diff --git a/README.md b/README.md
index 6bbcf19..70785fb 100644
--- a/README.md
+++ b/README.md
@@ -46,7 +46,7 @@ I have spent 3 months creating the 3D model of my QUEEN Voron 2.4 250mm³ build.
 
 I have used the CAD models from each MOD (listed below) and incorporated the respective MOD's CAD model into my QUEEN Fusion 360 model.  After working in Fusion 360 for the past 3 months I have become aware of a couple of things:
 
-1.  When exporting sub-Assemblies from Fusion 360 in .STEP format the only sub-assemblies that get put into the STEP file are the sub-assemblies that are visable at the time the exported STEP file is created.  So when you use STEP files expect all the sub-assemblies to be visable when you first open up the STEP file.  You will have to turn off the sub-assemblies that you do not want to see after you upload the STEP file to Fusion 360 9or your CAD software).
+1.  When exporting sub-Assemblies from Fusion 360 in .STEP format the only sub-assemblies that get put into the STEP file are the sub-assemblies that are visable at the time the exported STEP file is created.  So when you use STEP files expect all the sub-assemblies to be visable when you first open up the STEP file.  You will have to turn off the sub-assemblies that you do not want to see after you upload the STEP file to Fusion 360 (or your CAD software).
 
 2. If a MOD did not have a Fusion 360 CAD model, I used the .stl files from the MOD and used Fusion 360 to convert the .stl files into parametric bodies.