From 1306612666aea1b770ee5900813c938416cfd813 Mon Sep 17 00:00:00 2001 From: GadgetAngel Date: Wed, 12 Jan 2022 09:53:09 -0500 Subject: [PATCH] Update README --- Electronics_Case_Wiring_Diagram/README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Electronics_Case_Wiring_Diagram/README.md b/Electronics_Case_Wiring_Diagram/README.md index 8c89384..75cc584 100644 --- a/Electronics_Case_Wiring_Diagram/README.md +++ b/Electronics_Case_Wiring_Diagram/README.md @@ -205,7 +205,7 @@ and The Seeeduino XIAO microcontroller and sensors are powered through the USB C cable from the RaspberryPi USB port while the stepper motor drivers are powered by the ERCF Easy Board's PSU (12/24V) on-board connector. -So all the connection on the ERCF Easy Board will send data to the rapberry pi via USB. The only connections to the Octopus Pro board we need to make are the following: +#### So all the connection on the ERCF Easy Board will send data to the rapberry pi via USB. The only connections to the Octopus Pro board we need to make are the following: 1. Klicky_Probe connected to the "XES" connector of the ERCF v.3 toolhead board to the "STOP_7" endstop connector of the Octopus Pro board (on the LDO Kit they refer to this as the "Z Probe" line).