.4 printer.
Also another Voron user found a error in my first AC wiring diagram. I forgot to tie all my V- (DC negative voltage) terminal from each PSU together so that a common DC ground could be established. My new revised AC wiring diagram now has the V- terminals all tied together.
Also another Voron user found an error in my first AC wiring diagram. I forgot to tie all my V- (DC negative voltage) terminals together to establish a common voltage reference between different power supplies. My new revised AC wiring diagram now has the V- terminals all tied together.
## A Picture of the "Voron 2.4 AC Electrical Wiring Diagram" for QUEEN: