From 7c2cbdb266a4b45c252c1c0cd76885eeeba8fa56 Mon Sep 17 00:00:00 2001 From: GadgetAngel Date: Sat, 8 Jan 2022 09:41:39 -0500 Subject: [PATCH] Update README --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index 3ba80d5..f430be8 100644 --- a/README.md +++ b/README.md @@ -190,7 +190,7 @@ Note: this replaces the GE5C Mod; 23. [Ramalama2's "AB_Plug_Microfit mod"](https://github.com/Ramalama2/Voron-2-Mods/tree/main/AB_Plug_Microfit); or [AB_Plug_JST-XHmod](https://github.com/Ramalama2/Voron-2-Mods/tree/main/AB_Plug_JST-XH); or you could also use the Voron Design Team's ["Tie-down the AB motors cables to the Z-Beam Mod"](https://github.com/VoronDesign/Voron-2/blob/Voron2.2/STLs/VORON2.2/Gantry/%5Ba%5D_cable_anchor_x4_rev1.stl); -##### 24. [Ramalama2's "Panel_Clips"; I will use the midspan clips for sides and top](https://github.com/Ramalama2/Voron-2-Mods/tree/main/Panel_Clips); - (use 6mm version - 3mm panel and 3mm of foam tape); +##### 24. [Ramalama2's "Panel_Clips"; I will use the midspan clips for sides and top](https://github.com/Ramalama2/Voron-2-Mods/tree/main/Panel_Clips); - (use 6mm version - 3mm panel and 3mm of foam tape); 25. [Richardjm's "ADXL345 Mount Mod"](https://github.com/richardjm/VoronUsers/tree/richardjm/adxl-chain/printer_mods/richardjm/adxl-chain); I used information from [Padok's ADXL345 Mount](https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/padok/chain_anchor-ADXL345_mount); @@ -247,7 +247,7 @@ Note: this replaces the GE5C Mod; 49. [Voron Desing Team's "Z Rail end stops"](https://github.com/VoronDesign/Voron-2/blob/Voron2.2/STLs/VORON2.2/Gantry/%5Ba%5D_z_rail_stop_x4_rev1.stl); -50. [AlexanderT-Moss's 270-Clamping-Hinges for the front doors]((https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/AlexanderT-Moss/270-Clamping-Hinges)) [instead of Item #24's Front door clips](#24Ramalama2s-Panel_Clips-I-will-use-the-midspan-clips-for-sides-and-top); +50. [AlexanderT-Moss's 270-Clamping-Hinges for the front doors](https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/AlexanderT-Moss/270-Clamping-Hinges) [instead of Item #24's Front door clips](#24-ramalama2s-panel_clips-i-will-use-the-midspan-clips-for-sides-and-top---use-6mm-version---3mm-panel-and-3mm-of-foam-tape); 51. [AlchemyEngine's Skirt-Microfit-Inserts, I modified it so I could mount a Reset button for the BTT V1.2 Relays shown on my AC Wiring Diagram](https://github.com/alchemyEngine/EnragedRabbitProject/tree/main/usermods/Skirt-Microfit-Inserts);